Specific scenario in PROFIT CENTER ACCOUNTING
Can someone tell me his/her experience about a specific scenario in Profit Center Accounting where he/she faced a problem and did something special in configuration/development in order to move from legacy to SAP system.
I would appreciate the help and award suitable points.
Thanks
Chandan
Hi
Below are some steps in the SAP transfer pricing:
Define transfer prices
Define transfer prices as surcharges on valuation prices
Plan transfer price effects on results by valuation of quantities
Valuate goods movements with transfer prices
Perform manual postings and corrections
Analyze results using reports
More on below link
http://help.sap.com/saphelp_45b/helpdata/EN/eb/13736a43c411d1896f0000e8322d00/frameset.html
SKS
Similar Messages
-
Error Message - No ALE scenario active in Profit Center Accounting
Hi Friends ,
I am uploading Profitcenter master using LSMW Bapi method . I am getting error message " Getting error "No ALE scenario active in Profit Center Accounting" in step - IDOC Processing of LSMW .
I hope i am missing some specific settings for this requirement , any suggestions willl be highly appreciated .
yah i have chekced the same query in sdn , but did not find any solution to that so i am posting this query .
Thanks
PrabhduttaResolved by BDC .
-
Urgent :Getting error "No ALE scenario active in Profit Center Accounting"
Hi Experts
I am working on a LSWM project ,which uses BAPI BAPI_PROFITCENTER_CREATE for upload of data,but I am facing a strange problem during the IDOC posting the error "No ALE scenario active in Profit Center Accounting" is shown and the status of IDOC goes to 51.
I have done all the ALE setting required for LSMW like File port ,partner type and partner number.
Please help me to solve this error.
Thanks
-Mitesh
Message was edited by:
Mitesh ParekhHi,
Refer This SDN Blog, which gives you steps in detail....
LSMW Step by Step Guide: Legacy System Migration Workbench is an R/3 Based tool for data transfer from legacy to R/3 for one time or periodic transfer.
Basic technique is Import data from Spreadsheet / Sequential file, convert from source format to target format and import into R/3 database. LSMW not part of standard R/3, if we need this product email [email protected]
Advantages of LSMW:
Most of the functions are within R/3, hence platform independence.
Quality and data consistency due to standard import techniques.
Data mapping and conversion rules are reusable across projects.
A variety of technical possibilities of data conversion.
Generation of the conversion program on the basis of defined rules
Interface for data in spreadsheet format.
Creation of data migration objects on the basis of recorded transactions.
Charge-free for SAP customers and partners.
Working With LSMW:
Use TCODE LSMW
Objects of LSMW:
Project ID with max of 10 char to Name the data transfer project.
Subproject Used as further structuring attribute.
Object ID with max of 10 Characters, to name the Business object .
Project can have multiple sub projects and subprojects can have multiple objects.
Project documentation displays any documentation maintained for individual pop ups and processing steps
User Guide: Clicking on Enter leads to interactive user guide which displays the Project name, sub project name and object to be created.
Object type and import techniques:
Standard Batch / Direct input.
Batch Input Recording
o If no standard programs available
o To reduce number of target fields.
o Only for fixed screen sequence.
BAPI
IDOC
o Settings and preparations needed for each project
Preparations for IDOC inbound processing:
Choose settings -> IDOC inbound processing in LSMW
Set up File port for file transfer, create port using WE21.
Additionally set up RFC port for submitting data packages directly to function module IDoc_Inbound_Asynchronous, without creating a file during data conversion.
Setup partner type (SAP recommended US) using WE44.
Maintain partner number using WE20.
Activate IDOC inbound processing.
Verify workflow customizing.
Steps in creating LSMW Project:
Maintain attributes choose the import method.
Maintain source structure/s with or without hierarchical relations. (Header, Detail)
Maintain source fields for the source structures. Possible field types C,N,X, date, amount and packed filed with decimal places.
Fields can be maintained individually or in table form or copy from other sources using upload from a text file
Maintain relationship between source and target structures.
Maintain Field mapping and conversion rules
For each Target field the following information is displayed:
o Field description
o Assigned source fields (if any)
o Rule type (fixed value, translation etc.)
o Coding.
o Some fields are preset by the system & are marked with Default setting.
Maintain Fixed values, translations, user defined routines Here reusable rules can be processed like assigning fixed values, translation definition etc.
Specify Files
o Legacy data location on PC / application server
o File for read data ( extension .lsm.read)
o File for converted data (extension .lsm.conv)
Assign Files to defined source structures
Read data Can process all the data or part of data by specifying from / to transaction numbers.
Display read data To verify the input data being read
Convert Data Data conversion happens here, if data conversion program is not up to date, it gets regenerated automatically.
