Special Considerations about BPC on HANA System Copy
Hello experts,
We will do a system copy for BPC on HANA from DEV to QAS (system installation with system copy method), are there any special considerations about the copy.
Addtionally, can I say that the system copy for BPC and for BW are the same (both follow the system copy guide based on SAP NetWeaver)? Are the follow-up activites the same for both?
Thanks & Best Regards,
Tong Ning
Hi Tong,
If nothing has been changed in DEV after installation then backup & copy should be fine. I was thinking that you want to move custom development that way; recommended way for it is Transport system.
Not sure if this will be faster than just installing everything in QAS.
I'd think that the only follow-up activities would be change of references: to itself and to other systems. If active BW is in same box then it's more to change; if BW only serves as a platform for BPC then it's only SM59 and SPRO.
Regards,
Gersh
Similar Messages
-
BW Powered On HANA - System Copy Process
Dear HANA Gurus,
Now we are on HANA 1.0 SPS03 Rev.21, and we also have a BW 7.3 SP05, running on Windows 2008 64 bit server, on Oracle 11.2.
We want to migrate the BW to HANA DB. Refering to note 1600929 (which is version in revision), the Export method with system copy (using HANA special options) seems fine.
However, not sure how the Import will be done in HANA? We will be creating a new BW on Windows again, and if it is system import it'll again create an Oracle based instance!
When and where it migrates to HANA DB?
Regards
Manish MadhavHello,
HANA conversion is heterogeneous system copy process (DB migration). You will export system on Oracle and then you will import into HANA. Of course you need to have proper CDs.
Here comes important question - did you signed up for SAP rampup? BW on HANA is not yet in Global Availability and only some customers are allowed to participate.
You can find required CDs at this location:
http://service.sap.com/swdc
Software Downloads
Installations and Upgrades
Browse our Download Catalog
SAP NetWeaver and complementary products
SAP NetWeaver BW 7.3 powered by SAP HANA
BW ON HANA INSTALLATION 1.0
Installation
Downloads
If you cannot see these CDs - then you are not part of rampup and you need to wait until Global Availability.
If you can see these CDs - then you need to download them and use them to perform import.
I did not yet have opportunity to perform conversion myself (we still need to prepare our system to meed the requirements) but from SAP guides it is apparent that SAP HANA database is installed on one server (appliance) while ABAP is sitting on second server. (In other words - you should not have ABAP on same server as HANA.)
Also note that only ABAP stack can run on HANA.
And installation guide (here is for Windows):
http://service.sap.com/~sapidb/011000358700001240932011E.pdf
In a standard system, all main instances except the SAP HANA database instance run on a single host.
See system copy guide for details:
http://service.sap.com/~sapidb/011000358700001299452010E.pdf
SAP HANA database is available for SAP NetWeaver 7.3 ABAP only.
Tomas -
Some concern about Live cache Homogeneous System copy
Hi All,
I need to do the Homogeneous system copy SCM 5.0 / Live cache 7.6.00 on AIX. Following are the Source and target System SID for Live cache. Moreover I had check the respective SAP note 457425 and 877203 but still having some concern.
Source System
Live cache SID = SCD
Live cache user ID = SAPSCD
Live Database instant software owner = scdadm
Live cache Data Size = 8 GB ( 4 Data volume / 2 GB each / auto extend off)
Target System
Live cache SID = SCT
Live cache user ID = SAPSCT
Live Database instant software owner = sctadm
Live cache Data Size = 4 GB ( 2 Data volume / 2 GB each / auto extend off)
For same I having following concern.
1. Since there is difference between source system and target system size / data volume number what action I need to take on target system. Do I need to add two more data volume into the target system?
2. After complication of database restore on target the system do I need to change the Live cache user ID (i.e. SAPSCD to SAPSCT)?
or
It is just fine to change the log on data in Integration tab in LC10.
Please let me know some more information on same.
Thanks,
HarshalHello Harshal,
"1. Since there is difference between source system and target system size / data volume number what action I need to take on target system. Do I need to add two more data volume into the target system?"
