Special caracters in password

hi, i did choose a password with special caracter: now@!
and then it is impossible to type it the caracter @ , so i cannot boot my machine!!!
what can i do ???

Hello
Sorry but now you have a big problem. For the BIOS password or supervisor password it must be used just the following characters: a..z, A..Z and 0..9
Choosing some special characters will result in that the notebook will not start anymore. In this case, please contact your Toshiba Authorized Service Provider because the password must be deleted and there is no way that you can do it on your own.

Similar Messages

  • SMS Problems with portuguese special caracters

    I´ve recently installed the upgrade for ios 6, I became aware that  when I use portuguese special caracters(i.e. ç ã á..etc)  in an SMS message the system splits into two messages.
    Does anyone know if there is a solution for this problem?

    Hi
    Can you be more clear plz...what is stoping you to
    do your work.Follow the link.Its clearly stated with
    all the screen shots and I am sure it will help you
    http://www.auditware.co.uk/downloads/SAPQuery_step_thru.pdf
    Also check with the changes in settings>settings>Is graphical query painter checked
    and what are the below options in which radio buttons are checked in.
    Regards,
    Manjula.

  • Problems with special caracters

    Hi coleagues,
    I have problem with special caracters in querys(SQ01, SQ02, etc), in place of (ç,~,) appers #.
    Thanks in advanced for your cooperation.

    Hi
    Can you be more clear plz...what is stoping you to
    do your work.Follow the link.Its clearly stated with
    all the screen shots and I am sure it will help you
    http://www.auditware.co.uk/downloads/SAPQuery_step_thru.pdf
    Also check with the changes in settings>settings>Is graphical query painter checked
    and what are the below options in which radio buttons are checked in.
    Regards,
    Manjula.

  • Importing txt in flash 8, problems with special caracters

    i am having a problem when importing a txt file into my swf.
    When publishing it in flash player 5 the special caracters (in this
    case another language) the caracters display just fine, but when
    publishing in flash 8 they all transform into weird boxes.
    Anybody, any sugestions???
    thanks a lot

    Hade almost the same problem - - ->
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=194&threadid=1240349

  • Why where special caracters removed from the German keyboard in iOS 4.2?

    Hi,
    with iOS 3 you could access special caracters like è é etc by pressing the e key when using the standard german keyboard on the iPad or iPhone.
    This is gone with iOS 4.21 - the only additional caracter is the letter ė.
    As my first name contains the letter é this is very bothersome as I need to work with an additonal (french) keyboard layout to type my name.
    Why where most of the letters removed, when will they be back?

    This problem has been raised here a few times already. Nobody knows why Apple did this. You need to ask for a fix via this channel:
    http://www.apple.com/feedback/ipad.html

  • Using SQLDriverConnect with special characters in password fails, same info with ODBC (Oracle instant client) works fine

    Hi,
    on a windows 2008 machine that has the Oracle instant client 11_1 installed (11.01.00.06) i am calling SQLDriverConnect in the following way:
    std::string str = "Driver={Oracle in instantclient11_1};Dbq=//10.10.101.66:1521/orcl;;Uid=myUser;pwd=a;b";
    odbcRc = SQLDriverConnect(hdbc, NULL, (SQLTCHAR*)str.c_str(), str.size(), (SQLTCHAR*)szConnStrOut, 1024, &cbConnStrOut, SQL_DRIVER_NOPROMPT)) == SQL_ERROR);
    as long as the password contains no special chars (namely semicolon) it works fine. but when I try to use special chars in the password It stops working, with an invalid username/password error.
    State: 28000 Native error: 1017 Message: [Oracle][ODBC][Ora]ORA-01017: invalid username/password; logon denied
    i tried different variations of adding " (\") over the password, over the entire pwd=a;b or braces { but nothing seems to work.
    the thing is that using ODBC works! what I did was:
    open ODBC, go to System DSN tab, add "Oracle in instantclient11_1", then fill the following information:
    Data source name: Anything
    TNS Service Name: //10.10.101.66:1521/orcl
    User ID: myUser
    then i press test connection, enter the password "a;b"
    and it works!
    I cannot figure out what's my problem.
    Thanks,
    Roy.

    I've created your test table in my Oracle database using this extra character and I'm able to describe it properly.
    SQL> desc test;
    Name Null? Type
    ATTIVITÀ VARCHAR2(40)
    My character set being used is:
    SQL> select * from v$nls_parameters;
    NLS_CHARACTERSET
    WE8ISO8859P15
    NLS_NCHAR_CHARACTERSET
    AL16UTF16
    NLS_LENGTH_SEMANTICS
    BYTE
    So as long as it doesn't work for you in your native Oracle database I don't think it would work with DG4ODBC. So yes, it would be best to log a service request so that the Oracle database support can check out the NLS issue.
    Edited by: kgronau on Sep 28, 2011 9:21 AM
    To be complete here the describe of the MySQL table native and using DG4ODBC:
    mysql> create table TEST (attività Varchar(40));
    Query OK, 0 rows affected (0.00 sec)
    mysql> desc TEST;
    ---------------------------------------------------+
    | Field | Type | Null | Key | Default | Extra |
    ---------------------------------------------------+
    | attività | varchar(40) | YES | | NULL | |
    ---------------------------------------------------+
    1 row in set (0.00 sec)
    SQL*Plus: Release 11.2.0.2.0 Production on Wed Sep 28 09:20:17 2011
    SQL> desc "gateway"."TEST"@MYSQL_DG4ODBC_EMGTW_1122_DB;
    Name Null? Type
    attività VARCHAR2(80)
    So in general it should work.

  • Special Character in password!

