Special Character CDATA

Hi Team,
I did go through the earlier posts on CDATA.. we were just not able to get the desired results.
We have a RDF report where we extract the field Invoice description from the database. The description has special characters, we want the xml not to parse the Invoice description column...
We tried to change the xml tag in the RDF to ![CDATA[INVOICE_DESC]]...but we did not get the desired results..
Please let us know where do we need to place the CDATA
Thanks and regards
ramanathan

Has someone tried using CDATA in the RDF.. please help us it is urgent

Similar Messages

& special character problem with parseXML() and parseEscapedXML().

Hi,
I'm having a problem to parse messages that has '&' character. According to metalink note 1340195.1 I tried to use parseXML instead of parseEscapedXML, still had same problem. Then added the following scope that replaces "&" with "& a m p ; a m p" (without spaces). Tried to use the java code as mentioned in the metalink note...
    <scope name="Replace_spec_char_scope">
      <faultHandlers>
        <catchAll>
          <sequence name="Error_Sequence_9_spec_char">
            <assign name="Assign_Error_Message_9">
              <copy>
                <from expression="ora:getInstanceId()"/>
                <to variable="Error_Handler_Invoke_initiate_InputVariable"
                    part="payload"
                    query="/ns8:ErrorHandlerProcessRequest/ns8:instanceId"/>
              </copy>
              <copy>
                <from expression="string('XXOGL.B106.001')"/>
                <to variable="Error_Handler_Invoke_initiate_InputVariable"
                    part="payload"
                    query="/ns8:ErrorHandlerProcessRequest/ns8:errorCode"/>
              </copy>
              <copy>
                <from expression="ora:getProcessId()"/>
                <to variable="Error_Handler_Invoke_initiate_InputVariable"
                    part="payload"
                    query="/ns8:ErrorHandlerProcessRequest/ns8:process"/>
              </copy>
              <copy>
                <from expression="string('Receive_Kund')"/>
                <to variable="Error_Handler_Invoke_initiate_InputVariable"
                    part="payload"
                    query="/ns8:ErrorHandlerProcessRequest/ns8:activity"/>
              </copy>
              <copy>
                <from expression="ora:getFaultAsString()"/>
                <to variable="Error_Handler_Invoke_initiate_InputVariable"
                    part="payload"
                    query="/ns8:ErrorHandlerProcessRequest/ns8:errorPayload"/>
              </copy>
              <copy>
                <from expression="bpws:getVariableData('Receive_Kund_Dequeue_InputVariable','Message','/ns6:Message/Kund')"/>
                <to variable="Error_Handler_Invoke_initiate_InputVariable"
                    part="payload"
                    query="/ns8:ErrorHandlerProcessRequest/ns8:inputPayload"/>
              </copy>
            </assign>
            <bpelx:exec name="Log_Error_9" language="java" version="1.5">
              <![CDATA[OGLLogger logger = new OGLLogger("B106.bpel");
try{
    Element errorDetails= (Element)getVariableData("Error_Handler_Invoke_initiate_InputVariable","payload","/ns8:ErrorHandlerProcessRequest/ns8:errorPayload");
