Speakerphone audio issues after iOS7 upgrade

Is anyone else having speakerphone issues after upgrading to iOS7?  I have a iP4 and when  used normally, transmit audio is normal.  When switching to speakerphone, transmit audio in non-existent and person on other end cannot hear me.  Thoughts?

I also have a Mac Air 2012, tried charging from Mac Air and it's now charging! Mac Air is now charging from the same wall unit location which I used for iPad 2 - so nothing wrong with the wall unit. 
I just wish i could charge as fast from wall unit as with iOS 6.  Any further guidance is greatly appreciated.

Similar Messages

  • IPad2 charging issues after iOS7 upgrade

    I recently upgraded iOS7 in my iPad 2, after the upgrade I find that the charging time has increased greatly!  Not sure if this was due to using the iPad while charging. Yesterday left iPad2 for charging all through the night and more (12-14 hrs) only to find this has charged only 3%. The charging issues seems to have degraded over time. I had atleast charged fully (100%) once after iOS7 upgrade-which also took a lot time than iOS6.
    All the charging I did was over wall Unit, with original chargers. I see from forums that this seems to be experienced by few more users. Anyone found any solution to this problem?
    I have tried resetting, switching off the iPad 2 while charging with no success. I'm now regretting having upgraded to iOS7- which I liked. This is not what I expected from Apple.

    I also have a Mac Air 2012, tried charging from Mac Air and it's now charging! Mac Air is now charging from the same wall unit location which I used for iPad 2 - so nothing wrong with the wall unit. 
    I just wish i could charge as fast from wall unit as with iOS 6.  Any further guidance is greatly appreciated.

  • Disabled ipad  and password issues after ios7 upgrade

    I upgraded my iPad mini and all seemed well so I upgraded my iPhone 4s and my iTouch 5.
    It asked me for a Passpwrd to restore and I never used a password for my backups or on my iPhone.  I tried 0000 and 1234 as well as every PW combo I ever used--nada.  I finally had to set the phone up as a new device.
    Later I tried to access my iPad Mini and when I put in the PW I just set, it refused it and finally disabled the iPad.  I had to go into restore and when I did the backup file would not accept my PW.
    This is a nightmare.  I lost valuable info not to mention the amount of time to rearrange my iPhone and iPad.  I  habe my backup but cannot access it because it will not accpet the PW
    The really stupid thing is that trying too many PWs disabled the iPad and I suppose that is to make it a brick if you steal it but I was able to force a restore  by shutting down and  holding down the home button when I plugged it in so if I had stolen it it would not make any sense at all

    I was experiencing the same thing.  This article worked for me, hopefully it will help you.
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    Hold both the home button and the wake/suspend button down at the same time. You should see the Apple logo appear on your screen after holding these buttons down a couple of seconds, which means your iPad is booting up and should be good to go in a few more seconds.

  • After ios7 upgrade the audio is horrible, what can i do?

    After ios7 upgrade the audio sounds are terrible, what to do?

    Try going into the settings and 'reset all settings'
    you will need to retweak your device but it's helped some with their sound issues.

  • Audio issues after upgrading to OS X 10.10 (Yosemite)

    Hello,
    I have been facing audio issues after upgrading to OS X 10.10
    - No sound in VLC
    - Re-booting with Option-Command-P-R did not work
    - System sounds are fine
    - Quicktime Player works just fine
    I tried:
    - Plugging in earphones while video was playing on VLC
    - F10/F11/F12 while video was playing on VLC
    - Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
    - Played something in Garage Band (found on a thread elsewhere) and restarted VLC
    None of the above solved the issue
    Any one else facing similar issue with VLC on 10.10?
    How did you manage to fix this?
    I am running VLC 2.1.5 btw.
    Thanks in advance!

    Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
    Youtube, QuickTime, all play with no sound at all.

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Ipad2 crashes multiple times a day after ios7 upgrade.

