Speaker stands for SBS 560

Does anyone know where I can find speaker stands compatible with the SBS 560?
Thanks in advance!

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Similar Messages

Speaker Stands for I-trigue 5600

hey
I just bought I-trigue 5600 system and i was intending to get back speaker stands so that i can have them positioned properly.
Creative sight is not giving me any accessories for I-Trigue 5600 does any one know what are the stand style number of part number and where can i get those from in Australia
Any help will be appreciated
regards

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

Speaker stands for ProGamer G500

Does anybody know speaker stands that are compitable with the Creative Gigaworks ProGamer G500?

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Where to buy Speaker Stands for my Creative Inspire T7900 System in Germany?

Hi,
I'm trying to buy the MT-1200 Speaker Stands here in Germany. Any help where I could get them (even outside Germany) would be appreciated.
Thanks!
htg

Here is what will work using your existing 4-3 cable and an extra 3.5mm cable. First unplug all the cables from the back of your card and your woofer. Then plug your new 3.5 cable (make sure you are using a stereo cable and not a mono one) into the black on the back of your card and the black (rear speakers) on the back of your woofer. Then reverse your 4-3 cable that came with your speakers. Take the 4 side of the plug and use that end on your card instead of the speaker side. With the 4 plugs hook the green plug to green on the card, orange plug to orange on the card and black plug to grey on the card. You do not need to use the grey plug, so just let it hang there or whatever. On the end with the three plugs, on the back of your woofer hook the green plug to green (front speakers), orange plug to orange (center and subwoofer) and the black plug to black (side speakers.) This is the only way that it would work for me. Simply unhooking the grey on the subwoofer and running an extra cable from there to the grey on the back of the card did not work for me. It has to do with the way Creative has the 4-3 plug wired and it combines rear and side speakers. You will notice this if you look at the colored plugs and compare the number of rings on the male plugs; some have two and some have three for the different channels. When I simply run an extra wire from grey to grey it still cuts out half my speakers. The above way I outlined works awesome and gives me true 7.1 sound. Good luck!

Creative MT-1200 Speaker Stands for T7900 (UK)

I have eventually got my T7900 kit but i have found that i need stands for the rear speakers. It advertises them all over the box as the MT-1200 model. When i checked the Creative Shop (UK) it states that they are not in stock (37.8 inc vat). I cannot find them anywhere else for the UK (Amazon, Ebay etc). Anybody got any ideas as to where i could get a pair of speaker stands?cheers Steve

Of course about long ones. http://www.creative.com/products/pro...30&product=955

Availability of Speaker Stand in India

Can anyone tell me if rear-speaker stand for Inspire 5200 5.1 system is available in India? I have searched a lot of place, no one has been able to help me. I think the model number would be MT1200 or MT1100. It would be great if you could tell me a website from where I can buy it online. Thanks.

I also require MT 1500 stands for megaworks thx 550.No one is able to help me in Pakistan. I also went to the creative distributors in Islamabad but they also cut a sorry figure.

Creative Labs SBS 560 Stereo Speaker Set

Hi, I'm planning on buying the , saw it here:
http://www.hcw.be/hcwcs/p.asp?mscssid=&p=F793&d=L#ld
My question is, does this speaker system uses the headphone jack to connect?
example:
http://www.cewindows.net/reviews/032005.JPG
Because I have a 2.1 speaker system, and I can connect this to my xga-box (little machine to connect my gamecube or xbox to my monitor)
http://www.futuremax.nl/images/xb/bg/650.jpg
(I put the cable from my 2.1 system in the side)
And I need to know if I a) Can connect this 5.1 system to my xga-box
b) Will have sound through all the speakers, including the
subwoofer?
Any advice would be appreciated

Bruuss,
Any of the Creative soundcard that's advertised as supporting 5.1 speaker system or higher is compatible with the SBS 560 and yes, the Audigy 2 ZS is compatible with the SBS 560.
As for connecting two output device, you can get a stereo splitter adaptor so both the speaker and headphone can share the audio output jack.
Jason

