Special effect audio Filters

I am looking for some special effects audio filters, ie. convert a recorded voice into a computer synthesised voice.
Any recommendations would be appreciated.
Regards

You can do it in Soundtrack Pro if you have that.
rh

Similar Messages

Lost special effects sounds from video and no sounds available to reload.

the special effect audio is no longer available to insert into the video.
one of the special effects audio I inserted is no longer playing.

Try doing a reset on the iPhone,
Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Audio Filters for filtering out noise

Hi all! I'm fresh on FCE and doing pretty well thanks to these forums. I've found answers to most of my issues except this one. I have a video clip with a soft spoken person and air conditioning background noise. I've tried numerous filters and settings, but, I have NO experience with audio settings. Where would you suggest I start as far as a filter to use, and what settings to tweak? I was also going to use the "Gain" filter to boost her volume after I filter out the A/C. Thanks!!!!

Try Effects>Audio Filters>3 Band Equalizer.
This tutorial may assist:
http://www.kenstone.net/fcphomepage/basic_audio_filtertutoria.html
A third party appliczatin like Sound Soap could be a better solution than FCE filters. Try a trial on your clip.
http://www.bias-inc.com/products/soundSoapPro/
Al

Audio special effects in Pr12

I'm back! I want to add the "reverb" audio special effect to an audio clip I have. [using Premiere Elements 12 on a WinPro7 computer]. This is what I've done:
click on the audio clip
open special effects and open audio special effects
click on 'reverb' (the outline is now blue) and drag the reverb box onto the audio clip.
The effect is on/in the clip (can check it with 'adjust special effects'), BUT when the clip is played, there is a ratcheting noise. I have tried the "delay" effect as a diagnostic tool, and it added just fine. It's just not the effect I want.
Ideas any one?
Thank you.
retchemteach

Hello,
I'm sorry to have waited so long to reply. I guess the holidays got in the way....and, football. And, now I have 3 topics.
ONE
I tried MANY things about the REVERB effect with no success....either (1) I could not hear that the reverb was working (and, I've used it before in Pr4 and could tell a difference) or (2) that ratcheting noise was still there.
The main thing I did was create new (test) Pr12 files with only the audio that was the problem or with other audios [i.e. songs 'ripped' from purchased CDs, purchased songs from iTunes (either MP3 or WAV formats), sound effects I have from many various sources, including the ones that come with Pr12]. No help. Soooo, if I MUST have reverb on an audio clip, I think I'll just use my XP machine and its Pr4 and then export that audio clip to use in the Pr12 file...if that works, and I think it would. Thank you for that help.
TWO
To continue a thread we had about file size and DVD disc capacity.....I have included 2 screen shots....the first one is to show the file size I just burned on a 4.7 GB DVD.
You can see that the file is 5.587 GB.
Now, here is what the screen showed me in Pr12 when I was preparing to burn the disc.....notice that the "fit contents" box is UNchecked, and I slid the button to the right for HIGHEST quality. Notice it says "space required" is 1.64 GB. This is what I was trying to get across when several of us were discussing "file size" vs disc capacity. Does this mean I can put more on a given disc? That would be cool if I could.
THREE
And, last but not least, is there a way to reduce the volume of the MENU volume if it comes with its own audio? I am using "Outdoor Adventure", and its volume is INTENSE versus what I have mixed in the file. I have looked in my Pr manual, but it doesn't say much. I guess I should first look in the forum for the answer to this, but I'm spoiled with your terrific help.
Have a good day, and thank you.
retchemteach

Where can I get more filters, transitions and special effects for FC?

I thought I heard that there is a third party company that has transitions and cool effects and filters I could use with final cut express. Does anyone know who they are, and if they are creditable?
THANKS!

Oh no I don't have a problem with free and I don't think expensive things means it's better. It's just easier to install a couple discs of software then to go through a bunch of sites and sift through all the free ones. I used to use iMovie and GeeThree made it easy with all their discs. That's why I am looking for software. Plus if anything ever happens to my computer it wouldn't take any time at all to reinstall the CD then to go through and find everything again. Thank you again for your suggestions.

Tips On Using Audio Filters To Good Effect

Im working on a documentary at the moment, and 98 percent of the time, my sound is great. Unfortunately, I had a great interview that was conducted in a place that was a bit noisy ( background street sounds, cars, etc...)
In the past, I've been able to get some good tips and tutorials on cleaning up the sound utilizing the filters in FCP. Any help or maybe a link to a good site that shows a bit of 'how-to' would be great.
YES, I know I need to watch how I record my sound!
Message was edited by: mybethesdasea

Okay well I have to recommend the great Ken Stone for his audio filters tutorial
http://www.kenstone.net/fcphomepage/basic_audio_filtertutoria.html
And also Audacity has a cool little feature for extracting very specific noises. You can read up on it here:
http://www.podtopia.net/gettingstarted/removenoise.shtml
Audacity is a free download you can get here

New Media Encoder Error: video and/or audio filters are missing...

