Special Reserve : transaction code AO99
Hi all,
do you know how to do to add a depreciation area for account determination "special reserves"?
Table SAP = T095P.
Thanks a lot for your assistance.
have a look here http://help.sap.com/erp2005_ehp_03/helpdata/EN/4f/71dc14448011d189f00000e81ddfac/frameset.htm
A.
Similar Messages
-
Any Special transaction code for Activation of Work flow
Hi all.
Any Special transaction code for Activation and deactive of Work flow?
which have we need to transport after WF (like task,method,rule)?
To be reward all helpfull answers.
Regards.
JayIf I understand your question correctly, you want to know how to activate your workflow after transport ?
Normally, the status of a workflow is included in your transport (if I'm not mistaken)
So activate/deactivate in your dev-system and transport it.. -
Asking Special Reserve account while posting ASKB program
Hi All,
Can any one help me how to resolve the error message.
I have created assets in Leading & Local Ledger with different APC values.
When i am trying to post the ASKB ecountering an error stating that "Account 'Special reserves balance' could not be found for area 34".
Diagnosis
When creating the accounting document, the system could not find account 'Special reserves balance' in depreciation area 34 for company code 3575.
I have udpated the Dummy GL account and try to post the ASKB but still i got the same error.
BalajiPlease read the question thoroughly, answer has been given in the question.
Please check whether your account determination for special reserve is missing in AO90 transaction code. -
Account 'Special reserves balance' could not be found for area 03
Hi Experts,
I had an error message from fixed asset depreciation transaction (AFAB) like below.
Account 'Special reserves balance' could not be found for area 03
Message no. AU133
Our depreciation areas are like following.
1 : Book Area
2 : Tax Area
3 : Book Area - Tax Area
51 : Investment Support Area
The depreciation area information is like above, then I got an above error message.
Please tell me where I have to assign above account at AO90 transaction.
Thanks.
BR,
Chris KimHello Julie,
Thanks for your reply.
The depreciation area "03" is a derived area.
I think the issue has been solved.
Thanks again.
BR,
Chris -
Transaction code for Custom report
Hi,
How to create transaction code for Custom report ?
the custom report is a drilldown report of COPA, which can seen in tcode FDI3.
then how to add this new transaction to the menu path Easy assess->FI->AR->Information system->Reports->customers:items.
Thanks,
SwethaHi Swetha,
There is a special way to assign tcodes to such reports. Normally you create the report via report painter/writer. These reports are part of library and report group.
Create the tcode in SE93. Then at the bottom of the screen you would find option to specify report group, report name, variant to lauch with. Don't have system to specify the exact way of specifying, if you need I can provide on monday. You can take some existing COPA standard report and check from SE93.
--Ram -
User exit for transaction code MIGO (Goods Receipt)
Hi Team,
Please let me know the <b>name of the user exit</b> for adding a new field in transaction code <b>MIGO</b> (The field is Freight charges ) at header level.
Would be suitably rewarded.
Regards
Badarihi,
Transaction Code - MIGO Goods movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
Cheers
Alfred -
OBXR- Special GL Transaction Types - Modify Fields
Hello Gurus. We are on ECC 6.0 with New GL. Is there a way to modify which fields are available for the Special GL Transaction types in OBXR ? For example: In OBXR go to Properties. We selected Down Payment/Down payment request, later on when we enter a document via FB01 or FB50 or when we post a payment via F-28, and we select Posting Key 09 or 19 and use the Special GL Indicator we are able to display and enter information in BSEG-PRCTR (Profit Center field).
If on the other hand in OBXR we set up another Special GL Transaction type and we select Others, then BSEG-PRCTR (profit center field) is not even available, but we are able to enter BSEG-ZFBDT and later on modify this same field (BSEG-ZFBDT) via FB02.
I would greatly appreciate your guidance in how to modify/include additional fields in these Special GL Transaction types. Thanks!Hi Enrique,
Are you referring to the document screen layout when you enter the document in the special GL transactions?
This is controlled by the field status of the posting key in question. Using transaction code OB41you can double click on the posting key (say 09) and inside you find something called as maintain field status. Clicking on the same, you will be able to see various groups under which you can make the necessary settings like optional/reqd/suppressed.
Thanks
Aravind -
Set Default value for transaction code F-36
Hi
I need to set default value to feild special G/L indicator in transaction code F-36 How can I do that. Please advice.
Regards
KesharikaJust in case anyone would need to know. You can change the default values for transactions by using SE93.
Regards, -
Navigation for database tables in a transaction code
Hi all !
Is there any way to know the database tables linked to a transaction code, so that searching for fields in tables gets easier right?Please help.
