Specific Number range from a set of available number ranges - logic

Hi,
I have a range with me in one work area like 60000130 to 60000140.
In one more internal table I have data like 90000130 to 90000134
                                                            60000130 to 90000400
                                                            80000130 to 80000134
                                                            20000130 to 20000134
                                                            10000130 to 10000134
Any better logic to search whether the given work area is there in the internal table or not.
Thanks

better than what?
what is the requirement? is case 'OK' when one value is in both, or do you need a total overlap?
we need more info and a more spezialized question.

Similar Messages

  • CC01 how can i choice a specific number range ?

    Dear
    In trx. OS53 i have defined two different internal number range object for change master  record.
    When I create a new change master how can I choice a specific number range ?
    Thanks.

    Hello,
    If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
    object used is AENNR and where in you can assign a common number range group and it will be used for creating change
    numbers of both these types.It's not as like the production order type where you can link a different number ange for each
    order type.
    In the standard SAP  to set of number range (one internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal number range,where during CC01 without any value for the field change number you can proceed.When creating through CC31 you can make use of external number range by giving the change number as the input and you save the data.
    Hope the information is useful
    Regards

  • Blocking Texts but allow phone calls from specific number?

    I have done some research but have not found what I'm looking for.
    I would like to be able to block a specific number from sending me text messages but I would still like to be able to receive phone calls from them.  It seems to be a unique situation.  I'm not sure if it is something Verizon can handle or if it's available in a third party App?  Thanks for any info you can provide.  I have an HTC Droid Incredible if that matters.

    I know that the free number blocking offered by Verizon Wireless will block both calls and texts from the blocked numbers.
    There might be something in the Play Store, but I'm not aware of any specific applications.

  • Have to maintain a specific number apart from material number in MMR

    HI All,
    We have a specific number(X) for some materials that we want to enter in a material master, and when we create a sales order that number(X) along with material number should populate in sales order.
    is there any field provided by sap to fulfill this requirement.

    There is no standard SAP fields provided to handle your requirements in the material master.
    You may need to use any of the unused fields in the material master. Following options I could think of;
    1) Use of Old material number field (MARA-BISMT). But this field will not flow into sales order. You may go with an enhancement to add this field in the sales order -> item level.
    2) Use of basic text or sales text from the material master. You need to add addtiional text type in sales order -> item text level in t.code VOTXN. By this way, when a number is maintained in the material master text field, this will automatically gets copied into sales orders.
    3) Use of EAN/UPC field (MEAN-EAN11) field. I am not in favor of using this field as this may be needed in other purposes like electronic transmission of data with government entites. If this field is not used in your business, you can think of this also.
    Using any of the above may eventually need development of customized report for your final reporting requirement. I am not sure whether any standard report will provide the details on what you are looking for.
    Regards,

  • Need to block incomimg from specific number

    I recently bought z10 and I need the help to block incoming from specific number. Thanks

    The Z 10 can only block All calls but there are 2 Apps for this in BlackBerry World, one paid and one free, see links.
    http://appworld.blackberry.com/webstore/content/40611894/?lang=en&countrycode=CA
    http://appworld.blackberry.com/webstore/content/25938882/?lang=en&countrycode=CA
    You may have to go to the bottom of the page and change the Country, however you can use your phone and go to BlackBerry World.

  • Can we maintain role specific number ranges?

    Can we maintain role specific number ranges in sapcrm..ex i want to give number range between 0-100 to role sold-to-party. is this possible ?
    Thanks and Regards,
    Ravi

    Hi Ravi,
    You cannot maintain an explicit relationship between the number ranges in CRM and roles.
    To configure number ranges you have to define groupings in CRM.
    While you create your BP, it is this point of time when you have to specified the grouping you want to use (indirectly the number range assigned to it). This will decide the number for the BP.
    Best Regards,
    Pratik Patel
    <b>Reward with POints!</b>

  • I am not receiving txt from one specific number. It is not blocked and she is receiving my txt ???

    I am not receiving txt from one specific number. It is not blocked and she is receiving my txt ???

    Contact your carrier... and have her contact hers. Assuming they are SMS/MMS messages, that is. SMS and MMS are carrier features. Note that MMS messaging requires a cellular data connection.

