Speakers for the iPod running on batt, do they cut battery use in half?
I know that volume has a lot to do with battery drain on a battery radio, and I imagine it is the same with the iPod. How much drain do speakers (the kind specifically made for the iPod) cause? Do they cut the battery useful time down to 2 hours? 1 hour? before needing to be re-charged?
I'm interested, but not if they are a huge drain on battery life. How do they compare with drain caused by ear buds?
Let's say all of this would be at a moderate volume, not loud.
Thanks for any input on this,
Ken
No one can give you a definite answer on this. Every speaker uses electricity at a different level so the only way to know is to call the manufacturer and test them out yourself. I can say that it will drain a lot of your iPod's batteries if it uses your iPods batteries in the first place. Usually speakers have a power source of its own so you can plug the speaker's adaptor to a outlet on the wall.
Similar Messages
-
If i have a shattered ipod touch 4th ggeneration and i trade it in at Apple Store for the ipod touch 5th generation Will they take it even though it is shattered? and will i get my 10% recycling thing?
As far as recycling, they will take one, dead or alive, so I assume a shattered one would qualify just as well.
-
Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint. -
for the iPod shuffle does it have in built speakers or do u have to have earphones to listen to music?
Yes. The iPod Classic does not have a built in external speaker. On the 5G Nano and iOS Devices have built in external speakers.
B-rock -
Settings NOT saved for the iPod, because- not found
I've a lot of regular changes to make when updating my music library on my iPod. But when I'm in the middle of doing so - that is using TAB "Music" (which "Sync Music" enabled) - and checking all relevant playlists, an error appears:
"The settings were not saved for the iPod “<my iPod name>” because it could not be found."
I don't know what to do because the only related articles all dates back to… 2007! That's 5 years ago!!!
Of course I tried all the solutions of 2007, and when I do other errors occur like:
"iPod sync failed" OR… my iPod simple disappears from the list (and even DEVICES doesn't shows up anymore in the left pane).
THANKS for helping me.Can you post a link to the article you are referring to?
I assume you have tried using a nother USB sync cable to help rule out the possibility of a faulty one? What about plugging the iPod into a different USB port on your Mac?
It might help to remove any other USB devices you have connected to the Mac. Then reboot the Mac as well as your iPod by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. Then try to resync.
Could you provide the full text from the error messages you are referring to?
Make sure you are running the latest version of iTunes (10.6.3).
B-rock -
Visualizers For The iPod. (Not for iTunes)
We all know the many different visualizers for the iTunes, but are there any visualizers for the iPod itself?
I've got the 5th Gen 30GB Video by the way.
Can you tell me what site I can get them at, if such visualizers exists!
Like how u download mp3 player software for your cell phone, its like that i wanna do with my iPod.
THANK YOU EVRY1 In advance!!Well it might not be an issue NOW, but certainly when the battery goes asplode your gonna have to run on over to the apple store(and they tend to be very snobby with unhappy customers) and then when u ask to get it fixed, they'll say fine, we'll have it done by tommroow, and then they'll chuck it in this little basket for the poor guy in the back who is already swamped tp fx it. Then you gona have to run over again and fetch your iPod. And all that just aint neccassary.
And if it's in your car, why in the nine blazing hells would you want visualizers?! You need to be paying attention to the road!
And I would imagine, that using such a featurw ould deplete a battery in a little over 2 hours, because it's like watching a movie accept worse:) -
When will ios 7 be available for the ipod
when will ios 7 be available for the ipod
It will not. The 4th generation does not have sufficient RAM to run iOS 7.
-
Why doesn't have iOS 7 actualization for the iPod touch 4th?
Why doesn't have iOS 7 actualization for the iPod touch 4th?
Apple should give some feedback for the iPod touch users.Apple should give some feedback for the iPod touch users.
iOS 7 is available for the 5th generation iPod Touch.
The hardware limitations of the older models prevent them from running iOS7. -
What is the highest firmware for the ipod touch 2nd gen.?
What is the highest firmware for the ipod touch 2nd gen. and where can I download it and place it onto my ipod fast?
iOS 4.2.1 is the latest version you can install and run on your 2G iPod Touch. You can complete the update and installation via iTunes.
iTunes: Backing up, updating, and restoring iOS software
B-rock -
Is there going to be a new update for the ipod 8gb
please do a new update for the ipod i want there to be a ipod that dont only use wifi and can have the same apps as iphone 5c
It is not going to happen. That iPod is not powerful enough to run iOS 7 which the iPhone 5C requires.
