Special stock for customer supplied material
Dear all,
We have a scenario wherein, some of the manufacuring tools are supplied by the customerfree of cost. These are treated as non-valuated material. The requirement is to track the stock of the these materials in SAP against the customer master number.
None of the existing special stocks seem to suffice this requirement. Kindly advise.
Thanks and regards,
Amrita
>
Kesava Raju Gadiraju wrote:
> Dear all,
>
> We have a scenario wherein, some of the manufacuring tools are supplied by the customerfree of cost. These are treated as non-valuated material. The requirement is to track the stock of the these materials in SAP against the customer master number.
>
> None of the existing special stocks seem to suffice this requirement. Kindly advise.
>
> Thanks and regards,
> Amrita
This requires both SD and MM integration. It is a little bit involved because of the special processes for bringing in the customer provided tools you are using. In the process they must be stored / inventoried (without value) as customer owned, kind of like consignment but not the same. Also, do these need to have PRT functionality where their use needs to be recorded during the production process as well?
Bill Wood - President
R3Now Consulting
http://www.r3now.com
Similar Messages
-
Special stock for an STO and MRP segment
Hi,
I have a scenario wherein I need to differentiate between stocks for two diff. STO's in manufacturing plant coming in from 2 diff. plants. The demand at the recieving plant is through reorder point which then drives creation of an STO. I cannot use a MTO strategy as its on ROP. This material is on a MTO strategy at supplying plant while its on ROP (make to stock) at recieving plant.
Is there any way I could create a separate MRP segment or special stock for each STO at supplying plant?
Each STO has diff. label info hence we need to differentaiate stocks between STO's.
Das
Edited by: das k on Jan 26, 2008 12:12 AMIf you want to differentiate a stock .only way is to monitor is maintain 2 material code.
-
Exclude QM lot stock for a perticular material and location for PPDS run
Hi Experts,
I would like to exclude QM lot stock for a perticular material and location for PPDS run. I have unchecked stock in quality inspection under productmaster/ Demand / availability stock in APO, but still QM lot is appearing in RRP3 view and considering for PPDS heuristic run.
Can you plesae explain how to exclude QM lot for a PPDS run.
--KishoreHi Kishore,
Some companies do not activate the iModel for Inspection Lots and manage the Inspection Lots as Quality Inspection Stock. For example this how it looks an Inspection Lot in RRP3 if you manage the Inpsection Lots as Stock in Quality Inspection:
Because you are using the iModel transferring Inspection Lots as QM Lots, you can not use the Stock in Quality.
You can read about it in the help of the field Inspection Lots in CFM1. This is the help:
Inspection Lots in Integration Model
You use this indicator to activate the transfer to SAP APO of inspection lots
that are relevant to stock.
Dependencies
You can only activate an integration model for inspection lots if you have
set in CIF Customizing that inspection lots should be transferred for materials
relevant to inspection lots instead of qualitiy inspection stock.
If the inspection lots in SAP APO are to contain the characteristic value
assignements of the batches assigned to them, you have to transfer the
characteristic value assignments to SAP APO before activating the integration
model for inspection lots. You can do this by activating an integration model
for stock.
Hope this clairy your doubt.
Kind Regards,
Mariano -
Transistion in SAP to know The Stock For List Of Material
Dear Sir,
Is there any transistion in SAP.
To know the stock for list of material.
For Ex=
I want to know the stock for below material in one shot
1) A
2) B
3) C
4) D
Pls solve my problem soon
Thanks & Regards
Ajay PareekHi Ajay,
Following are the some of Useful T.Codes for the stock Report.
LT51 Maintain Preallocated Stock
LVASE Exit stock from Work Center
LX02 Stock list
LX23 Stock comparison IM - WM
LX27 Stock levels by shelf life exp.date
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5OA Display Valuated GR Blocked Stock
MB5T Stock in transit CC
MB5TD Stock in Transit on Key Date
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MILL_ Cutting Stock Transfer
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE Stock Overview
MMBE_ Stock Overview
MMCL Stock Overview by Characteristic
Or you can refer the thread [stock overview;, search there are several threads already available regarding this.