My colleague reported this error popup window while using Adobe Media Encoder CC (up-to-date):
"video and/or audio filters are missing and the rendered output may not match the original"
I've been seeing similar errors the past few days. I can't remember if the wording was the same in the errors I saw, but the circumstances were the same.
I've never seen this popup error before the most recent CC update.
Some background info:
I queued up multiple Premiere Pro pproj files as usual from within Premiere
without rebooting or deleting any cache or temp files or anything, I start the queue
I have no special plugins installed in Premiere. Vanilla CC install.
Windows 7, 64-bit
This error doesn't tell me what audio/video filter(s) are missing. The output files, once I dismiss this warning, are perfect.
The major problem: It stops the queue dead in it's tracks. Sure, it might seem handy to stop and give you a warning, but when it's a false report and there's nothing wrong, it's killing us, because we queue up multiple files for encoding overnight, and we're not here to get the popups.
What is likely causing this? Is it a bug that this is appearing so frequently? Has anyone else experienced this besides my colleague and I?
Thanks!

Update for anyone experiencing this issue:
We are still investigating the cause of the issue and would really like your help tracking it down. If you run in to it I would be happy to jump on the phone with you and preferably do a screenshare as well. If you want to run some tests for me, this is what may help us track it down:
0. Please make sure you are updated to the latest version of Premiere Pro and AME, which at this time are Premiere Pro 7.2.1 and AME 7.2.
1. Simplify the project. Create a copy of the project and eliminate anything in the project that isn't related to the sequence(s) you are exporting. Then run the encode again. If it still occurs, move to the next step. If it doesn't occur any more, repeat step one and only remove half of the unused items (sorry, this is giong to be a manual process). Rinse, repeat.
2. Open your sequence in Premiere and press Cmd/Ctrl + A to select all clips in your sequence. Right click and select Remove All Effects. Export again. No repro? Go to step 4. If it still repros, go to step 4.
3. Make all the media offline. Export again. No repro? Go to step 4. Repro? Go to step 5.
4. Send me a message with as much detail as possible. Even better would be if you could provide me a copy of your project file.
Your help in tracking this issue down is greatly appreciated. Thank you.

I AM NO LONGER ABLE TO ADD SPECIAL EFFECTS TO MY MOVIES

Hi i am making a video using a green screen. I used to be able to double click my video on the project bin and choose a special effect such as romantic or black and white. Now i can no longer do this. It brings up video stabalization, audio and video where you can change the color and contrast but no special effects. I have tried both on project bin and importing. I can add special effects to text but not video. Could this be because of green screen effect or length of video?? This is before and after adding a background for the green screen. I am sorry if this has been asked before. I couldn't find anything on this.

Quit the Videos app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work - try this. Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and it should start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

Video / Audio Filters not showing up in "Viewer" tab?

Hi, I recently re-installed Final Cut Express v4.0.1 after a hard drive crash. Now the video and audio filters do not show up on the Viewer Screen. They show up on the "Effects" menu tab (though video transitions do not). I've attempted uninstall / reinstall and deleting preferences but still no luck. Any suggestions? Thanks!

You may not have deleted the dodgy app fully as there are numerous hidden folders.
Use this free app:-
http://www.digitalrebellion.com/fcsremover/
Make sure only FCE is selected and click the Remove Selected button at the bottom.

Special effects editing question for iMovie '09

Hi,
I understand that iMovie '09 doesn't support many (any?) add-on software packages for special effects editing.
Meanwhile, I'm editing some sports clips in iMovie '09,, in which I'd love to have a "spotlight" on a player, (where the other action/background is dimmed), or use an arrow to point at a player---that sort of thing.
Is there a way to---say, do this edit in iMovie HD, or iMovie '06, with special software, then re-import it back into my iMovie '09 project?

Ziatron,
Thanks for your reply. When you say you use iMovie '06 with iDVD 09 all the time---can you explain further? I guess I go back to my original question---Would iMovie '09 "accept" the edit done in iMovie HD or iMovie '06?
I do like the organizing layout (boxes with titles) much better on the previous versions, as well as some more detailed audio editing---but I'm grudgingly moved on to iMovie 09, and have already loaded a lot of my material (and keyworded them) into iMovie 09. I think I'm going to stick it out with this project.
Thanks in advance for any further advice you can share.
TJ

After Effects Audio Output Causes Render To Hang Then "Output Module Failed"

So I have been working on this video for a few weeks now, no special effects just 3D layers and text.
I had set it to render Thursday afternoon and it finished Friday night after I left work.
So today I came into work played the video and I realized I didn't render the audio. (NICE!)
So I reset the render que (didnt change anything but render audio settings) and the render
doesn't even start, it just stays at "Stage: Compressing and Writing" for a few minutes then gives me
the good ole' output module has failed.
Ive already restarted AE, and my comp, I also purged the memory.
Im running windows 7 (64 bit) with 8gb RAM and Intel Core i7-3770S CPU @ 3.10ghz
It is definitely the audio output, I tried rendering without it and it started up just fine.
Any help is greatly appreciated.

