Specific E-mail with links causing freeze using Mail

My wife is getting newsletter style e-mail from Better Homes and Gardens that contain links to pictures and other websites. These pictures only appear if internet access is connected so I believe that they are links that only are active once the mail is selected. If the internet is off, the space for the photos is blank.
I have isolated the problem to these specific e-mail messages that once selected, start some process of internet activity that causes the entire system to freeze and I get the beachball. If I don't click on the message, everything is fine. If I then turn off the internet access and open that message I can read it but there are no pictures or links. And the system continues to work fine. If I leave the internet on and click on the message, it opens with the links and I can see pictures etc., BUT as I continue to read the message the computer will freeze up within 20 seconds. If I try to click on any links within the message the computer freezes almost instantly. Also, if I quickly get out of the message and try to view a different message from any other sender that also contains links, all the links and photos become unavailable. And within a couple seconds the computer is locked up.
From watching my internet access speed monitor and listening to the hard drive it appears that the message is initiating some internet access or hard drive activity that interupts other mail functions and locks up the machine.
Anyone know how to troubleshoot this further? Does it help to look at the message in it's raw coded form? What would I look for?
Thanks,
Curtis

You know, I expected an answer like; "Your parental control can't be used like that. Its just a program, so it will try to block adult sites, or block unsecure connections. Like AOL mail for example. If you want her to access the school mail, then you'll just have to allow unrestricted access to the web. You can still monitor her web browsing. As for gmail, some email sites are able to be accessed even with the parental controls turned on."
I even expected some arrogant replies like Carolyn's. Telling me how to access gmail.
Thanks for nothing!
Message was edited by: TMcClain

Similar Messages

Problem with linking PDF documents using named destinations

Linking from one PDF document to another PDF document using named destinations viewed in Reader works great but once the documents are viewed inside a browser environment the link will only open the go to document and will not go to the named destination.
If I make the links using the page number - yes they will work perfectly in the browser. But my problem is that the documents may change in the future and the links may be on differnt pages, so I need to use named destinations to bring me to the page of the PDF they are on.
Any suggestions? I need them to work in IE.
Thanks

You can link to a named destination with a URL. This might work better in
your case... To do it use the following format:
http://example.org/doc.pdf#nameddest=Chapter6

Creating publishing page in specific folder and with custom page layout using JSOM

Hi!
I have a site collection under my root, in which I have a page library with a folder inside. I want to create a publishing page inside the folder using JSOM. The API provides the following information on the three possible ways of how you can create a publishing
page.
PublishingPageInformation with all defaults.
PublishingPageInformation.Name and PublishingPageInformation.PageLayoutListItem.
PublishingPageInformation.Name, PublishingPageInformation.PageLayoutListItem and PublishingPageInformation.Folder.
Source - SP.Publishing.PublishingPageInformation Properties (sp.publishing)
Since I want to create the page in a specific folder in the page library, I have to go for the last option.
I have a function call chain that look as follows:
getLanguageID(webUrl, languageID)
.then(function(resolveVal) {
language = resolveVal;
return checkPageExist();
.then(getEditorialNewsFolderJSOM)
.then(getAssociatedPageLayoutListItem)
.then(addPublishingPage)
The first two methods,
getEditorialNewsFolderJSOM
getAssociatedPageLayoutListItem
fetches the required data as SP.Folder- and SP.ListItem-objects.
The problem occurs when
addPublishingPage
is called. This method, in turns calls this function.
var pageInfo = new SP.Publishing.PublishingPageInformation();
pageInfo.set_name(publishPage.title);
pageInfo.set_pageLayoutListItem(pageLayoutListItem);
pageInfo.set_folder(editorialNewsFolder);
pageCreationContext.newPage = pubWeb.addPublishingPage(pageInfo);
clientContext.load(pageCreationContext.newPage);
clientContext.executeQueryAsync(function() {
publishPage.isPageCheckOut = true;
resolve();
}, function(error) {
reject(precio.intranet.resource.errCreateContent_addPublishPage);
The error happens when this function is called with the page information object.
SP.Publishing.PublishingWeb.addPublishingPage(pageInformation)
Error:
Cannot read property '$2t_0' of undefined
and it happens in SP.Runtime.js.
I've tried this
sample code from the MSDN-team, and added the pagelayout and folder properties, but it renders the same error.
Creating a page directly in the page library with a blank SP.PublishingPageInformation object works perfectly fine!
What could possibly be wrong? The error isn't something that I can debug myself since it happens in SP.Runtime.js, and the documentation for this is very sparse!
Any help on how to resolve this issue would be helpful!