  • IPhone crashes dialing or receiving a call from a specific number

    This problem i've had for a while.
    Basically when i receive or make a call to a specific number ie (0191420**) my iPhone becomes unresponsive with the green incall bar across the top when i make the call and a complete crash when receiving it, although it logs the call as a missed call when the iPhone is restarted. I cant end the call until i restart the phone.
    Originally the number was a business contact in my address book contacts, then, when i started getting the problem, I deleted the contact thinking it was corrupt. It didn't make any difference.
    All my contacts are synced over mobileme and this contact was deleted over all my devices, powerbook, iPhone and iMac.
    But still when i dial or receive this number and only this number the phone locks up straight away.
    It started on my iPhone 3G then when i synced my new iPhone 3GS the problems continued even over a complete restore.
    I'm thinking its something to do with the contacts list file but don't know how to correct it with out deleting all my contacts which isn't an option.
    I've searched all the forums but nothing is mentioned about this specific issue.

    Hi Macintoad,
    I think I had the exact problem as what you are having. Having a greenbar on top while making call, and can not press any button, also the Iphone screen is blinking while a call is comming from that number and ontop of this, the contact name wont display on outgoing/incoming sms messages.
    I did manage to fix it by doing this, hope this also works for you..
    Backup all contact details to computer - address book.
    Delete that specific contact detail (Hopefully you don't have too many contacts causing this problem - I only had 1 number causing this)from both your computer(s), and mobile me.
    Add back all contact details from address book to your Iphone - I only add contacts, without any other settings (I had to reinstall all apps).
    Add manually that number back to the phone, and then sync back to computer/mobileme.
    Please let me know if this works...
    Good luck!

  • My status is set to available, but nobody can see me on their buddy lists, therefore I must initiate all conversations and video chats. How can I fix this? I am not on invisible and am not logged in from anywhere else.

    My status is set to available, but nobody can see me on their buddy lists, therefore I must initiate all conversations and video chats. How can I fix this? I am not on invisible and am not logged in from anywhere else.

    Hi
    It would be helpful to know which iChat version and what type of Account you have ?
    9:33 PM      Monday; August 20, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Sync with Outlook ONLY for a specific date range

    I have a Zire 31 that I'm syncing with Outlook via latest Palm Desktop/HotSync.   I did just install the latest conduit.
    I was getting several repeating calendar entries that were not syncing with the Zire (annual birthdays, etc.) - turns out that they did not have an "end-date" specified when created in Outlook.  Creating an end-date solved the problem.
    However - I would like to know if it is possible to specify a certain date range for the device to sync (e.g., sync calendar only for years 2007 through 2050, or in other words sync from 1 year ago to 50 years in future, etc...)
    I recall specifying this once years ago, but I may have been using a third party to sync with Lotus Notes at the time.  I'm wondering if this option is also available with syncing directly with Outlook using HotSync???  I can't imagine it's not, but I can't find where you specify it.
    One more interesting note:  while my Zire 31 had issues syncing those repeating calendar entries - my much older HandSpring Visor Deluxe syncs them no problem!  Go figure.
    Thanks much -
    Post relates to: Zire 31

    I'm not actually looking to purge old items.
    Rather - I would like to ONLY sync calendar entries between a specified range of dates.  For example - ONLY sync for calendar entries between Jan 1 2007 and Jan 1, 2050.
    the problem is that I have some repeating entries (birthdays, etc.) that are set up in Outlook with no end date.  Apparently Palm/HotSync is having trouble syncing these (they don't show up at all - for any year.)
    One resolution is to apply an end-date for each repeating calendar entry.  However, this is just another step my wife needs to remember to do.  If you happen to forget to to this, then Hotsync will ignore that entry.  Fine if you realize that's happening, but if you forget and forget to check - you won't even know it didn't sync!
    The other possible resolution is to only have HotSync sync for a SPECIFIC date range - one that does not presumably go to infinity.  That is my question - how does one sync ONLY for a specific date range.  Has nothing to do with purging old entries.
    Thanks!!
    Post relates to: Zire 31

