Special settings or config needed in controlling when a new plant is create

hi,
what setting we need to do in controlling when a new plant is created.
regards.
shivaji.

Hi
That is dependent of your CO set-up.
Have a look to derivations rulesin CO-PA , PCA and OKB9
perhaps some product costing
regards
Paul

Similar Messages

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

When a new site is created can a user name and password be generated for it automatically?

I have a work request from a manager that is asking, when a new site is created (via workflow), that a generic user name and password be created just for that site?
If it is possible I would like for it to be created at the same time as the site be being created or do I need to wait until after the site is created and then trigger a workflow to create the generic user account?
this account is only needed to do one thing.. upload documents to a folder.
of course there can be multiple sites being built at one time and would like for this to be auto generated.... and possible be in a hidden list so I can include the info in a workflow email letting the receiver of the email know that
they need to use this specific user name and password just for this site.

Hi SPSAdminTC,
According to your description, my understanding is that you want to create sites and grant users permissions on the sites via workflow in SharePoint 2013.
Users are stored in AD, before you grant site permissions to them, the name and password have existed in AD users and groups. So, you need to add the users into AD before you grant permissions to them.
In SharePoint 2013 Designer, you can use REST API to create site and assign permissions to users. You can use Send Email action to send email to users and customize the body of the email.
More information, please take a look at:
http://rogereriksen.wordpress.com/2013/05/24/create-a-sharepoint-site-using-rest-in-workflow-with-sharepoint-designer/
http://www.sharepointbay.com/assign-permission-rest-api/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to create an automatic email when a new announcement is created

Hi,
In Sharepoint 2013, how can I configure it to automatically send an email to all users when a new announcement is created?
Regards,
Stephen.

You have 2 options
#1 You can set Alerts at the announcement list level as shown below. In the send alerts to users you can add your user emails or distribution list email and choose email as delivery method. You can choose to
send Announcements on various actions that are there on the form. This is simple way. This send email the out of the box style. You cannot change that.
#2 The other option is to use SharePoint Designer and set a workflow on changes and send mail. You can customize the look and feel of it there.
Srini Sistla Twitter: @srinisistla Blog: http://blog.srinisistla.com

When a new user is created on the Server Computer,Why profile for the user is created as computername.username?

When a new user is created on the Server Computer,Why profile for the user is created as computername.username?

This is done if there are domain users with the same name. For example, if there is a domain user named 'test' who has logged in on the server, he will get the profile 'test'. If you then create a local user named 'test', the profile 'test' already exists
and the computer will create the profile 'computername.test'

Hello, i was wondering why itunes retains all old backups of ipad/ipone... is thier a way of overwritting the backups when a new one is created ?

Hello, i was wondering why itunes retains all old backups of ipad/ipone... is thier a way of overwritting the backups when a new one is created ?

That is covered here:
iTunes: Back up your iTunes library by copying to an external hard drive
What kind of photos are you talking about?
Ones in the iPod's Camera Roll album are included in the iPod backup that iTunes makes. Photos synced to the iPod or not and they are not in your iTunes library either. You have to back those up separately.
Also the iPod backup that iTunes makes is not included in your iTunes library. It location is listed here:
iTunes: About iOS backups. So back that up too.

Trigger a event and send an email when a new entry is created in a table

Hi All,
I have scenario here where i want to trigger a event and send an email too when a new entry is created in a Ztable or an existing entry is changed.
Please let me know how can i achieve this.
Please excuse me if you find it basic as I am not very old in Workflows.
Thanks in Advance,
Saket.

Hi..
For your Requirement workflow not Required.
Write a Program to send Mail. This Program has to execute when ever the Save Button is Click, then the mail will be sent.
Check the program in this [link|https://wiki.sdn.sap.com/wiki/x/nYKdAw ], which send the mail.
Regards,
Surjith

How to automatically update InfoPath Form fields(Design) when a new Column is created in SharePoint list?

Hi All ,
We have a scenario to automatically update the Infopath form(List Form) fields(Field Name and Control) when ever a new Column is created in the SharePoint list. Is it possible to do this? any options or suggestions?
Thanks and Regards,
Nandini

Hi Nandini,
I am not very sure will this be going to help you. Ideally, it's not so easy to communicate with infopath using object model. But still you can give it a try using below link :
http://social.msdn.microsoft.com/forums/sharepoint/en-US/00125fdc-2115-47ea-8e8b-1ca9e5942f83/update-infopath-form-field-in-event-receiver
I think the above solution is trying to update the field. Addition to that you can try creating a field and control.
Let me know if it helps !!
Thanks

I need to upgrade Firefox V14 to V25. users personal settings and bookmarks not are removed when the new version is distributed. how can i do packaging ??