Hi Vinay,
This may be useful:
https://blogs.oracle.com/jdevotnharvest/entry/remote_task_flow_vs_wsrp

Syncing with Link causes phone to get warm?

Hello, I have a STL-3 BB Z10 on ATT and I was syncing a lot of pictures using BB Link.
My phone warmed up quite a bit.
One temp app said 95, another said 100F???
This wasn't for a horribly long time.
Is this normal?
Is there any damage to my phone?
My laptop hibernated and I ended up turning my device off and removing the battery for safe measure.
Thoughts?
Edit: It was noticably warm where the phone was plugged in to the USB port (and around the battery). The rest of the phone wasn't warm at all.

Honda has an entire troubleshooting site for HandsFreeLink. It's available to technicians and the public alike. I wonder if your technician even bothered to look at the HFL site. Many techs seem to be unaware of Honda's own online help.
Go here:
http://handsfreelink.com/
Choose your vehicle and cell carrier. There is very extensive information available.
Despite the site not having "Honda" in its URL, it is operated by American Honda.
You did not say what model or year of Honda you have, otherwise I'd look things up for you.

Issues with iMac freezing using Mail, Safari, Chrome

I'm having issues with my iMac freezing, forcing me to hard restart my computer each time. I think I've had to powered down via power button altleast a twenty times today and yesterday. I've restarted 4 times just trying to finish this post
It seemed like I was only freezing using Safari at websites like facebook and youtube.com. So I switched to Chrome, which lasted a few hours until I started freezing on that as well.
I logged on as a Guest account and they seemed to be working fine. I thought Flash may be the issue so I re-installed but no dice. I emptied cache, cleared history from each browser, etc -- no help.
Then today I started freezing just using mail. While typing a message, auto correct attempted to correct a word and my system completely locked up from that.
I have plenty of hard drive space, RAM isn't an issue either.
Here's some of my system log just before one of my recent freezes:
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: addChildrenOfBookmark:withTabLocation:toMenu:includeUnreadRSSCounts: not found. (unknown Safari internal)
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: _leftTextMargin not found. (unknown Safari internal)
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: BrowserWindowController load error (0) - Unknown Safari Internal
Mar 12 16:19:11 --- last message repeated 12 times ---
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims loaded from: /Library/Application Support/Glims/PlugIns/Glims for Safari.plugin
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: -[BrowserDocument browserWindowController]: unrecognized selector sent to instance 0x7f9a6c00ecf0
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: Can't reload session: -[BrowserDocument browserWindowController]: unrecognized selector sent to instance 0x7f9a6c00ecf0
Mar 12 16:19:23 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:19:27 --- last message repeated 2 times ---
Mar 12 16:19:27 Ronnies-iMac.local Safari[1744]: Glims Error: BrowserWindowController not found - Unknown Safari Internal
Mar 12 16:19:29 --- last message repeated 5 times ---
Mar 12 16:19:29 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:19:56 --- last message repeated 32 times ---
Mar 12 16:19:56 Ronnies-iMac.local WebProcess[1746]: objc[1746]: Object 0x7faa5b41c710 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
Mar 12 16:20:20 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:20:34 --- last message repeated 5 times ---
Mar 12 16:20:34 Ronnies-iMac.local WebProcess[1746]: Unable to talk to lsboxd
Mar 12 16:20:35 Ronnies-iMac kernel[0]: Sandbox: sandboxd(1843) deny mach-lookup com.apple.coresymbolicationd
Mar 12 16:20:35 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:20:36 --- last message repeated 5 times ---
Mar 12 16:20:36 Ronnies-iMac.local sandboxd[1843] ([1746]): WebProcess(1746) deny mach-lookup com.apple.ls.boxd
Mar 12 16:20:39 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:21:09 --- last message repeated 11 times ---
I don't have much experience translating any of what I just pasted, any help would be greatly appreciated. Thank you!