  • Looping a movie clip a specific number of times in Flash

    Does anyone know how to get a movie clip to loop a specific number of times in Flash? I know how to stop a movie clip from looping by using the this.stop (); command by placing the command in a separate Action Script layer, in a keyframe, inside of the movie clip's timeline. This allows the movie clip to play through once and then stop. But I need for the movie clip to loop more than once, maybe 2 or 3 times, and then go back to the main timeline. Does anyone know the code for this?
    Also, is it possible to place a pause (I'm guessing, maybe by using a timer of some type?) between the loops, so that the movie will pause a couple of seconds before it loops again and then stop? Please note I do not need the movie clip to stop when there's an event like a rollover or anything. I just need it to play a couple of times, pause between plays and then stop and go back to the main timeline. Please let me know if anyone can help.
    Thanks,
    Sarah
    P.S. Is there a good, easy to use, reference book anyone can recommend for creating specific things in Flash using Action Script? Do you guys have a favorite for beginners like me?

    You can use a variable to keep count of how many times you loop, and until it exceeds a particulr value (2 or 3) you execute a setTimeout() call that waits for however long you want to delay and then tells the movieclip to gotoAndPlay(1).
    So in the first frame you would establish the counting variable...
    var count;
    if(count == undefined){ // only set it to 0 once
    count = 0;
    and in the last frame you would do your incrementing and control....
    stop();
    count += 1;
    if(count < 3){
    setTimeout(waitABit, 2000); // call function in 2 secs
    function waitABit(){
    gotoAndPlay(1);

  • A set from a set of sampled data from a thickness sensor.

    A  set from a set of sampled data from a thickness sensor.
    The samples are stored in an appropriate array of up to 100 elements.
    The values represent the depth of the insulation around a particular cable.
    The thickness can vary from 0-4mm represented by a corresponding real value
    stored in the array. as long as the depth is between 1 and 4 mm the cable
    falls within the allowable specification however if it falls below 1mm it is
    deemed to be too thin.
    Design a VI that will identify the number of thin values and display as a
    percentage of total number of samples.
    The front panel  have the must have the following:
    An array of controls holding the sampled values.
    An indicator holding the percentage of thin values.
    Attachments:
    Test Data 1.vi ‏14 KB

    hi there, this is Faddi, I am doing the same assignment as the one you poested earlier!! I know its a very basic one, but i need your help in doin the second task asap PLEASE!! IF you could please...its as follows:
    This is to be designed to work on a set of sampled data from a thickness sensor. The samples are stored in an appropriate array of up to 100 elements. The values represent the depth of the insulation around a particular cable. The thickness can vary from 0- 4 mm represented by a corresponding real value stored in the array. As long as the depth is between 1 and 4 mm the cable falls within the allowable specification however if it falls below 1 mm it is deemed to be too thin.  Specification 1
     To design a VI that will identify the number of thin values and display as a percentage of the total number of samples. The front panel must have the following:           An array of controls holding the sampled values.           An indicator holding the percentage of thin values.  Specification 2
     Thin values tend to appear as sections or patches along the length of the cable i.e. values of less than 1 mm stored in successive array elements. To design a VI that will meet specification 1 and will also calculate the number of these thin patches. The front panel will now have an extra indicator to display the number of patches.  
    Thankyou

  • Policies on specific time range

    Does Ironport has in the plan to set the policies to be applied in a specific time ranges, like apply a specific policy on morning then set another one at night?
    This feature is in the websense & smart filter and should be there in Ironport

    Moutaz,
    The WSA supports time ranges on versions 5.6.0+. This version is currently available to all customers upon request. The unofficial ETA for the 5.6 release to be generally available is within the next month.