What is the use of Tcode SE80.How can we make use of this transaction?hi,
SE80 - Object Navigator
se80 is a tool to develope and navigate programs and dd-obj.
SE80 Object Navigator - > means all the objects qill be available there.
in se80 in addition to viewing the objects related to programming and classess, there are more priviliges to view such as some other repositories suchas mime, object repository,object browser and all..
The 2 editors are se38 and se80 both have the abap editor in place. In se38 you can go create programs and view online reports and basically do all thedevelopmet of objects in this editor. In se80 ( object navigator) there are additional features such as creating packages,module pool , function group ,classes, programs ( where you can create ur programs) and BSP applications .
SE38, u will get more space in editor when u compare with the SE80 screen, the tree structure available will occupy more space so it will be eay for us to code.
If u want to do any special navigation then u can got to SE80, but there is no specific reason.
It depends on teh users convineince.
se80 is to navigate to every object .....
but everytime there is no need to navigate to several steps and go to abap editor.
So there certain transactions which takes us to directly to the objects such as SE38 for abapaeditor
SE37 for function module
SE93 for creating transaction codes...etc.
U can also traverse to se80 from SE38 itself using CtrlShiftF5.
SE 38 ->Abap Editor thru which we can create/modify the programs.
SE80 ->Object Navigator thru which we can navigate to many areas like message classes,Function modules,application areas,transactions, programs etc. -
To add feild in standard transaction code
hi
can anyone guide me to add one field t074u-UMSKZ( special G/L indicator) in standard transaction code FBCJ
under CASH PAYMENT tab ?.
regards
rajdeepYou have to update the structure ISCJ_E_POSTINGS (to inser the new field) and then dynpro SAPMFCJ00110 by screen painter (SE51)...both objects are standard so you have to get the keys to update them from OSS.
Perhaps you should update the code to get the information and put it in your new field
Message was edited by: max bianchi -
Search For an IView with the transaction code
Hello,
i'm trying to find out which IView in the portal is calling a special backend transaction.
I only got the transaction name ("Transaction Code" in the IView definition).
How could I know which Iview is doing thiis ?
Thanks in advance for your precious help
SMFHello Arun,
i already tried to search by the Portal Content / Search tab, but it doesn't help, and just looks through name, description and ID of the objects.
There might be another way (even if it's a coding one) to do this no ?
Thanks again for your answer.
Regards
SMF -
Need all transaction codes related to SD and MM
hi
i am in need of need all transaction codes related to SD and MM.
can anyone help me to get it.
thanks in advance.Hi,
The most frequently used transaction codes are as follows:
1. VS00 - Master data
2. VC00 - Sales Support
3. VA00 - Sales
4. VL00 - Shipping
5. VT00 - Transportation
6. VF00 - Billing
Others as follows:
At Configuration:
1. VOV8 - Define Sales documents type (header)
2. OVAZ - Assigning Sales area to sales documents type
3. OVAU - Order reasons
4. VOV4 - Assign Item categoreies(Item cat determination)
5. VOV6 - Scedule line categories
6. OVAL - To assign blocks to relevant sales documents type
7. OVLK - Define delivery types
8. V/06 - Pricing
9. V/08 - Maintain pricing procedure
10.OVKP - Pricing proc determination
11.V/07 - Access sequence
Enduser:
1. Customer Master Creation-VD01 and XD01 (for full inclu company code)
VD02 - Change Customer
VD03 - Display Customer
VD04 - Customer Account Changes
VD06 - Flag for Deletion Customer
XD01 - Create Customer
XD02 - Modify Customer
XD03 - Display Customer
2. Create Other material -
MM00
3. VB11- To create material determination condition record
4. CO09- Material availability Overview
5. VL01 - Create outbound delivery with ref sales order
6. VL04 - Collective processing of delivery
7. VA11 - Create Inquiry
VA12 - Change Inquiry
VA13 - Display Inquiry
Sales & Distribution
Sales order / Quote / Sched Agreement / Contract
· VA01 - Create Order
· VA02 - Change Order
· VA03 - Display Order
· VA02 - Sales order change
· VA05 - List of sales orders
· VA32 - Scheduling agreement change
· VA42 - Contract change
· VA21 - Create Quotation
· VA22 - Change Quotation
· VA23 - Display Quotation
Billing
· VF02 - Change billing document
· VF11 - Cancel Billing document
· VF04 - Billing due list
· FBL5N - Display Customer invoices by line
· FBL1N - Display Vendor invoices by line
Delivery
· VL02N - Change delivery document
· VL04 - Delivery due list
· VKM5 - List of deliveries
· VL06G - List of outbound deliveries for goods issue
· VL06P - List of outbound deliveries for picking
· VL09 - Cancel goods issue
· VT02N - Change shipment
· VT70 - Output for shipments
General
· VKM3, VKM4 - List of sales documents
· VKM1 - List of blocked SD documents
· VD52 - Material Determination
MM Transaction Code
All transaction are stored in table TSTC.
