Specific books not downloading from ibookstore

I have been trying to purchase a book on the iBook store called a new earth by eckhart tolle. It's in the oprahs book club and every time I try to buy it I get the following message:
This item is currently being modified please try again later
I have already purchased two books already and this book is just not working. Any ideas?
Nick

This item is currently being modified please try again later
I would assume this to mean there is some sort of problem associated with this book and that rather than sell the volume and have a multitude of dissatisfied customers pounding on the virtual iBookstore doors demanding a refund, they simply disabled your ability to download the defective product until "repairs" could be made.
You could, of course, contact support to try and get more specific information regarding the problem and/or an estimate as to when the book is expected to be available for download.

Similar Messages

  • New iPad air. books not downloading from iCloud

    I had quite a few books on Ipad 2. Just bought ipad air and after clicking backup from icloud only a few of my books are readable. When I click on them it says formatted incorrectly or is not a format that ibooks can open. Any ideas anyone?

    Reset your WiFi router and/or cable modem. Unplug it/them from power for about 30 seconds and then plug them in again. The I would restart the iPad and try again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw.  However, it will not download from the  "Update" option in CS6.

    I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw  (I was told that the Camera Raw update 8.3, which is available for CS6, included this camera).  However, it will not download from the  "Update" option in CS6.  I have tried over 10 times - it just says update is not working. and I cannot find an alternate way of downloading this file. So I still can use my camera, even thought I paid to upgrade.  HELP please.

    What OS do you have?  You say you have explained what you had (computer/opsys) but I honestly don't see it here.  If you had mentioned that my advice would have been different; I believe you can only upgrade as far as Camera Raw 8.3 on an older Windows system.  There is more information here (look specifically for the "Revert to 8.3 ..." titles).
    Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
    What you've done/written in your last post confuses things further, unfortunately.  Photoshop 13.1 is strictly a Creative Cloud version.  The highest you can go is Photoshop CS6 13.0.1.3 with perpetual license.
    And as far as I can recall, that version can work on Windows back to XP:
    System requirements | Photoshop
    I don't think you're out of luck, but you seem to be leaping into doing things without having the full story, and are jumping to conclusions a bit too quickly.
    Here's what I suggest you try:
    1.  Remove Photoshop entirely with the Creative Suite Removal Tool: 
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    2.  Install Photoshop CS6 from your original media or from here: 
    Download CS6 products
    3.  Update the application using its own Help - Updates process.  That really should get you the latest Camera Raw version that will work.  If that does not bring you a Camera Raw that works with your Nikon, use the "Revert to 8.3" instructions above.
    -Noel

  • Message "not downloaded from server. You need to take this account online

    After upgrading to 10.4.9, when I click on any of the old emails in my inbox I get the message "this message not downloaded from server. You need to take this account online in order to download it."
    I can still read all email in any other mailbox.
    I can read all email received after upgrading.
    I appreciate any help.
    G4 17 inch   Mac OS X (10.4.9)   1 gb ram

    You upgraded to 10.4.9 from what?
    If you upgraded from Mac OS X 10.3 or earlier, the problem is that the conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
    Help! "You need to take this account online in order to download it."
    More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
    1. Quit Mail if it’s running.
    2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
    3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
    4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
    5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
    6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
    7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
    The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
    8. Open Mail.
    9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
    10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
    As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
    Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
    If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
    Take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
    Overstuffed mailbox is unexpectedly empty
    Ask for any clarifications or if you need further assistance.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

  • How can I transfer all my music even music not downloaded from iTunes to my computer

    How can I transfer all my music even music not downloaded from iTunes to my computer from my iPhone

    Paddy7 wrote:
    How can I transfer all my music even music not downloaded from iTunes to my computer from my iPhone
    See Here  >  https://discussions.apple.com/docs/DOC-3141

  • HT201272 The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on either my iphone or ipad.  I have tried the previous suggestions.  Can you offer further advice.

    The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on my iPhone 4 or my iPad2.  I have tried previous suggestions on the support page.  Can anyone suggest further solutions?

    Hello BwarsIG88
    Check your purchase history by going to the iTunes Store and then click on purchases. From there you can see all your purchase history and download what you are missing.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Regards,
    -Norm G.

  • HT1848 how do you transfer selected purchases (i.e. specific songs, not everything)  from iPad to your Mac?

    how do you transfer selected purchases (i.e. specific songs, not everything)  from iPad to your Mac?

    See your duplicate post : https://discussions.apple.com/message/21574694#21574694

  • What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem

    What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem
    thank you...

