Special rules in OP03 not taking into effect in cm25

how shall the special rules added in the factory calendar take effect in the CM25 (Planning board). i;ve added some days on weekeends and when i access the planning board, it doesnt show the days as possible days. why is this?

Hi,
I am using same function module to create maintenance notification. It is creating number. Can you send the example code?
Thanks,

Similar Messages

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Open orders sud not come into effect..

whenever 'm running MRP, system is showing all open orders (sales orders, STO's, Purchase orders)since from 2002 & 2003, & taking into account in MRP run also.
but my requirement is that it sud only take into account the open orders which are april'07 onwords not before than that.
how to do..

No this is not possible to control..only option is we have to close all the orders which have been completed logically like the sales order,STO,Purchase order etc..
since they have not been completely closed due to business reasons..System will not be able to identify ..for SAP it is also treated as open orders..
so we have to take care periodically ensuring that all the unwanted demand has to be properly closed...
reg
DsK

Finder not taking into account local backups when reporting free disk space

Time Machine in Lion (10.7.2) stores local backups of files on your laptop's hard drive when it is not connected to an external Time Machine backup drive. See this article for more information.
If you click on the Apple in the top-left corner of your screen and choose About This Mac > More Info > Storage, you will see exactly how much space your local "Backups" are taking (along with other useful info about how your hard drive space is being used).
Interestingly, the amount of free HD space listed there differes from the amount of free space Finder says is available (when you choose View > Show Status Bar to display it). The amount that it differs is exactly the same as the amount of the local "Backups." So, it appears that Finder is not taking those local Backus into account when it displays free disk space.
So, Finder is telling me I have almost 100 gigs MORE free space than I actually have. I would prefer Finder to show me how much space I have AFTER the local Backups are taken into account.

The article that you linked to gives the rationale for this:
Note: You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.

How can I fix this? Text and images collide, space and margins are not taking into account. The whole page layout is a mess.

Hi,
Whatever I design in muse is totally different from what the preview in the browser shows. Texts crashed with images, and spaces and margins are not taken into account,
Is there a way to fix this? Is it a bug?
Thanks.

Hi Federico,
Please take a look at this forum post for a similar discussion : Aligning multiple HTML objects on one page?
Regards,
Aish

Updating textfield with DEL key not taking into account

I have a decimal field which accepts only numerals...
after modifying the value in the field and pressing an OK button...the new value is reflected in a table...
but if i modify the same field value using the "delete" key and press OK...the new value is not taken into account....
but the same works with "backspace" key...
So do i need to set anything to respond to del key...
Thanks

Also i am not able to put the code here as it is a huge applicationI did not ask for your entire application. I asked for
demo code means code that we can compile and execute, but it only contains the code relevant to your problem
Here is an example:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DemoCode extends JFrame
     JTextField textField;
     public DemoCode()
          textField = new JTextField();
          getContentPane().add(textField, BorderLayout.NORTH);
          JButton button = new JButton("Update Database");
          button.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    System.out.println(textField.getText());
                    textField.setText("");
                    textField.requestFocusInWindow();
          getContentPane().add(button, BorderLayout.SOUTH);
     public static void main(String[] args)
          JFrame frame = new DemoCode();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.pack();
          frame.setLocationRelativeTo( null );
          frame.setVisible(true);
}If you can't create a simple demo then you don't understand your problem and if you don't understand your problem then how are we supposed to?
custom field So you probably have a coding problem and we have no idea what your code looks like
that accepts only decimal values and why are you not using JFormattedTextField?
And this problem is not seen if i modify the custom field using any other key say like "Backspace".Again this problem doesn't make sense since the character should be removed from the text field before the OK button is pressed.

