Specific Destination Address Lookup?

Now on a dedicated GPS device, you can enter an exact destination address, and the GPS device can find it, quickly, and create a route to your destination.
Does Nokia Ovi Maps support direct address lookup on the phone? I have not been able to get it to work.
Now you can locate an address on the phone by finding it on the map, save it to favorites, but this is tedious and time consuming, to get the street number right.
You can also enter the address online to Ovi Maps, and sync the location to the phone into your Favorites. This works well too.   Now you have your precise destination.
Am I missing something or is this a limitation with respect to the downloaded maps to the phone?
To have precise address to GPS coordinates on the phone offline to all known addresses would make the maps too large.
This is using the phone offline. For example, doing route planning, inside your house with no GPS or network connection.
The second case is you have your current GPS position known to the phone, since you are outside, yet the phone cannot determine your specific destination, when you enter it. In this case, you only have a GPS satellite connection, nothing else.   I cannot enter a destination here either.
My belief is you must be "online", either WiFi or with a phone data plan, to get specific destinations.   Is this belief correct?

Biff27 wrote:Does Nokia Ovi Maps support direct address lookup on the phone?
To have precise address to GPS coordinates on the phone offline to all known addresses would make the maps too large.
My belief is you must be "online", either WiFi or with a phone data plan, to get specific destinations. Is this belief correct?
Hi Biff27
The answer appears to be that it is regional variation whether or not you can navigate "Offline" to a specific address. Using v3.04 with UK maps downloaded there is no problem but talking here about small surface area compared with other countries. At one point I had world maps downloaded together with all "ClientIndex" so it certainly wasn't absence of available data to blame but no comparison to that on remote server.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

How to Block Specific IP Address (YouTube)

This is a follow-up question to one I posted earlier this week. I want to block YouTube (and a handful of other sites) from my stepson's new iMac and it was suggested I try/use Leopard's "Parental Control" feature.
I tried that, but the problem is, when he attempts to visit the site, a warning page pops up informing him Parental Controls have blocked the site, then gives him the option to log in as the administrator or to email the admin for access...and that's pretty much the worst thing that could happen. He has serious Obsessive Compulsive Disorder (OCD) and it HUGELY upsets him that he can't guess the Admin password.
Soooooo...can anyone suggest an alternative means of blocking a specific IP address that does so WITHOUT serving up a "Contact the Administrator" message? Someone has suggested blocking the IP address via the network router, but I haven't a clue how to do that.
Any help?
Thanks.

Something else you might look at to see if it is suitable for you is to use the DNS servers from www.opendns.com (on your router for example) and set up an account on there, then exclude the sites you don't want accessed - either by the names of the sites OR by the category of site they are.
What that does is NOT actually "blocking the site" as such, what it does is when the workstation wants to resolve the hostname into an IP address, OpenDNS will fail the request. The user will see a browser page from OpenDNS saying that the site was blocked by the network administrator - you can change the wording and even add an icon if you like.
If the user doesn't have admin access to the workstation (whereby they could change the DNS server locally to your ISP's normal DNS, which presumably doesn't offer this sort of lookup-filtering) and they don't know the IP address(es) of the sites they want to access - obviously if the workstation doesn't have to go to a DNS to look the address up, it doesn't matter whether the DNS is blocking the lookup for you - this works well.
There's more information on www.opendns.com - as I said maybe it won't be appropriate for you, but if it is, it's pretty easy to set up and to administer.

