Special stock indicator O to add existing custom movement types

Hi Gurus,
Business having the two custom movement types for which they want to add special stock indicator O.
please let me know is it possible to add special stock indicator O to existing movement types.
or
Is it possible to achieve this with creation of new movement types along with current special stock indicators.
Thanks in advance.

have you ever created a new movement type?
try it.
it can only be done by copy of a SAP given movement type, hence it has basically the same functionality as the original movement.
the main purpose for new movement types are to post to other accounts and to segregate authorization.
In other words you cannot add O to an existing movement, you need to create a new movement by copy from a movement that allows this O

Similar Messages

Customer Stock (Special stock indicator B and item category C)

Dear All,
I am mapping my service center scenario in sap,
We are consumer product manufacturer when material is wthin warranty or outside warranty, for any defects or replacement customer come with defective material to my service center.
When i will post receipt for the material it should be the CUSTOMER stock,
For that i need detailed information about special stock indicator B and movement type combination.
also item category C in purchasing documents.
plz tell me that i can directly configure these things in sap or B and C both are standard provided by sap.
I am using 4.7 in my system B and C both are not available.

Hi
In the Standard Sytem these are the special Stock Indicators
E     Orders on hand
K     Consignment (vendor)
M     Ret.trans.pkg vendor
O     Parts prov. vendor
P     Pipeline material
Q     Project stock
V     Ret. pkg w. customer
W     Consignment (cust.)
Y     Shipping unit (whse)
I have not found B - Special Stock indicator.
You can use Accotunt assignment Category D - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
Thanks & Regards
Kishore
Thanks & Regards
Kishore

BAPI_ALM_ORDER_MAINTAIN not Updating Special stock indicator field

Hi Experts
I am using BAPI_ALM_ORDER_MAINTAIN to create and then update a Customer Service Order. When am trying to update the Special stock indicator field in the Components Tab(of IW32) through BAPI, its not doing so, and no error is thrown as well.
The required qty and the batch field in the components tab get updated which ensures that the logic am using is the correct one.
Please let me know if anyone has faced such a situation before. Any workaround(some other FM) to update this field is also welcome.
Points guaranteed.
Thanks
Kulpreet Singh.

Hi!
BAPI_ALM_ORDER_MAINTAIN is only updating a field, when you set the update flag also in CHANGE method.
So if you are maintainig the IT_COMPONENT table, you have to put an 'X' into the same field in the IT_COMPONENT_UP table also.
And of course don't forget to commit the modification.
Regards
Tamá

Work Order - Update special stock indicator in components tab

Hi ,
The requirement is to update the special stock indicator in the components tab of work order based on material number. I tried using the BADI Workorder_update but there was no changing parameter in it and hence it did not work, I also tried using the field symbol option to explicitly change the value but that too failed since it went to short dump prompting that a protected field is being changed.
I am thinking of calling a custom function module at last and updating the value, but for the orders which are being created newly the BADI / user exits contains the temporary number . How could I get the Order number and update the indicator for those orders.
Regards,
Prabaharan.G

I used the EXIT_SAPLCOMK_014 to accomplish this.
Regards,
Prabaharan.G

Authorization Check for Special Stock Indicator in IE02

Dear Gurus,
Would like to check with you if there is an authorization check for change in Special Stock Indicator in IE02-SerData Tab?
For example, the User will only be allowed to change the Special Stock Indicator only to "E" - Sales Order.
Would appreciate your help.
Thanks.

Hi,
This cannot be done by using standard auth object. Standard SAP doesnt support control via this field.
Take help of your ABAP team and create an customized authorization object "Z_OBJECT" with field SOBKZ and which check these field value in table EQBS. Assign this auth object to role and profile you want.
Use the user exit IEQM0003 Additional checks before equipment update. Give a logic to check auth object when while using equipment change tcode.