Rules Quota Increase not Taking Effect

I increase the size of the Rules Quota limit from 64KB to 256KB. However, when trying to add new rules in Outlook it still says "One or more rules cannot be uploaded to Microsoft Exchange and have been deactivated. This could be
because some of the parameters are not supported, or there is insufficient space to store all of your rules."
Is there something else I need to do ?
Elkin Hincapie MCSA 2003\MCTS 2008\ITIL V3\MCTS Exchange 2010

Hi,
Please use this command to make sure your account has got the new rules size.
Get-Mailbox [email protected] | FL displayname, rulesquota
Please also restart outlook to check this problem.
By the way, the quota for mailbox rules applies only to enabled rules. There is no restriction on the number of disabled rules a mailbox can have. However, the total size of rules that are enabled or active can't exceed the value specified for this parameter.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Translations not taking place effect in print forms

Hello All,
I have made some translation changes to my pdf form using SFP transaction. These changes are not showing effect immediately but after two to three days, these changes are working. Does it take that much time or am I missing some thing.
Please let me know.
Thanks,
Rakesh

Hello Aravind,
I restarted ADS server also. It did not showed me any effect. Please let me know the other options.
Thanks,
Rakesh.

Hello Am trying to insert a special characcter "ƒ" but its not taking

Hello all ,
Help is greatly appreciated.
Am trying to insert a special character for currency symbol -"ƒ". Below is my insert statement.
INSERT INTO PROD.region
(COUNTRY_ID, CURRENCY_SYMBOL , NAME)
VALUES
(530,'"ƒ"', 'Netherland Antilles' );
I tried from TOAD as well as Sql Plus , but its inserting as "?" for currency symbol column .
So please kindly anyone provide me suggestion how to have the exact value- "ƒ" to be inserted.'

Hello,
this is anything but trivial.
My characterset is
SELECT value
FROM   v$nls_parameters
WHERE parameter = 'NLS_CHARACTERSET';
WE8ISO8859P15One might assume that inserting the charcter is simply a matter of the correct ascii code
SELECT ASCII('ƒ') x FROM dual;
         X
       191So we set up a test table
DROP TABLE t_nvarchar;
CREATE TABLE t_nvarchar(
     v NVARCHAR2(1)
    ,who VARCHAR2(20)
    );Now we insert some lines using SQL Developer
INSERT INTO t_nvarchar (v,who) VALUES ('ƒ','SQL Developer 1');
INSERT INTO t_nvarchar (v,who) VALUES (N'ƒ','SQL Developer 2');
INSERT INTO t_nvarchar (v,who) VALUES (NCHR(191),'SQL Developer 3');
INSERT INTO t_nvarchar (v,who) VALUES (UNISTR('\0192'),'SQL Developer 4');
COMMIT;And the same lines using SQL*PLUS
INSERT INTO t_nvarchar (v,who) VALUES ('ƒ','SQL*PLUS 1');
INSERT INTO t_nvarchar (v,who) VALUES (N'ƒ','SQL*PLUS 2');
INSERT INTO t_nvarchar (v,who) VALUES (NCHR(191),'SQL*PLUS 3');
INSERT INTO t_nvarchar (v,who) VALUES (UNISTR('\0192'),'SQL*PLUS 4');
COMMIT;And what do we get (Executed in SQL Developer, since SQL*PLUS cannot show the "foreign" characters
SELECT v,who,DUMP(v) FROM t_nvarchar;
V WHO                  DUMP(V)
¿ SQL Developer 1      Typ=1 Len=2: 0,191
¿ SQL Developer 2      Typ=1 Len=2: 0,191
¿ SQL Developer 3      Typ=1 Len=2: 0,191
ƒ SQL Developer 4      Typ=1 Len=2: 1,146
SQL*PLUS 1           Typ=1 Len=2: 0,159
SQL*PLUS 2           Typ=1 Len=2: 0,159
¿ SQL*PLUS 3           Typ=1 Len=2: 0,191
ƒ SQL*PLUS 4           Typ=1 Len=2: 1,146How could it be that SQL*PLUS inserted the character 159 for ƒ?
Because SQL*PLUS uses another characterset by default on my machine
SELECT ASCII('ƒ') x FROM dual;
         X
       159So the only reliable way to insert UNICODE characters is the UNISTR function. And of course this only works when the column can accept these values.
When you repeat the example with a VARCHAR column
DROP TABLE t_nvarchar;
CREATE TABLE t_varchar(
     v VARCHAR2(1)
    ,who VARCHAR2(20)
    );Now we insert some lines using SQL Developer
INSERT INTO t_varchar (v,who) VALUES ('ƒ','SQL Developer 1');
INSERT INTO t_varchar (v,who) VALUES (N'ƒ','SQL Developer 2');
INSERT INTO t_varchar (v,who) VALUES (NCHR(191),'SQL Developer 3');
INSERT INTO t_varchar (v,who) VALUES (UNISTR('\0192'),'SQL Developer 4');
COMMIT;You don't get what you might expect
SELECT v,who,DUMP(v) FROM t_varchar;
V WHO                  DUMP(V)
¿ SQL Developer 1      Typ=1 Len=2: 0,191
¿ SQL Developer 2      Typ=1 Len=2: 0,191
¿ SQL Developer 3      Typ=1 Len=2: 0,191
¿ SQL Developer 4      Typ=1 Len=2: 0,191Regards
Marcus
Edited by: Marwim on 25.03.2013 16:06
Added explanation for value 159 in SQL*PLUS

