Speakers were working with Airport, now they don't work...can someone help?
My external speakers were working nicely with Itunes and Airport for the last year and then last week, they do not work with Itunes. I think it has to do with the new itunes update. I have tried rebooting my computer and Airport Extreme with no luck. Can somebody please walk me thru the process to get my computer reconnected with my airport!?
Thank you very much in advance!
Can somebody please walk me thru the process to get my computer reconnected with my airport!?
Sure, here are the basic steps to configure the AirPort Express for iTunes streaming:
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
The other thing to take into consideration, is that the iTunes host must be able to "communicate" to the AX in order to stream to it. Anything that would "block" the path could prevent audio from reaching the speakers. I would also check your computer's firewall settings to make sure iTunes is not being blocked.
Similar Messages
-
Itunes will not recognize either my iphone 5 or my ipad since I have downloaded the new Itunes upgrade on my Windows 8.1 system. I've uninstalled and reinstalled and none of that works. Can someone help with this?
I've uninstalled and reinstalled and none of that works.
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me? My iphone and other macbook connect and work no problem. What steps can I take?
Ok....
Now go to your router's settings. Not sure who makes your router...
Look at wireless part of it and see how many computers are actually hooked up to it.
Delete your computer from it (in your router).
Restart your router.
After your router has restarted, try to connect to it with your MB and see if you can browse the net. -
What's wrong with my device? It does not allow me to make calls with Skype or Viber... Can someone help?
My device is a Blackberry Z30. Skype and Viber just to work fine. I had to travel abroad and turn off data services while traveling outside of the US but the applications worked just fine with Wi-Fi. Suddenly they stopped working to make calls. I can still send text messages, but when I try to do a voice or video call (in the case of skype), it only says "failed call" and when I try to call using Viber I get an error message that says the I can not use the application until I complete my GMS call which is ridiculous because I'm not using the phone other than trying to place my call through Viber. The interesting thing is that when I go the permission page in my security settings everything indicates that its on but is gray out and I do not have access to change any setting. The same in both applications. The rest of the applications are accessible to change settings. I already uninstalled skype and reinstalled it and still the same problem. I'm ready to back up everything and wipe out the device to original settings.
-
mac app is asking me to update an app, but it does says that its with another account that is not mine, can someone help me please?
same issue here with MacTracker 6.2 that I don't have but shw in the Update part, when clicking it asks me to log with [email protected] account first which is not mine
-
I upgraded to iOS 5 on my iphone 3gs now phone service (AT&T) constanly goes in and out and battery does not hold charge. Can someone help me?
It appears to be a bug in iOS5. I have the same problem on the 3Gs and my new 4S.
I eagerly await a patch...... -
Compiled JSPs With Jasper - Now Includes don't work
I am using a template page (index.jsp) that includes other jsp pages to fill the body of the page. Previously, I had my index.jsp page as the root document and the other jsp's in a 'jsp' subfolder. To include the other jsp's, I was using hyperlinks like this:
where 'XXXX' is the name of the jsp page without the '.jsp' extension.
So, in the index.jsp page, I had the following line of code that included the jsp pages:
<%
pageContext.include("/jsp/" + include + ".jsp"); // include is the 'page' request parameter.
%>
This has worked flawlessly up to this point. However, now I want to precompile all JSP pages using Ant and Jasper as this is a distributed app and I don't want to ship jsp pages. I compiled the pages and updated the web.xml file with the new mappings. Now the index.jsp page (servlet) displays but does not include the compiled jsp pages. Will the same link to a jsp page use the servlet mappings in the web.xml file to map to the new servlet?
I also tried the following with the same result:
request.getRequestDispatcher("/jsp/" + include + ".jsp").include(request,response);
Can someone suggest a solution? How can I get the compiled jsp's (servlets) to be included and displayed in the same way they were when used as jsp pages?Well, good news and bad news....
I got the includes to work by changing my index.jsp page to use the following:
<jsp:include page="<%=includePage%>" flush="true"/>
instead of:
pageContext.include("/jsp/" + include + ".jsp");
This seems to work.
However, this has uncovered another issue. Now none of the graphics for the page display. So I am left with a page that has broken images links all over it. Does anyone know how to get around this? All my links follow the format:
<img src="/images/...
so they should resolve to the base directory, then 'images' right? When I look at the properties for each broken image, they have the correct path... does anyone know why they wouldn't display? What do I need to do to allow the servlets to display the images properly like the jsp pages did?
Thanks in advance... -
All of a sudden siri and maps stopped working. They were working fine while I was traveling. Now they only work while I'm at home. How can I fix this?
Hi Gangstag,
Since both apps use Location Services, this may be the issue.
Follow the troubleshooting steps for Siri below:
iOS: Troubleshooting Siri
You can turn Location Services on for Siri by selecting Location Services Settings on the prompt, or by going to Settings > Privacy > Location Services and turning on both Location Services and Siri.
When you first use Siri with another application that uses Location Services, you will need to turn on Location Services for that application. For example, if you create a reminder to call your mom when you get home and Reminders or Siri has not been used before with Location Services, a prompt will appear saying that you will need to turn them on in Location Services Settings.
Hope this helps ...
- Judy -
Ring File Unavailable--Nothing has changed, but now they don't work.