Still have 6 inspire mt1200 speaker stand adaptors available for trade

I have the 750 Gigaworks Speakers and now have a total of six Creative MT-1200 speaker stands. Only needed four until I broke one of the adapters, so I had to buy two more stands. (You can't buy the adapters separately here in the US)? If anyone out there isn't using the Megaworks/Gigaworks adapters from the stand kit, I would be happy to trade for the other Creative Inspire adapters that came along with my sets of speaker stands. Let me know if anyone has the adapters I need. They are so flimsy it seems so silly and extremely expensive to have to pay $70 plus shipping, just to replace two small adapters. Hope Creative will fix this little problem in the future. luvmyrescuedogsTucson,AZUSAThe 6 plastic adaptors that I still have available, fit the Inspire Speakers. They are the plastic ones that are horizontal and have one hole in them. The other long vertical Inspire Adaptors have already been traded to a forum member from The Netherlands.
I believe he said his Creative speakers were the Inspire 5700sAnyway, if anyone has the ones for my S750 Gigaworks, that I can trade for, please let me know.

First, let me thank the two Creative forum members who were able to trade their extra speaker stand plastic adapters to me for the extras ones that I have. It is very much appreciated. Now, if there is a forum moderator reading this message, then would it be possible to pass along my frustrations on being unable to order these very essential parts from Creative here in the US? Surely, I can't be the only person who's metal speaker stand has fallen over and broken that little plastic adapter. These stands are very prone to tipping over. If nothing else, why not make that adapter out of metal? When ordering our stands, why not let us just buy the adapters that fit our particular speaker, instead of giving us extras for two other models? These speaker stands are very overpriced and it seems wasteful to have to junk them because of the weakness of a little plastic part or to have to buy extra stands just to get the part needed. luvmyrescuedogs

Apparently faulty new SBS 560 speakers: advice needed!

I'll appreciate any advice people can give me!
Last week, I bought a SBS 560 5.1 speaker system from an online retailer called Komplett. Having just moved into a new flat, I didn't get to test them until yesterday. When plugged in, and even when not connected to the PC, they make an alarming "humming" noise - most of this noise comes from the sub. Furthermore, whenever I turn them off, they make a brief "screeching" noise. Music played through them is a little distorted, and the humming appears to grow - after putting on a tune yesterday, I had to run back into the living room and turn the speakers off when I realised I could hear the "humming" noise from the other side of my flat.
A friend suggested that it's a problem with either the power supply or the sub. Has anyone else encountered this problem? Does anyone have any suggestions?
Oh, one other thing - I'm based in the UK, and the speakers arrived with a Euro plug. Komplett provided an adaptor - just a simple plug head convertor. Is this an issue?
Thanks in advance for your time!
James
Oh - one other thing. Adjusting the bass level at the back of the speaker does have an effect on the volume of the humming. Oddly, though, the level of noise is reduced at the highest setting, and is utterly intolerable at the lowest.
Message Edited by _yossarian_ on 06-20-2005 02:42 PM

Yes, they specifically fix Nvidia 330m problem, they state that the only true solution is to remove old chipset with their brand new chipset that has been apparently released by Nvidia as an update for this issue, this is exactly what they say:
What faults can we fix?
We can fix graphic/display issues relating to the 15" / 17" Nvidia 330M models in 2010 Models. These are fixed using the appropriate professional equipment.
Brand New Chipset Repair - (only option we recommend for Macbook Pro Nvidia Models) With this procedure we re-fit a Brand New Nvidia GPU Chipset reballed in leaded solder.
**** Special Offer - £10 off making the Brand New Chipset Repair £169 + Post! ****
They also provide photos of certain logic board (including photo of serial number) with old chip, chip removed and new chip installed as a proff.
Thanks!