Address Lookup in External LDAP

I did changes in my $OH/j2ee/OC4J_UM/config/oc4j.properties file in order to Lookup in a external LDAP:
toolkit.ldap.dir.1.label=Contacts
toolkit.ldap.dir.1.url=ldap://OtherLinuxHost.mydomain.com:389
toolkit.ldap.dir.1.searchbase=ou=Contacts,dc=mydomain,dc=com
toolkit.ldap.dir.1.filter=objectClass=inetOrgPerson
toolkit.ldap.dir.1.attribute.mail=mail
toolkit.ldap.dir.1.attribute.lname=sn
toolkit.ldap.dir.1.attribute.fname=givenName
toolkit.ldap.dir.1.attribute.alias=uid
In my Collaboration Suite - Messages when I am creating
New Message, click in Blue Torch,
Select from list the "Contactss" directory
Select "Email Address" "contains" * => Go
UM shows the contacts from the External Ldap, but when I try to bcc, or cc or to, it is not updating my destination fileds (bcc/ cc/ to). But if instead of select the List "Contacts" I select the Internal Directory (OID) it works fine?
Which argument I miss ? or how I configure UM for export the email address from the AddrLookup Window to the Message_compose Window in the destination fields (bcc or cc or to) ?
Thanks alot for any help.

It is happening to us as well, we have OCS release 2 9.0.4.2 on Linux trying to access an external OpenLDAP linux server for shared contacts.
After we get the results of the search on the external LDAP, no button works on the Address Lookup window except "Close". It doesn't matter is we select the "Corporate Book" or other Oracle internal address books; we have to close the window and open it again to do a new search.
Are you seeing the same behavior?
I will have a phone conference today (5/11/05) with Oracle support to talk about this issue, we have had a TAR open for about 20 days now.
I'll keep you posted with the results.

Natting of Destination Address

Is is possble to nat the destination address. What I am trying to do it change DNS servers. I would like to have traffic going to the old address be natted but traffic going to the new address not be natted. Finally if the DNS devices generates traffic it would not be natted.

I understand it may be tricky, that is why I posted it. The DNS server is an internal server so from the router point of view I can make it either inside or outside. Currently it is connected directly to a 6509, but the thought is to put a 3640 between the DNS server and the 6509 and using static routes on the 6509 direct traffic for either address to the 3640 and then to the new server. My thought was to do nating on the 3640, but as I indicated I have not be able to get the router to change or nat the destination address and also not to nat traffic to the new address or new traffic coming from the DNS server.
If you are someone could give a specific config or point me to a cisco document that explains how to do this it would be great.

How do I configure my Airport Extreme to work in Bridge Mode and provide specific IP addresses to clients

My Airport Extreme is working with an Airport Express to wirelessly extend my wireless network. Both Airports are configured in Bridge Mode per the instructions I found on Apple's support site. I want to assign a specific DHCP address to a wireless camera that is in range of the Extreme, but I understand that the Extreme needs to be in DHCP Only mode to do this. But if I change the mode to DHCP Only, the Extreme will lose contact with the Express. How can I get both functions to work - wireless network extension and specific DHCP addresses?

Then what device is providing DHCP? Only once device per subnet should be the DHCP server. One should be DHCP and NAT and the other in Bridge mode for most home setups. The unit with DHCP and NAT should be the one connected to your cable or DSL and the other set in Bridge mode only extends your network.
On the wireless config page set whichever you're using to extend your network to "Extend a wireless network" and give it the details of the network to which you're attaching it.

How can I get responses to return to a specific email address?

How do I get all my for responses to return to a specific email address? Does the Acrobat user need to be logged in with this email or is there an option for this?
Any help would be appreciated!

Looks to me like the Distribute Forms feature in Acrobat taps into the email address you have specified in Acrobat as your identity; that's where it gets the mailto: address associated with the submit button in the document message bar.
Furthermore, if you create a form in LiveCycle the distribute process still seems to tap into Acrobat. Just for grins you can open the distributed form in LiveCycle (better make and open a copy so you don't break the Reader extended usage rights), go & look in the object palette at the submit address property of your email submit button and it will be blank. Surprise! This data has migrated to one or more than one script at the document level. And if your user then opens your LiveCycle-made form in Reader to complete and return, the submit button in the document bar corresponds to your identity email address in Acrobat.
So I managed a quick but ugly workaround for an email submitted form by:
Going into Acrobat:Edit/Preferences/Identity
changing the email address in my identity to the desired return address
distributing my form (can do either in LiveCycle or in Acrobat)
putting my Identity email address back where it was afterwards.
Good luck with all that. And if anyone knows a more elegant method, do share!