just updated to 11.0.2 and still nothing
I click Render and it just says rendering but nothing changes
not even time elapsed or est. remaining
just stays on compressing and writing and my ram used doesnt even start going up

URGENT AUDIO HELP NEEDED!! Suitable audio filters

I'm in desperate need of knowing what audio filters are good to reduce background noise for a film I'm making. I've got a basic DV camera that picked up a lot of wind the other day and I am trying to minimise the background noise so that I can pick up what people were saying.
Does anyone know what audio filters on Final Cut Express are suitable for doing this?
Cheers

I have never found a way to filter out wind noise, and I don't think it is practicable. I think that the problem is that the frequency in wind noise is similar to the frequencies in most video audio, so you can't filter out the wind noise without damaging the rest of the audio.
The only solution seems to be to shoot on a windless day, or use a very directional mike, and/or have a wind sock that is effective. (Unless soemone else knows a way.)

Audio Filters Not Loading - CS6 Mac

I've encountered a strange problem that I hadn't seen in previous versions of PPro.
I had applied a number of audio filters in a recent project. While in the process of doing this, the program crashed. When I re-opened the project, I received the message:
"Audio Filter missing: 1094998321 Dynamics1
Audio Filter missing: 1095915057 Reverb1"
and so on, for any audio filter applied.
Clicked "OK" and the project continued opening, however the effects panel for all audio clips with filters applied now read "Offline (filter unavailable)"
Strange. Deleted then reapplied the filter. Played back correctly. Closed the program, reopened, and the filter is once again "offline".
I tried a few workarounds:
1. "replace and render" the audio clips. This froze the program and I had to force quit
2. exporting clips to Audition. This also locked up the program
3. apply filters then render final audio file in Adobe Encoder. Audio file rendered, but filters weren't applied.
Very strange and frustrating. Any ideas on the cause of this or possible solutions?
2008 Mac Pro 3,1 (2 x Xeon 2.8 GHz processors)
16 GB RAM
GTX 285 video card
Project files and media cache on separate drive from program

I have experienced this problem several times with Premiere Pro CS6 and PluralEyes 3.0 for Windows.
The problem is simple: when you apply an audio effect to a track that was synced by PluralEyes, Premiere Pro gets confused about whether the track is mono or stereo. Premiere Pro applies the effect properly, but when it saves this effect in its project file, it writes the incorrect filter name.
Then when you restart Premiere Pro, it reads the project file, extracts the incorrect filter name, and complains about the "missing" filter.
The solution is simple: just edit the Premiere Pro project file (which is in XML format) to contain the correct filter name. For example, when I added the Lowpass and Bass effects to a PluralEyes audio track, Premiere Pro wrote these to the project file:
<FilterMatchName>Internal Lowpass Mono</FilterMatchName>
<FilterMatchName>Internal Bass Mono</FilterMatchName>
When I changed those from "Mono" to Stereo with a text editor, then reloaded Premiere Pro, it solved my problem:
<FilterMatchName>Internal Lowpass Stereo</FilterMatchName>
<FilterMatchName>Internal Bass Stereo</FilterMatchName>
The trick, of course, was in discovering the correct names for these effects. To do that, I:
Created a new Premiere Pro CS6 project
Imported the audio track in question
Dropped it into a sequence
Applied the audio effect(s) in question
Saved the project
Opened the Premiere Pro project file (which ends in ".prproj") in a text editor
Searched for the effect name (e.g., 'Lowpass" or "Bass")
The filter names are not always this predictible; for example, when Premiere Pro wrote "<FilterMatchName>1095782705 EQ1</FilterMatchName>", it really meant "<FilterMatchName>1095782706 EQ2</FilterMatchName>". And when it wrote "<FilterMatchName>1094998321 Dynamics1</FilterMatchName>", it really meant "<FilterMatchName>1094998322 Dynamics2</FilterMatchName>".

IMovie '08 special effects

Are there any special effects in iMovie '08 from iLife '08?

Are there any special effects in iMovie '08 from iLife '08?
Only the ones built into the application (i.e., titles, transitions, QT filters, etc.) at this time. Edit in iMovie HD if special effects are required or learn how create your own effects for use in iMovie '08.

Special effects software to complement imovie

Anyone know of affordable special effects software that is easy to use. Blender has been frustrating. I am looking to add special effects to my movies and then format them in imovie. Thanks in advance for any suggestions.

Ziatron,
Thanks for your reply. When you say you use iMovie '06 with iDVD 09 all the time---can you explain further? I guess I go back to my original question---Would iMovie '09 "accept" the edit done in iMovie HD or iMovie '06?
I do like the organizing layout (boxes with titles) much better on the previous versions, as well as some more detailed audio editing---but I'm grudgingly moved on to iMovie 09, and have already loaded a lot of my material (and keyworded them) into iMovie 09. I think I'm going to stick it out with this project.
Thanks in advance for any further advice you can share.
TJ

Special effect audio Filters

Similar Messages

Maybe you are looking for