Special Economic Zone Customers- ARE-1 form...

Hi gurus,
For a SEZ customer( who is in India), no sales tax, excise duty is foregone and ARE-1 has to be created. Can anybody guide me how to create ARE-1 for Indian customer?
Thanks,
Raja

Refer following SAP wiki link contributed by me for this:
- [ A.R.E 3- Deemed Export |http://wiki.sdn.sap.com/wiki/display/ERPLO/Deemed+Export]
FYI, Special Economic Zone Customers is cater through A.R.E. 3.
Consult & confirm with your client business expert for this.
Regards
JP
As I know & practised:
|- [ FORM A.R.E.-1 |http://www.cbec.gov.in/excise/formidx.htm]|Application for removal of excisable goods for export by air/sea/post/land|
|- [ FORM A.R.E.-3|http://www.cbec.gov.in/excise/formidx.htm]|Application for removal of goods from a factory or a warehouse to another warehouse |
Edited by: Jyoti Prakash on Feb 9, 2012 1:05 PM

Similar Messages

Bill of Exports w.r.t Special Economic Zone (SEZ's sales)

Dear All,
Issue is regarding Bill Of Exports
Scenario applicable to the Customer who belongs to Special Economic Zones (SEZs).
We have two Cases:
1. SEZ sales With Duty Draw Back i.e., Bill of Export of goods claim for duty drawback.
2. SEZ sales Without Duty Draw Back i.e., Bill of Export for dutiable goods.
Duty Draw Back is the Duty (custom duty / Customer excise duty) suffered in INPUTS (imported) material and being refunded if the finished goods is exported.
SEZ sales is considered as EXPORT i.e., Country within a Country where in the transportation is only by means of Road its not through Sea OR Air Say within India but treated as Exports (all the Terms & Condition applicable is same as Exports).
Issue is whether the customer (Indian) should be considered as Exempt Tax (0) in Tax Classification for Customer and run an Export cycle for this scenario.
If anybody have come across this scenario, let me know regarding the same.
Please revert for further clarifications & i/p's will be of great help & rewarded too.
With Regards,
Vijayashree

Hi Devendra,
I am also facing same problem,Please guide me how to resolve it.
If you do not mind Please explain me bill of exchange account payable process I was checked in forms,but i am getting only bill of exchange account receivable process
Please guide me.
Regards,
Narra.

EOU sales from Special Economic Zone...

Hi all,
Our client has an EOU plant in a Special economic zone.
1.Can some explain how the EOU sales take plase from a
SEZ..
2. Where to give the Fileds like a).Country of origin, Country of destination,b). Pre-carriage by, c).Place of receipt by pre-carrier ,d). Port of loading, e).Vessel/Flight .No, f).Port of Discharge g). Place of delivery h). Marks & Nos/ Container no
i). Number &Kind of packaging .

Hi all,
Our client has an EOU plant in a Special economic zone.
1.Can someone explain how the EOU sales take plase from a
SEZ..
2. Where to give the Fileds like a).Country of origin, Country of destination,b). Pre-carriage by, c).Place of receipt by pre-carrier ,d). Port of loading, e).Vessel/Flight .No, f).Port of Discharge g). Place of delivery h). Marks & Nos/ Container no
i). Number &Kind of packaging .

SPECIAL ECONOMIC ZONE

Hi sap peers
I have an urgent requirement from my client side. We are here doing a scrap sales for SEZ project and req is NO Excise ecess and shecess vat should get hit in sales order
it is taxinj procedure i have a defined a new taxcode with nil excise duty and vat
now the prob is when i am saving a sales order it is asking me to maintain j1id details, henceforth i maintained the same
as a result my whole conditon tab got hapahazard as it is now picking taxes
i have copied the previous scrap sales pric procedure in an old sales organisation ans have assigned the same to a new saleorg which is operating under SEZ
My objective is JMOD JCES JA1X should be zero in sales order as well as jin1 and jin6 and only net price should calculate
I HAVENT DEFINED NEW PRIC PROCEDURE FOR THIS SO I HAVENT MADE ANY CHANGES IN THE SCARP SALES PRIC PROCEDURE AS IT WILL EFFECT THE EXISTING PROCESS
ITS VERY URGENTS
FULL MARKS WILL BE AWARDED FOR HELPFUL ANSWER
REGARDS
AMI

Hi........
Ami
In sales order in header -- billing you put alternate tax classification of customer 1 S AND 4 E. Maintain JEX2, JECX AND JA1Y ZERO agaisnt form type BOE.
Please try this and make sales order.
hope this will help u.
thx

SEZ( Special Economic Zone) Business Blue Print.