Display converted data To verify the converted data
Import Data Based on the object type selected
Standard Batch input or Recording
o Generate Batch input session
o Run Batch input session
Standard Direct input session
o Direct input program or direct input transaction is called
BAPI / IDOC Technique:
IDOC creation
o Information packages from the converted data are stored on R/3 Database.
o system assigns a number to every IDOC.
o The file of converted data is deleted.
IDOC processing
o IDOCS created are posted to the corresponding application program.
o Application program checks data and posts in the application database.
Finally Transport LSMW Projects:
R/3 Transport system
o Extras ->Create change request
o Change request can be exported/imported using CTS
Export Project
o Select / Deselect part / entire project & export to another R/3 system
Import Project
o Exported mapping / rules can be imported through PC file
o Existing Project data gets overwritten
o Prevent overwriting by using
Import under different name
Presetting for Inbound IDOC processing not transportable.
<b>One Last thing, Check in BD64 is the Distribution model is Active for Profit Center</b>.
Cheers...
Santosh.D
<i><b>Mark All the Usefull Answers.</b></i> -
Profit center accounting in ECC 6.0 with Document Splitting
HI
We are working on a project in ECC 6.0 with document splitting functionality. I would like to know how to transfer Payables/Receivables, Materials, Assets in Profit center accounting. I have done necessary configuration but some how results are not getting updated in PCA. Is there any specific report required to see result or standard reports gives the results.
I have assigned Accounts in 3KEH and their default assingment in 3KEI kindly tell me how to proceed about it.
I have done these configuration so far
Define Ledgers for General Ledger Accounting
Assign Scenarios and Customer Fields to Ledgers
Classify G/L Accounts for Document Splitting
Classify Document Types for Document Splitting
Define Zero-Balance Clearing Account for profit center
Define Document Splitting Characteristics for General Ledger Accounting
Activate Document Splitting
Apart from these is there any other configuration kindly let me know
Get points
Regards
GeetaHi,
I am using S_ALR_87012284 to generate my financial statements. But whenever I provide a profit center value in the dynamic selection screen, i will encounter the FAGL_DB007 error.
The error message reads -->
Invalid selection when reading balances in new General Ledger Accounting
Message no. FAGL_DB007
Diagnosis
Read access to balances of New General Ledger Accounting can only be granted to selection conditions for fields in table &V1.
System Response
No balances can be read.
Procedure
Check the selection criteria by calling up the transaction.
Anyway I can overcome this error?
Rgds,
Bryan Goh -
Profit center accounting totals records report 2KEE:
Hi,
When I am executing Profit center accounting totals records report 2KEE for a specific selection as below,
Record type: 0
Version: 0
Controlling area:
Company code:
Posting period :1
Fiscal year:2007
Profit center: 1000dummy
Account:
After report is generated and if drill down further, line items total is not matching with the report page, breakup gives different values but not the report value.
I tried report even after implementing OSS 892779 and 952263 but the result is same. I am using 4.7
Request your help in this.
Regards,
Lakshmana RaoDear Eugene,
What do you mean? What is the report? -
Profit Center Accounting-Transfer of Accounts payable/Receivable
Dear All,
in our company SAP was implemented in 2005 . Now we configurd PCA and transfering the Ending balance of Accounts Payable/Recivable ( Transaction 1KEK). System only select the invoices which were posted in last month ( Feb,2009) and ignore all the open invoices which were posted before Feb,2009.
Please advise me, How I'm able to post the ending balance of Accounts payable/Recivable on respective profit center.Hi
The transaction 1KEK is specific to a period. The first box that you would provide the period and then the year. Subsequently you will be providing the fiscal year. So only the entries for Feb 2009 will be going over to PCA. If there were any entries subsequent to the execution of 1KEK, you need to execute it again in order that the delta entries make it to PCA.
You transfer payables and receivables to Profit Center Accounting in the course of normal period‑closing activities.You can transfer payables and receivables as often as you wish, since the system deletes previously transferred data before each new transfer.
Hope this clarifies. Else please get back.
Karthik -
DOC Splitting in New GL and Profit center accounting activation
Dear All,
I am in a dilemma regarding the following -
We are activating doc splitting with profit center and segment as characteristics.
1) While maintaining Controlling area settings(OKKP) - do we need to activate "Profit Center Accounting" component?
2) Similarly, in IMG-Controlling - Profit Center Accounting- Basic Settings-Controlling Area Settings-Maintain Controlling Area Settings (0ke5), do we need to maintain any settings?
I am of the opinion that ,based on the SAP Note - 826357, that we need not activate PC accounting as it is built into New GL Accounting.
I am also of the opinion, again based on the note, that we can use classic PC accounting, but the note recommends and I quote
we do not recommend you do this on a long-term basis due to the increased data volume and the increased time and effort required, and in the case of active document splitting, the update response changes.
But I am not able to come to a conclusion.
In earlier implementations, I activated PC accounting in OKK5 in New GL doc split scenario. So keeping that in mind, pl guide me.
