Speaker Stands MT-1100

I have these stands for my Inspire 5.1 Digital 5700 speakers and inavertility, knocked one of the stands over and it broke/snaped the plastic bit that slots onto the top of the metal pole and slots onto the rear satlite. The speaker still works. I have tried emailing and phoning Creative each time and no response!!! What can I do? Cheers Darren

No response is unusual. Were you using the website to contact them? Did you get the automated email reply (if i recall correctly you should do). I wonder if this is the same one as was included in your speakers? It says it is the adapter included, but doesnt list your speakers. My guess would be it is what you need, but hopefully someone will confirm this before you buy.

Similar Messages

Availability of Speaker Stand in India

Can anyone tell me if rear-speaker stand for Inspire 5200 5.1 system is available in India? I have searched a lot of place, no one has been able to help me. I think the model number would be MT1200 or MT1100. It would be great if you could tell me a website from where I can buy it online. Thanks.

I also require MT 1500 stands for megaworks thx 550.No one is able to help me in Pakistan. I also went to the creative distributors in Islamabad but they also cut a sorry figure.

Speaker stands for SBS 560

Does anyone know where I can find speaker stands compatible with the SBS 560?
Thanks in advance!

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Speaker Stands for I-trigue 5600

hey
I just bought I-trigue 5600 system and i was intending to get back speaker stands so that i can have them positioned properly.
Creative sight is not giving me any accessories for I-Trigue 5600 does any one know what are the stand style number of part number and where can i get those from in Australia
Any help will be appreciated
regards

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

Speaker stands for ProGamer G500

Does anybody know speaker stands that are compitable with the Creative Gigaworks ProGamer G500?

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Still have 6 inspire mt1200 speaker stand adaptors available for trade

I have the 750 Gigaworks Speakers and now have a total of six Creative MT-1200 speaker stands. Only needed four until I broke one of the adapters, so I had to buy two more stands. (You can't buy the adapters separately here in the US)? If anyone out there isn't using the Megaworks/Gigaworks adapters from the stand kit, I would be happy to trade for the other Creative Inspire adapters that came along with my sets of speaker stands. Let me know if anyone has the adapters I need. They are so flimsy it seems so silly and extremely expensive to have to pay $70 plus shipping, just to replace two small adapters. Hope Creative will fix this little problem in the future. luvmyrescuedogsTucson,AZUSAThe 6 plastic adaptors that I still have available, fit the Inspire Speakers. They are the plastic ones that are horizontal and have one hole in them. The other long vertical Inspire Adaptors have already been traded to a forum member from The Netherlands.
I believe he said his Creative speakers were the Inspire 5700sAnyway, if anyone has the ones for my S750 Gigaworks, that I can trade for, please let me know.

First, let me thank the two Creative forum members who were able to trade their extra speaker stand plastic adapters to me for the extras ones that I have. It is very much appreciated. Now, if there is a forum moderator reading this message, then would it be possible to pass along my frustrations on being unable to order these very essential parts from Creative here in the US? Surely, I can't be the only person who's metal speaker stand has fallen over and broken that little plastic adapter. These stands are very prone to tipping over. If nothing else, why not make that adapter out of metal? When ordering our stands, why not let us just buy the adapters that fit our particular speaker, instead of giving us extras for two other models? These speaker stands are very overpriced and it seems wasteful to have to junk them because of the weakness of a little plastic part or to have to buy extra stands just to get the part needed. luvmyrescuedogs