Dear friends
Presently iam involving in Preparation of Business blue print for one of our SEZ Plant. I am new to sez. can any body send me write up how prepare this bbp related to sez.
Thanks and regards
sitaram

Dear Nirmal,
Blue print is very confidential matter we cant post like forums.
but i am searching for you this is the link i think it is usefull or not i dont know.if you want more search through serch engine
http://russoft.org/docs/?doc=950
Hope this is helps you
Prem

Can you determine which secure zone you are logged into?

Hi all,
Is there a tag that tells you which secure zones you are logged into and display it on the screen. Or even javascript.
Thanks

Thanks Liam.
I kind of worked out the you need to pull out the page id out of the URL and display it that way, but it fails if you have more than one page (you could check across all pages that are part of the secure zone I guess).
Any other ideas would be appreciated.
Anyway thanks again.

How to fetch data in a grid format in a bean area in forms 6i?

Hi,
I need help from all the gurus and experienced persons in forms 6i. I am trying to build form which will have some text fields and a bean area which will display the records that I had entered. Basically following is the basic form structure I am trying to develop
1. There will be a search form which will have two text fields 'Emp ID' and 'Emp Name' and two buttons 'New' and 'Find'.
2. Let there be another form which will have a bean area which will display the following columns in it in the form of a GRID
a. Emp ID
b. Emp Name
This form will also have two text fields 'Emp ID' and 'Emp Name'.
3. When I press 'New' in the search form then the second form should open and it will be blank. I can enter data in the text fields and save the form. The grid area (bean area) should be blank.
4. When I open the search form again and enter the 'Emp Id' I just created in the above step and click the 'Find' button then the next form should open and the 'Emp Id' and the 'Emp Name' text fields should be populated with the data I created in the step 3 and the bean area should also display the record in the form of a grid.
I am ok with all the parts except for the bean area part. Can you help me hpw to develop the form with the bean area and fetch data when searched for and display it in the form of grid?

But still I would like to learn about the Bean being used in the Oracle Forms. I am not familiar with Java at all. So it would be very helpful from your side if you can give me some sample on how to use bean area in forms and fetch records in that in the form of a Grid.You don't need to know anything about Java in order to implement a Java Bean in your form. You simply need to know how Oracle Forms interacts with Java Beans and the When-Custom-Event trigger used to interact with Java Beans.
Francois Degrelle has a great web site (Oracle Forms PJCs/Java Beans) for learning how to use Java in Forms. I recommend you get started here. The biggest hurdle you will encounter is setting up your App Server or your local Forms Builder installation to use Java Beans. For some reason, Oracle has retired many of the documents on OTN that walked you through this setup. However, I can assume that you have access to My Oracle Support (MOS) since you are working with EBS 11.5.9. You should be able to find everything you need in MOS to help you set up your environment.
Craig...

Special depreciation negative in Area 53 ( Derived Area ) , Error AA627

Hello Forum,
I try to post the special depreciation in the transaction ABAA, using the transaction type 620 ( transaction type group 62).
I get the error: AA627, Special depreciation negative in area 53
Could anybody help me resolving this?
Thanks
Best Regards
D. Swathi

HI
Explanation using an example:
Period              Transaction        Amount in EUR     Exch Rate Vs USD     Amount in USD
February 2008     Acquisition     100              1.4                        140
February 2008     Depreciation     -10              1.4                        -14
March 2008     Depreciation     -10              1.5                         -15
As at 31.03.08     NBV     80                   111
April 2008     Write-up     20     1.6     -29
As you see, when we are doing manual depreciation the entire depreciation which is posted for this asset, we would be entering the value as 20 EUR which would convert automatically to 32 USD at the prevailing rate (20*1.6). But the amount in USD should only be 29 because thatu2019s the amount that has actually been posted as ordinary accumulated depreciation. If we donu2019t manually enter 29 USD, then the ordinary accumulated depreciation would be calculated as -3 (29-32) which is what the system is showing as an error.
If you have any query pl let me know.
Thanks & Regards,
Venkataraju Khottari

Whats are the Forms and Reports in QM?and what is differece betwwen them?

whats are the Forms and Reports in QM?and what is differece betwwen them?