  • Make a number in column A always return a different specific number in column B

    I'm trying to create a retirement calculator.
    How do I set it up so that no matter where a specific number appears in column A, column B, same row, always returns a different specific number.
    This second number cannot be derived from the first mathematically.
    example:
    Column A your current age is entered in the first cell.
    Column B is the Life Expectency Factor (LEF). Before age 70 it is 0.  At age 70 that number is 24.7, at 71 it is 26.4 etc.
    Column C returns the Minimum Required Distribution (How much one has to withdraw) (B * $IRA = $MinDist)
    Depending on the age in the first cell of column A, age 70 could be in any row.
    How can I have the LEF in column B move with the age so that no matter in which row age 70 may appear in column A, that row in column B always returns 24.7 and age 71 always returns 26.4... and on.
    No matter which row 70 is in, 24.7 is always next to it in the same row. This will go from 70 to 100 each with a specific LEF next to it.
    Thanks

    Hi Les,
    Setup a Lookup table listing the LEF in column B beside each age in column A. Assuming one header row, start with 0 and 0 in A2 and B2, 70 and 24.7 in A3 and B3, etc.
    On your Main table, enter the formula below in the first data cell of Main::column B (B2, again assuming a single header row for labels). Fill the formula down to the end of the table.
    Main::B2: =LOOKUP(A,Lookup::$A,Lookup::$B)
    Fill the formula to the end of column B
    Numbers on the lookup table on the right are from the (US) government Social Security Administration Actuarial Life Table, and may not (do not, for the two examples in your post) agree with those you are using.
    Regards,
    Barry

  • Route calls to specific number based on Date and Time

    Hi,
    UCCX 8.5.1.11001-22
    I am trying to create a script that will route calls to a specific number after-hours.  The only catch is the number changes every week and rotates among 4 or 5 people.  I have seen several scripts and xml documents up that give me a good start but I just cant seem to figure out the process with the xml document and call flow of this one.  I do realize this is basically a programing question but if you could get me headed in the right direction it would help.
    I am no stranger to UCCX scripting but a novice to xml integration.

    I'm not sure what the SM toolkit is.  Could you explain it or provide a link?
    If you and your collegaue are admins, then I would say skip the overhead of an XML document for now and just manage the schedule in a subflow.
    Example:
    Subflow Variables
    String oncall_number_current = ""String oncall_number_avholloway = "916125551212"String oncall_number_jsmith = "916125551313"String oncall_number_default = "916125551000"Date today = D[now]
    Subflow Script
    StartSwitch int (today.month)  January (value == 1)
        /* In Jan, from the first to the fifteenth, Anthony is on call */    If (today.date >= 1 && today.date <= 15)
          True        Set oncall_number_current = oncall_number_avholloway
            Goto End of Script      False
        /* In Jan, from the sixthteenth to the thirty-first, John is on call */    If (today.date >= 16 && today.date <= 31)
          True        Set oncall_number_current = oncall_number_jsmith
            Goto End of Script      False
      Febraury (value == 2)    /* In Feb, from the first to the sixth, Anthony is on call */
        If (today.date >= 1 && today.date <= 6)      True
            Set oncall_number_current = oncall_number_avholloway        Goto End of Script
          False    /* In Feb, on the seventh, from midnight to noon, Anthony is on call */
        If (today.date == 7 && today.hod >= 0 && today.hod <= 11)      True
            Set oncall_number_current = oncall_number_avholloway        Goto End of Script
          False    /* In Feb, on the seventh, from noon to midnight, John is on call */
        If (today.date == 6 && today.hod >= 12 && today.hod <= 23)      True
            Set oncall_number_current = oncall_number_jsmith        Goto End of Script
          False    /* In Feb, from the eighth to the twenty-nineth, John is on call */
        If (today.date >= 8 && today.date <= 29)      True
            Set oncall_number_current = oncall_number_jsmith        Goto End of Script
          False  March (value == 3)
        ..etc, etc, building out the whole year...  Default
        /* Set the default on call number */    Set oncall_number_current = oncall_number_default
        Goto End of ScriptLabel End of Script
    End
    Main Script Variables
    String oncall_number = ""
    Main Script Script
    ...oncall_number = Call Subflow (SCRIPT[oncall-sublfow.aef], oncall_number_current)Call Redirect (--Triggering Contact--, oncall_number)...
    In the example of January 3rd, the subflow would execute 4 steps.  That's not much at all.  Of course you would only call the subflow if the hours called for it.  This would eliminate unecessary calls to the subflow.
    To update the oncall, just update the script, save, upload, refresh, and then refresh the apps which call it.  No down time at all!
    I hope that makes sense.  If not, ask questions.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

Maybe you are looking for