Special Assignment Indicator in IT 0001

Dear,
My client want to have some indicator in Infotype 0001 “Organization Assignment” shows that this employee is working overseas or on special assignment, without changing any of his existing integrated Enterprise or Personnel Structures?
Any idea? To include "new" field in Personnel Structure? Or if there is another standard infotype for this?
thanks
Abdulrahman

Hi Abdul,
You have Work contract in IT0001 under personnel structure.
else go for
External Organizational Assignment
In the following steps you make additional settings for the infotypes External Organizational Assignment (0395) and Attributes of Overseas Assignments (0396):
You name the personnel areas to which you are assigning employees or from which you are receiving them within the framework of an overseas assignment.
You name the personnel subareas to which you are assigning employees or from which you are receiving them within the framework of an overseas assignment.
You enter data relating to the work contracts that these employees had in their previous personnel area/subarea or that they now have in their new personnel area/subarea.
You define the administrator groups and administrators that are responsible for the different aspects of human resources administration in the old or new personnel area/subarea.
You define the types of overseas assignments that you have in your enterprise.
These definitions are only necessary if you are assigning employees to or receiving them from such enterprises that are not already present in your organizational structure
Hope it helps.

Similar Messages

  • Error while using Special GL indicator H for Customer Down Payment

    Dear Friends,
    I have configured the Special GL Indicator H (Security Deposit) for Customer Down Payment received. I also make the necessary settings in OBXY for assignment of Special GL against the reconciliation account.
    When I am doing the Customer Down Payment entry through F-29 using special GL indicator H system giing me the following error message
    Special G/L indicator H is not defined for down payments
    Message no. F5053
    Diagnosis
    The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
    System Response
    The entry is not accepted.
    Procedure
    Enter an allowed special G/L indicator or initiate a change of the default settings
    I also check the configuration again but still systems is giving me the same above error.
    Kinldy give me the solution or way of doing this ASAP because I am working in an implementation Prj.
    Regards,
    Sandeep

    Dear Surya,
    I have made the necessary changes in Special GL Indicator F in their properties I assign target spl GL indicator H but while in spl GL indicator H when I assign target spl GL indicator F system gives me following error
    Delete target special G/L indicator
    Message no. F4137
    Diagnosis
    In the SAP system, you can only use "Target special G/L indicators" with "Down payment/down payment request" when "Noted item" is also selected at the same time. These requirements are not fulfilled in the special G/L indicator "H".
    Procedure
    Delete the specified target special G/L indicator.
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation.
    Thanks,
    Sandeep

  • Creation of New Special GL Indicator for customer long term accounts

    Hi Experts,
    We have a GL account (GL111) created for Long term accounts. this is a reconciliation account for customer. However, we have another GL account (GL222) assigned to our customer group this account is being invoiced for some expenses. Because of this we cannot assing GL111 to customer master data.
    We need to post in the same customer expense and loans. How can we create a new special gl indicator that will allow the posting from GL222 to GL111?
    Any inputs are very much appreciated. Thank you very much.

    Hi,
         Creating Own Special G/L Transactions: Specify  (OBYR-T.CODE)
    -  The account type for which the special G/L indicator is to apply
    -  Posting keys (for outgoing and incoming debit and credit postings)
    -  How it is posted
    - Properties for each special G/L indicator (noted item, relevance for the credit limit check, Warning message for liabilities and target special G/L indicator)
    -  transaction type (bill of exchange, down payment etc.).
    EXP:Go to T.code: OBYR path: Financial Accounting (New)>Accounts Receivable and Accounts Payable>Business Transactions>Down Payment Made>Define Alternative Reconciliation Account for Down Payments click on Define Alternative Reconciliation Account for Down Payments and click on double click on K F Pmt req Down Payment Requests and click on Properties (F8) and tick the Noted items ,Target sp.G/L ind. AIMB1 and save .
    Regards
    Sridhar
    Edited by: sridhar.shetty on Feb 28, 2012 1:21 PM

  • Authorization Check for Special Stock Indicator in IE02

    Dear Gurus,
    Would like to check with you if there is an authorization check for change in Special Stock Indicator in IE02-SerData Tab?
    For example, the User will only be allowed to change the Special Stock Indicator only to "E" - Sales Order.
    Would appreciate your help.
    Thanks.

    Hi,
    This cannot be done by using standard auth object. Standard SAP doesnt support control via this field.
    Take help of your ABAP team and create an customized authorization object "Z_OBJECT" with field SOBKZ and which check these field value in table EQBS. Assign this auth object to role and profile you want.
    Use the user exit IEQM0003 Additional checks before equipment update. Give a logic to check auth object when while using equipment change tcode.