    logger.error("XXOGL.B106.001","InstanceID: "+getInstanceId()+" Error details: "+errorDetails.getFirstChild().getNodeValue());
}catch(BPELFault e){
    addAuditTrailEntry(e);
    logger.fatal("Failed to log error details for message XXOGL.B106.001",e);
}]]>
            </bpelx:exec>
            <terminate name="Terminate_1"/>
          </sequence>
        </catchAll>
      </faultHandlers>
      <bpelx:exec name="Replace_spec_char" language="java" version="1.5">
        <![CDATA[java.lang.String temp = (String) getVariableData("Receive_Kund_Dequeue_InputVariable");
      OGLLogger logger = new OGLLogger("B106.bpel");
try{
temp = temp.replaceAll("&", "&amp");
setVariableData("Receive_Kund_Dequeue_InputVariable", temp);
}catch(BPELFault e){
    addAuditTrailEntry(e);
    logger.fatal("Failed to replace special character ",e);
}]]>
      </bpelx:exec>
    </scope>Now getting this error.
<scope name="Replace_spec_char_scope">
Replace_spec_char(faulted)
[2012/05/18 11:16:28] "{http://schemas.oracle.com/bpel/extension}runtimeFault" has been thrown. less
-<runtimeFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>java.lang.ClassCastException
</code>
</part>
-<part name="summary">
<summary>com.collaxa.cube.engine.types.bpel.CXMessageVariable
</summary>
</part>
-<part name="detail">
<detail>
java.lang.ClassCastException: com.collaxa.cube.engine.types.bpel.CXMessageVariable
     at bpel.xxogl_b106_kundinterface.ExecLetBxExe5.execute(ExecLetBxExe5.java:197)
     at com.collaxa.cube.engine.ext.wmp.BPELXExecWMP.__executeStatements(BPELXExecWMP.java:50)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:200)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:4174)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1680)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:238)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:335)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:6285)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1111)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:650)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:381)
     at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
     at com.evermind.server.ThreadState.runAs(ThreadState.java:705)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at CubeDeliveryBean_LocalProxy_4bin6i8.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:148)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:58)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
     at java.lang.Thread.run(Thread.java:595)
</detail>
</part>
</runtimeFault>
<catchAll>
<sequence>
Assign_Error_Message_9
[2012/05/18 11:16:28] Updated variable "Error_Handler_Invoke_initiate_InputVariable" More...
[2012/05/18 11:16:28] Updated variable "Error_Handler_Invoke_initiate_InputVariable" More...
[2012/05/18 11:16:28] Updated variable "Error_Handler_Invoke_initiate_InputVariable" More...
[2012/05/18 11:16:28] Updated variable "Error_Handler_Invoke_initiate_InputVariable" More...
[2012/05/18 11:16:28] Updated variable "Error_Handler_Invoke_initiate_InputVariable" More...
[2012/05/18 11:16:28] Updated variable "Error_Handler_Invoke_initiate_InputVariable" More...
Log_Error_9
[2012/05/18 11:16:28] bpelx:exec executed
Terminate_1
[2012/05/18 11:16:28] Instance terminated. Don't really understand what's wrong... Am I doing it incorrectly? Can anybody pls help!!
Thanks in advance.
Lisan