Allan -
Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?
Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
B-rock -
AFS ARun: sales order not been selected for the allocation run.
Hi,
I am setting up the Purchase-to-Order (similar to Indiv PO item sales order) Process for SAP AFS.
When doing the Allocation Run (trx J3AT) after Goods receipt of Sales order stock, I get an error that ARun terminated because no requirements were selected. The delivery check report (/AFS/LIEF_CHECK) indicates that the sales order has not been selected for the allocation run.
For this process, I have set-up an Allocation type with
1. Requirement selection that does not exclude MTO/PTO orders
2. Set-up stock selection which includes physical stock type for MTO/PTO orders to the customer special stock MSKA with the segment KALAB.
Can someone suggest what I may have missed?
Regards,
PDHi Pankaj, I have same exact issue. How did you fix this ?
Thanks,
Mahesh -
Waiting for the previously running task to complete issue
I am running the full extract process , and one task SDE_ORA_InventoryProductDimension running for 18 hours and its status is "Waiting for the previously running task to complete"
but all running tasked are completed and left tasks are queued by this task, so what make this issue happen?
I restart the informatica server and the task running now!
but for this task I run before it has ten million records , and it always make the dataware house server's cache full and server down,
so how to handle this problem?
Edited by: Yu Yang on Apr 16, 2013 4:58 AMCheck if /*+ FULL(PER_ALL_PEOPLE_F) */ hint existed in the SDE_ORA_INVENTORYPRODUCTDIMENSION_FULL mapping Source qualifier?.
I suggest you to raise an SR and check with your DBA's if they can do something to improve the Performance.
Mark helpfull if it helps.
Regards,
Veeresh Rayan -
I have an iPhone, and IPad. I just got a iPod. I want to create a new apple ID for the iPod so I can access face time and messages separately. However can I use the same credit card account?
Just do it. You can use the same credit card for multiple accounts.
-
Can i set up an access password for the ipod on my ipad 2?
I purchased an Ipad 2 for my son to use in his therapy for autism. He knows how to use it and knows that we have purchased shows and movies for him to watch in the car. Well now that is all he wants to do. I am wondering if there is a way that I can set up a password to access the ipod. If he cant get into the ipod to see shows and movies he will be fine with just playing the games we have for his therapy. I have looked online and have not had much luck finding an answer to this question. So again can someone please tell me if there is a way to set up an access password for the ipod on the ipad2??????
Have you got Home Sharing set up (http://support.apple.com/kb/HT3819) ? i.e. he may be viewing the content from your computer, not on the actual iPad. If that is the case (which would explain to me him being able to access the videos via the iPod app), then the Restrictions settings that I've already mentioned should also work on that 'remote' content.
Edit : your last reply appeared whilst I was typing/checking this. And no, the Videos/iPod apps can't be passcode protected, you will need to go back into Restrictions and remove the restriction, or if the films are only on your computer and not on the iPad itself you could turn off home sharing on the iPad whilst he's playing the games : Settings > iPod and tap on your account id and/or password on the right under Home Sharing and delete it/ them (re-enter them when you want to re-enable it).
Message was edited by: King_Penguin
Maybe you are looking for
-
how do i add my husbands phone to my itunes with out merging contacts, and calendars, we want to share music and pic's and backup all his numbers and calendars seperately form mine
-
Hi Friends, My client requirement is like this: During Return Delivery (MIGO - M.type:122), system should post Vendor Debit (MIRO) postings also. They don't want to do it in two steps. Any user exist available in MIGO to activate MIRO postings. I
-
Hi there An advert poped up whilst browsing, (think it was one similar to those you hover over and it enlarges) when I went to close it, but it left its pixelated / mashed image on the browser window behind it and left an impression all any other saf
-
Hi All, I have a small question.I am using SunOS 5.9 and gcc 4.0 compiler. Please take a look at the below code When I compile the following program under gcc 4.0 it doesn't give me any compiler error and even the size comes correctly. #include<stdio
-
Displaying record from custom table
I have a custom table ztable (kunnr, vbeln, erdat, erzet, flag). Using these values I would like to display the following Client Number (4) = '1234' Filler (6) = space. Record Type (1) = 'A' Client Number (15) = vrkpa-kunnr Customer Name (30) = adrc-