Please pay attention to the SAP note :: 457425 Homogenous liveCache copy using backup/restore
Please update the thread withy additional information ::
What is the version of the source liveCache? What is the version of the target liveCache?
How much data do you have in the source liveCache?
And you need to have the size data area of the target liveCache to be able to restore the databackup created in the source liveCache.
So by the size of the data volumes in the source liveCache, it's not clear how much data you have.
"2. After complication of database restore on target the system do I need to change the Live cache user ID (i.e. SAPSCD to SAPSCT)?"
Please review the SAP note 877203.
You could rename the user SAPSCD to SAPSCT using the SAP note 877203 steps
OR
You could have the user SAPSCD in the target liveCache as Standard liveCache user &
After you run the homogenous liveCache copy using backup/restore procedure you need
to change the LCA/LDA/LEA connection with user SAPSCD on target system and
set the user SAPSCD to the user containers ( please see the SAP note 616555 for more details )
Before to restart the liveCache in LC10.
PS: Please pay attention about the value of the liveCache parameter _UNICODE.
What are the values of this parameter in the source & target liveCache?
Thank you and best regards, Natalia Khlopina -
Hi,
I have to choose between a copy with or whitout data from PRD system to DEV.
I'm little confused about the difference between System Copy and Client Copy.
Which is that includes a copy of data also?
Then, System copy = Refresh system?
Please, reply me directly, without post link.....
Many thanks.
ClaudiaHi,
Please do an SDN search of these terms.
Also read SAP Note 886102 for all system copies scenarios.
Rgds,
Colum -
How to find old hostname remained in new system after system copy
Hello all,
Let me ask you about changing hostname during system copy.
I've finished homogeneous system copy. I changed its hostname and did not change its SID.
I know we should check and modify RFC destination(SM59), logon group(SMLG), SAPconnect(SCOT), operation mode(SM04) and instance profiles after system copy with changing hostname.
But my customer also used hostname for variant. I overlooked.
Then they require me to provide how to find old hostname in whole system ...
Do you have any good tools or idea? Any advice would be appreciated.
Best regards,
IkueHi,
If u have not deleted the inactive profiles in the tcode RZ10, you can find the old hostname in the instance profile.
Also if u have not deleted the entries in the tables TPFET and TPFHT, u can find the old hostname here in these tables also.
Regards,
Varadharajan M -
SYSTEM COPY/ SYTEM REFRESH
Hi,
Can any one plz explain me the steps to perform System Copy/ Refresh for XI system
Thanks in advance.Hi kobby
Client Copy:
Note that SAP delivers the software with standard clients 000 and 001. You may not work in client 000. However, SAP recommends that you begin R/3 implementation by creating a new client as a copy of client 000.
Transactions used:
SCC4--> To create a client
SCCL-->To do client copy.
Types of Client Copy:
Local client copy between clients in the same R/3 System
Remote client copy between clients in different R/3 Systems
Client transport between clients of different R/3 Systems
System Refresh:
A system refresh is in most cases rebuilding the quality assurance or acceptance system from a backup of the productive system. More accurate test data is made available in the quality assurance system for the developers and customizing consultants to test their ongoing developments and roll-outs.
The specified item was not found.
For system copy and system refresh u can view this link for clarity:
http://www.sap-img.com/bc049.htm
Also,
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci1224022,00.html
This link from SAP Help explains about various kinds of System copy-
http://help.sap.com/saphelp_nw04s/helpdata/en/a2/2f0c173a5e43d19585724239ff4de7/content.htm
hope this will clear you the concepts
regards
sandeep sharma
if helpful kindly reward points -
Error during a system copy with HANA DB
Hello,
I´m doing a system copy in a SAP ERP 6.0 EHP7 with SAP HANA DB.
During a homogeneous system copy procedure with SWPM, it show me the following error during the phase Database refresh postload-activities.
I checked some log files:
-- sapinst.log:
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("S:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
ERROR 2014-08-24 16:14:01.109
MSC-04120 Creating a license signature failed: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
INFO 2014-08-24 16:14:01.234
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.343
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\saplikey.log.