Try to use parameters instead hardcoding values in the queries:
select * from user where lower(username)=?;
and don't forget to lower the value from java side as well ;-)

Parsing xml that contains special character

this is my xml file.
<?xml version="1.0" encoding="ISO-8859-1" ?>
<grid_assessment>
     <chart>
          <range>5</range>
          <sharing_charging>
               <score>3</score>
               <label><![CDATA[SHARING & CHARGING POLICIES]]></label>
this is my java code.
          SAXParser parser = new SAXParser();
          parser.setContentHandler(this);
          parser.setErrorHandler(this);
          try
               fis = new FileInputStream(xmlFile);
          catch(IOException ioe)
               System.out.println( ioe.getMessage() );
          InputSource inputSource = new InputSource((InputStream)fis);
          try
               parser.parse(inputSource);
          catch(SAXException saxe)
               System.out.println( saxe.getMessage() );
          catch(IOException ioe)
               System.out.println(ioe.getMessage());
when i parse the xml file, i got an error message like this.
org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference.Stopping after fatal error: The entity name must immediately follow the '&' in the entity reference.
is there anybody who knows how to parse the xml file that contais special character?
i tried "&" instead of "&". but it didn't work...
please help...
thanks in advance...

this is my java code.
          SAXParser parser = new SAXParser();If that is javax.xml.parsers.SAXParser then your code won't compile; i suspect you might be using some non-standard parser?
          parser.setContentHandler(this);
          parser.setErrorHandler(this);These methods are deprecated.
when i parse the xml file, i got an error message like this.
org.xml.sax.SAXParseException: The entity name must
immediately follow the '&' in the entity
reference.Stopping after fatal error: The entity name
must immediately follow the '&' in the entity
reference.I don't; maybe it's your parser. What parser are you using, and what version?
is there anybody who knows how to parse the xml file
that contais special character?There is nothing more you need to do; the codeimport javax.xml.parsers.*;
import org.xml.sax.helpers.DefaultHandler;
import org.xml.sax.*;
import java.io.*;
public class CeasarKim1Parser extends DefaultHandler {
public static void main (String[] args) {
    try {
      SAXParser parser = SAXParserFactory.newInstance().newSAXParser();
      FileInputStream fis = null;
      fis = new FileInputStream(args[0]);
      InputSource inputSource = new InputSource((InputStream)fis);
      parser.parse(inputSource, new CeasarKim1Parser () );
    } catch(SAXException saxe) {
      saxe.printStackTrace();
    } catch(IOException ioe) {
      ioe.printStackTrace();
    } catch (ParserConfigurationException pce) {
      pce.printStackTrace();
public void characters(char[] ch, int start, int length) {
    System.out.println(new String(ch, start, length));
// similar implementations of the other content handler methods
}which is basically a compilable and non-deprecated version of yours, with the file<?xml version="1.0" encoding="ISO-8859-1" ?>
<grid_assessment>
<chart>
    <range>5</range>
    <sharing_charging>
      <score>3</score>
      <label><![CDATA[SHARING & CHARGING POLICIES]]></label>
    </sharing_charging>
</chart>
</grid_assessment>does not generate any exceptions and parses the CDATA section correctly. That is using 1.4.1 and the default org.apache.crimson.jaxp.SAXParserImpl parser.
Pete

Error while releasing transport request - Special character "_" in generic

Hi all,
we're receiving the error Special character "_" in generic key when releasing a best practice transport.
Note 1304725 describes my error, but the solution cannot be implemented. The reason for this is that we do not have an individual entry for eacht yb_PS,..,
but we have only one entry where field BWERT has a wildcard '*' as entry.
Does anyone has some idea how to solve this ?
kind regards !

Hello Bjorn,
How did you get this solved?
I'm having nearly the same issue:
A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
60, there's no message rejecting the entry.
Regards

Error "TK287" when releasing a request - Special character "_" is invalid.

I have some tables in Solution Manager and having some warnings:
Table: CRM_SVY_DB_ST
Field value:CRM_SVY_GENERATE_BSP_TEMPLATE.XSLT
Field: TRANSFORMATIONID
It doesn´t accept the special character "_"
Below the error when releasing and the explanation of the error in the sequence.
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_SERVICE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Key messages: TABU CRM_SVY_DB_ST 300DSWPCI_SERVICE_FDBCK 0000000000DCRM_
Special character "_" in generic key
Explanation of the error:
Special character "_" in generic key
Message no. TK287
Diagnosis
The generic key 300DSWPCI_ISSUE_FDBCK 0000000000DCRM_ was entered for the object CRM_SVY_DB_ST. All keys that match up to the asterisk are to be transported.
The key cannot have any special characters before the asterisk, since they are interpreted in different ways by different database systems.
The key contains the special character _.
System Response
The entry is rejected.
Procedure
Extend the generic entry, or specify all keys individually.

Hi,
Go through SAP note 711103 & 688363.
Regards,
Sachin Rane.
Edited by: Sachin Rane on Mar 12, 2009 2:48 PM

File Adapter - special character in Filename

Hi,
i have a question concerning file adapter.
Scenario: we are polling files via file sender adapter (FTP).
Problem: if the filename contains a special character, an error is thrown with 'The System cannot find the file specified'
Scope: Special character in filename (not in payload)
Installed: XI 3.0 SP 19 on Linux
Questions:
- what FTP implementation does XI use?
- What do i have to check/upgrade to unicode?
- is it an OS problem or an Java problem or a XI problem?
- or is it not possible copiing files with special characters in filename?
Thank you very much in advance.
Michael

Hi Michael,
The file/FTP adapter supports both passive and active FTP data connection. You can select the data connection while configuring the adapter.
The file/FTP adapter follows specification RFC 959. The specification can be found on the Internet under www.ietf.org/rfc/rfc0959.txt.
For FAQs about the file/FTP adapter, see SAP Note 821267. Please note that you'll need an account to log in on service.sap.com.
Question: How are you specifiying the file name? i.e. Are you using placeholders, like ?, *, *.txt, etc ?
If there's a problem with the filenames, then it should be a problem in the JAVA implementation of the adapter I assume. So you could for instance build your own adapter extension to by-pass that problem.
Just for your information; I haven't encounter a problem with filenames in other projects.
Good luck!