I uninstalled the Glims plug-in on safari, and that's seemed to cure a little bit of the problem with safari. But I'm still getting hang-ups and freezes. I'm not even noticing a pattern anymore with which apps and so forth are causing it.
This is the log from a freeze that just occured at 22:59:
Mar 12 22:57:40 Ronnies-iMac.local mdworker[24584]: Unable to talk to lsboxd
Mar 12 22:57:40 Ronnies-iMac.local mdworker[24583]: Unable to talk to lsboxd
Mar 12 22:57:40 Ronnies-iMac.local sandboxd[24585] ([24584]): mdworker(24584) deny mach-lookup com.apple.ls.boxd
Mar 12 22:57:40 Ronnies-iMac.local sandboxd[24585] ([24583]): mdworker(24583) deny mach-lookup com.apple.ls.boxd
Mar 12 22:57:40 Ronnies-iMac kernel[0]: Sandbox: sandboxd(24585) deny mach-lookup com.apple.coresymbolicationd
Mar 12 23:00:22 Ronnies-iMac kernel[0]: disk0s2: I/O error.
Mar 12 23:00:22 Ronnies-iMac kernel[0]:
Mar 12 23:01:35 --- last message repeated 1 time ---
Mar 12 23:01:35 Ronnies-iMac kernel[0]: disk0s2: I/O error.
Mar 12 23:01:35 Ronnies-iMac kernel[0]:
Mar 12 23:01:36 --- last message repeated 1 time ---
Mar 12 23:01:35 Ronnies-iMac.local WindowServer[109]: CGXSetWindowTransformList: Invalid window 0x182
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowTransformsAtPlacement: Failed
Mar 12 23:01:35 Ronnies-iMac.local WindowServer[109]: CGXSetWindowTransform: Invalid window 0x182
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowTransformAtPlacement: Failed
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: find_shared_window: WID 386
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowListGlobalClipShape: Invalid window 0x182
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: find_shared_window: WID 386
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowListGlobalClipShape: Invalid window 0x182
Thanks again

When I flag an email with my gmail account using Apple's Mail App how do I flag and set a reminder that at a specific to follow

When I flag an email with my gmail account using Apple's Mail App how do I flag and set a reminder that at a specific to time to follow up with that email ?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

Using Links withing AW causes it to crash!

Every so often (more than I want) when I link to documents withing Appleworks. AW's crashes. And this is the only problem I have with Links. Sometimes it does it when I have the Links palette open. Or simply clicking the link icon in the bar.
Any suggestions? I do have alot of links. Wish I could make iCal and AW's work together.
Donald
iMac G5 Mac OS X (10.4.8)

If you've restored as new and not used ANY backup, and you still have the issue, then you'll need to bring your phone in to Apple for evaluation.

How can I open an app from an e-mail link that is associated with link.

I get e-mails with links in them all the time (from forms, online shopping, etc). Some of those links are for websites that have an iphone app associated with them (especially forums). When I click on the link it tells me as much, and if I click "ok" to that dialog, it takes me to the App Store and to that specific App, where I can download it. Even when I have that app installed, rather than taking me to that app when I click on the link, I get the dialog again telling me that there is an app associated with their website (which I already know because I have the app). Is there any way to get these links to open in the associated App, rather than trying to open them up in the browser?

This question has been answered before, see the page linked below:
https://discussions.apple.com/message/15123175#15123175

Having trouble with links to specific destinations in pdfs

I'm trying to create links from a web page to specific locations (destinations) in a pdf. I make the destinations in Acrobat, then I create the links in the web page (for example, userguide.pdf#intro), and they work perfectly in IE and Opera but not in Firefox. When I try these links in Firefox, it links to the pdf, but to the wrong place (usually the top of the pdf, but sometimes other places too). This has happened on two different computers, too.
Someone has recently suggested that it may not be a Firefox problem after all, but a Reader problem--specifically, a problem with the Reader plug-in we have on Firefox. Does anyone have any insight on this?

