Speakers poping when onbaord audio hardware initializes and turns off
I noticed the audio hardware stops transmitting a signal after 30 seconds or so. During the startup and shutdown time of the audio hardware I hear a pop in my speakers. Is there a fix for this?
I did recently buy new speakers. The old ones did not do this. Is it possible it is the 1/8" audio cable? I might buy a new/better cable and try it out.
Hi newelement;
If you seriously what any help, you are going to have to provide much more information such as name and model of the speakers and how they are connected to the Mac.
Allan
Similar Messages
-
My iPad 3 bettery life is very poor, and it doesn't chrage when it's plugged in and I'm using it, only when it's plugged in and turned off. I'm beginning to be sorry I bought this iPad and that I should have stuck with the iPad 2.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Cheers, Tom -
My Ipad icloud account has been locked an now i want to delete it but i can't please help me because when u try to delete it it says "Turn Off Find My iPad?" when i press delete acoount and turn off it wants to fill the passwor field but it says that you account has been locked for some security reasons and please help me to delete it.
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.
-
My iphone 4 turns off and on when ever i try to reboot and turn off each and every 5 second?
hi there,
my iphone 4 turns off and on in each and every 5 seconds when ever i try to reboot and turn off. i was just trying to get ridge of this things. so culd u help me plz !!!Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
When I try to open my Yahoo mail in safari, I get a message which states:" In order to use Yahoo mail, please turn Private Browsing off. Please go to Settings>Safari>Private Browsing, and turn off" The problem is, my ipad does not a Private Browsing switchat this location.
With iOS 7 on the iPad, you turn Private Browsing on and off by tapping the URL field. The screen that opens up has your bookmarks on it. In the bottom left corner is a hot button marked 'PRIVATE'. Tap on the word 'PRIVATE' to turn private browsing on or off. Yeah, there aren't any instructions anywhere that I can find to do this, and if you follow Yahoo's instructions, they don't work. This doesn't happen with the previous Apple OS, and you can restore your iPad to the older OS.
-
When trying to use the App Store, I get a message "could not sign in, an unknown error has occurred, any suggestions what is wrong? I reset our Internet and turned off the iPad.
Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again. -
When I updated my iPad it turned off and when i turned it back on it said connect to itunes and now i am conected to the itunes but what do i do
See; http://support.apple.com/kb/HT1808
-
my iphone 4s was updating to like 7.1 or 7.2 and i tried to updating by the iphone but it froze and turned off. and when i tried turning it back on the phone kept going to a screen that said plug it in to your computer i did but it froze at the screen where it says plug it into iTunes. ive tried plugging it in to the computer but the phone turns itself off in the process. my old phone broke so I need to use the 4s
Hi sgray2832,
If you are having an issue with your iPhone becoming unresponsive or turning off unexpectedly, I would suggest that you troubleshoot using the steps in this article -
iOS: Not responding or does not turn on - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!
Contact support by web chat or phone to reset activations.
Mylenium -
I have I-Cloud back up on 2 phones that I no longer have, when I go to delete its says do you want to delete and turn off back. Does that mean turn off back up on the phone I use now or just that phone that I no longer use? Thanks for any advice, Buckspc
Not a big issue : Just delete the old backups and if the backup option turns off o your current device, then just turn it on again.
-
My ipod 4 fell and turned off, when i connect it appears recovery mode.
as i said, my ipod 4 fell and turned off, when i connect to my computer, it appears in recovery mode, itunes detects it and i've tried to restore with no luck, i;ve tried to hold the buttons for 10, 20, 60 seconds with no help, im wondering what can i do to get my ipod work again, i dont really mind losing the data inside, i have my backups. please help, what could this be?
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw. -
MY IPHONE WAS WORKING NORMALLY SUDDENDLY IT TURNED OF AND DOESNT WORK ANY MORE!WHEN I PLUGED IT TO THE CHARGER GIVES THAT ITS IN THE RECOVERY MODE WHEN I REMOVE THE CHARGER IT TURNED OFF DIRECTLY SO WHAT I SHOULD DO PLZ HELP !
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many simply will not read such posts.
Enter & Exit iPhone Recovery Mode -
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
mahtab2 wrote:
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
Hi Gurus, Could you please provide any link or information on the below mentioned scenarios. 1)Agency commisions 2)Sales from warehouses 3)Direct sales. Thanks Hari Challa.
-
with the OS 6.1.3 my Camera is not working the shutter is close out and My WiFi graied out need help Thanks
-
I downloaded Ai and got Adobe Creative Cloud - how do I connect to Ai
I am very very unfamiliar with Photoshop etc. I have Photoshop 12 and having trouble understanding. However, I also have 'Adobe Creative Cloud' which I understand to be able to use many things such as Illustrator. How do I do that?
-
The last couple of days I have been getting script errors on startup - Script: chrome://global/content/bindings/browser.xml:194 , I am also getting shutdown errors when I power down "end program" types including sgtray.exe, hkcmd.exe, directcd.exe, m
-
Out.println with UTF-8 not working ..
Hi , My aim is to see this string on the browser and the encoding must be UTF-8 <%@ page import="java.io.*" %> <%@ page import="java.util.*" %> <%@ page import="java.net.*" %> <% response.setContentType ("text/html;charset=UTF-8"); out.println(" pr��