Transaction for MM module start with M.
IH09 - Display Material
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
CT01 - Create Characteristic
CT02 - Change Characteristic
CT03 - Display Characteristic
CL01 - Create Class
CL02 - Classes
CL03 - Display Class
CL04 - Delete Class
CL2B - Class Types
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 12:53 PM -
How can i log transaction codes, programes and tables used by a user?
Hi everyone,
i need to log transaction codes, programes and tables a user has used in a certain time. how can i trace that and is it possible with timestamps?
i tried something with the badi workload_statistic but thats not what i need. is there a simple function which can do that or is this really much more complicated?In SE13 there is an option to log table changes for a table.
If you search for "SCU3" you will find plenty of information on this. Also search for "RECCLIENT" (without the "/") and you will find some more specialized threads.
Cheers,
Julius -
Hi Gurus,
Is there a transaction code which shows what kind of Material we ordered in a special time frame
and it also shows the customer?!
Many Thanks
KumarHi Gregory,
Thank You for the reply.
I would like to see the material type, material group, the sold to party and ship to party within a special time frame.
Regards
Kumar -
Diffrent Between Goods Receipt Transaction Code MB01 and MIGO?
Dear All
Could anyone please tell me different between goods receipt by MB01 and MIGO.
Should I choose MIGO or MB01.
Thank and Best Regards,
ThangHi,
It is better to use MIGO.
MIGO replaces all the conventional transactions for posting goods movements, whose transaction codes start with MB*.
You can use the transaction (MIGO) to post the following goods movements:
- Goods receipts from external procurement
- Goods receipts for orders
- 'Other' goods receipts
- Return deliveries and subsequent deliveries
- Goods issues
- Transfer postings and stock transfers
- Subsequent adjustment for subcontracting
The advantages this transaction brings
This transaction provides many advantages over the old transaction for posting goods movements, for example:
- You can maintain and display all the data on one screen. You can find all the information you need for an item without having to switch from screen to screen. You can just hide any detailed information you do not require.
- When you enter goods movements, the system does not issue any messages; before you post the goods movements, you can display all the messages at once.
- Instead of having to enter the same data every time you enter a new goods movement (for example, plant, storage location, or movement type), you enter the data you use most often only once via Settings -> Default values. The system then proposes this data every time you enter a goods movement.
- If you do not know the exact name of the material, plant, or storage location, you just enter part of the number or a description. The system then searches for and proposes the complete term for you.
How the screen is structured
The screen is split into three areas:
- Overview tree
You can show and hide this area via the Overview on/off pushbutton. The overview screen displays the last ten documents for orders, reservations, material documents or held data. You thereby always have an overview of the last activities you carried out.
- Header data
You can show and hide this area via the Open/close header data pushbutton.
- Detail data
You can show this area by clicking on the item for which you want to display detail data in the Line column of the item overview. You can hide the detail data again by choosing Close detail data.
Each time you call up the transaction, the screen is displayed as it was configured the last time you used it.
Maybe you are looking for
-
downloaded beta v 4, worked for a while then stopped. When i start firefox, it starts in task manager with some cpu, then cpu goes to zero. Firefox never actually opens. Can not open profile manager either. Tried uninstalling, reinstalling, uninstall
-
As captioned, I installed Lion first and then set up the win7 with bootcamp. At the beginning, the defualt system is Win7, I changed as the Lion as the default system in system reference setting. The procedure as follows: 1. Click the system referenc
-
Error when trying to log into iTunes account.
When I go into iTunes from my laptop to update apps that I have, it prompts me to put in my password. When I put in my password, it tells me there's an unknown error and to put it in again. When I did, it tells me that my password has be put in to ma
-
Query Regarding File to IDOC Scenario (1:2)
Hi, I am working on a scenario like One File to Two IDOC's . In file we are getting some business functions (It's One feild in source file) , Some Business functions I need to map with One IDOC and some with other Idoc. So I need to route a file cont
-
Connection to multiple databases using a single EJB
How can I connect to multiple Databases (using @PersistenceContext) using an EJB? Did I need to connect various Entity Managers corresponding to the each database and simply send my Queries? I am using Glassfish Application Server Netbeans IDE Java D