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

How to create a snapshot report on the specific destination?

dear all
How to create a snapshot report on the specific destination?
thanks
john

user8779435 wrote:
dear all
How to create a snapshot report on the specific destination?
thanks
john
Hi,
when prompted just input the full path with filename for example
Enter value for report_name: /tmp/awrreport.htmlHope this helps
Cheers

How to whitelist a specific email address

We are trying out an ironport C350. I am looking for a way to whitelist a specific email address ex. [email protected] The whitlist appears to onlyl let you add a whole domain or i.p. range and not a specific address. Is there a way to do this or would I need to build some kind of incomming content filter by sender name?

A Content Filter would be the easiest but it is processed after the SBRS check.. Remember you can have a one content filter with multiple checks just make sure you use OR and not AND.
So if you want to make sure a specific email is not spammed check you would need to create a Message Filter (regX expression) but then every single inbound email would be checked againest this filter.
So the best way might be to create a whole new policy and place it before your normal or default policy. Have the policy only apply for sender = [email protected] You can turn off the spam check for this policy.

Trace for a specific IP address in SQL Profiler

Hello,
I am looking for a way to trace from a specific ip address in sql profiler, Is there any filter that we can use to trace the database calls from a specific ip address.
Thanks in advance.

Thanks for the reply, I have tried by selecting hostname from column filters and gave my system name in Like.
When i run application from localhost then it returns trace results, but on live domain it is not returning trace results, M i missing something in configuring filters?

Address Lookup option has disappeared

hi all,
my company recently moved to google mail and i am using a BB with curve 9300. all seems to be working fine except for 2 things.
firstly when i go to compose an email on my BB and look for a company name in the address book i no long have the address lookup function. i am sure it was there when i first set up my BB with our company gmail domain.
secondly 2 way sync seems to be working fine except for when i delete a message on the BB i get the option to delete on handheld and on mailbox and select that. except it never does. i have recived the message over and over from the server. i have changed the settings so on conflicts handheld wins and still the message wont delete on the server. the sync works fine for sent items on BB calender and for read items. just wont delete.
any help would be much appreciated. have been trawling the internet for help but not found anything yet.
thanks in advance
g

Hi gjrc,
The address lookup feature is only available when using a BlackBerry Enterprise Server. If your company has switched to GMail for their mail service, they would not be using BlackBerry Enterprise Server anymore.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Syslog Destination Address

Hi there,
since my ABSE is constantly rebooting I'm trying to get some logs. I can't use the Airport Utility for that purpose since it's not streaming the logs. Also, as soon as the ABSE reboots it dumps the logs.
So I'm trying to stream the logs to my MacBook using the Advanced/Logging & SNMP/Syslog Destination Address.
In that field I've entered the IP address of my MacBook. I've connected it using Ethernet, disabled Airport. Syslog Level to "Debug" -> Update
Then I open my Console and nothing, I've looked in the different Logs everywhere and can't find anything.
Has anyone got it working?
Micha

Hi,
I have not got it working, I would also like to do the same thing, but I believe it is quite tricky. By default I believe that OS X 10.4 is NOT configured to be able to receive syslog log messages over the network.
The program that actually listens for log messages, from the network or from local apps, is called syslogd. www.macosxhintss.com hints has a somewhat confusing write-up on how to reconfigure it to receive messages from the network (http://www.macosxhints.com/article.php?story=20060327074531639). However, this involves tampering with files off of the /System/Library subdirectory, so I'd rather not risk it.
MacBook Pro Mac OS X (10.4.9)
MacBook Pro Mac OS X (10.4.9)

SRW2024 - Forcing clients to use a specific IP address (based on port)