Xml publisher reprot - special character problem

I invoice report through xml publisher. I have '&' special character in vendor list. I am getting below error
A semi colon character was expected. Error processing resource.
Below is the code
CREATE OR REPLACE PACKAGE BODY XML_RPT AS
    FUNCTION XML_TAG (p_tag IN VARCHAR2, p_data IN VARCHAR2) RETURN VARCHAR2 IS
    l_ret_str VARCHAR2(5000);
    BEGIN
        l_ret_str := '<'||p_tag||'>'||p_data||'</'||p_tag||'>';
        RETURN l_ret_str;
    END XML_TAG;
     PROCEDURE VENDOR(errbuf          OUT VARCHAR2,
                     retcode         OUT NUMBER) IS
    CURSOR inv_Cur IS
        select pv.vendor_name
        from po_vendors pv;
     xmldata            varchar2(1000);
     l_sqlstr           varchar2(1000);
     l_seqnum           varchar2(3);
     l_vendor_name      varchar2(100);
    BEGIN
      xmldata := '<?xml version="1.0" encoding="UTF-8"?>';
      xmldata :=xmldata|| '<VENDOR>';
      xmldata := xmldata||' <LIST_VENDOR>';
      fnd_file.put_line(fnd_file.output,xmldata);
      FOR rpt_rec IN inv_Cur LOOP
          xmldata := '<VENDOR_REC>';
          l_vendor_name := replace(rpt_rec.VENDOR_NAME,'&','&amp');
          xmldata := xmldata || XXMCG_XML_TAG('VENDOR_NAME',L_VENDOR_NAME);
          xmldata :=xmldata|| '</VENDOR_REC>';
          fnd_file.put_line(fnd_file.output,xmldata);
      END LOOP;
      xmldata := '</LIST_VENDOR>';
      xmldata := xmldata||'</VENDOR>';
     fnd_file.put_line(fnd_file.output,xmldata);
    EXCEPTION
    WHEN OTHERS THEN
         fnd_file.put_line(fnd_file.log,substr(SQLERRM,1,500));
    END VENDOR;
END XML_RPT;can any one advice.

Duplicate post ? xml publisher report problem
Srini

How can I use Greek symbols in a text in Pages? Greek symbols are not in the special character list.

How can I use Greek symbols in a Pages text? Greek symbols are not included in the special character collection.
I need to import for example a sigma from Word or Adobe illustrator and then Pages can recognise it. I can not find it from within Pages.

Special character palette from the edit menu does have sigmas under European ... > Greek ...
You can do a search at the bottom of the Special Character palette. Double click on the greek capital letter sigma. You will get a lot of sigmas.

Orchestration exception:Exception occurred when persisting state to the database because of special character ' ' in HL7 message.

In some scenarios HL7 message is coming with special character ‘’ and HL7 dis-assembler escaping this character with “”. But while sending out (pass thru pipeline but orchestration trying to persist here at last sendshape.) from orchestration
this message failing with the error “Exception occurred when persisting state to the database.”
As per the analysis , Orchestration is unable to convert to xml document from a
XLANGMessage because of this special character. We have tried to call custom .net class with following code and its failing here as well (I think orchestration also trying to do same way and failing with the message and failing with same error.).
public void ProcessRequest(XLANGMessage reqMessage)
XmlDocument xmlDocument = (XmlDocument)reqMessage[0].RetrieveAs(typeof(XmlDocument)); It is failing here with the error
“ ', hexadecimal value 0x10, is an invalid character. Line 1, position 1865. “
Note : Please find the special character in the attachment circled in red color.

Hi ,
Please find the xml and the screenshot.
<OBX_ObservationResult>
<OBX_1_SetIdObx>3</OBX_1_SetIdObx>
<OBX_2_ValueType>TX</OBX_2_ValueType>
<OBX_3_ObservationIdentifier>
<CE_0_Identifier>P.112</CE_0_Identifier>
<CE_1_Text>Where pt. will be transported to \T\ where famly can wait:</CE_1_Text>
</OBX_3_ObservationIdentifier>
<OBX_4_ObservationSubId />
<OBX_5_ObservationValue>Y</OBX_5_ObservationValue>
<OBX_6_Units>
<CE_0_Identifier />
</OBX_6_Units>
<OBX_7_ReferencesRange />
<OBX_8_AbnormalFlags />
<OBX_9_Probability />
<OBX_10_NatureOfAbnormalTest />
<OBX_11_ObservationResultStatus>N</OBX_11_ObservationResultStatus>
</OBX_ObservationResult>