I'm receiving an error message of "Ring File Unavaible". I have ensured it is converted to 8000hz, mono, 8-bit mu law and all of the variables. My Ringlist.xml is good to go. I am accounting for the use of capital letters. The error is not a bad ringlist. The rings worked before, so there is no reason they shouldn't work now. I am restarting the TFTP server everytime I make changes. I deleted everything out of the TFTP File Management and re-uploaded everything in case they were corrupt or anything. I'm at a loss. What else am I missing here?
Hi Matthew,
There are some excellent tips from Jason @ Cisco in this thread;
"After converting the files you will need to upload the files to each CUCM server in your cluster (OS Admin --> TFTP File Managerment --> Upload *directory will be /).
RingList info:
Ringlist.xml is case sensitive
Here is the format for the RingList.xml everything in this file is case sensitive as well.
Analog Synth 1
Analog1.raw
Analog Synth 2
Analog2.raw
Make sure to upload the RingList.xml (OS Admin --> TFTP File Managerment --> Upload *directory will be /) to all servers in the cluster, and to restart the tftp service on all servers after upload."
https://supportforums.cisco.com/message/3171590#3171590
Cheers!
Rob -
My address book on the mac showed duplicate contacts so I started to delete them. I deleted A-C. However, on icloud.com, they were not duplictaed and now all of my A-C contacts are gone. How can I get them back?
I think i did the same thing. I just got a new MacBook Air and when it synced with iCloud I had doubles of all my contacts. Now I'm missing most of my contacts as well.... Someone please help with a solution to this mistake....
-
Can anyone help? Tried installing a beta of itunes. It hasnt worked. 10.5 i think. i now have no itunes. my old itunes is now reading as out of date when i try to go in.
The 10.5 Beta version should only be available to those that have subscribed to the Developer channel, and not to anyone else.
The latest version that is available to all is 10.4.1: iTunes 10.4.1 -
Keynote sharing with more than one person using iworks can someone help
Hi I hope someone can help.
I am trying to share a keynote presentation which I have already shared with a second person.
Every time I try I get the pop up asking me if I want to replace existing presentation, which I don't.
Can I share again? If so how, as I feel really dumb ant the moment!!!!Here is how I initiate a text chat.
(0) Click on one of my buddy names in my Buddy List to highlight it.
(1) ⌘ click on the next buddy I want to add to highlight him, too.
(2) Repeat the ⌘ clicks for all the other buddies I want in the chat.
(3) Click the "A" at the bottom of my buddy list to initiate the multiple-party chat.
Try that, and see if it works for you. If you can make it work for two, it should work for more. -
I can't update my apps - now they don't work at all
I don't really use apps on my blackberry but there are two that I use everyday, these are twitter and whatsapp . I don't know if they need updating but they have just stopped working all together, this has happened before but updating them seems to fix it. Now I can't get on to the app world to do this because is says that it needs wifi but I don't have this. Is there any way that I can get onto the app world just using the mobile Internet because this seems like such a silly idea for the people that don't have wifi!
Solved!
Go to Solution.BlackBerry World does not require a WiFi connection to work.
At Options > Device > Application Management, what version of AppWorld do you have installed?
You can delete it there.
Then, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
Using your BlackBerry browser, go to www.blackberry.com/appworld and download/install again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I am running version 24.4.0 I can send and receive email but when I get an email that has a hyperlink that I click on and go to. But we don't go anywhere, I tried running in the safe mode that that help, tried rebooting that didn't help. I have an earlier version on my laptop that works fine.
https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working
-
Didn't move apps at install - now they don't work
On installation I chose not to move the applications. Couldn't then open them - InDesign is missing Cmaps/system fonts and others need serial numbers (can't find).
Tried a re-install to choose the option of moving the apps but I didn't get given the choice.
Is the problem caused by not moving the apps at installation?
Thanks...
G4 Mac OS X (10.4)3813
Hi Vickyzed,
welcome to Discussions!
The best and 100% troublefree place to keep applications is the Applications folder (or the Utilities folder).
In the case of such applications that are limited by users licenses, well in addition, better have them installed by the User who will use them on a daily basis.
All you have to do now,
with you new system:
- Login as main user/admin and install your applications in the Applications folder.
Perform a genuine installation of these apps: do not just copy them from the external HD. That way, permissions and everything will take the best possible start from the correct boot drive, associated with your system libraries etc.
- Store files on externals
- Use apps from the boot drive's Applications folder
HTH
Axl
Maybe you are looking for
-
XPATH problem in Receiver Determination
Hi Experts, I get stucked in the XPATH expression in the Receriver Determination(RD) : The input xml (default namespace settting) is like this : <?xml version="1.0" encoding="UTF-8" ?> <MT_XML_SENDER xmlns="http://test.com"> <LAST_NAME>Bryant</LAST_N
-
Looking for a VI to calculate phase difference
I am looking a VI that will calculate the Phase difference as a function of time between two sine waves at 20 kHz. I am using LabView7 Express just so we're on the same page.
-
Hello All, Can anyone pls let me know where i can find the document to stop and start all the hyperion services version 11.1.1.3 and 11.1.2.1? Thanks, Ashu Edited by: Ashu on 11-Jan-2013 07:10
-
I'm looking for someone out there that has experience configuring XI to send out cXML Purchase Orders via HTTP created in SRM to Trading Partners and also to receive cXML Invoices via HTTP for these Purchase Orders into XI. My questions are: How do y
-
Issue in creating Rules in Grid R2
I am trying to create my own rules to suite my oganisations requirement in Grid R2. The rules are for agent , host, ASM. Cluster DB, Database etc. I have noticed when I start creating a rule , The oprions to select target type does not include ASM, c