OT: Monitor/Speaker Stands

Hi guys,
I am really sorry for the OT but I am not sure who to turn to . I am looking into buying stands for my monitors and was wondering if anybody came across anything that might fit my requirements while surfing the net and would care to share links -- my current ones are soo unstable my heart is skipping a beat every time somebody passes by them with my monitors on them . Price is really irrelevant; what I am looking for is 35-36', metal, preferably four post but other configs are also welcome as long as they are stable, fillable is also prefered. They should be able to supoprt ~19kg/40lbs(for a pair of Dynaudio BM15A's), they will be on a thick carpet so spiking is a plus but not a must since the floor under the carpet is abrand new hardwood and will probably add coasters underneath :-| ... The main thing is stability. My current ones are 36' Bello's and at that weight/height they are no good (they were awesome with the Event 20/20bas).
Thank you very much in advance for all your help! I really appreciate it.
P.S. Just aquick note -- sound anchors are ...uu...well... awesome but ~$800 quote (before shipping) ... still debating... hence my current search for other options.
PPC G5 Dual2ghz Mac OS X (10.4.8) Logic Pro 7.2, MetricHalo ULN-2, Dynaudio BM15A
PPC G5 Dual2ghz Mac OS X (10.4.8) Logic Pro 7.2, MetricHalo ULN-2, Dynaudio BM15A

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Where to buy Speaker Stands for my Creative Inspire T7900 System in Germany?

Hi,
I'm trying to buy the MT-1200 Speaker Stands here in Germany. Any help where I could get them (even outside Germany) would be appreciated.
Thanks!
htg

Here is what will work using your existing 4-3 cable and an extra 3.5mm cable. First unplug all the cables from the back of your card and your woofer. Then plug your new 3.5 cable (make sure you are using a stereo cable and not a mono one) into the black on the back of your card and the black (rear speakers) on the back of your woofer. Then reverse your 4-3 cable that came with your speakers. Take the 4 side of the plug and use that end on your card instead of the speaker side. With the 4 plugs hook the green plug to green on the card, orange plug to orange on the card and black plug to grey on the card. You do not need to use the grey plug, so just let it hang there or whatever. On the end with the three plugs, on the back of your woofer hook the green plug to green (front speakers), orange plug to orange (center and subwoofer) and the black plug to black (side speakers.) This is the only way that it would work for me. Simply unhooking the grey on the subwoofer and running an extra cable from there to the grey on the back of the card did not work for me. It has to do with the way Creative has the 4-3 plug wired and it combines rear and side speakers. You will notice this if you look at the colored plugs and compare the number of rings on the male plugs; some have two and some have three for the different channels. When I simply run an extra wire from grey to grey it still cuts out half my speakers. The above way I outlined works awesome and gives me true 7.1 sound. Good luck!

Creative MT-1200 Speaker Stands for T7900 (UK)

I have eventually got my T7900 kit but i have found that i need stands for the rear speakers. It advertises them all over the box as the MT-1200 model. When i checked the Creative Shop (UK) it states that they are not in stock (37.8 inc vat). I cannot find them anywhere else for the UK (Amazon, Ebay etc). Anybody got any ideas as to where i could get a pair of speaker stands?cheers Steve

Of course about long ones. http://www.creative.com/products/pro...30&product=955

Need recommendations on a speaker stand

Alright, so I've had the unit for about a month now. In some ways, I'm totally delighted with it. There are certain songs where this thing just sings. Anyone who wants to know how perfect this things sounds when it's at its best should give a spin to Another One Bites The Dust by Queen.
On the other hand, if I had to choose, I guess I'm one of those rare individuals who'd prefer a more highly detailed treble to the (admittedly quite clean) thump of the Hi-Fi. Since the EQ settings on the iPod suck from that perspective, the best way to get adequate treble performance is to connect another device which gives greater EQ control.
That being said, I'll be damned if I don't cash in on the "ecology" of it all and use this thing with my iPod. Which means it comes down to placement. In particular, I'm hoping someone out there can recommend a speaker stand suitable to a person with my predilections.
I'm thinking something tall, but solid and sturdy, and something that stands alone, directly on the floor. But I'm not an "audiophile" (or whatever), so I don't know technically what it is that I'm asking for,
Maybe one of you out there does.
Give a shout if you can help. Thanks in advance..
Windows XP

Hi,
There are plenty of speaker stands offering in the market, my suggestions are:-
1. As normally, audiophile speaker stands are in pair, so it is not easy to buy just one, unless you manage to get one, otherwise, see whether you will find a stand for turntable, but which may be quite expensive.
2. I suggest that you go to the furniture shop instead, most of the stands there are made in Wood, which is a good material of iPod HiFi then "Metal", wooden stand makes the song (from digital music files) sound a bit "warmer".
3. The stand must be heavy and solid (but with no wheels)
4. Buy 3 pieces of cones (again I prefer wood then metal), put them between the surface of the stand and iPod HiFi, make sure with the spike direction points to the surface of the stand.
Just in case you do not understand of what speaker cones are
http://www.uhfmag.com/MiscAccessories.html

N8 Loud Speaker, Stand Needed.

