Specific Content Will Not Load With Any Browser

This is something I have never run into and can't solve...
I have a D-Link DPR-1260 wireless multi-function print server. My machines are a MacBook Pro with 10.5.1, an iBook G4 with 10.5, a Mac Mini with 10.4.11, and a Mac Mini with 10.4.10.
Connecting to the printer via LPD is a non-issue and works fine with all the machines.
The strange problem occurs when accessing the web based services of the DPR-1260. Scanning, even using Windows, is not supported by the MFP software (Epson) but is done via the browser. Also network settings, etc.
The good (normal): Using a machine running 10.4.11 or 10.4.10 all the web content loads and works fine using any Safari, FireFox, Camino, or Opera. Even using the beloved IE 5.2.3 everything works but the Scan page. Ditto for Win XP SP2 using IE 7 or FireFox and running under Parallels or booting directly in on the MBP.
The bad (weird): On either the MBP running 10.5.1 or iBook running 10.5 only the "simple" pages will load using ANY browser. I don't normally do all caps for emphasis, but I have never seen an issue like this. I cannot access the Scan, Advanced (settings), or Setup (more settings) pages. Even the simple login page only works on occasion.
This certainly appears to be related to OS X 10.5 but I cannot figure out how.
For reference, I have tried every conceivable combination of browser, wired vs. wireless connection to the unit, disabled firewall, disabled LittleSnitch, watched traffic using tcpdump, and looked for odd ports on the print server using nmap.
Given that them problem occurs using WebKit browsers and browsers not using WebKit, and that it works properly using 10.4.* with any browser, I assuming this is some sort of system level problem.
I can provide even more details, but this post is getting too long. If you think you can help and have any questions please ask.
Please, any help is much appreciated!

Yes.
As I see it, it's clearly not a JS implementation issue as not all these browsers handle JavaScript identically (although as a web developer I wish they did). Obviously Safari and Shiira, the two WebKit based browsers, handle it the same, Opera, FireFox, Camino, iCab, and IE 5.2.3 have different implementations.

Similar Messages

One website will not load on any browser, will work on mobile phone

One website will not load on any browser (Firefox, IE, Chrome). Have turned off all security programs and firewalls, have tried in Safe Mode, will not load. It works on my smartphone. Can load the basic site, but not the sign-in page. Says Connected at the bottom of the page, but says Connecting at the top, and the little circle goes around counter clockwise; ran for one hour, still didn't load. It used to load, don't know if I did something or downloaded some program to make it stop.

You can try to access the website in a New Private Window.

Macbook Pro Flash videos will not load on any browser?

On my macbook pro all of a sudden all flash based videos such as youtube will not load and freeze before they are loaded. IT does not work on safari, chrome, or firefox. have uninstalled and reinstalled flash. Used Disk utility. Empted cache. Any idea what is wrong? This problem just started this week. Internet connection is good.

Uninstall Flash
Download OnyX and run all the checks, maintaince and cleaning aspects and reboot at the end.
http://www.titanium.free.fr/
Reinstall Flash
http://get.adobe.com/flashplayer/
If that doesn't work, create a new user, log into it and see if your issues continue.

A specific topic will not render with any search criteria.

I have two similar topics that no matter what i put in for seach criteria they will not be listed in the results. I've tried the following.
Re-importing the .doc
Re-creating and Re-importing the .doc
Confirmed that the file name and title have no special characters
Confirmed that the option to eliminate the topic from search is not selected in the topic properties
I am able to search for the topic locally after generating but I am unable to search for the topic after publishing on the server.
I am running Robohelp 9 on a Robohelp 8 server.

You have checked the new topics survived the journey to the survive.
I'll leave Colum to comment on whether it is a Rh9 / Rh8 Server issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

IWeb RSS feed will not load with any site.

I am trying to display an simple RSS feed on my website and what ever site l use, BBC, France24, ABC, FOX News etc... whenever l copy and paste the RSS link in the widget and click apply. I am shown the message "The RSS feed source can't be reached. Try again."
Here is an example of how i'm inputing the RSS link:
feed://feeds.bbci.co.uk/news/uk/rss.xml
feed://www.france24.com/en/france/rss/
Your help is much appreciated. Thanks

If the widget does not work, search for alternatives.
http://www.google.com/search?q=embed+rss+feed+in+webpage
Found this one : http://feed.mikle.com/
Paste the RSS link without feed:// and configure the result.
Copy/paste the code in a HTML Snippet.

Edge Code will not load in web browser

My OEM edge code will not load in web browser after it has been uploaded to the server. I am using dreamweaver & the OEM file.
The images are all grouped & labeled properly (within Edge Animate). Note the website will not load with ANY web browsers UNLESS you hit the refresh button or reload the web address.
www.anndominion.com
Can somone please tell me what is going on or how to fix the problem? ;(
Here is the code for the website too.
Any help would be great!
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<title>Welcome</title>