2.1 with my 5.1 SBS 560... i know that this has been anwered before

Hi guys!
Well, i know that this has been answered before I post this, but I'm Spanish and I don't understand all the answers...
I have recently purchased this 5.1 SBS 560, and I only hear the left and right frontal speakers, and the subwoofer. I have read and re-read all those posts about this problem, but I don't understand well, and overmore i'm not good with the sound problems...
By the way, i have a Creative SB Live! Value. It is a 5.1 card, isn't it's
Please, explain me how to hear all the speakers. Explain it as if you were explaining it to a dumb ^^
Thanks everyone
Bye!
Message Edited by Fernandisco on 06-02-2005 09:29 PM

ok, thanks again to all of you
I have a SB Live! Valor (in spanish, i suppose that it will be value in english). I know it, and i have checked it in the properties of My PC.
well, i'll bought an audigy 2, then, but i don't have money... :P so i will use this card for some more time
but i have a question, ok, it's only for 4.1, but i only hear still 2 speakers and the subwoofer. Can I use at least 4 spekars, until I buy a new sound card?
I have enabled the CMSS in the creative playcenter, but it seems still to be working only the left and right frontals and the subwoofer
Sorry for my english again... and thanks a lot! ^^
PD: i will post the numbers printed on the card later, sorry but i can't open the PC now

OT: Monitor/Speaker Stands

Hi guys,
I am really sorry for the OT but I am not sure who to turn to . I am looking into buying stands for my monitors and was wondering if anybody came across anything that might fit my requirements while surfing the net and would care to share links -- my current ones are soo unstable my heart is skipping a beat every time somebody passes by them with my monitors on them . Price is really irrelevant; what I am looking for is 35-36', metal, preferably four post but other configs are also welcome as long as they are stable, fillable is also prefered. They should be able to supoprt ~19kg/40lbs(for a pair of Dynaudio BM15A's), they will be on a thick carpet so spiking is a plus but not a must since the floor under the carpet is abrand new hardwood and will probably add coasters underneath :-| ... The main thing is stability. My current ones are 36' Bello's and at that weight/height they are no good (they were awesome with the Event 20/20bas).
Thank you very much in advance for all your help! I really appreciate it.
P.S. Just aquick note -- sound anchors are ...uu...well... awesome but ~$800 quote (before shipping) ... still debating... hence my current search for other options.
PPC G5 Dual2ghz Mac OS X (10.4.8) Logic Pro 7.2, MetricHalo ULN-2, Dynaudio BM15A
PPC G5 Dual2ghz Mac OS X (10.4.8) Logic Pro 7.2, MetricHalo ULN-2, Dynaudio BM15A

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Speaker Stands MT-1100

I have these stands for my Inspire 5.1 Digital 5700 speakers and inavertility, knocked one of the stands over and it broke/snaped the plastic bit that slots onto the top of the metal pole and slots onto the rear satlite. The speaker still works. I have tried emailing and phoning Creative each time and no response!!! What can I do? Cheers Darren

No response is unusual. Were you using the website to contact them? Did you get the automated email reply (if i recall correctly you should do). I wonder if this is the same one as was included in your speakers? It says it is the adapter included, but doesnt list your speakers. My guess would be it is what you need, but hopefully someone will confirm this before you buy.

Need recommendations on a speaker stand

Alright, so I've had the unit for about a month now. In some ways, I'm totally delighted with it. There are certain songs where this thing just sings. Anyone who wants to know how perfect this things sounds when it's at its best should give a spin to Another One Bites The Dust by Queen.
On the other hand, if I had to choose, I guess I'm one of those rare individuals who'd prefer a more highly detailed treble to the (admittedly quite clean) thump of the Hi-Fi. Since the EQ settings on the iPod suck from that perspective, the best way to get adequate treble performance is to connect another device which gives greater EQ control.
That being said, I'll be damned if I don't cash in on the "ecology" of it all and use this thing with my iPod. Which means it comes down to placement. In particular, I'm hoping someone out there can recommend a speaker stand suitable to a person with my predilections.
I'm thinking something tall, but solid and sturdy, and something that stands alone, directly on the floor. But I'm not an "audiophile" (or whatever), so I don't know technically what it is that I'm asking for,
Maybe one of you out there does.
Give a shout if you can help. Thanks in advance..
Windows XP