INFO 2014-08-24 16:14:01.390
Switched to user: ASCENDUMCE\ed1adm.
INFO 2014-08-24 16:14:01.422
Output of S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX is written to the logfile saplikey.log.
WARNING 2014-08-24 16:14:01.640
Execution of the command "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX" finished with return code 2. Output:
saplikey: failed to connect to the database.
ERROR 2014-08-24 16:14:01.640
CJS-30023 Process call 'S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX' exits with error code 2. For details see log file(s) saplikey.log, dev_slic.
ERROR 2014-08-24 16:14:01.703
FCO-00011 The step createTempLicense with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DBRefresh_ABAP|ind|ind|ind|ind|abap|0|NW_Temp_License_ABAP|ind|ind|ind|ind|lic|0|createTempLicense was executed with status ERROR ( Last error reported by the step: Creating a license signature failed:
===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .).
INFO 2014-08-24 16:14:02.31
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\__instana_tmp.xml.
INFO 2014-08-24 16:14:02.734
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
INFO 2014-08-24 16:14:02.734
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
-- saplikey.log:
saplikey: failed to connect to the database.
-- dev_likey:
-> init()
STATEMENT_CACHE_SIZE = 1000
-> init()
-> loadClientRuntime()
Loading SQLDBC client runtime ...
SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll
SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510
SQLDBC client runtime is 1.00.80.00.0391861
-> getNewConnection()
<- getNewConnection(con_hdl=0)
-> checkEnvironment(con_hdl=0)
-> connect(con_info_p=0000000000000000)
Try to connect via secure store (DEFAULT) on connection 0 ...
*** ERROR => Connect to database failed, rc=1, rcSQL=10
[dbhdbsql.cpp 332]
SQLCODE : 10
SQLERRTEXT : invalid username or password:
-> SetSdbDbslCA(errcode=10)
-> freeConnection(con_hdl=0)
close all opened locators of connection 0
} DbSlHDBConnect(rc=99)
***LOG BY2=> sql error 10 performing CON [dblink 559]
***LOG BY0=> invalid username or password: [dblink 559]
*** ERROR => saplikey: failed to connect to the database. [saplikey.c 830]
release memory of the SIBU buffers
release memory of the STATEMENT CACHE
Can you help me please!? This is very urgent!
Thank you,
samid raifHello John Appleby,
I ran the R3trans -d and this is the output:
4 ETW000 r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 24.08.2014 - 20:22:19
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Sun Aug 24 20:22:19 2014 124 0.000124
4 ETW000 [ dev trc,00000] db_con_init called 103 0.000227
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
4 ETW000 94 0.000321
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 44 0.000365
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 26 0.000391
4 ETW000 [ dev trc,00000] Loading DB library 'dbhdbslib.dll' ... 64 0.000455
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEEFE00000
4 ETW000 5889 0.006344
4 ETW000 [ dev trc,00000] using "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\dbhdbslib.dll" 35 0.006379
4 ETW000 [ dev trc,00000] Library 'dbhdbslib.dll' loaded 36 0.006415
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll 52 0.006467
4 ETW000 [ dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.43) 111 0.006578
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll 39 0.006617
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll 63 0.006680
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 81 0.006761
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000) 40 0.006801
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006830
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000221F280) 34 0.006864
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 29 0.006893
4 ETW000 [ dev trc,00000] New connection 0 created 25 0.006918
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 63 0.006981
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141FF5E40) 49 0.007030
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 30 0.007060
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 31 0.007091
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 42 0.007133
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 28 0.007161
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 124 0.007285
4 ETW000 [ dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000) 61 0.007346