Regards,
Shyamal -
Get the Stock for a given Material no
Hi,
I'm an ABAP consultant, new to MM.
I have a requirement - For a given Production Order I have to find the Material and respective BOM Explosion. Once that is done I have to get the Stock for those Materials [Child Materials].
I have used AUFK and AFPO to get the material from the Production Order and Used MAST table to get the other details and passed it to FM - 'CS_BOM_EXPL_MAT_V2' - This gives me the Child materials.
Now I want to know how can I find the Stock for a given Material. I want to get the Overall Unrestricted stock. Which Table do I have to use. Is there any standard Function Module [FM] or BAPI to get it.
Please help.
Thanks & Regards,
AshishI have gone through the MARD table. I want to confirm - for a Material no there are more than 1 plant and for each plant there are more than storage location. So I have to add the Unrestricted Stock of all those to get the Full Unrestricted Stock.
Please refer Transaction MMBE - I have to use that output. -
How to post return stock to unrestricted stock for only Plant & Material Type combination?
Hello Everyone,
At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
Regards
AnwarDear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy. -
Check the stock for a particular material belonging to a material group.
Hi,
Is it possible to check the stock for a particular material belonging to a material group.
Your help will be appreciated.
Regards,
kavita.Hi Kavita,
go to transaction MB52 , in the selection screen enter the material and the material group that you want the results for, and execute. You will get desired results.
Regards
Mangesh
Reward points if it helps
Message was edited by:
Mangesh More -
Bapi for customer wise material stock on date
hi all,
is there any bapi to find customer wise material stock as on date.as logic as MB5BHi Kumar,
MB5B is a report RM07MLBD u can copy it to Z, do the logic as you required.. instead of searching for new.. & buliding the logic from the scratch.. so that u will get all the Functionality of MB5B
Regards -
Dear All,
Customer Supplied us the Material for job Work Process.
I want the flow to be captured.How to do it??
At the same time customer send us the Challn (57f4) We want to Track that also.
Qty Recvied Per Challan
Qty Baked to customer Per Chlllan
Is there any report is Std SAP???hi
there is no need of creation of purchase order.
as u have recd, the order there, u will have the sales order.
1st u create the material with UNBW-material type
(non valuated material)
create the GR with mvt type 501-E with ref to 57F4 challan
(Gr without Purchase order)
(IIf u do GR by 501-E for the customer receipt material in sales order, ur finished material stock will not go up, but the customer material will reserved for that sales order)
process the same with Production order for material conversion to finished product.
raise invoice to for the finised product with ref to Sales order.
cenvat for the same can be taken by J1IEX without referance to purchase order
Edited by: manipal on Jan 9, 2008 6:05 AM
Edited by: manipal on Jan 9, 2008 6:06 AM
Edited by: manipal on Jan 9, 2008 6:07 AM -
QM steps for customer return material (mvt 655)
Hi Qm Guru
When material return from customer due to some defect (material defect some reason like moisture or rain).then material comes in quality inspection. As for example
after Return from vendor (movement type 655) material comes in quality inspection. suppose 50 kg comes in in quality inspectionu2026and I want to send 10 kg in unrestricted and 40 kg for reworku2026what are steps and how I will do this process
Kindly suggest me pleas
Regards
aqueelHi,
1. Maintain Inspection Type 05 in Material master.
2. Don t Maintain any Inspection lot Origin in SPRO > QM > Quality Inspection > Inspection Lot creation > Inspection at shipping > Assign Inspection lot Origin to Delivery type.
3. Create Inspection Plan for Customer return with usage 5.
4. Then create return delivery with respect to sale order no or Document no.
5. Do PGI.
6. Now a lot will be generated with stock posting option.
Regards,
Muthamil -
Companyu2019s own special stock for vendors
Dear guru.
I need to use a special stock valuated for materials not located in our company provided to vendor.
I donu2019t want to use stock O because I use that for subcontracting.