  • Special Stock Indicator (SOBZK) and Inventory Extractors

    I have activated business Business Content for the Inventory Management (0IC_C03) cube with Grouping as In DataFlow Before and Afterwards.  However, the special stock indicator field which is part of the extractor and not hidden does not come across into the Transfer Structure, is there a reason and how can I resolve? Thanks
    I have gone to the DataSource/Trans Struc tab, have seen in the Data Source and am able to transfer across
    Message was edited by: Niten Shah

    Hi
    In the Standard Sytem these are the special Stock Indicators
    E     Orders on hand
    K     Consignment (vendor)
    M     Ret.trans.pkg vendor
    O     Parts prov. vendor
    P     Pipeline material
    Q     Project stock
    V     Ret. pkg w. customer
    W     Consignment (cust.)
    Y     Shipping unit (whse)
    I have not found B - Special Stock indicator.
    You can use Accotunt assignment Category D  - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
    Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
    Thanks & Regards
    Kishore
    Thanks & Regards
    Kishore

  • Special Stock indicator Setting in SD

    Hi all,
    I had created the normal delivery Sales Order. But when i'm trying to make delivery against the Sales Order. It gaves me error, Coz some how the Delivery item have Special Stock indicator set to 'E'.
    from where i can remove this setting.
    Pls note I had Checked the SO Item Category, Schedule line, Account assignment cateogry and the Delivery item Category, but couldnt trace out this Setting.
    If any one knew about it, then let me know.
    Regards,
    S Anand.

    Dear Sheo singh
    Special stock indicator is set only in Item category with regard to SD that is in VOV7
    You can also check in the requirement class details in OVZG
    For this you need to find out what is requirement type maintained in your sales order in VA02 procuremet tab
    In OVZH you need to see what is the requirement class assigned to your  requirement type
    In OVZG for your requirement class details you can see whether any special stock indicator is maintained
    But here also the value flows from what is maintained in VOV7
    Hope this information helps you
    Regards
    Raja

  • Special stock indicator in req type

    Hi all,
    Can anyone tell where is the settings given for the special stock indicator E in Req type KE...
    Regards,
    Joseph.

    Dear Joseph,
    I guess this material must be planned using the planning strategy 20,for which after taking a MRP run,the system proposes a
    planned order of order type KD and account assignment category as with E.
    check the configuration settings for the account assignment category in T.code OPPS for the planning strategy 20.
    and for this planning strategy planned materials the system creates planned order for the order type KD - individual customer
    order.
    Check and revert back.
    Regards
    Mangalraj.S

  • Special stock indicator in production order

    Hi,
    We have a new business scenario from sales department.
    For example, A is a MTO item, it has component B & C. Now there is a sales order for A come in, and system create a production order, but there is no enough stock for B. They want to:
    1, Allocate C to the production order and other production order or sales order can not take it away via V_V2 or MRP run.
    2. Create another seperate purchase order for B and want this purchase order also allocate to this production order.
    3. They do not want to use WIP stock because it is difficult to display WIP stock in SAP you know.
    I trying to use the special stock indicator "E" for components in production order, and I move C to custom stock via 412 E with no issue.
    But when I create a purchase order for B with account assignment "F",  it goes to normal stock in MD04. After I post GR for the purchase order, the quantity goes to production order directly, does not show in MD04 and did not reduce the requirement quantity.
    If I create a purchase order for B with account assignment "E", it gives an error message "Sales document item is not defined for the transaction. I tried to change the requirement type from "KMFA" to "KE" in the sales order for A, and the production order disappeared, it is not accepted.
    How should I define and configure the process?
    Thank you so much.
    Albert

    Hi Albert
    I suggest you to take a look on the setting "individuall/collective" on the tab MRP4 of the material master.
    For both components, you should set the value 1 and system will always plan the components under the sales order special stock.
    BR
    Caetano

  • How to avoid special stock indicator for intercompany sales transitions.

    Hi Friends
    I have an issue Intercompany sales .if I  enter intercompany plant(Delivering plant) in the sales order system is taking special stock indicator and looking for sales order stock.
    If I enter company code plant for sales from unrestricted stock, system is not taking special stock indicator.
    Please advice how to avoid special stock indicator for intercompany sales transitions.
    Thanks in advance.
    SRK

    Ravi,
    Special stock is generally determined by the MRP strategy group in the material master of the plant against which you place your order.  The strateg(ies) contained in the strategy group will determine the SO requirements type, which will in turn determine whether or not the order is 'account assigned' (special stock).  
    It is normal to only have one strategy contained in a strategy group.  However (and I seldom recommend this) SAP will support multiple strategies within one strategy group.  In this case, you could have both MTS and MTO orders against the same plant/material, by manually altering the requirements type in the sales order.  This scenario is usually difficult for a planner, and involves additional manual attention to make everything work.
    I suggest that your first avenue is to change the Strategy group in the material master of the delivering plant to one that supports MTS.  This has a big impact in Controlling and in Production Planning, so ensure that all affected functional groups are aware of what you are doing, and of the resulting changes that they will experience.  The transition from MTO to MTS must be carefully controlled.
    If you are not a PP expert, I suggest you consult with your local PP expert before embarking on this change.
    Best Regards,
    DB49

  • CO07 and special stock indicator for components

    Hello,
    My final purpose is to be able to call components from project stock in production orders without header material, created in CO07.
    I notice a strange behavior and would be glad to recieve some explanations.
    Production orders are assigned to a WBS. If I indicate the WBS in the CO07 selection screen, the special stock indicator for the components is determined as expected:
    If view MRP 4 for the component says "Individual requirements" then special stock indicator is set to "Project stock"
    If view MRP 4 for the component says "Collective requirements" then special stock indicator is set to "Common stock"
    Second scenario is that I don't provide the WBS in the CO07 selection screen, but provide it in the assignment tab later. In this case, the special stock indicator for components will always be empty (common stock) by default, without any possibility to modify this manually.
    Is anybody able to explain me why?
    Merry Christmas to all.