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 741.10, patch 0.043 (Make PL 0.43) 65 0.007411
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10) 37 0.007448
4 ETW000 [ dev trc,00000] (0.043) R3szchk with partitioned tables (note 2040561) 32 0.007480
4 ETW000 [ dev trc,00000] (0.031) New DBCON syntax for HANA (note 1983389) 50 0.007530
4 ETW000 [ dev trc,00000] (0.028) Bulk insert stop on duplicate, dbsl returncode corrected (note 1996982)
4 ETW000 51 0.007581
4 ETW000 [ dev trc,00000] (0.027) Set DBAREQ class (note 1991383) 35 0.007616
4 ETW000 [ dev trc,00000] (0.022) Get database version via dbsl call (note 1976918) 36 0.007652
4 ETW000 [ dev trc,00000] (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000 53 0.007705
4 ETW000 [ dev trc,00000] (0.020) SQL DDL with data aging (note 1897636) 35 0.007740
4 ETW000 [ dev trc,00000] (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000 52 0.007792
4 ETW000 [ dev trc,00000] (0.014) Tablesize calculation for HANA optimized (note 1952609) 36 0.007828
4 ETW000 [ dev trc,00000] (0.014) Native SQL UPSERT with DataAging (note 1897636) 32 0.007860
4 ETW000 [ dev trc,00000] 22 0.007882
4 ETW000 [ dev trc,00000] -> init() 33 0.007915
4 ETW000 [ dev trc,00000] STATEMENT_CACHE_SIZE = 1000 212 0.008127
4 ETW000 [ dev trc,00000] -> init() 615 0.008742
4 ETW000 [ dev trc,00000] -> loadClientRuntime() 46 0.008788
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ... 31 0.008819
4 ETW000 [ dev trc,00000] SQLDBC Module : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll 1327 0.010146
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510 84 0.010230
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.80.00.0391861 50 0.010280
4 ETW000 [ dev trc,00000] -> getNewConnection() 37 0.010317
4 ETW000 [ dev trc,00000] <- getNewConnection(con_hdl=0) 100 0.010417
4 ETW000 [ dev trc,00000] -> checkEnvironment(con_hdl=0) 53 0.010470
4 ETW000 [ dev trc,00000] -> connect(con_info_p=0000000000000000) 42 0.010512
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ... 86 0.010598
4 ETW000 [dbhdbsql.cpp,00000] *** ERROR => Connect to database failed, rc=1, rcSQL=10 11122 0.021720
4 ETW000 [ dev trc,00000] SQLCODE : 10 68 0.021788
4 ETW000 [ dev trc,00000] SQLERRTEXT : invalid username or password: 40 0.021828
4 ETW000 [ dev trc,00000] -> SetSdbDbslCA(errcode=10) 41 0.021869
4 ETW000 [ dev trc,00000] -> freeConnection(con_hdl=0) 43 0.021912
4 ETW000 [ dev trc,00000] close all opened locators of connection 0 60 0.021972
4 ETW000 [ dev trc,00000] } DbSlHDBConnect(rc=99) 65 0.022037
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 10 performing CON 68 0.022105
4 ETW000 [ dblink ,00000] ***LOG BY0=>invalid username or password: 35 0.022140
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=0000000140541C48) 107 0.022247
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 79 0.022326
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002215998) 38 0.022364
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022392
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002215990) 33 0.022425
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 43 0.022468
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=00000000022159B0) 35 0.022503
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 27 0.022530
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=0000000002215A00) 33 0.022563
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 28 0.022591
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
4 ETW000 [ dev trc,00000] release memory of the SIBU buffers 2900 0.025491
4 ETW000 [ dev trc,00000] release memory of the STATEMENT CACHE 91 0.025582 -
About sap bw system Copy or backup ?(URGENT)
Hi gurus:
Hi friends,I saw many theads about this subject,and I found many documents,But STILL I can't find the way to solve my problem.
It is: How to export the objects I created in develop system to a harddisk, then import it to the QA system . Dev to QA with harddisk NOT online?
And can I backup the whole bw system in the harddisk,and restore the bw system in the qa system istead ? how to backup the bw system ?
All useful reply will assign points
thx
chanHi Zegion,
I think the following may help you:
Purpose: Preserves logical system dependent objects for restoration in case of a system copy issue when a logical source system is deleted or deactivated. BW will auto re-generate a lot, but not these objects.