With the SRW2024 managed switch, is it possible to force a client computer connected to a port to use a specific IP address (for example 192.168.1.30) and if the client tries to configure any other address which is not 192.168.1.30, the traffic is dropped and they essentially cannot access any LAN or internet resources?
Basically what I would like to do is associate an IP address with every port on the switch. It sounds like this would be possible using the IP based access control feature, however I wanted to confirm.
Thank You
Message Edited by RedWarrior on 12-05-2008 11:49 AM

Well, I have contacted three different stores asking which hardware version they have in stock, (even providing instructions on how they can check)... Two of the three stores said they didn’t know what I was talking about and couldn’t check it for me, and the third one actually told me to contact Linksys and ask them... as if Linksys is supposed to know which hardware version their store carries!
So I guess I will have to ask once more if anyone here knows how long hardware version 1.2 (for srw2024) has been out?

Wrong Destination Address?

Does anyone know what the wrong destination address message, below, means?
<NT Performance Pack> NATIVE: created IoCompletionPort successfully.
IoPort=0x000009e8
? ??? 26 17:43:32 GMT+00:00 2000: <ListenThread> Adding address:
medusa.internal.talmai.com/10.0.0.127 to licensed client list
? ??? 26 17:43:32 GMT+00:00 2000: <NT Performance Pack> Allocating: '2'
NT reader threads
? ??? 26 17:43:32 GMT+00:00 2000: <WebLogicServer> WebLogic Server
started
? ??? 26 17:43:33 GMT+00:00 2000: <ConMan> CMD_IDENTIFY_REQUEST for this
JVM has the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
? ??? 26 17:43:33 GMT+00:00 2000:<E> <ConMan> Message for this server has
the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
? ??? 26 17:43:33 GMT+00:00 2000: <ConMan> CMD_IDENTIFY_REQUEST for this
JVM has the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
? ??? 26 17:43:33 GMT+00:00 2000:<E> <ConMan> Message for this server has
the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
- Avi
s/\be(\w+)/e-\1/g;

I saw the same problem on our Solaris server with SPA.
Can you specify which bug number this is involved?
Thanks.
Winnie
"Avi Kivity" <[email protected]> wrote in message
news:[email protected]..
WLS 5.1.0 SP7 on Windows 2000 SP1.
- Avi
s/\be(\w+)/e-\1/g;
"Avi Kivity" <[email protected]> wrote in message
news:[email protected]..
Does anyone know what the wrong destination address message, below,
means?
<NT Performance Pack> NATIVE: created IoCompletionPort successfully.
IoPort=0x000009e8
? ??? 26 17:43:32 GMT+00:00 2000: <ListenThread> Adding address:
medusa.internal.talmai.com/10.0.0.127 to licensed client list
? ??? 26 17:43:32 GMT+00:00 2000: <NT Performance Pack> Allocating:'2'
NT reader threads
? ??? 26 17:43:32 GMT+00:00 2000: <WebLogicServer> WebLogic Server
started
? ??? 26 17:43:33 GMT+00:00 2000: <ConMan> CMD_IDENTIFY_REQUEST forthis
JVM has the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
? ??? 26 17:43:33 GMT+00:00 2000:<E> <ConMan> Message for this server
has
the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
? ??? 26 17:43:33 GMT+00:00 2000: <ConMan> CMD_IDENTIFY_REQUEST forthis
JVM has the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
? ??? 26 17:43:33 GMT+00:00 2000:<E> <ConMan> Message for this server
has
the wrong destination
address -8494283096926994801S10.0.0.127:[7101,7101,7102,7102,7101,-1]
- Avi
s/\be(\w+)/e-\1/g;

DESTINATION ADDRESS IN CUSTOMER INVOICE

DEAR ALL,
my customer he would like that the material should be delivered at other destination address different than his permanent address mentioned in his master data and in the invoice ,please how to make the distination address and make it appear ,please give me paths
thanks,

Hi
As your customer needs the material should be delivered to another destination address,in customer master record->general data tab->maintain contact details.
Second option is maintain another ship to party and bill to party to the customer with the address where the material has to be delivered.
Regards
Srinath

Specific Destination Address Lookup?

Similar Messages

Maybe you are looking for