One of the only issues I have at the moment is that when the handset is laying on its back (how rude! lol) on a bed and other soft furnishings, like the sofa or sofa arm, the loudness of the speaker phone and ringing is reduced quite a lot due to the fact the only speaker is the one on the back.
One of the cases I bought for it makes it even worse due to it making the level of the back of the phone level with the speak and camera bit that sticks out. Making the sound of the ringer very low when even on a flat/hard surface.
I think I will have to have a couple of stands/chargers for the phone to be in so I can hear it ringing.
http://www.mobilefun.co.uk/elegant-cradle-for-nokia-n8-black-p25765.htm
Does anyone know of a desktop charger or ideal stands, I'm also looking into a car holder for using the sat nav feature. But they have got to be wide enough for the case on the handset as well, so as for the car holder I think the official Nokia one wouldn't work very well.

@iseebird
Thanks for that, I've just ordered the CR-115 for the car.
Hopefully as it expands the phone will fit with the cover/case still on, only adds a couple of mm's to each side, so should do.
I'm not keen on that one Nokia have as an accessory for the N8 "CR-122", just looks big enough to get the bare handset in, also looks quite rough with no rubber or foam protection.

S750 Speaker cable

Hi All
Does anybody know where to purchase the cables that run from the sub to the satellites as I require replacement cables for my S750 system?
I have tried maplin but with no success.
Also do creative still sell the speaker stands for the S750's? thay are not on there website.
Would creative be interested in selling these products directly to me?
Thanks

Matt,
The cable the original poster is referring to is from the sub to the satellites, not the 4:4 cable. Contact Customer Support if you need that cable to see if they can supply you with one.
As far as the colours go, I'm not sure what you mean, putting them into the jack? Or do you mean you need to know which colours (on the sub) are for which input? The manual should cover that, if you need other information please be more specific as to what exactly you need.
Cat

G5 10.5.8 Combo Update codec overrun - install fails

Hi,
I still have my first mac, a Power Mac G5, but it has been acting as a center speaker stand for some time now. A couple of years ago it started playing up, I spent hours and pounds trying to fix it, gave up and bought a shiny new iMac. So with the festive season upon us and orders to tidy up, I thought I'd have one last try at fixing it before turning it into a drinks cabinet.
As I recall, it all started to go wrong one day when I tried to download a large update to something. When I tried to install the update I got a Codec Overrun error and/or a Corrupt File message. As it stands today the machine is running a clean install of OSX 10.5.6 and I am failing to install the MacOSXUpdCombo10.5.8.dmg upgrade. I currently have 2 copies of the update.
One copy on the desktop was downloaded directly from the Apple support site. The .dmg opens and verifies OK and I can launch the MacOSXUpdCombo10.5.8.pkg. This runs through the installation sequence, past the password but finally comes up with an error message "Install Failed. The installer could not validate the contents of the 'MacOSXUpdCombo10.5.8' package. Contact the software manufacturer for assistance."
Another copy in my downloads folder, put there by the Software Updater, doesn't get that far. It comes up with "Warning,The following disk image failed to mount. Image - MacOSXUpdCombo10.5.8.dmg, Reason - codec overrun."
So far I have tried:-
Memory - run third party memory checker application (can't remember which one) and found no faults.Tried different set of memory cards
Hard disk - run all the disk check and repair utilities, re-formatted, repartitioned. Tried a different hard disk.
OSX 10.5.6 - reinstalled from original disks several times.
MacOSXUpdCombo10.5.8 - downloaded via Software Updater process and direct from Apple Support website. Downloaded via wi-fi, ethernet, different Mac, different PC. Always get the exact same file size.
Resetting the PRAM etc
New standby battery
Installing in Safe Mode
Swearing.
None of this has worked. I get some different error messages but they are all variations of "codec overrun", "corrupt file" or "Install failure"
Anyone got any other ideas? Or should I just get on with the drinks cabinet conversion?
Thanks

That message isn't a space available message. If you bring up Disk Utility, how does it say the partition is formatted, ie, partition format, write status, and partition map scheme? Assume SMART status is verified, yes?