1. Create on a development system like BWD, because the system is set as a development system in SCC4 and can create and export transports, and will include all objects. A dummy can be used for comparison if the system to be copied is production or test.
a. If creating on another system, like BW test (BWT) or production, you must first open the system in
i. SE06 System Change option modifiable /BIC and /BI0
ii. SCC4 client settings set like in BW Development system (BWD)
iii. STMS in client 000 from BWD (domain controller)
1. Remove BWT from transport path
2. Setup new 2-system path BWT-BW? (BWS or virtual system). This creates a ZOUO transport layer, allowing creation of non-local/not $TMP package transports (see complex sample below)
2. Go to RSA1-Admin workbench, Transport Connection
a. Select Object Types
b. Set for Grouping-Save for system copy
c. Set for Start manual collection
d. Set for Display List
3. Drag and drop source system (select from select objects list and transfer selection) to collection window, example SCEM, SC0CLNT575, DEVCLNT100, SAP_DEMO. I recommend only doing one source system at a time for maximum flexibility and because the R3 sources are very large.
a. Then execute collection Gather dependent objects
b. Select each category (mainly Transfer Rules, Transfer structure and InfoPackages whatever is selected. On each header, right click and select transfer all below
c. Validate that there are no objects in the $TMP development package (DevClass). If it is, select the object and change package button to set to ZAWB. (Anything but $TMP (local))
d. NOTE- To reset transport connection, select anything on the left frame of the screen to refresh
4. You are now ready to transport select the truck icon to create
a. Call it Save for System Copy and the source system name
b. Go to SE09/SE10 and release it and tasks to the OS level
5. Cleanup reset STMS and distribute, reset SCC4 and SE06 on BW0/Source BW system
6. Verify RSA1- Tools mapping of source system names on target BW system (i.e. BWU) for source system of transport (i.e. SC0CLNT575).
7. Verify RSA1- Modeling-Source system connection checks OK on target system
8. Manually import transport in STMS Import Queue, extras, other requests, Add (to buffer). Import single with right click or partially loaded truck icon, select options as below:
9. LAST STEP Validate import logs and activated objects. If there is an error, ensure the link to the new system is active, the RSA1-Tools-Mapping of source system names converts properly from say DEVCLNT100 to TSTCLNT200 (correct frame of reference) and reimport.
if it helpful reward point are appreciated -
How to copy the bookmarks which are created in SAP BW 7.3 to New SAP BW on Hana System?
Hi,
We have requirement of moving the Bookmarks from SAP BW 7.3 system to New SAP BW on Hana System.
Please let me know if it is possible? If possible how to do it.?
Thanks,
tmsHi TMS,
Are you talking about Web template bookmark or QueryDesigner bookmark?
If yes then in both the cases its is stored in your client machine as a browser favourite.This has nothing to do with HANA or BW system.So you can transfer browser favourite file from one system to other.
If you are talking about in anyother context please be precise and more elaborate .
Thanks & Regards
A.Dinesh -
Hello,
I need to do a refresh/system copy of our SAP BO BPC 7.5, I want to do a refresh of our development BPC with the production BPC. What I need to do, I don´t understand!
Can you help me please?
Thank you,
samid raifHello Vadim,
Thank you for your answer. But tell me, this kind of action are not covered in some SAP guides or SAP help? Where is the instructions for this type of procedure?
We have this SAP BO BPC 7.5 installed in windows server and it´s connected to our BW system installed in other server! I installed both some months ago.
I installed the CPMBPC component (release 750) SP level 12 in the BW system and I also installed the SAP BusinessObjects, the Planning and Consolidation Server version for SAP Netweaver as you can see in the images bellow
I need to do a system copy for the BW system (from production to the development system) and also the BPC... I don´t understand this last thing, because... for instance where is the BPC database? I don´t get it!
Kind regards,
samid raif -
SAP BW on HANA Migration for Process , Bex Queries and system Copy
Hi All ,
Can you please let me know the steps for migrating Process chains , BW queries and System copy for BW on HANA .