Adjustments not taking full effect

Hello,
I am editing a photograph in Photoshop CC 64bit and when I try to use adjustments such as Brightness/Contrast, Levels, Curves or Exposure etc, the adjustment does not seem to take effect to the extent that I am shown in the preview. So for example, I want to increase the brightness using the Brightness/Contrast sliders, I have the Preview button ticked so I can preview the effect and when I set it how I want it to look and click OK, the photo changes, but not to the extent that the preview is showing me. So the photograph is getting brighter, but not as bright as I can see when I'm previewing my adjustment. This happens on more than just the Brightness/Contrast adjustment. So far, I've had this problem with Brightness/Contrast, Levels, Curves and Exposure.
This only seems to happen when I am editing NEF files in Photoshop. I've edited JPGs and they work fine. Another thing I have noticed, and this might just be coincidence, but when I am editing a NEF in Photoshop that has not been adjusted in Camera Raw (ie the sliders in Camera Raw have just been left at 0), I don't seem to have this problem, only when my NEF has first been edited in Camera Raw, then opened in Photoshop.
Has anyone else had this problem? If anyone can advise on how to stop this from happening I'd greatly appreciate it!
I am using Photoshop CC Ver 14.2.1 x64. I am using a PC running Windows 7 Pro x64, with 8GB RAM and Intel i3 CPU 3.40GHz.
Thanks in advance for any help.

Thanks for your response c.pfaffenbichler,
I have attached some screenshots.
Before Adjustment.jpg is the photograph in Photoshop before I have applied an adjustment.
Preview Adjustment.jpg is the photograph as seen when I am previewing an adjustment (I have increased brightness quite a lot here in order to emphasise the problem).
After Adjustment.jpg is the photograph after the adjustment has been applied.
I have tried making an adjustment when viewed at 100% and this looks like it works fine.
Is this something you have come across before then?

Obiee 11g 11.1.1.6 Action links not taking into consideration DashBoard Prompts

I really hope someone can help.
I have a dashboard with an analysis that has a column that is not shown but is prompted via dashboard prompts.
This dashboard is a summary set of data and the column in question is deliberately exclude at the request of the users for clarity within the analysis.
An example would be a pivot report that looks something like this.....
OrgUnit
Year 2010-11
Year 2011-12
Org 1
5
19
Org 2
7
25
Org 3
3
7
With a Prompt on the dashboard for example pay grade set to a default value.
The dashboard prompt works just fine and only the items prompted for are shown.
However - the dashboard report has another report linked via an Action Link - that allows you to drill down on one of the values.
The prompts on the linked report are Org Unit, Year and Pay Grade.
clicking on the Year 2010-11 value for Org 1 I would expect only 5 results however every value for the year 2010-11 at Org 1 is returned and the prompt on pay grade is ignored - obviously as it not passed by the action link!
How can I get around this?
Is this a 'feature' of OBIEE as other similar tools I have used take any top level prompts as explicit parameters for further drill downs - any help would be appreciated.....
J.