Special Stock Indicator

Hi. We are trying to come up with a way to not allow picking for material in a WM location that will still allow the netting of the inventory. Because of the complication of an electronic conveyor system, etc, the business does not want to create a new storage location or storage type.
Is there any special stock indicator that will do this? Any other suggestiong ???
Thank you in advance !!
Dianne

I want to be able to net the inventory. I want it included in MRP. And I want to store it in the existing bins and storage types. I just do not want it to be pickable.

Special stock indicator O to mvt. type 201?

Dear All,
The requirement is to clear the outside vendor stock against a cost center via migo.
Can we add special stock indicator O to mvt. type 201 ?
Can you also throw some light on the background of the process.
Thanks in advance.

Hi
You will not be able to add Special Stockindicator O to 201, even of you copy the movemnt & create a new movemnt , you will not be able to add the new entries.
Best way is to get back the Stock into Unrestricted use using 542 & then Post the goods issue using 201.
Thanks & Regards
Kishore

Special Stock Indicator (SOBZK) and Inventory Extractors

I have activated business Business Content for the Inventory Management (0IC_C03) cube with Grouping as In DataFlow Before and Afterwards. However, the special stock indicator field which is part of the extractor and not hidden does not come across into the Transfer Structure, is there a reason and how can I resolve? Thanks
I have gone to the DataSource/Trans Struc tab, have seen in the Data Source and am able to transfer across
Message was edited by: Niten Shah

Hi
In the Standard Sytem these are the special Stock Indicators
E     Orders on hand
K     Consignment (vendor)
M     Ret.trans.pkg vendor
O     Parts prov. vendor
P     Pipeline material
Q     Project stock
V     Ret. pkg w. customer
W     Consignment (cust.)
Y     Shipping unit (whse)
I have not found B - Special Stock indicator.
You can use Accotunt assignment Category D - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
Thanks & Regards
Kishore
Thanks & Regards
Kishore

Special stock indicator taking wrongly

Dear All,
I have a problem while creating production order for MTO scenario (strategy 20 ).
In the components overview of the production order, system is selecting Special stock indicator as 1 (Individual customer stock) instead of Plant stock.
So that I am not able to issue the components to that Production order from the Unrestricted use stock.
Please suggest me what configuration settings need to be checked.
Thanks & Regards
Bala

Hi,
Pls. make the following change in Material Master :
Go to MRP-4 View---> Individual /Coll. Indicator --->
Change it from 1 Individual Requirements to 2 Collective requirements.
This will resolve your problem.
Regards,
Tejas

Special stock indicator in req type

Hi all,
Can anyone tell where is the settings given for the special stock indicator E in Req type KE...
Regards,
Joseph.

Dear Joseph,
I guess this material must be planned using the planning strategy 20,for which after taking a MRP run,the system proposes a
planned order of order type KD and account assignment category as with E.
check the configuration settings for the account assignment category in T.code OPPS for the planning strategy 20.
and for this planning strategy planned materials the system creates planned order for the order type KD - individual customer
order.
Check and revert back.
Regards
Mangalraj.S

Special stock indicator in production order

Hi,
We have a new business scenario from sales department.
For example, A is a MTO item, it has component B & C. Now there is a sales order for A come in, and system create a production order, but there is no enough stock for B. They want to:
1, Allocate C to the production order and other production order or sales order can not take it away via V_V2 or MRP run.
2. Create another seperate purchase order for B and want this purchase order also allocate to this production order.
3. They do not want to use WIP stock because it is difficult to display WIP stock in SAP you know.
I trying to use the special stock indicator "E" for components in production order, and I move C to custom stock via 412 E with no issue.
But when I create a purchase order for B with account assignment "F", it goes to normal stock in MD04. After I post GR for the purchase order, the quantity goes to production order directly, does not show in MD04 and did not reduce the requirement quantity.
If I create a purchase order for B with account assignment "E", it gives an error message "Sales document item is not defined for the transaction. I tried to change the requirement type from "KMFA" to "KE" in the sales order for A, and the production order disappeared, it is not accepted.
How should I define and configure the process?
Thank you so much.
Albert