    Ipad2 crashes multiple times a day after ios7 upgrade. This does not seem to be an app specific problem and has happened with Safari, other browsers, games, books, etc. The screen freezes and then the app closes to the reveal the desktop. I use the ipad exclusively in landscape. I have purged memory several times and tried re installation. I never had a problem with the device prior to the upgrade. Any suggestions or solutions? Many thanks.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If the issue persists...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT201270 ITunes not Showing iPad and iPhone after IOS7 upgrade.

    ITunes not Showing iPad and iPhone after IOS7 upgrade. I have reinstalled iTuned. Repaired services...etc

    Hey Sliqueg,
    There are a few troubleshooting articles that can help resolve the issue. Check them out here:
    For Windows:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    For Mac OS X:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Sincerely,
    Delgadoh

  • After ios7 upgrade, I cannot select different ringtone for different phone #

    I had set up different ringtones for specific phone numbers but after ios7 upgrade, all the phone numbers ring with the default ringtone. The ringtones are still individually assigned correctly when I look in the addresses book. I have even tried changing an assigned ring tone to something else & heard the new ring tone when it was selected, but when the number was called, I just got the default ringtone.
    Any ideas or solutions?

    Hello ccrjon,
    Thank you for providing so much detail about the issue you are experiencing with Messages after upgrading to iOS 7.
    The first thing I recommend is quitting and relaunching the applications on your iPhone:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    You can find the full article here:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you are still seeing the same issue after quitting and relaunching the Messages app, I recommend restarting your phone and then resetting if it's still not working:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have a 2010 Cadillac CTS that no longer works w/my iPhone 4 after iOS7 Upgrade.

    I have a 2010 Cadillac CTS that no longer works w/my iPhone 4 after iOS7 Upgrade.  Any suggestions?  It worked well before the upgrade.

    I'm sorry...my question was imprecise.  When I said 'no longer works' I was referring to plugging the device into the USB and power jacks in the center console and then being able to play music through the radio and control the device from either the radio or the steering wheel buttons.  The iPhone 4 I use for this purpose has no cellular service and has never been paired with the car.  I have an iPhone 5 with cellular service that is paired with the car.  I cannot test theiPhone 5 with the car because of the difference of connectors on the phone.   :-(  The iPhone 4, however, works fine in my wife's Hyundai Santa Fe.
    Thanks, in advance!

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • TS4208 Apple Mail client no longer marks my mail as read on all my iOS devices. If I read a email on my iPhone and later open Mail on my iPad, the iPad still shows the email as unread.This changed recently, perhaps after iOS7 upgrade. Did I miss a setting

    Apple Mail client no longer marks my mail as read on all my iOS devices. If I read a email on my iPhone and later open Mail on my iPad, the iPad still shows the email as unread.This changed recently, perhaps after iOS7 upgrade. Did I miss a setting? All mail account are IMA. iCloud is set to push, business mail is set to fetch every 15 minutes.

    Read thier own support document on the subject then
    http://support.apple.com/kb/TS1795
    This document was written as an answer to all those who complained about it as paying MobileMe users
    They ignored us then and when MobileMe became iCloud they ignored us again, and just carried on with a system that will not update the e-mail read status across all devices
    That's how it works,   and like you 1000's of loyal Apple users cant believe it either but there you go

  • After iOS7 upgrade, iTunes only gives blank screens.  And Netflix won't load.  Any idea on what to do?

    After iOS7 upgrade, iTunes only gives blank screens.  And Netflix won't load.  Any idea on what to do?

    Yep. I did some more poking around and found that one. Downloaded it and tried to run it and got more errors. Did some more searching and found a fix for the installer on Vista. Ran the fix and tried the ipod software again. It got further, but then hung up again. I'm still trying to figure this all out. Anyone got any answers it'd be much appreciated.

  • Why does my ipad have old wallpaper after ios7 upgrade?

    why does my ipad have old wallpaper after ios7 upgrade?

    Hello there, SunnyGirlLori.
    The steps found in the following Knowledge Base article provide some great troubleshooting:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for