Thanks & regards,
GovHi
Please set the Profit Center Accounting with Controlling Area.
SPRO->CONTROLLING-->PROFIT CENTER ACCOUNTING -->CONTROLLING AREA SETTING -->MAINTAIN CONTROLLING AREA -
Activate Profit Center Accounting with Splitter in SPL / New GL
...............New G/L go live date.....................Migration Point (after this cannot post back)
...............I<--old G/L--
>I
...............I..(using old G/L till Migration).........I
I--I>---
...............I...................................................I
...............I...................................................I
...............07/01/2011
...............PCA (activating it with splitter)
We are Public Sector and are on ECC 6.0, we have been splitting Document based on Business Area and Fund. Before migrating to New GL functionality, we are also thinking to use the feature of document splitting with characteristic profit center. To do that we are thinking of the two following scenarios, but want to understand the possibility, the benefits and impact on the system
Scenario A. Activating Profit Center Accounting with Splitter in Special Purpose Ledger on the GO-live date and populate Profit Center field in Classical G/L.
Scenario B. Activating Profit Center Accounting with Splitter In New G/L on the GO-live date and populate Profit Center field in New G/L.Yes, I understand that (ours too). Based on your diagram, migration will be some time after 7/1/2011.
Actually, I think what SAP recommends is complete migration before opening the new FY for posting. In any case, if you want to add a new split characteristic and you are already using SPL, I think it is better to add it to SPL before NewGL migration because SAP handles migration with SPL and without SPL (from classic GL) differently. With SPL is a lot more straight forward.
Regards,
Ming -
Internal-Profit Center Accounts Receivables/Payables
Dear All,
Within a single Company Code, Profit Center 1 is assigned to Plant 1 while Profit Center 2 is assigned to Plant 2. To track inter-divisional revenues and costs between Profit Center 1 & 2 during stock transfer, Transfer Pricing will be activated using Profit Center Valuation in Profit Center Accounting.
Only Legal Valaution is turned on in FI. No Profit Center Valuation will be turned in FI.
We understand that Inter-divisional Accounts Receivables/Payables can be generated for Profit Centers if these Profit Centers belong to 2 different company codes.
Thus we would like to clarify if Inter-divisional Accounts Receivables/Payables can be generated in the scenario within a Company Code where Profit Center is assigned to Plant 1 while Profit Center 2 is assigned to Plant 2?
Prompt respose is appreciated!
Million Thanks in Advance!Dear Suraj,
I realiee appreciate your prompt response.
I have been reading SAP HELP and forums. The internal-divisional AR/AP scenario between Profit Centers are usually between 2 Plants and 2 Company Codes.
We understand that we can Define Account Determination for Internal Goods Movements for P/L Accounts in PCA for Internal Revenues, Internal Change in Stock and Delivery from Profit Center.
Would you please give us some pointers where and how internal-divisional AR/AP between Profit Centers within a Company Code can be configured in IMG?
Regards
Edited by: wishy washy on Dec 3, 2008 11:01 PM
Edited by: wishy washy on Dec 3, 2008 11:03 PM -
New GL - Profit Center Accounting.
Hello,
My Client have implementaed New GL and Profit Center Accounting Scenario is activated. Document Splitting also activated and PC is made a zero balance and mendatory field.
My query is: how the distribution for the reconciliation account will work; for example, a vendor invoice is posted so the vendor line item will get the PC from the other line item. Here the PC is general Plant level PC now I want to distribute this posting to the vendor account to the other PC. How this can be done?
the same query for Asset and material reconcilition posting.
Please let me knwo if more information is required.
Regards,Hello,
Thanks for the reply.
in my company Plant and Profit center is mapped on one to one basis. now we are reengineering the profit center hierarchy as Plant and product group combination.
now come to the example the material purchase entry. Here the material is updated with the common profit center at plant level which we need to distrubute to the other profit center (which is created as product group and plant combination) in period end closing activities with the decided allocation %. This we are doing for generating Balance Sheet at Profit Center Level (which is now a combination Plant and Product Group)
Now I am not able to run Distribution with FAGLGA3*. Please guide how to run distribution for Reconciliation account like Vendor, Asset and Material.?
Please let me know if more information is requried.
Regards, -
Actual data flow of AR and AP line Items in profit center accounting
Hi all,
I was trying to configure profit center accounting.
1.I was not able to transfer accounts receivable and payable balances.Can any body help on this.
2.Also values are not flowing into customer and vendor reports in PCA
Regards
PratikshaThank you So much that was useful one.
Can you please tell me the values from customer and vendor flow into Profit centers.In reports like S_ALR_87013345 - Profit Centers: Customers (Transferred Periodically) values are not being posted
Waiting for answer
Thanks -
Report painter, Internal orders and profit center accounting
hi,
I want to do a report using data from internals orders (AUFNR) and profit center accounting (PRCTR).