If you have examples from real time scenarios it would be good .
Thanks in advanceHi,
for Systemcopies see also - SAP First Guidance - BW Housekeeping and BW-PCA
for the overall process - SAP First Guidance - Migration BW on HANA using the DMO option in SUM
Best Regards Roland -
Detail about System Copy / Migration. (URGENT)
Hi! Friends,
I got a new internal project. That is I have to build a new R/3 4.7 (SR1) 1.10 IDES system from the existing one to a new hardware (Server).
Details :
Current : SAP R/3 4.7 (SR1) 1.10 IDES with Kernel 6.20 NU
OS : Windows 2000 AS
DB : Oracle 8.1.7.4.1
Proposed : SAP R/3 4.7 (SR1) 1.10 IDES with Kernel 6.20 NU
OS : Windows 2003 R/2
DB : Oracle 9.2 or 10.2g
I have gone through the sap pdf docs. But still not sure.
My questions are :
1) How to take backup current system data. With conventional db13 or any other way ?
2) After installing CI in new server how to use R/3load to
import the backup data to create DI for new system?
3) Can I use Transport the client-dependent and client-independent data here? If yes, How?
Can you please guide me with detail steps.
Advance Thanks and regards,
PratipHi! Linder,
Thanks very much for U R prompt reply.
1) I am confused. <b>As SAP saying As I understand the process, if you wish to upgrade OS and DB in the same step, you must do a hetrogenous system copy.</b> And U R saying it it a <b>Since this will be a homogeneous copy, no migration key is required.</b>
2) As I donot have Oracle 8.1 CDs so first either I have to install Oracle 9i or 10.2g DB software. In that case your first solution Oracle datafile copy will be vapplicable or not? If yes can U pl. give me the detail procedure?
3) What is the easy option ? using tools like R3load, R3ldctl and R3szchk or using SAP installation disk at the time of DI installation?
4) Can you please explain step by step of the procedure You must first make an export and then do an installation with the created export set instead of the export set from CD.
Waiting for UR reply.
Thanks and regards,
Pratip -
Hom System Copy- Error running J2ee migration tool kit
Good Day Guys,
Im performing homogenous system copy.I have encountered below error:
INFO 2008-10-20 13:05:33
Output of C:\j2sdk1.4.2_18-x64\bin\java.exe -classpath D:/usr/sap/LE1/SYS/global/sltools/sharedlib/launcher .jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport D:/usr/sap/LE1/SYS/global/sltools/jmt;D:/usr/sap/LE1 /SYS/global/sltools/sharedlib import.switch resume downtime mti.properties is written to the logfile C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS/runJmt.log.
WARNING 2008-10-20 13:05:34
Execution of the command "C:\j2sdk1.4.2_18-x64\bin\java.exe -classpath D:/usr/sap/LE1/SYS/global/sltools/sharedlib/launcher .jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport D:/usr/sap/LE1/SYS/global/sltools/jmt;D:/usr/sap/LE1 /SYS/global/sltools/sharedlib import.switch resume downtime mti.properties" finished with return code 27. Output:
ERROR 2008-10-20 13:05:34
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION: See output of logfile C:\Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS//runJmt.log: ''.
ERROR 2008-10-20 13:05:34
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION: See output of logfile C:\Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS//runJmt.log: ''.
ERROR 2008-10-20 13:05:34
FCO-00011 The step RunMigrationController with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_One host_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind |ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|in d| ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind |ind|ind|2|0|RunMigrationController was executed with status ERROR .
INFO 2008-10-20 13:06:29
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_On ehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|in d|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|i nd|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind |ind|ind|ind|2|0|RunMigrationController".
I have checked the runjmt.log its empty.
I did find a note 966752.but couldnt solve the problem.Another thing do we need to have same version of j2sdk,mine are different on source(ia64) and target(x64).
Please advice.
BasisNerdCAn you precise also what Migration tool are you using?
Migration from 5.1 to SAP BPC 7.0 NW?
In that case when you are speaking about the installation about what part are you speaking?
