Special characters in SBWP dynamic columns are not showing for some users

Hi experts,
We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
Are there any workflow/user settings need to be changed.
Thanks
Gopal

I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

Similar Messages

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

True colors are not showing on some photos.

True colors are not showing on some photos. Today a black sweatshirt displayed as blue. Is there an adjustment?

Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

Services for object box not visible for some users

Dear All,
PM module experts please help. In equipment master transaction IE02 in left hand top corner we get box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem is it is not visible for some users. Our security/authorisation team has also done some check but didn't get any solution.
anybody knows the reason why there is no box availabe?
Thanks
SR

Dear Siddhartho Raha
I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
note are like this way 492331,this is not related to your query but same like it is and also may be
Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
Hope this may helps you
Prem.

Time column duration not showing for my podcast

the time column duration is not showing for my podcast shows on the iTunes Store: https://itunes.apple.com/us/podcast/income-press-podcast-blogging/id500448874
For some odd reason it just stopped showing the duration.
Any help or ideas would greatly be appreciated.
Thanks,
Joey

Your feed is at http://feeds.feedburner.com/incomepresspodcast
You have no 'itunes:duration' tags in the feed, which are necesssary for the duration to show in the Store and when subscribing, though in that case the duration will show once the show has downloaded as the iTunes application will detect it from the file itself. In order to show the duration in the Store you need to add this tag, though I can't advise on how to go about it in Wordpress.

Lov Values are not showing for Discoverer Reports in Application

Hi,
I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
Regards,
Hanimi.

Hi,
Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
Rod West

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Outlook Anywhere not working for some users

Hi All,
I am having a strange issue today with a customer -
Outlook Anywhere has been enabled on their Exchange 2010 environment, but it doesn't work for some users.
Using the ExRCA I have been able to identify the following error on the users who are unable to connect:
"Testing the MAPI Mail Store endpoint on the Exchange server."
"Attempting to log on to the mailbox"
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.
On users that are able to connect it goes through the ExRCA without any issues.
Any help would be much appreciated.
Cheers,
Jack
Testing the MAPI Mail Store endpoint on the Exchange server.
An error occurred while testing the Mail Store.
Additional Details
Elapsed Time: 333 ms.
Test Steps
Attempting to ping the MAPI Mail Store endpoint with identity: outlook.mg.com:6001.
The endpoint was pinged successfully.
Additional Details
Attempting to log on to the Mailbox.
An error occurred while logging on to the Mailbox.
Additional Details
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.

Hi,
I notice that this issue only impact "some users".
I suggest double confirm whether the Outlook Anywhere configuration set correctly on Outlook client. Pic as blow:
Thanks
Mavis Huang
TechNet Community Support

Fixed values of dynamic attributes are not displayed for bid response

Hi
I have created a bid with dynamic attributes and have weighted the options with fixed values. I publish the Rfx (bid) and all is ok. The problem is that the fixed values are not displaying when doing a bid response.
We are using SRM 7.0
Can anyone help?

No. Not yet. I think it is a bug. You should create an OSS message to SAP and ask them to pay special attention to the following code block:
Class: /SAPSRM/CL_CH_WD_DODM_DYNATTR
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
At the end of the method, look for code context:
IF lv_object_type = c_qte.
*Set the Fixed Values Table to Invisible
lv_visible = abap_false.

Photos are not syncing for some reason.

Photos taken on my Treo 755p are not transferring to my computer. They used to transfer to the 'Palm' folder under 'My Pictures' on Windows XP. The transfer used to occur with no problem...but I'm currently not having any luck. I went so far as to backup my Palm files, delete the Palm Desktop software, re-install it and then HotSync the new software with my phone. Does anyone have any tips???
Your help is much appreciated!
Thanks!
Drew
the
Post relates to: Treo 755p (Verizon)

The downloadable versions of Palm Desktop don't include a Media conduit (though I think the 6.2.2 version does, but it's for Vista users).
You should be using the version that came with your installation disk to get the Media conduit.
You can use version 6.2.2 on an XP box, but I feel it's a "less-capable" version than 4.2
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

FORMS: Reader Enabled forms are not saving for all users

I have created several fillable forms with both Acrobat Pro 8 & 9. All have been created with Extend Reader Rights In my testing i have success saving the forms in Reader (various versions as old as 7).
After sending the forms out via email the saving functionality is hit and miss for all of our employees. Some can save others cannot. I can't seem to find a common thread as to why this is happening.
All forms are created on a Mac OS X 10.6.1 and then sent out via email to Windows and Mac users about 50/50. Both OS users are having trouble
There is no need to collect the data on a server or anything just trying to make it easier and waste less paper. We don't mind send PDF attachments all the time.
Any help would be great!
Thanks!

here is one of the forms that is not working in Reader (except on my wife's PC and another Mac) it is the current PDF form i am having trouble with. If we can resolve the issue then it will help me resolve my other forms too. I have made them all using the same process. (Maybe therein lies a problem)
Form Creation Process:
Create initial page layout in Pages (mac app for those that are not familiar)
Export as PDF
Open PDF in Acrobat Pro 9 (started making forms in v8 now i am working in v9 - both have produced this problem)
Run Form wizard, adjust fields, save final version of form
Extend Features in Adobe Reader (via Advanced menu) - Follow steps to save a new Reader Enabled version
Email new RE version to co-workers
All can fill out the form, only a couple can actually save the partially completed / fully completed form for reference, filing, or submission.
Am I missing something? Thanks for all the help so far!

Notifications are not sent to some users, even after the status is green.

Hello
There are some notifications sent to many(4 to 5 users and i am one of them) users from the SAP system. And i can see in the SCOT transaction that the notifications are sent successfully to all the users. Status is Green(transmitted). But,the issue is that, Some users are getting the notifications and some(Incliding myself) are not.
The users who has mail id say for example [email protected] are getting the notifications within no time but some usres who has maild id like [email protected] are not getting the notifications even after a day.
There are two Nodes are active in the SCOT transaction, One is SMTP and other one is Dummy.
In the address area of the Node SMTP, around 11 users mail ids are maintained, which includes both type mail ids xxxxxxx@xyz and
[email protected]
And the * (star) is maintained in the address area of the Node Dummy.
Can you please give me some clue which can help me in resolving this issue.
Thanks for your time.
Chetan....

Hello Balaji,
Thanks for your inputs.
As i informed that, there are two nodes active in the SCOT transaction. Address area of the NODE A is already set as '*'. So, it was not possible for me to set the start * value in the address area of the NODE B. I dont think its possible to maintain * in Both the NODES.
In the Node A, we have maintained * and in the Node B we have maintained some users mail ids. Because, as this is Quality system we dont want everyone to get the notifications.
Thanks for your inputs.

Special characters in SBWP dynamic columns are not showing for some users

Similar Messages

Maybe you are looking for