I can make individual reports for internals orders (6O1, CCSS) and for profit center accounting (8a2, GPLCA) but I can't combinate data from internals orders and profit center accounting.
Is it possible make a report using report painter that show data of internals orders and profit center accounting.
All my internals orders have a profit center accounting.
Thanks in avanced[url] http://help.sap.com/saphelp_45b/helpdata/en/cc/36428394f311d2b47a006094b9b0a5/frameset.htm
this may be helpful
regards.
santhosh reddy -
Difference between Business area and profit center accounting
Hi Frnds,
Can any body explain about difference between business area and profit center accounting .Hi
Business area will have many profit centers. For example Vehicle is a business area in a company. Vehicle can be cars and Bikes etc. Here Vehicle is business area and Cars and Bike are profit centers. In broad Vehicle is a profit center. But as it has sub areas those are profit centers. So profit centers cannot be replaced with business area and vice versa. We can replace business area by Profit centre, only condition is that it should be in same controlling area. The business area is more like a business unit of a company. You can have multiple profit centers within a business area.
Main distinguish factor is that distribution and assessment in possible in profit center but not in business area.
One more distinction is that Business area need not be attached to any organisation structure. But profit centres can be created only under the controlling area. Business area can be across controlling area.
Business area concept is used for making stragic decisions by the management whereas the primary purpose of profit centre accounting is responsibility accounting.
http://help.sap.com/saphelp_erp2005/helpdata/en/ff/277203deea11d3b5b4006094b9b0a5/frameset.htm -
Origin Object Type for Plant Maintenance Orders in Profit Center Accounting
Hi,
I want to make a selection for plant maintenance orders in transaction KE5Z, report for line items in Profit Center Accounting. When checking possible input options for the selection field <b></b>Origing Object Type<b></b> the system shows value 15 for Maintenance Orders. However I discovered in our system the maintenance orders are reported as Origing Object Type 03, which is Overhead Orders according to the selection list. So I cannot distinguish between overhead orders and maintenance orders in this report.
What is the cause our maintenance orders are assigned to Origin Object Type 03 in stead of 15 and what is the customizing transaction to correct this ?Looks like, this is no longer supported. Refer to note 168004 and 102434.
Cause and prerequisites
These functions were not programmed to meet the above requirements.
As of Release 4.0, the object type is transferred directly.
Solution
Once you have implemented the advance correction. the origin object type 'Overhead cost order' (03) is assigned irrespective of what is the SCOPE for orders.
As a result of implementing this note or as of Release 4.6B, the order category distinguishes between overhead cost orders and production orders in the origin object type. In this case, the following origin object types result (as described above in 1.):
Order category 04 to 10, 40 => 04 (production order)
All other order categories => 03 (overhead cost order)
The logic that the origin object type was set depending on the object class (as described above in 2.) is no longer supported. The object class can be evaluated separately in Reporting. -
The corrections of this note refer in Release 4.0B to the corrections from Note 102434. -
Issue in Profit Center Accounting 4.7
Hello,
The System is on ERP 4.7 with Profit Center Accounting Active.
I have run 1KEK for transfer of receivables and payables.
When I execute report S_ALR_87013340 report the receivable value for the overseas customer cannot be viewed
However the line items do appear in the report S_ALR_87013344.
Can some one please explain why the discrepancy
Regards,
BHaviHi,
Check in 3KEH or FAGL3KEH, if some P.Cntr assignment is maintained..
Also let us know, whether 900000 is a Dummy profit center?
Regards,
SAPFICO
Maybe you are looking for
-
I set my iPhoto to save photos to a non-default location. Now I can't find my iPhoto albums in iTunes, even when looking in my non-default location in the "Sync Photos from" menu. How do I fix this?
-
Can't print after iTunes and Quicktime upgrade
I installed the upgrades to iTunes 7.1 and Quicktime 7.1.5. Now none of my applications can print to any of my printers. The behavior is that the print window appears normal, and I can "Save to pdf". When I click "Print" the appllication pops up an e
-
Unable to 'share' clips from iMovie 11 plse help
hi everyone. ive got a black macbook intel core 2 duo. i tried putting final cut pro x on there but it doesnt like it as the graphics card isnt compatible-after doing a google search...anyway- i have imovie 11. im unable to 'share' my footage once i
-
How to create an user input variable for customer exit variable? - BW3.5
Hi Guru, I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable: 1. Month: Current reporting month 2. Fiscal Year to Date 3. Project Year to Date Here I need 2 variable to d
-
Ms9 files export as jpg or bmp
Hello everybody, My problem and my question is: is it possible to export a circuit from Multisim9 as Bmp or jpg? Because I can´t print a Circuit at a DIN A3 scape. Without making a screenprint Quick reply much appriciated.