Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Similar Messages

Erros while loading data from SAP R/3

Hi Friends.,
I'm going to load data from SAP R/3 all FI Modules to SAP BW in SAND BOX, before going to load master and tran data i would like to know, what are the errors might usualy be occurred while loading master & tran data using completly Business Content Objects?
Pls can anybody tell me ?
Regards.,
Balaji K. Reddy

Hi,
Some of the errors will be :
1. Missing master data while loading transaction data.
2. Invalid characters
3. RFC errors
4. Data format errors
5. IDoc errors
6. Locks
7. Table space errors
Also look at the thread below :
Troubleshoot Errors while Data Extraction...!!!
Cheers,
Kedar

Issue while loading data from DSO to Cube

Gurus,
I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
All the loads are managed through Process Chains.
Would there be any reason in specific/particular for this type of problem?
Any pointers would be of greatest help !
Regards,
Yaseen & Soujanya

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
Thanks

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

Error while loading data from application server

Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
Praveen

It looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian

Error while loading data from R/3 to PSA

Hi,
While loading data from R/3 to PSA i am getting error 'the argument 0.6 j cannot be interpreted as a number when assing application structure.Actually in R/3 0.6 and JPY are 2 different columns.So when loading J is getting concatenated with 0.6,so i think i am getting this error.
Hope i am clear.
please help me to resolve this issue.
Thanks in Advance,
Girish

Hi,
U have to go thru the note and chk/compare the settings with ur system...i.e packages, levels...
If not take the assistance from BASIS...
Note; And also all the notes may not be the exact note tht matches ur issue always...its jst a comparision within our system...If it doesn't solve our issue we have to search for another alternative...
rgds,

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data from R/3 into DSO

Hi,
While loading data from 2lis_02_s012 into a DSO the following error occured:
=============================================
Diagnosis
    Updating for the information structure is still activated in client 150
    (and possibly also in other clients).
System Response
    o   It is not possible to upload data in the initial mode.
    o   Generation of the delta update was terminated.
Procedure
    1. Switch off updating in all system clients.
    2. Repeat the relevant activity.
=============================================
Anyone plz help me in solving the issue.
Thanks & Regards,
VN.

Hi VN,
1. Incase you do full update , system will allow you to load without any error.
2. In case you want to do init then
      Lock users
      Stop the update in the system .
      Load init Package
      Start the update
      Unlock users.
      Load delta package.
Hope it helps.
Regards
Mr Kapadia

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Regarding Short Dump While loading data from DB Connect

Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am getting

hi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..)

Error While loading data from 8 DSOname to Cube.

Hi All,
while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
Thanks and Regards,
santosh.

HI All,
In ST22 i'm getting Short Dump, the Error massage is
MESSAGE_TYPE_X
WHAT HAPPEN
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error Analyis is:
Short text of error message:
Generic process chain
Long text of error message:
Technical information about the message:
Message class....... "RSMPC"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
"MESSAGE_TYPE_X" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
"IF_RSPC_EXECUTE~EXECUTE"
there is any Patch Problem...
Please let me Know how to resolve this issue.
thanks and regards,
santosh.

Error while loading data from ECC to BI

Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
Thanks

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Error while loading data from FDM (EPM 11.1.1.3)

Hi,
We are loading data into HFM from FDM. While loading data from FDM it is throwing an error which as below.
"Load data started: 5/20/2012 9:30:45 PM
Line 27, Error: Cell for Period Mar is not an input cell.
Actual,2011,Mar,YTD,ENT_JJ,JPY,A23232323,ENT_J76;[None];[None];[None];ICP_Load;3463437"
There were multiples lines which are throwing error.
After doing some checking we found that when we unpost ICP data in HFM we were able to load data from FDM. We have not locked the ICP entities because that will restrcit to load data. But we are not able to understand just unposting the ICP values why we are able to load data from FDM. Also we have not closed the period in HFM.
Kindly suggest, what could be the possible reason.
Thanks
Edited by: user12121146 on May 27, 2012 5:29 AM

one way to figure this out, would be to open a grad at the same POV.
It will rule out a couple things.
If it is locked, you'll visually see that it is locked. (will be grey I believe)
If it is an invalid intersection, you'll see that as well. (will be red)
If you do not have access to the cell, you will see that if you look at cell status, it will say NO ACCESS.
That should help you figure out what is happening, the quick and dirty way.

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Special character issue while loading data from SAP HR through VDS

Similar Messages

Maybe you are looking for