Hi,
That usually means that either the Domain name or the Folder is incorrectly specified. Please see https://helpx.adobe.com/muse/using/uploading-site-third-party-hosting.html for an explanation of these fields.
What values are you entering in these fields? Did Upload to FTP host work for you in previous versions of Muse? Are you using the same settings as before?
Abhishek

I used to send a link from safari using mail. Suddenly i cannot do this anymore.I have checked all the details but nothing will work

I have always managed to send link from safari using mail Suddenly I no longer can do this and mail just sits with the message in outbox. I changed nothing and all the settings look the same. Very frustrating please can anyone help. I use an aol account with outgoing imap and incoming smtp port 587 with no check in ssl box. AOL will not help, and apple are not interested either. I find it frustrating when things that were working suddenly dont for no rason. I am running OSX 10.6.8 Thanks Tracy

http://support.mozilla.com/en-US/kb/Managing+file+types
Don't set Firefox for '''mailto'''. <br />
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

I am having trouble with the ipad2 freezing up causing me to restart the tablet. How can I fix this?

I am having trouble with the ipad2 freezing up causing me to restart the tablet. How can I fix this?

Doubt it is a Hardware issue...
If the Reset and the Restart have not Resolved the Issue...
Then the Next Step is a Restore...
Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

When I change the size of Firefox3.6.12 with 'Snap' ,Firefox freezes . I'm using the PC on Windows7 ultimate 64bit .

When I change the size of Firefox3.6.12 with 'Snap' ,Firefox freezes . I'm using the PC on Windows7 ultimate 64bit .

The most likely cause that your non-standard user agent that has ''Fedora/3.6.10-1.fc13'' is causing it:
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.10) Gecko/20100920 Fedora/3.6.10-1.fc13 Firefox/3.6.10 GTB7.1
* [[Web sites or add-ons incorrectly report incompatible browser]]
* http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
A standard UA of Firefox 3.6.13 on Linux looks like:
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13

How can I use Automator to open and save Word docs with links?

Hi-
I'm having trouble building a Workflow to open and save Word docs with links.
My Workflow so far:
1. Get Finder items
2. Copy Finder items (to new folder)
3. Rename selected items
4. Open selected items (Word docs)
Three problems occur.
The first is a Word 2004 problem -- I can't get the warning "This document has links in it; do you want to open it with/without updating the links" to go away (Unilke the Macro warning toggle capability, there is nothing in the Preferences for Word 2004 that addresses the links warning, as far as I can tell; any insight you can shed on this would be terrific.)
The second problem happens with Automator: if I manually accept the update of the first document's links, Automator opens that document but then halts completely, even though I've instructed it to open multiple documents.
The third problem I have is that there's no Finder action in Automator that allows me to save the document that's now open (as far as I can see).
Any suggestions for how to fix? If I can get this to work, and scheduled in iCal, it will be an unbelievable time saver.
Thanks,
Jeremy
PowerPC G5 Mac OS X (10.4.6)

Hi there Jeremy,
to do this you are going to have to add in some Run AppleScript steps...
These will rely on GUI Scripting. So first you need to activate GUI Scripting.
Now we need to add in a Run AppleScript action to the end of your workflow...
This will replace your current number 4 in the workflow (Open Selected...)
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run {input, parameters}
set allItems to every item of input
repeat with currItem in allItems
tell application "TextWrangler"
open currItem
end tell
activate application "TextWrangler"
tell application "System Events"
tell process "TextWrangler"
delay 2
--when the Word document is opened I have told it to press okay !
--I don't know what key you want it to press in the dialog box
keystroke return
delay 2
--save the doc
keystroke "s" using command down
delay 5
--close the doc
keystroke "w" using command down
end tell
end tell
end repeat
return input
end run</pre>
The above script should open each Word Document, press a button in the dialog box then do a save and then close the doc...then loop through the rest of them.
You need to replace the name Text Wrangler with Microsoft Word (or whatever it is called!), I don't have it on my Mac.
You will have to let me know what button needs pressing in the first dialog, if it isn't the 'highlighted ' one then we will have to amend the script...
regards
Ric

How to use PDF files with links to other PDF Files

How to use a PDF file with links to other PDF files that have been transferred to the same folder

Are you using a mouse, or a trackpad on a laptop? Either way, your cursor is usually an arrow, right? And presumably it's working/moving MOST of the time, otherwise you wouldn't be able to do anything?
For example, can you move the cursor arrow to the "Annotate" tool to click on it and go into Annotate mode? If so, can you click on the text tool? If so, does the cursor change to a crosshairs? At what point can you NOT move the cursor around the screen?
Matt

Specific E-mail with links causing freeze using Mail

Similar Messages

Maybe you are looking for