Hi Albert
I suggest you to take a look on the setting "individuall/collective" on the tab MRP4 of the material master.
For both components, you should set the value 1 and system will always plan the components under the sales order special stock.
BR
Caetano

IW32 - changing special stock indicator on component reservation

Hello
My client has a question with regards to chaning the special stock indicator on a reservation through transaction IW32. We can change a reservation from blank SSI to special stock indicator P but we are unable to change special stock indicator P to SSI blank. Do any of you know if this is possible.
Also, do you know if there is a BAPI that exists for this transaction?
Many thanks
Sue

Thank you for the information but I am not clear on what you are saying...
I understand that the settings that are in MRP screens will drive the reservation i.e. individual / collective and EX lot for lot but what I don't understand it how that stops you changing the reservation once it has been created.
I can create a reservation for a material if it is ind / coll and EX without the item having a special stock indicator P. I can then change the reservation from blank to P. What I cannot do is if the reservation was created with a special stock indicator of P, I cannot change to blank.
Kind regards
Sue

Special stock indicator in Production Order Component overview

Hi Team,
I have one finished product , for which i have created BOM . It has only one component in it .
Now i am creating a Sales order , based on the definition and requirement set , system is creating a production order in background.
When i go to production order and see components overview screen , there is one field special stock . This is getting filled with '1' - Individual customer stock always.
Even though we have stock in storage location , it is expecting components to be in Sales order stock .
If i create a stand alone production order for same materials , there is no special stock indicator set in components .
Can any body let me know how is this special stock field getting populated and what settings has to be reviewed in order to supress the same.
Thanks,
sudhakar

Sudhakar,
Check the MRP parameter 'Individual/Coll' in MRP4 view for the components. This should be set as 2 for collective planning. If this flag is left blank then planning will be based on the parent material (If the parent material is planned for special stock then the components will also be planned for special stock)
Let me know if this helps.
Thanks,
Jaison

Special stock Indicator in process order

Hi Guys,
I am using Configurable material via BOM dependency. During sales order pop-up and selection are coming well. I have selected Component A1, B2, C2 with characteristic value. Now B2 and C2 have procurement type "F" and for A1 procurement type was X. After MRP run, saw in the planned order as 'special stock type E" for A1 material and in process order it is not taking plant stock. Instead it is asking for sales order stock and componet view shows Account assignment as "M" and special stock indicator as "Individual customer stock". Now I changed the procurement type as "F" and delete re-create MRP/ BOM re-run MRP........still it is not picking up plant stock in availability, instead now asking for purchase requisition. For B2 and C2, not asking for ourchase requisition as there is plant stock. . Why it is happening and how to solve it?
Thanks
Krish

Solved it......It was availability check issue.

Special stock indicator for components

Hi,
For a configarable material a sales order is created which in turn creates a production order. Now in this production order for some materials i find that in component overview of production order indicator SP is 1 (Individual customer stock). This happens only in some orders for this material. i have checked the below points
1) Individual collective indicator in material master MRP 4 view for this component is 2.
2) Stock for the component is more that 1000 pieces in unrestricted use which is more than the orders for this material..
3) Planning strategy for this material is 40.
4) Availability check considers the safety stock.
5) BOM Explosion type in customising is not considered in item overview of this component in the BOM.
The issue raised by the customer is that as it comes as a special stock so a purchase order has to be created for this material and till then it is showed in shortage by availability check.
Regards
Sameer.

Hi,
There is no change in the material master sinnce last year. The customer is removing the special stock indicator from production order manually, but he wants to know why this is happening.
Also checked the purchase requisitions created for this component and they have account assignment M and are pegged directly to the sales order.
Best Regards
Sameer

Special stock indicator O to add existing custom movement types

Similar Messages

Maybe you are looking for