I donu2019t pay the vendor for managing this stock so I canu2019t use special stock K.
Which special stock can I use ? Can I use special stock W also for vendors ?
Thanks.Hi,
Normally you will be providing the material to vendors for subcontracting purpose.I do not think so that there is a stock indicator for just keeping the material with vendor.
But on what purpose you will be providing the material to vendor? Only for stock keeping purpose?Will you be paying any holding costs for the same?
Regards, -
Hello,
I am extracting records from the table MSKU and would like to create several records for testing. I would like to ask in which Transaction I can create these
Thanks.Hi
Special stocs at customer are created when you perform transactions pertaining to Process of Consignement with customers
Please go throgh the link for creation of such stocks
http://help.sap.com/saphelp_erp60/helpdata/en/dd/55ffe4545a11d1a7020000e829fd11/frameset.htm
Thanks & Regards
Kishore -
Projected Stock for a given Material and Location (System: SCM-APO)
Hello Experts,
Appreciate, if anybody can help me in getting a time-series key-figure data (Stock-On-Hand for a given Material and Location) for a given period.
I am working on a report to display the projected stock (Material & Location are known) for a given period (1 month).
I am able to view the above data in my planning book.
Thanks in advance.
Regards,
Prasanna
Edited by: Prasanna Gunji on Apr 9, 2010 3:42 PMHi Prasanna,
9ASOQMQTY - Stock in quality inspection
9ASOTRSQTY - Stock in transit
9AAVLSTCK - Projected Stock
Hope this helps
Regards
R. Senthil Mareeswaran. -
Custom Change Request Selection for Customer/Supplier Update
Hi experts,
Anyone knows how is possible to display the change request selector popup when starting a Customer/Supplier/BP update?
For MDG-C and S I only have this popup when is related to creation process. When is a update the standard change request is considered for the process.
Screen on creating a customer
What I need is the same screen when starting an update process, because I will need to specify a Z change request type. Anyone knows if this can be made with some configuration?
Kind Regards,
Fabiano MoraesHello Fabiano,
You will get this pop-up only if you have more than one CR type linked to the corresponding business activity. If you only have one CR type, then that CR type opens up by default. -
Where can i find the Datewise stock for a particular material
Hello friends,
In which table i can find the stock of a particular material on particular date?.MARD, MCHB these all tables gives the current stock of material.But i want to find the stock of material on particular date.In Report MB5B and MC.9 we can find the stock on particular date but is there any table from where these reports fetch the data?
Thanking you guys in advance.Dear Jitendra,
Check once again in this thread whether are you able to find out some help.
But I'm sure MB5B is not getting the info from a single table,it's getting the information from info
structures and few tables.
table to see stock on particular date
Regards
Mangalraj.S
Maybe you are looking for
-
I have a Macbook Pro. I´ve just installed Lion version 10.7.3. Basically, one day I turned on my computer, and all my desktop folders and pictures were missing. And the finder just kept flashing with screen that said "finder quit while trying to rest
-
this is an error I get, i tried everything to solve it, please help org.xml.sax.SAXParseException: com.sun.xml.parser/P-067 at com.sun.xml.parser.Parser.fatal(Parser.java:2817) at com.sun.xml.parser.Parser.fatal(Parser.java:2805) at com.sun.xml.parse
-
What are the futures of ios5.1.1
What are the difference of IOS 5.1.1 and IOS 7 and its applicable to use IOS7 to IPAD1
-
Apple VGA adapter not compatible with OS 5 on iPad!
Few months ago I updated my iPad 2 to OS 5. Since then, the Apple VGA Adapter has stopped working and I'm no longer able to mirror the content of my device on my TV (or any other TVs or equipments for that matter). Before the update, with OS 4, it wa
-
Vim doesn't display correctly utf8 characters
Hi, I don't use an utf8 locale, but some files (like latex sources of my reports) are in utf8 for compatibility with other pcs. Since a while, but i cannot recall exactly when (normally, I don't use vi for latex), it doesn't display correctly such fi