    Nobody here can fix your problem, we do not work for Apple. And I have no idea what "Chrho" means. Neither does Google.
    So - exactly what happens when you try to download a program? And from where are you trying to download it?

  • HT201317 my pc is not downloading from photo stream

    my pc is not downloading from photo stream

    Hi..
    After inserting my credentials, the new icon of my new app appears on the screen. On this moment an error appears, in dutch "Verbinding met iTunes store mislukt" meaning, "Connection with iTunes store failed"
    Be aware, your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    edited by:  cs

  • Customizing not downloading from CRM to CDB

    Dear All
    Pl help/ guide on the direction to proceed further. Customizing (Domain Ranges DD Texts) are not downloading from CRM to CDB.
    Background:
    Activities and Campaigns are replicated from CRM to CDB (Mobile). For a particular new field which we have added through AET, the domain ranges are stored in the table DD07T. The task is do a customizing download to replicate these domain ranges to the corresponding CDB table SMODD07T. For this, We would need to create a BDoc type @ BDoc Modeler and then a customizing adapter object with that linked BDoc type. For distribution from CDB to mobile, we would have to create replication object and publication on this Linked BDoc in SMOEAC.
    Issue
    Now, when I am creating the Bdoc type in SBDM, it prompts that mapped table (SMODD07T) should have two key fields and only one Primary key for the segment and since this is not the case it is throwing the error. I have verified with various std customizing adapter objects and their corresponding sBDocs. In all the cases, the SMO table has exactly key fields, the MANDT client and the SFA GUID. Without generating the BDoc type, the adapter object Banega nahi and I experimented in many ways where I created a custom adapter object with any of the standard campaign and customizing related Linked BDoc types for the adapter object, Initial Load is successful and even huge blocks of data is transferred. But the required SMODD07T table is not getting populated.

    Hi,
    Ok the initial load is performed without errors.... But did you check the queues?
    Best regards,
    Caíque Escaler

  • I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

    I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

    Hi Sandra,
    you'll need to edit the security settings to install programs 'Mac App Store and identified developers'
    Open the Systems Preference and go to Security & Privacy.  There will be a section in the 'General' tab for 'Allow apps downloaded from:"  The default selection is 'Mac App Store'.  Change this setting to 'Mac App Store and identified developers".
    This screenshot is taken on OS X 10.10 (Yosemite), so it may look slightly different if you're on a different OS X version.
    Maria

  • I am from iran. i can not download from app store. iTune gives me such an error like this : you must download version 11.1 iTune and when i want to do that i can not.

    i am from iran. i can not download from app store. iTune gives me such an error like this : you must download version 11.1 iTune and when i want to do that i can not.

    Try Here  >  https://discussions.apple.com/thread/4074945?tstart=0

  • ""Install Adobe Flash Player.app" can't be opened because... not downloaded from the Mac App Store"

    I jsut upgraded to 10.9 and it is up to date and also my safari is up to date (no updates available for it). My safari is saying that my flash is out of date. when I follow the links it lets me download but when I double click to install it tell me "“Install Adobe Flash Player.app” can’t be opened because it was not downloaded from the Mac App Store.". When I install the flash UNinstaller and try to install that, it tells me the same. I ALSO found the exact same problem when I tried to install the acrobat installer (some tried to download a pdf and the page told me that my acrobat reader 'might' be out of date). Any thought?

    You're running up against the GateKeeper.
    Download the offline installer: Flash Player 12.0.0.44 (Mac OS X) by right clicking and choosing "Download Linked File As".
    Mount the DMG and when it opens, right click the installer and choose "Open".
    You'll see a warning. Click "Open" again.
    It will run from there.

  • I just bought a wacom and brings photoshop elements 8, but not download from thecd let me know if I

    I just bought a wacom and brings photoshop elements 8, but not download from thecd let me know if I can download the software PSE 8 directly from the Internet. I have the serial number.

    When i bought a wacom tablet several years ago the version of photoshop
    elements that came with it was on the cd (dvd), is it not that way now?
    Or are you having problems installing elements from the included cd (dvd)?
    MTSTUNER

  • This message appears whenever I try to open a file downloaded from internet: can't be opened because it was not downloaded from the Mac App Store

    Just bought a new Imac OX 10.9. Installed contents from previous Time Machine. All looks good. But, now, when I try to open any file downloaded from interent (like the Amazon mp3 downloader, for example or a plugin update) I get this message:
    "XXX can’t be opened because it was not downloaded from the Mac App Store" . Help! Thanks

    Got it solved! System preferences, security & privacy icon, general: allow apps downloaded from Mac Store and Identified developers! Phew!

Maybe you are looking for