Hi,
Yes, we do face this issue.There is no workaround for this issue as of now.
Rgds,
Dpka

Function exit ..not comes into effect.

Hi,
i made changes in one function exit which is called in me21.
i activated n placed break point.
still it's not going in to that ...
what wud be the problem..
Help me.

ravi,
As i am new to this txn...plz guid
i created project...
in Enhancement assignments what can i give?
i want fucntion exit..exit_XXX to be activated..
where can i do this?
Message was edited by: raja gurrala

Corruption of User privileges on folder hierarchy (not taken into account ANYMORE)

Hello.
We use Portal 3.0.6.3.3 (still EA release) on NT with Oracle 8iR2.
We have set a Content Area and a very classical folder hierarchy to be managed by a single user (called administrator having all privileges on all folders) and other users having just the "Manage Items" and "View Content" for all folders, starting with the root folder.
It has worked perfectly for a while but after further work on privileges that, unfortunately, we cannot trace back, we have our folders not taking into account the privileges set (under the Access Tab) anymore.
Actually all users have now all privileges on the whole folder hierarchy. It means, an "Edit Folder" not only provides the "Add Item" link option but also all other options (Folder Properties, etc) are available.
We have checked again and again the privileges on the CA, root folder, folders etc, tried and removed and re-created the users or new users etc without success.
We imagine some privilege management-related table of the Content Area/Folder are "corrupted".
How could we return to a normal situation? On which tables of Portal schema should we investigate and try to find out what is going on?
Thanks for any help.
null

... still me.
OK, forget my question. It appears that some "generic" group priviliges (AUTHENTICATED_USERS) had been changed by mistake thus overriding any other settings of the users and groups we were contemplating. So everything is under control now...
Thanks for having read anyway ;-)

Changes is special conversion routine not taking effect

I changed a special conversion routine specified in a conversion rule(BD79) with a rule type copy sender field.
I made the required changes to the function module CONVERSION_EXIT_&_OUTPUT and activated it but still the outbound Idoc suggests that the changes are not taking effect.
Can someone suggest what may be the reason for this?

The issue got resolved

Changes to php.ini not taking effect

I'm running Leopard 10.5.8 with the Apple-supplied versions of PHP (5.2.10) and Apache (2.2.11). Changes made to the /etc/php.ini file are not taking effect after stop/start of Apache. phpinfo() and shell command php -i confirm the 'status quo'. The php.ini file permissions are 444 with root/wheel ownership. It was copied from the php.ini.default file that came with the php distribution. Here's what I'm trying to change - seems pretty like this should be pretty basic stuff:
include_path = ".:/usr/local/some_directory"
// Original entry in the php.ini.default file was commented out
// The directory '/usr/local/some_directory' exists
// phpinfo() only shows include_path = .:
magicquotesgpc = Off
// Original entry in the php.ini.default value was 'On'
// phpinfo() shows magicquotesgpc = Off
I've been all over the php.net website and cannot identify my error. Shouldn't the changes to the php.ini file should be interpreted immediately after restarting Apache?
Has anyone experienced a similar problem? Suggestions for fixing this malfunction would be greatly appreciated. I know I can hard code workarounds into my PHP code but that really defeats the whole purpose of even having a php.ini file....

Was able to successfully implement these changes on a different Mac OSX 10.5.8 system. Different architecture (1st system is MBP, 2nd system is MB) although each system has all software updates installed and is up-to-date. Copied php.ini file from MB to MBP and problematic settings were corrected. Ran /developer/applications/utilities/filemerge.app to check for differences between the two php.ini files. Found one (line 305):
Failing entry: error_reporting = E_ALL
Working entry: error_reporting = E_ALL & ~E_NOTICE
I took out E_NOTICE to help with debugging as per instructions from php.net/manual/en/errorfunc.configuration.php
Go figure....

Special rules in OP03 not taking into effect in cm25

Similar Messages

Maybe you are looking for