I have to perform upgrade from Firefox 14.0.1 to Firefox 25.0.1.
I have downloaded offline installer and installing it.
i have downloaded and its installing fine for -MS .
after launching the icon in desktop getting following prompts
import The settings and data
import install solutions, bookmarks, browsing history, lose the north, and other data from:
Microsoft internet explorer(need to select this option)
import not anybody Thing
next
valj homepage
import home page from internet explorer (need to select this option)
how i should suppose to suppress the this prompts.
and also my new package should not delete the older book marks .
support me to handle this case... :(

Whenever your upgrading firefox browser, it updates only the browser it never remove your settings and bookmark. If you like the clean reinstall follow the below steps
Note: clean reinstall removes everything from your system
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Need to control Closure of Purchase Order on Creating GRPO or A/P Invoice

Hi All,
         I have created a single Purchase Order with multiple Line Items. This Purchase Order is to be executed every Much. We do not wish to give the Vendor a new Purchase Order Every month and want to use the first Purchase Order for reference purposes.
         Can I create a GRPO or a A/P Invoice for the Whole Purchase Order without closing the Purchase Order.
         So when my service is completed I can Close the Purchase Order Manually.
         My Purchase order is Item Type.
Please Assist.

Hi,
    Thanks For your reply , I do not wish to do that way reason is
I am giving a PO to the vendor for 10 QTY (this 10 QTY is for every month). so every month I will do a GRPO / A/P Invoice for 10 QTY. BUT to the Vendor i need to send a PO of only 10 QTY (and not a PO for 10 QTY per month)
e.g. 1 Jan 2012 create PO with doc number 1 for One Item with 10 QTY (I print it and send it to the Vendor)
         on 31 Jan 2012 i create a A/P invoice against the PO (this will close my PO)
         Again on 29 Feb 2012 i wish to create a new A/P Invoice using the Same PO Doc number as my reference (I DO NOT wish to close my PO of Doc number 1)
          I dont want to create a new PO for Feb 2012. (Reason is i want as my references with my Vendor to flow on PO number 1 and if I create a new PO for month of FEB 2012 there is a possibility of the vendor being given one more PO which i dont want to happen)
         I want all subsequent A/P invoices to use my First PO as my Based Doc.

What do I need to do to default some values when a new row is created in a tabular form?

Hello all -
I have a tabular form which requires a few columns to be entered by the user when s/he creates a new row, but other fields in the column can just default to certain values. How do I set those default values so that the user doesn't have to be bothered with entering any data except those that MUST be entered?
An example:
Form1
REGION        COUNTRY       CITY
APAC            JAPAN            TOKYO
APAC            AUSTRALIA    SIDNEY
APAC            KOREA           SEOUL
REGION is nearly always APAC, so I want to default to that. The user can still adjust it if necessary, but I want to set it for the user, just to save having to enter a value. When the user clicks the the Add Row button, I want to load that value right away and leave the next two fields blank so the user can enter whatever they want.
Thanks!
John

Hi,
Go edit that column.
Under Tabular Form Attributes you can find options to set default value
Regards,
Jari

Cannot change Locator Control when defining new Subinventory

Hi,
I'm trying to create a new subinventory, in R12.1.3, and can't change the Locator Control field which is set to Preprecified. The option is grayed out/locked.
In the Inventory organization parameters the Locator Control is set to "determined on subinventory level", but any chage doesn't affect the option in the subinentory.
Can anyone pls explain why?
Thanks.

Hi,
once check the attributes in inv tab of master-item form.
Regards

How to keep old session id when a new session is created in web site

Hi,
I have a question about HttpSession in a Struts framework based project development.
I have a web page "a.jsp" in public site (no need login) which can navigate to other pages/links. There is a button on "a.jsp" to popup a new window "pop.jsp" and create a session (session1). Usually, when I navigate to other pages/links from "a.jsp", it doesn't affect this "pop.jsp" and its session1. However, if I try to goto a secure site - a login page "login.jsp" from "a.jsp", since the "login.jsp" needs to kill current session before the login, the current session1 within the "pop.jsp" is killed at that time. When I go back to "pop.jsp", it will create a new session2 and the original session1 attributes does not exist any more. Therefore, I need to save the session1 id in somewhere to compare it with new session2 id when session is changed, and display some message in "pop.jsp".
Do anyone know how/where to keep session1 id? Any sample/suggestion would be appreciated.
Hanna

check reply 2 of [http://forum.java.sun.com/thread.jspa?threadID=5279453&tstart=0|http://forum.java.sun.com/thread.jspa?threadID=5279453&tstart=0]
like that you can comapre

FCPX 10.1.3 Project vanishes when a new project is created in the same event

I've been working on avery complicated project all day with multiple layered clips with key frame animations, colour effects etc. All was fine until I opened a new project in the same event which I was going to use to create some effects sequences for the main project. When I went back to the original project it was empty. Tried the Undo function in case I had done anything stupid but it was greyed out. Went to the FCPX backups and the last file was almost 2 hours old but did not have any sign of this project. The only thing I have left is all the imported media.
Any ideas? Using FCPX 10.1.3. This is really annoying as all I have left is an h264 file of the almost complete project and it will be almost impossible to start from scratch.
Thanks for your attention

The edited project was 60 seconds making up an intricate title sequence involving 24 video segments and 48 png/ PSD files. Had a brain storm and was wondering if there is anyway the the project could move to another event so currently going through all the event folders on my FCPX edit drive. I just can't see how a project can just vanish.
Thanks for your suggestion.

New alarm added when a new event is created in calendar

Why a new alarm is automatically added when i create a new event in calendar? is it a bug?

thank you for your answer
i talk about reminder (sorry i'm a french user..)
the default for events is "nothing" but i always have a reminder when i create a new event (10min before) .. i don't understand why..

Special settings or config needed in controlling when a new plant is create

Similar Messages

Maybe you are looking for