<meta http-equiv="X-UA-Compatible" content="IE=Edge">
<script>
var custHtmlRoot="edgeanimate_assets/Home/Assets/";
var script = document.createElement('script');
script.type= "text/javascript";
script.src = custHtmlRoot+"edge_includes/edge.5.0.1.min.js";
var head = document.getElementsByTagName('head')[0], done=false;
script.onload = script.onreadystatechange = function(){
if (!done && (!this.readyState || this.readyState == 'loaded' || this.readyState == 'complete')) {
done=true;
var opts ={
    scaleToFit: "width",
    centerStage: "none",
    minW: "0",
    maxW: "undefined",
    width: "1500px",
    height: "800px"
opts.htmlRoot =custHtmlRoot;
AdobeEdge.loadComposition('Home', 'EDGE-292846011', opts,
{"style":{"${symbolSelector}":{"isStage":"true","rect":["undefined","undefined","1500px", "800px"],"fill":["rgba(255,255,255,1)"]}},"dom":[{"rect":["716px","356","88px","88px","aut o","auto"],"id":"preloader5","fill":["rgba(0,0,0,0)","images/preloader5.gif","0px","0px"], "type":"image","tag":"img"},{"rect":["645px","480px","229px","79px","auto","auto"],"font": ["Arial, Helvetica, sans-serif",[24,""],"rgba(0,0,0,1)","normal","none","","break-word","normal"],"id":"Text" ,"text":"Please Tap Refresh <br>To Load Content.","align":"center","type":"text"},{"rect":["555px","283px","361px","103px","auto" ,"auto"],"font":["Arial, Helvetica, sans-serif",[24,"px"],"rgba(0,0,0,1)","400","none solid rgb(0, 0, 0)","normal","break-word","normal"],"id":"Text2","text":"","align":"center","type":"text" }]}, {"dom":{}});
script.onload = script.onreadystatechange = null;
head.removeChild(script);
head.appendChild(script);
</script>
<style>
        .edgeLoad-EDGE-292846011 { visibility:hidden; }
    </style>

</head>
<body>
    <div id="Stage" class="EDGE-292846011"></div>
    </body>
</html>

Keith,
Make sure the Cluster configuration is right. When did you start seeing this problem?
Host A: Dispatcher->server 0, server 2
Host B: Dispatcher->server 0, server 2
i.e The instance IDs are mapped right.
Also try to hit the individual servers in the cluster the following way.
http://hostname1:50000/irj/portal;sapj2ee_irj=instance_id sends a request to server 0.
http://hostname2:51000/irj/portal;sapj2ee_irj=instance_id sends a request to server 1.
This may give more clues. Unfortunately I don't have access to EP6 SP2 to lookup and tell you the right parameters to look for.
Regards
-Venkat Malempati
Message was edited by: Venkat Malempati

HT1414 On Ipad, I can open Sky/BBC news etc, but when I click on an article with video, it will not load. Any ideas

On my Ipad2 I can open Sky/BBCNews etc. but when I click on an article with video, it will not load. Any ideas
I also lost all content from my diary

If the video is in flash, then the iPad can't play it natively. You need to use different browser apps to access flash content. I see Puffin, iSwiffer recommended a lot.
You may also want to see if BBC has an app. things sometimes work better through an app than they do just through safari

Quicktime plugin will not run in any browser including Safari! Help!

Quicktime plugin will NOT run in any browser. I've been reading a lot about this issue and it seems to be a widespread problem. I didn't have this issue a few weeks ago. perhaps it has something to do with OS 10.6.7? Help, desperate for a solution.

Post a URL? Not sure what you mean as it does not seem to be website specific. I can't view apple movie trailers on apple.com in Safari or Firefox. The plugins just are not there. I've download QT and it shows up in my Utilities folder but no where to be found within firefox plugins/add-ons - same goes for Safari but the plug-ins I do have ARE enabled. Each time I try, I get the install missing plugin prompt, which I do, and as stated before - nothing happens. I've read a lot about moving things in/out of internet plug-in folders in various places, preferences folders, etc. but no luck so far.
Thank you.

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

Flash not working with any browser after update

After an update, flash videos will not stream in any browser (Chrome, Firefox, Safari). I did a clean install of flash and the browsers, but to no avail. Mac 10.10.2. Has anyone else experienced this?

Sadly doing that did not fix my problem either. I just tried doing that and uninstalling flash player, rebooting and then reinstalling flash and I am still having the same problem as I stated here. http://forums.adobe.com/message/4014843#4014843
I have checked that flash is enabled
Unchecked hardware accerleration
Set in the internet options to use software rendering
Tried updating my drivers (it tells me my drivers are up to date, in any case I have only had this laptop since July)
I even tried deleting cookies, though I use IE9 instead of firefox so I just deleted them all instead of just the one for youtube, I honestly can not find the folder for cookies anyway with this windows 7 and how it is set up to try and delete the one cookie.
I am really at a loss as to what to do.

I am running Mac OS X version 10.6.8. I wanted to download Mountain 10.8 but it will not load. Any ideas?

As I said, I am trying to upgrade to Mountain 10.8 but it will not load. Any suggestions?

What do you mean by, "it will not load?"
The way the process works is you purchase it from the App Store and it downloads. When if finishes, it will start the installer automatically.
Which part fails, Download or installation?

Apple home start page will not start and games will not load with flash.

Apple home start page will not start and games will not load with flash.

Never mind...I just figured it out. Restore windows when quitting box in Gen Prefs must be unchecked. To many new little things.

HT204368 bluetooth stopped working and now will not pair with any of my devices ?

bluetooth stoped working and now will not pair with any of my devices? any suggestions?

Hello, oscar302.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful with this issue.
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers,
Jason H.

My iMac crashed. Reloaded Lion. Existing Excel files will not load. Any ideas on a fix?

Imac crashed. Reloaded Lion. Existing Excel files will not load. Any ideas on a fix?

Yup, most users on this forum do not use MS Office, I'd suggest reposting on the Office for Mac Product Forums hosted by Microsoft.
Good luck.

My mail will not load on any of my devices! what do i do

my mail will not load on any of my devices! what do i do???????????

The only way your child could have installed an app from the App Store is that he or she has access to your Apple ID and your administrator account. Give the child his own standard user account, and change the passwords.
To delete the downloaded app, drag it to the Trash. You may be prompted for your password.

Specific Content Will Not Load With Any Browser

Similar Messages

Maybe you are looking for