Special Stock E not supported (check your entry) Message no.

Hi,
While we are doing the returns delivery, we are getting the error "
Special Stock E not supported (check your entry)
Message no. M7146
Diagnosis
The specified objekt (Special Stock E) is not supported."
This is an M.T.O scenario
In the returns order the requirement type is 'KE"
The item category is REN
Schedule line category is DN
movement type is 651
Kindly guide how to over come this issue.
Warm Regards
Somnath
09903518371

Dear somnath
For information, in returns scenario, special stock indicator E will not support.  The logic behind this is that while taking back the goods into plant, you should not assign those stocks to original sale order.  Either you have to post the stock for Quality or to some new storage location.
thanks
G. Lakshmipathi

Similar Messages

  • Special Stock E not supported (check your entry) error in returns delivery

    Dear friends,
    While we are doing the returns delivery, we are getting the error " Special Stock E not supported (check your entry)
    Message no. M7146
    Diagnosis
    The specified objekt (Special Stock E) is not supported."
    This is an M.T.O scenario
    In the returns order the requirement type is 'KE"
    can u pls tell me how the requirement type is determined at sales order level. Can it be changed manually.
    How the strategy group is linked to requirement type.

    Hi,
    Requirement type KE you can not changed manually.
    For a strategy two requirement types are linked. One is from PIR requirement type,another one is from customer requirement type.
    For 20 strategy, customer requirement type is KE.
    For more detais Goto SPRO>Production>Production planning>Demand management>Planned ind req>Planning strategy>Define planning strategy.
    Here you can find the link between requirement type to a strategy.
    Regards,
    Dharma

  • Error M7 146 : Special Stock E not supported

    Hello Everybody,
    We have the following situation and would request your suggestions:-
    In VL01N, we are trying to do a PGR via Returns Delivery (Delivery Type LR) for a Make-To-Order product. The system gives the error M7 146 "Special Stock E not supported (check your entry)".
    Cause: In the background, it is trying to do a Movement Type 651 and is expecting an "E" for special stock. However, in T/Code OMJJ, the Movement Type 651 does not have the entry for Special Stock "E".
    Question:
    Would the introduction of the value "E" for 651 for MTO have any impact on MTS products because MTS products also use 651 for MTS, althought they use it WITHOUT the "E".  Yet, it might not be advisable to risk changing standard SAP Movement Types after going live. Hence, this question to you all. Your advise and experiences would be most appreciated.
    Thanks,
    Srinivas

    Hello All,
    This issue has not been resolved. Could someone help ? In simple terms:-
    We have an MTO product that was sold with SAP Special Stock Indicator "E" + Material Master Strategy 20 that is now coming back to the company for repairs.
    To receive the product, we create a Returns Order and try to do a Returns Delivery and PGR.
    However, while trying to create a Returns Delivery, the system says "Only 0 EA of material xxxx available. An item with no delivery quantity is not permitted. Item will be deleted".
    Question: Why is the system expecting Stock to exist for Returns ?
    NOTE:
    1) The issue is NOT with the Delivery Item Category field "Check Quantity 0". It should have value "B".
    2) The Item Cat & Sch Line Cat for Returns are NOT relevant for Availability nor for Transfer of Requirements.
    3) The Item Cat is NOT relevant for the Special Stock Indicator because it is the same for MTO products and MTS products.
    Thanks,
    Srinivas

  • Storage bin 999   does not exist (check your entry)

    Hi Gurus,
    In Lean Warehouse Management,
    When I tried to post the stock in MB1C, using movement type 561 it is giving the following message.
    Storage bin 999   does not exist (check your entry)
    Message no. L9009
    Will some body try to help me out.
    Thanks&Regards
    Srikanth

    Hi Gurus,
    This errror is also coming during the stock posting using MB1C(561 movement type)
    Error during search for WM movement type (561     )
    Message no. L9005
    Please let meknow ASAP.
    Thanks & Regards
    Srikanth

  • " Unit of measure ****** is not defined; check your entry in table T006

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in  WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.
      Hi Itzell T,
          While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
          So, functional consultant should take care of this issue just let him know the message.
       He know what problem actually is and fix the problem as Ankur had said.

  • Storage bin 320 902  does not exist (check your entry)

    Storage bin 320 902  does not exist (check your entry)
    Message no. L9009
    I have created the new bins in the interim storage area 902. In the table LPAG also the storage bins are visible. I am creating thre GR for the PO in the system but still getting the error in as above . Please help me out.

    Hi
    check the movement type configuration which is used. So u can find what storage bin is used for the particular movement type.
    If not existed create the interimbin.
    Hope this helps you...
    Rgds,
    Kris.