"text wrap image" in Keynote 5.0.3

I used the subject line (without quotations) to search for an answer in both Keynote and Pages forums, but found nothing relevant.
Surely I can place an image into Keynote 09 and be able to wrap/ flow the text around it. Hadn't I done this in the past? I'm not able to find it today- looked in the inspectors (there is no "wrap" inspector tab, all the menus, read the user guide (it doesn't even have the word wrap in it), and it's looking like I can't wrap/ flow text around an image.
I have to admit I'm surprised by that.
Any help would be greatly appreciated, especially if you tell me it can be done and how to do it. ::grin::
Thanks. Joel.

Sorry to go off-topic, but I just wanted to explain why the “if you have to wrap, it’s too much text” is a good rule, but like most rules, there are many instances where that rule can +and should+ be broken.
Most of the presentations I make are to public boards (public utility governing boards, county boards of supervisors, regulatory agency boards, etc.). Before the meeting, I submit my Keynote presentation, which is included in the agenda and ultimately becomes part of the permanent public record.
I could make a fabulous speech with an amazing, very simple Keynote presentation that supports my speech, but the decisions typically don't get made in the meetings. They get made based on the recommendations of staff members who use my Keynote presentation as a reference because they weren't at the meeting to hear my riveting speech.
In these cases, the Keynote presentation isn't a visual aid for my speech. The speech is an audio aid for the Keynote presentation. Succinct and well-written text organized logically with easy-to-understand graphics wins staff over to my position. Three words and a graphic on a slide that don't make sense without the accompanying speech accomplish nothing.
Anyway, *as you said*, there are exceptions to every rule and your point is a good one. I see all too often presentations where the speaker stands in front of the group and just reads his PowerPoint presentation word for word (the people who do this are inevitably using PP, not Keynote, of course )
The most important thing is to consider the purpose of your presentation, whom it will be presented to, and how it will be used. Anyone who is doing presentations professionally should understand this rule (and others), and the reason behind it. And at that point, you can make an informed decision about whether or not the rule is appropriate to your specific situation.

Bill Of Material In Sales Order

Hi SD Experts,
My scenario is this
" When i enter a particular material ( say Home theatre system model number ) in the sales order, the BOM should be exploded and its package contents like connecting wire of 5 mts * 2 quantity , Speaker stands and its quantity depends on the Music system like that it should be displayed in the sales order..
And also i want to know the configuration of BOM (Material and its accompanying material in the order) for sales order like these type.
Pl's suggest me how to proceed.
regards ,
James
Valuable answers will be rewarded...

Hi James,
As you rightly mentioned, the purpose of a BOM is to contain a list of materials. To create
a sales BOM. use T.code CS01.
Here you give the usage as 5 - indicates sales and distribution as there can be production boms also with a different usage.
After you enter inside give the components that make up your main material, say music system containing
Itemcat          material               Qty
l               2 mt wires                2
l               speaker                   2
so on, then save it.
For each of these you should have a material master created. For the main item ie., music system select the item category group as " ERLA " for header level pricing and
" LUMF " for item level pricing.
Maintain item category determinations in VOV4 as
<b>For item category group ERLA</b>
OR + ERLA                         -
> TAQ ( Header level pricing )
OR + Norm +     + TAQ (higher level item cat ) -
> TAE
<b>For item category group LUMF</b>
OR + LUMF                         -
> TAP ( Item level pricing )
OR + Norm +     + TAP (higher level item cat ) -
> TAN
This will setup the scenario you wanted. Now when enter music system in sales order with " 1 " quantity it will explode as
2 wires
2 speaker
as was the component quantity mentioned in CS01.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Speaker Stands MT-1100

Similar Messages

Maybe you are looking for