Need to prevent special character in generated XML file

Hello,
I am using E-business Suite 12.1.3 and XML version 5.6.3.
My XML file is ending up with a special character (a Latin capital letter U with circumflex) at the end, after the final closing tag.
Due to this the concurrent program that needs to output the XML is ending with warning.
My XML file is produced using a PL/SQL procedure, as follows (I've simplified it):
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0" encoding="UTF-8" ?>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<DOCS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<LETTER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<EMP_NAME>Michaela Hart</EMP_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</LETTER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</DOCS>');
But when I run the concurrent request that creates the output then try to view the output in Internet Explorer I get the following error:
Invalid at the top level of the document. Error processing resource 'http://servername.domain...
</DOCS>
If I view the source of the page in Internet Explorer it shows a square after </DOCS> indicating the special character that has been added.
I checked this by looking at the output file in unix (cat -v o7766582.req) and it showed up the Latin U character.
I realise it could be to do with the character set I am using. I checked what we had on the server:
> echo $NLS_LANG
American_America.UTF8
I would have thought that corresponded with the XML declaration character set but I'm not sure.
Does anyone have any other ideas about why I have this special character, and how it could be removed?
Thanks in advance,
Hazel

Hi AlexAnd,
thanks very much for your reply.
I'm now unable to recreate the problem since dbms_xmlgen worked. If I switch back to my previous method it works fine!
I'm not sure your suggestion would help, as there were no special characters in the data, the special character was added after the last tag I output. I hard coded the data (as in my example) for testing purposes so there was no SQL in use and the special character was still added at the end of the XML output. But I will definitely give it a try if I get the problem again.
I had the idea that maybe I should have been using FND_FILE.PUT rather than FND_FILE.PUT_LINE but now the error is gone I can't tell if that would have solved the problem either.
I appreciate your input.
Regards
Hazel

Special character in some of the employee records

Hi,
I have found special character in some of the employee records which is causing some reports to error out. Our instance is configured for English language and these special characters are unrecognized by the application. I have attached some employee names with the special character below.
Request you to please look into this and reply ASAP.
===
Employee Number      Full Name
1278     M_ü_ller-Seydlitz, Mrs Hilda Suzanne
1009     Evas, Mrs Sîan* Elynda
===
Regards
Parvathi Arun
+919840861075
[email protected]

first you need to create a database function like the one below.
the query to identify those records is then the below:
select full_name from per_people_x
where is_not_valid_text(full_name) = 'N'
you can use the function also to verify other fields like addresses and so on.
the corrective action according to me should be a manual one, meaning open the form and update the names not compliant.
thanks
regards
create or replace
function is_not_valid_text (p_text in varchar2) return varchar2 is
v_is_valid varchar2(100) := 'Y';
v_length number := length(p_text);
begin
for i in 1 .. v_length loop
if not ( -- allowed char
ascii(substr(p_text, i, 1)) between 65 and 90 -- from A to Z
or ascii(substr(p_text, i, 1)) between 97 and 122 -- from a to z
or ascii(substr(p_text, i, 1)) = 32
or ascii(substr(p_text, i, 1)) = 46
) then
v_is_valid := 'N';
exit;
end if;
end loop;
return v_is_valid;
end is_not_valid_text;
Edited by: Giuseppe Bonavita on 10-Dec-2012 11:43

Table Maintainence generator Error Special Character '_' in generic key

Hello,
I have created a Table which contain 6 fields. All the fields of the table are primary key. The combined length of all the primary key is 163 characters. In the activation Log of the table we have a warning message which states "Key length > 120 (Restricted functionality)". Initially we are able maintain the entries using SM30. BUt now when we are making the entreis in the table an error message comes. The error is Special character "_" in generic key.and we are not able to save the entries.
I have deleted the table maintainence generator and have regenerated it. But the same error is coming.
Please provide your suggestion.
Thanks,
Mohit