  • Special Stock E not supported for movement 313

    HI,
    I would like to use movement type 313 (Transfer posting SLoc to SLoc - remove from storage) with special strock E. System shows message: "Special Stock E not supported ..." for movement 313. Could you tell me if it is possible to change this movement type ?
    Best regards,
    MK

    yes, not ony E other special stock are not aceepted  with 313 movement type.
    Your requirement is not possible with any standrd movement type.
    Take ABAPer help for Zmovement type

  • Goods Issue for Cost Center 201 : special stock E not supported

    Dear guru ,
    I need to run a goods issue(trx.MIGO) for cost center using movement type 201 for a material
    in special stock E (with sales order and sales order item).
    The system send this message : special stock E not supported.
    How can it solved this problem ?
    Thanks in advance.

    first tranfer stock from Sales Stock to Own stock as follows
    Tcode - MB1B / MIGO
    Mvt type -  411 E           Transfer posting sales order to own
    Then issue this own stock to Cost center as follows
    Tcode - MB1A / MIGO
    Mvt type - 201
    hope it helps]
    Regards,
    Rahul

  • Special Stock E not supported

    Hi Friends,
                                We have created a sale sorder for jobwork, against that production order has been created and the material taken as sales order stock and delivered the material. Now, customer want some material needs rework. He has sent back some material. Now we have created a return sales order and created out bound delivery. now while doing the post gooods issue for this outbound delivery(so that it will come into our stock), system giving the error message as "special stock E  not supported". please reply....

    answered

  • Storage bin ZZ1 998 AUFNAHME does not exist (check your entry)

    While in MIGO transaction, trying to post goods receipt with movement type 561, the system gives the error :
    Storage bin ZZ1 998 AUFNAHME does not exist (check your entry)
    How can I fix this error ?

    I had the exact same error yesterday, still I haven't figure it out yet.
    I can add that you must have that storage location connected with WM, and there's something wrong in this integration.
    Cherrs.

  • MB1C Error "Storage Bin 450 does not exist Check your entry"

    When doing MB1C error message says
    :"Storage Bin 450 does not exist Check your entry"
    I have maintained all movement types, storage location well. I have not created any storage Bin then why it is asking for this?
    Please help for solution with steps.

    Thanks for your answer. My problem is different but I resolved it myself as under:
    Log Execution->Shipping>Picking>Lean WM-->Define control parameter and no. Range....All three tabs were set.Here in check box I tick mark as Active Lean WM.
    Then went to Control Plant /Storage location/Warehouse No Assignment
    Here Plant/Storage Location/Warehouse were given
    Degree of activation=1
    store tye for picking in LWM=005
    So Lean WM was activated. So in MB1c this error was disappeared as I had activated Lean WM.
    But another error came "There is no item category assigned to account 799999/4050" This is related to field status group in G/L account but still not solved.I am missing Commitment Item in tab Create/Bank/Interest in my G/L account. I tried to run program RM07CUFA in SE 38 saying error No MM group in 3 tabs but could not further identified.
    Above issue was resolved sothread is closed.

  • JITOM error movement type 000 is not allow (check your entry)

    Hello experts,
    In transaction JIOM i try to do an ACTION, but the system display below error message.
    movement type 000 is not allow (check your entry)
    Could you please help me this is very urgent..
    Regards!!
    Hugo

    Hello Hugo,
    Can you clarify what the functionality of transaction JIOM is? I am assuming that this is your own transaction? Going from previous cases of error L3001 being raised, this is almost always associated with the creation of TO documents, can you confirm this is correct?
    Can you check that the Item category is relevent for picking? (Transaction 0VLP)
    Regards
    Stephen

  • Entry EN 40 does not exist - check your entry

    Dear Friends
    I'm facing a Issue in MSS where when manager is trying to view the employee Trip details in UWL. I'm getting a error as "Entry EN 40 Does not Exist - Check your Entry"  I've checked the Table V_T702X & there I can view the Trip Types which I've created for Trip Provision variant 40.
    V_T702X:
    Kindly let me know what else I'm missing as this is very urgent & it need to be resolved ASAP.
    Cheers
    Pradyp

    Hi Ankur
    Thanks for the quick reply,
    I've checked the Table PTRV_HEAD, and below is the data I've found in that.
    Kindly let me know what else need to be checked.
    Cheers
    Pradyp

  • Depreciation key SBDK not allowed (Check your entry)

    Hi,
    Friends
    i am getting an error in assets account,i have already created dep key SBDK in T.CODE"- AFAMA.
    Fallowing is an error"-
    Depreciation key SBDK not allowed (Check your entry)
    Thanks + Regards in Advance
    SN.Noorie

    Hi,
    This is not the forum for this..please check the following link:
    http://sap.ittoolbox.com/groups/technical-functional/sap-acct/am-depreciation-key-xxxx-not-allowed-check-your-entry-815125
    Regards,
    RS.

  • Posting run request for future period; check your entry message no.AA697

    Hello Guru's,
    I have below error while Depreciation run in T.Code AFAB
    "Posting run requested for future period; check your entry" message no.AA697
    Request help
    thanks in advance
    Regards
    Chintamani

    Hello Chintamani,
    Why you want to post the depreciation for future period?
    Is the future fiscal year in open or is the posting period open for that? If no, please open that period with AJRW T code if you want to post the depreciation for future period but it is not recommendable.
    Check the posting period once again because the given posting period belongs to future year? So please do re-chk and give correct period according to your current fiscal year.
    You can get your fiscal year details and assignment of fiscal year variant to the co,code details in OB29 and OB37 t codes respectfully.
    Check the OSS Note: 1150235 - Preventing depreciation posting run for future
    I hope it helps else revert us with your query.
    Thanks & Regards,
    Lakshmi S

Maybe you are looking for