    Hi,
    Is there any documentation exists which tell us what all special characters can be used in password?
    If we use for example "," (comma) is password then NCo returns the error "Invalid User ID / Password (repeat logon)". Where as through SAPGUI login is successful.
    Regards.

    Hi Nagaraju,
    Thanks for your reply.
    To be more specific, what I wanted to know is, if user can login through SAPGUI having comma (for example) in password, why NCo throws an exception ?
    Is there any documentation exists which says which special characters can not be used with Nco OR is there anyway to handle them ?
    Regards.

  • Special characters in passwords

    Where can I get documentation for restrictions on passwords. Like what special characters can be used in
    passwords?
    Maximum length etc?

    Passwords follow the same rules as other identifiers in the database:
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/sql_elements9a.htm#27566
    That means:
    - not case sensitive
    - 1 to 30 characters long
    - no Oracle reserved word
    - no quotation marks
    - must begin with an alphabetic character
    - only alphanumeric characters, underscore (_), dollar sign ($), pound sign (#)

  • Special characters in password?

    In DS 5.2 what special characters or nonalphanumeric charaters are allowed in passwords? Are there any that I should not allow? And are there any that I should not allow in regards to other systems using the ldap for authentication?

    You are strongly encouraged to allow only 7bit ascii characters in the userPassword. The DS has a plug-in which will check for you to prevent 8 bit characters in passwords. It is called the 7bit checking plug-in or something like that. You have to tell it which suffixes you want to check, and tell it which attributes (probably just userPassword).

  • Special characters in password for "create database link"

    It seems that one cannot create a DB link if the password has a special character in it (like '!')?
    create database link MYLINK connect to SOURCE identified by mypwd! using 'MYDB'
    - returns "ORA-00933: Command not properly ended"
    create database link MYLINK connect to SOURCE identified by values 'mypwd!' using 'MYDB'
    - returns "ORA-00988: missing or invalid password(s). This is the syntax that works in "create user".
    Nikolai

    1* create database link MYLINK connect to SOURCE identified by "mypwd!" using 'MYDB'
    SQL> /
    Database link created.
    SQL>
    Joel Pérez

  • Create / Alter user doesn't allow special characters in password

    When i try to change the password from say : vos1s05 to : vos1s05! i get the error message (missing or invalid option), i have used several special characters and all give the same error, is there a way to circumvent this, or will this be enabled in a new release ??

    A password is classified as an oracle identifier and must conform to the rules for indentifiers. To include special characters you need to enclose it in double quotes e.g. "vos1s05!"

  • Yosemite doesn't recognize special characters in password when logging in

    Hi everyone,
    I installed Yosemite yesterday on my mid-2011 MBA and discovered that after restarting it, I was unable to log into it. First, I'd like to precise that I'm using a French keyboard, it could have an importance afterwards.
    The password I use for my account is quite complex and uses a special character. Until now, it worked perfectly, but I discovered that, on Yosemite, I have to type twice the special character and the one after, in order to get it worked. Otherwise, it acts like if I haven't typed these two.
    Also, this behavior is kind of weird because if I log out, I don't have the issue: it works perfectly. So the issue is just after a shut down/restart.
    The only way I could restart the first time was by using the tool made from Apple when you loose your password (pressing the power button until it shuts down). Once my laptop entered that mode, I could just type my current password and choose a new one. But still, I don't get why it works on every screen, except the one after a shut down/restart.
    I hope Apple could bring a quick fix for that because it's really annoying. Also, if someone gets the same issue, try to type twice the special character(s) and maybe the one(s) that is/are just after.
    Bye.

    A password is classified as an oracle identifier and must conform to the rules for indentifiers. To include special characters you need to enclose it in double quotes e.g. "vos1s05!"

  • ASA SSL Authentication special caracters

    Hi,
    I have a ASA 5540 configured in WebVPN to authenticate users through an ACS server. The ACS server can use my Active Directory Users Database.
    a user with those credentials:
    login : testuser
    pass : céli20
    can login through Remote Access VPN (classic cisco ipsec vpn client)
    but can't throught webvpn portal page..!!If we change the password and remove the "é" it can log-in...How to allow specials characters in the webvpn session connection?

    ASDM does not support any non-English characters or any other special characters. If you enter non-English characters in any text entry field, they become unrecognizable when you submit the entry, and you cannot delete or edit them.
    If you are using a non-English keyboard or usually type in language other than English, be careful not to enter non-English characters accidentally. For a workaround, see caveat CSCeh39437

  • OpenSSO 8 configurator error due to special characters in password

    We got the same AMSetupServlet StringIndexOutOfBoundsException described in thread 5356908 when running the GUI configurator in OpenSSO Enterprise 8.0 Update 1 Patch 1.
    As in that posting, the error was caused by a special character in the password ($ in this case).
    So it seems that the fixes mentioned by kujalli didn't address this issue.

    Hello All,
    the second issue is resolved as i replaced some other character and included the two necessary for me and the issue is solved.
    For first issue, i found an OSS notes 173241, which says character # cannot be loaded alone. But the OSS notes is for version 3.1 and i am not sure whether the issue is fixed in 7.0 version
    Regards
    Suresh Kumar

  • Connect to SAP BW and using special characters in password is not working

    Hi guys,
    I connect to a SAP BW System. When I'm using the special character & in my password, I can't connect as the universe designer says that I entered the wrong password. If I remove the special character the connection works and I can select a query.
    Is this a know bug? What can I do?
    Regards,
    Christian
    Edited by: Christian Röttgers on Nov 12, 2009 9:39 AM

    Hi Christian,
    According to my knowledge this is not a know issue.
    I recommend you create a support case in order to have your issue fixed.
    Regards,
    Didier

Maybe you are looking for