    Hi!
    Actually it is not related to SAP Manufacuting Execution solution - so you'd rather re-post the question to ERP-related forum. This can help you find a proper one.
    Regards,
    Sergiy

  • Special stock Indicator in process order

    Hi Guys,
    I am using Configurable material via BOM dependency. During sales order pop-up and selection are coming well. I have selected Component A1, B2, C2 with characteristic value. Now B2 and C2 have procurement type "F" and for A1 procurement type was X. After MRP run, saw in the planned order as 'special stock type E" for A1 material and in process order it is not taking plant stock. Instead it is asking for sales order stock and componet view shows Account assignment as "M" and special stock indicator as "Individual customer stock". Now I changed the procurement type as "F" and delete re-create MRP/ BOM re-run MRP........still it is not picking up plant stock in availability, instead now asking for purchase requisition. For B2 and C2, not asking for ourchase requisition as there is plant stock. . Why it is happening and how to solve it?
    Thanks
    Krish

    Solved it......It was availability check issue.

  • Special stock indicator for components

    Hi,
    For a configarable material a sales order is created which in turn creates a production order. Now in this production order for some materials i find that in component overview of production order indicator SP is 1 (Individual customer stock). This happens only in some orders for this material. i have checked the below points
    1) Individual collective indicator in material master MRP 4 view for this component is 2.
    2) Stock for the component is more that 1000 pieces in unrestricted use which is more than the orders for this material..
    3) Planning strategy for this material is 40.
    4) Availability check considers the safety stock.
    5) BOM Explosion type in customising is not considered in item overview of this component in the BOM.
    The issue raised by the customer is that as it comes as a special stock so a purchase order has to be created for this material and till then it is showed in shortage by availability check.
    Regards
    Sameer.

    Hi,
    There is no change in the material master sinnce last year. The customer is removing the special stock indicator from production order manually, but he wants to know why this is happening.
    Also checked the purchase requisitions created for this component and they have account assignment M and are pegged directly to the sales order.
    Best Regards
    Sameer

  • Regarding special GL indicator

    Hi,
    I am facing a peculiar problem regarding special GL indicator. I am in to the FBKP transaction which shows me the list of special GL with the fields as special GL indicator and account type.
    In this screen  I donot find the special G/L indicator M for account type K. When I am trying top create the same in system I get a message that special GL indicator M already exists for account type k.
    Requesting you to please help me out for thsi how to create the special GL indicator M for account type K.
    Rgds
    manish

    Hi,
    In FBKP itself you can delete existing M special gl indicator and create same , but that possible only it should not assign any gl and used.
    regards
    Surya

  • Customer Stock (Special stock indicator B and item category C)

    Dear All,
    I am mapping my service center scenario in sap,
    We are consumer product manufacturer when material is wthin warranty or outside warranty, for any defects or replacement customer come with defective material to my service center.
    When i will post receipt for the material it should be the CUSTOMER stock,
    For that i need detailed information about special stock indicator B and movement type combination.
    also item category C in purchasing documents.
    plz tell me that i can directly configure these things in sap or B and C both are standard provided by sap.
    I am using 4.7 in my system B and C both are not available.

    Hi
    In the Standard Sytem these are the special Stock Indicators
    E     Orders on hand
    K     Consignment (vendor)
    M     Ret.trans.pkg vendor
    O     Parts prov. vendor
    P     Pipeline material
    Q     Project stock
    V     Ret. pkg w. customer
    W     Consignment (cust.)
    Y     Shipping unit (whse)
    I have not found B - Special Stock indicator.
    You can use Accotunt assignment Category D  - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
    Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
    Thanks & Regards
    Kishore
    Thanks & Regards
    Kishore

  • How to use Special GL Indicator in Treasury?

    In Business Partner Master Data you assign only one reconciliation account per BP.... in this case I will have to make use of the "Special GL Indicator" where I can post to another reconciliation account which is different from the one that is already defined in the BP master data. How do I go about this in Treasury (account determination)?

    Hi Rick:)
    Sad to say, nobody gave me an answer to this one..... But I believe that after the research i've done (going through all the transactions and in spro)..... Treasury has really no functionality for GL indicator because as you know.... we don't indicate any posting keys and accounts during the transaction since everything is pre-defined based on our configuration in account determination. If you have other ideas and if you get an answer to this one, please keep me updated.
    Thanks:)

Maybe you are looking for