Hi,
There are plenty of speaker stands offering in the market, my suggestions are:-
1. As normally, audiophile speaker stands are in pair, so it is not easy to buy just one, unless you manage to get one, otherwise, see whether you will find a stand for turntable, but which may be quite expensive.
2. I suggest that you go to the furniture shop instead, most of the stands there are made in Wood, which is a good material of iPod HiFi then "Metal", wooden stand makes the song (from digital music files) sound a bit "warmer".
3. The stand must be heavy and solid (but with no wheels)
4. Buy 3 pieces of cones (again I prefer wood then metal), put them between the surface of the stand and iPod HiFi, make sure with the spike direction points to the surface of the stand.
Just in case you do not understand of what speaker cones are
http://www.uhfmag.com/MiscAccessories.html

Ergonomic Laptop Stands for MBP 17

I'm looking for a good ergonomic laptop stand for the MBP 17. The main features I'm looking for:
- has to be comfortable while sitting on a couch or in bed
- has to effectively help in cooling
I've looked at the iLap, but I'm not too convinced that it effectively cools the machine. Sure, it's aluminum but its flat and that little hole in the middle I feel is more for show than function.
Can anyone help?
Thanks to all in advance.

Congratulations on deciding to use a laptop tray or stand for using your notebook in bed or on a couch. Even the least ergonomic ones will leave an air space beneath the computer (important for cooling) and will protect you from the heat of the case bottom.
I've used or tested a variety of trays or stands over the years.
For my 15" MPB I've bought a KoolSink aluminum tilt stand. It's a very simple and quite effective design. It protects the finish of my desks and keeps the MBP's case cooler during operation. I like the tilt angle for typing. It works reasonably well for laptop use. And it's convenient for travel, as the MBP will fit inside it and the two together fit into my laptop bag (I slip a sheet of paper between them, to protect the finish of the MBP).
The price, especially combined with a high shipping cost, may seem high for what is really no more than a well-conceived and formed sheet of aluminum. But it is effective.
I also like the iLap. I think the KoolSink is a bit more effective in cooling while the notebook is in desktop use, and the KoolSink is more compact for travel use.
But if I planned to make more use of the MBP in my lap than I normally do, I would have chosen the iLap.
Both the KoolSink and the iLap assist cooling by providing more metal heatsink to absorb and dissipate heat by convection to the air. Both do a good job of leaving air space under the notebook and protecting the user while in laptop use.
I don't see any advantage to using trays with little built-in fans that draw current from the computers battery. Many of them are made of plastic (no heatsink/convection transfer value to speak of) and some are shoddily made.

Training and Event Management (PE) - What does PE stand for?

Hi
Re: Training and Event Management (PE)
Can someone tell me what (PE) stands for?
I have had a look at the documentation on SAP Help but cannot see what this stands for.
I want to use this in the naming convention in my role stategy but need to understand what this means.
Does anyone know?
Thanks
Charnaine

Hmmm... the plot thickens...
Perhaps if we look into the context where this abbreviation is used, then it would give a hint.
For example:
"training evidence in PE" => Personnel Education
"attendance recorded in PE" => Personnel Events
"will result in PE" => Personnel Execution
According to [PE-RPL|http://help.sap.com/erp2005_ehp_04/helpdata/EN/77/bff8ab4a2911d182b80000e829fbfe/frameset.htm] it is a bit of a mix of the first two.
Cheers,
Julius

Speaker stands for SBS 560

Similar Messages

Maybe you are looking for