Hi,
1. Forms are like templates.Forms define the text format and page layout of documents, which can be formatted (in accordance with the definitions) for display on the screen or for output to a printer.
2. Executable program that allows users to read and evaluate data in the database.
You can either display the output of a report on the screen or send it to a printer. You can also save it, so that it can be displayed as often as you like. It is important to be able to do this, because reading large volumes of original data can impair performance.
Examples of reports are ABAP reports, queries, and drilldown reports.
In short, forms are only templates and reports will retrive the data from system in certain format.
Vishal

Can anyone tell me how i get to speak to someone in customer service? they are retiring Forms Cental and i really need to speak to someone about the renewl of my subscription. THe live chat has been unavailable for two weeks and there is no other option t

Can anyone tell me how i get to speak to someone in customer service? they are retiring Forms Cental and i really need to speak to someone about the renewl of my subscription. THe live chat has been unavailable for two weeks and there is no other option to get in touch with these people. Any ideas anyone?

Hi SwarovskiUK,
I'm sorry to hear that you've been having trouble contacting Customer Care. Live Chat is certainly available--are you not seeing the chat option on the Contact Customer Care page? Or are just not able to get through?
In any case, I should be able to help you myself. What can I do for you?
Best,
Sara

How can find what are the customers are created in my earlier version.

Hi all,I am trying to find out how can I check the what are the customers are created in my earlier version of sap (i.e 4.7B)
My client Upgrade d the 5.0 in 2007. Now my client asking, list of WDs which are created in the 4.7B.

Hi,
You know when the SAP went live with the new version.
In t.code SE16, enter table name KNA1.
In the field created on put value of new SAP version go-live date and select a < symbol by double clicking the field. Then click on execute button, the system will provide the customer master created before the new version go-live date.
Regards,

ARE-3 n ARE-1 form

Hi All
What is the difference between ARE-1,ARE-3 and CT3 form and how to create it?
What other documents are there for export and how to create it?
Reward Points for helpful answer
Regards
Ashis

Hi...
ARE3 - it is form for deemed exports and to be iised along with consignment, which is billed without excise duty. and to issue it u need a CT3
like for a deemed export customer .... u first take order and he says it is W/O Excise duty since he can do a deemed exports .. then u nned to ssue a proforma invoice to him and then against this he will issue a CT-3 form from his excsie range ... once u get this Ct-3 u can now issue or deliver the material without excise duty and ARE-3 form from yr premise after inspection by excise officals and then consignment is sent to his place .. once he receives the goods he will call his excise officials and they will warehouse the material and sign the ARE3 which is called as bonding of material.... now u will get the signed ARE3 back and can submit it at your excise range for having prrof that u gave done a deemed exports and not pay the Excise duty on this consignment.
ARE1 : If u r doing exports to some other country , u need to use the ARE1 from .. i.e isse ARE1 after inspection from your excise officals and then it goes to customs and they would fill it and send it back with comments i.e any shortage found etc ... now yuor exise range will stamp and settle this ARE1.
If u r having excsie exemt because of bond or other means that should aaso be recorded.
For exports u need Bill of LAding if Ship transport, Commerical Bill, Tech specs of material being sent, aging report of liner, etc
Reward if useful
Krishna

ARE-1 form Printing

Hi All,
My query is regarding to take the print of ARE-1 form after creating ARE-1 doucment via TC: J1IA101. I can take the print only while creating ARE-1. But if I want to take the same print via TC: J1IA101 in Display mode, the print option is not there to take.
In this case how should I take print after creating ARE-1 document. I tried in J1IP also but no sucess.
Please help me to take the print of ARE-1 in display/change mode.
Regards,
Vijay

Hi
In J1IA101 select the display mode ARE1 number or Internal number and press enter.
On the application tool bar there is PRINTER icon click on that and in the following screen select your output device.
regards
SAP SD

I have many pdfs that have the identical structure, but are NOT forms. How can I collect this data?

I have dozens of pdfs which have the identical structure, but are NOT forms. I would like to collect data across these pdfs to analyze. Is there a way to do this?

There are a number of ways that text can be extracted, but it may not be in the order that you'd expect or want. But if it's consistent in any case, you should be able to get at the content you're interested in. JavaScript can be used to loop through the "words" on a page, for example. I've used this approach for several projects that required data extraction.

WHAT ARE THE FORMS (SCRIPTS) WHICH ARE NOT PROVIDED BY STANDARD SAP?

WHAT ARE THE FORMS (SCRIPTS) WHICH ARE NOT PROVIDED BY STANDARD SAP?

Hi Pravin
For a beginner in CRM - Sales would be a right choice to understand how CRM behaves when integrated with backend R/3.
Still as far as CRM goes, most of the components are not exposed to their fullest potential and that is why its not outshining the competitors in market.

Special Economic Zone Customers- ARE-1 form...

Similar Messages

Maybe you are looking for