Please provide your suggestions
Thanks,
Mohit

Error: Invalid dimension member with special character / in BPC NW 7.5 SP7

Hi experts,
We are encountering the following problem in our Financial Planning application.
We are migrating our existing BPC solution from one server to another through backup and restore. The existing solution was on BPC NW 7.5 SP 5. The profit_centre dimension in the existing solutions has several member ids with special character '/' (forward slash). The dimension never threw an error when processed in the existing solution and there is planning transactional data against these member ids.
While the entire configration , appset , files were successfully restored through UJBR on the new system (BPC 7.5 SP7) through UJBR (backup and restore), the masterdata could not be restored only for this Profit_centre (masterdata for other dimensions were processed successfullu). All the member ids with / are rejected for this dimension. The same error is thrown if processed through the admin client from the member sheet.
Error: Dimension member PC_FF/WS/NT is an invalid member ID
Error in Admin module
Is there any setting which need to be made to allow / character in member ids? Any suggestion to get around this problem would be much appreciated.
Thanks
Abhiman

Hi Abhiman,
Yes, you need to maintain the transformation file to correct all dimension member IDs. Can you please refer to the following link with a similar issue:
conversion file formula not working
Hope this helps.
Rgds,
Poonam

Error wirh release of the requets Special character "_" in generic key

Hello
I am trying to release the request, this reques was generated to installation the baseline for Peru but I got this message:
Key messages: TABU TFAWC 200SAPLCATS 2100TCA
Special character "_" in generic key
Special character "_" in generic key
Message no. TK287
Diagnosis
The generic key 200SAPLCATS 2100TCA was entered for the object TFAWC. All keys that match up to the asterisk are to be transported.
The key cannot have any special characters before the asterisk, since they are interpreted in different ways by different database systems.
The key contains the special character _.
System Response
The entry is rejected.
Procedure
Extend the generic entry, or specify all keys individually
Any sugstion for this message?
thanks
Danny

Hi Danny,
Could you resolve issue Message no. TK078, I'm config SD and when i assign division and dis.channel to sales org those action does not show error but when i check request consistensy in se03 i have below error.
=====================================================
Object TDAT OVXA has object function "K", but no key
Message no. TK078
Diagnosis
The request/task cannot be saved because an object entry with function K
    does not have a key.
System Response
The system did not save the entry.
The cursor appears on the incorrect entry in the editor.
Procedure
Press Enter once. This branches to the object list in the editor and
    positions the cursor on the incorrect object entry.
Correct the object function or enter keys for the object entry.
============================================
I had follow procedure but it do nothing.
Anybody can help Pls !
Thanks and Best regards.

Special character in interactive report using filter

Hi,
I created an interactive report and in this report there is a filter to search any row from specific value linked to a specific column.
As example this report displays a board with some columns like "SR number", "Status", "Description", ....
If I use this filter with standard character all works fine :
- in the filter's list of values I choose "Region" column
- in the search field I put "SE"
- click on go and the board is generated with all correct rows.
If I use this filter with special character (french character in my case), this filter changes this special character and the request doesn't return any row.
Example :
- in the filter's list of values I choose "Statut" column
- in the search field I put "Réception"
- the filter's expression is modified from "Réception" to "RÃ©ception" so no row is returned (filter - Statut contains 'RÃ©ception' - no data found)
I modified the character set used by the apex DAD changing the nls_lang parameter in the wdbsvr.app file from AMERICAN_AMERICA.WE8ISO8859P1 (database character set) to AMERICAN_AMERICA.AL32UTF8
But when I check the apex DAD character set after the web server restart (about Application Express in my workspace) I get :
NLS_CHARACTERSET: WE8ISO8859P1
DAD CHARACTERSET: ISO-8859-1
No change.
I used the Application Express 3.2.0.00.27 with Oracle E-business Suite (11.5.10.2).
Any help will be appreciated.
Best regards,
Olivier
Edited by: oll on 1 mars 2010 20:57
Edited by: oll on 15 mars 2010 21:17

Hi,
Thank you for your answer.
But I already installed french language on apex.
Unfortunately issue occurs yet.
To install the french language I followed these steps :
- I set the NLS_LANG to American_America.AL32UTF8
- sqlplus sys/**** as sysdba
- ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
- and I executed the load_fr.sql script
Thank you for your help.
Best regards,
Olivier

Special Character CDATA

Similar Messages

Maybe you are looking for