I think actually you are speaking about the migration tool from 4.2 to 7.0 Microsoft version .
In that case you can install the mIgration tool just with SAP BPC sys admin users and you have to input the password for that user. Sys admin user for BPC is usually the user used for installation of SAP BPC server.
Any way I suggest to follow the Migration tool training document and there you will find all the information necessary.
Regards
Sorin Radulescu -
Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA
Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, PolinaHi Manoj, </p>
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ <br>
1) std_server0.out is in the condition before the system copy, no new data was written there. <br>
2)dev_disp <br>
DpJ2eeStart: j2ee state = STARTED<br>
DpJ2eeLogin: j2ee state = CONNECTED<br>
Fri Feb 26 12:58:04 2010<br>
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]<br>
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)<p>
Fri Feb 26 12:58:20 2010<br>
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN<br>
Fri Feb 26 12:57:20 2010<br>
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207]<br>
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214]<br>
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]<p>
It seems that java is trying to start but something goes wrong and it have to shut down<p>
3)dev_bootstrap<br>
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66)<br>
[Thr 1086335296] **********************************************************************<br>
ERROR => The Java VM terminated with a non-zero exit code.<br>
Please see SAP Note 943602 , section 'J2EE Engine exit codes'<br>
for additional information and trouble shooting.<br>
**********************************************************************<br>
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17<br>
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)<p>
4) jvm_bootstrap.out<br>
...<br>
Exception occurred:<br>
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
..<br>
Exception occurred:<br>
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!<br>
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476)<br>
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)<br>
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties!<br>
[Bootstrap module]> Problem occurred while performing synchronization.<p>
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...<p>
Thanks in advance. <br>
Regards, <br>
Polina -
BDLS Conversion after System Copy fails
Hi All,
We are doing a Homogeneous System Copy on a AIX 5.3/Oracle 10.2.0.4/ SAP ERP 6.0 environment.
After the system copy we had to run BDLS to convert logical system names in tables. Except for 3 tables namely EDPP1, TBD05 and TBD06 the BDLS run was successful.
We tried to convert the logical system names in these tables by running BDLS for these tables individually however they failed again.
The error was - "Error in field of table. Manual correction required"
I checked SAP Note 121163 and it is mentioned in this note -
"If the new logical system name already exists in the system, it can cause errors for tables in which the logical system is key field or
unique index (for example, COFIO1). In this case the number of converted entries is smaller than the number of selected entries."
And in this case a manual post-processing is required. How do I go about doing this manual post-processing?
1. Should I maintain these directly at the table level - which is cumbersome as there are a lot of entries?
2. Or using a small ABAP program?
Please let me know if any other information is required frommy side.
Thanks, DibyaHi,
Yes ofcourse, you need to check all settinfs, once you copy teh system you are going loose all RFC's and Source and Destinations ectc, so adject all that settings.
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy
Maybe you are looking for
-
It is a full updated 4s I don't know whats wrong is my phone broken or is my computer broken?
-
Dynamic Tempo Mapping In Audition CC
Hello Adobe, I've seen various forum postings about this in the past, but nothing very recently. I just downloaded the latest version of Audition CC. It looks great, a lot of cool new features, but I wanted to reiterate on past postings that dynami
-
SMTP store Driver: Message submitted to categorizer
Hi, I have Ms Exchange 2003 sp2 running on Windows Server 2003 sp2. It started just today when users ( so far I know of two) send an email to a distribution list in outlook 2007, some of the users in the distribution list receive them, and others don
-
Upgrade Crystal Reports 8 to 2008
hello, do you guys know if there's a tool or a way that guarantees an upgrade path from crystal reports 8 to crystal reports 2008? i have a custom who's interested in upgrading like 150 reports. I was wondering if there are ways or tools to do so an
-
WRT54GS v.6 and Axim wireless connection
Have been battling this with 2 different routers. First was a WRT54G and now the WRT54GS. When I connect wirelessly with my Dell Axim x51v the connection only lasts about 1 minute then degrades down to nothing, but still shows connected. I have lates