Specific Serial Num not appeared

Hi Friends
There was an Item (Finished Product), Serial Control enabled
It received from Work In Process and Serials generated during Receiving
At Transact Move Order Form from Inventory Resp. ,when i'm trying to Issue it against Sales Order ,at List of Values of Serial ,all serial number appears except two.
I tried again at Miscellaneous Transaction Form,the Problem appears also and Seriel LOV does not contain all the Serials
Thanks in advance
Regards
Amr Hussien

Apple doesn't keep track of mouse/trackpad serial numbers in that website.  They have a record that you bought it.

Similar Messages

  • Serial ports not appearing in MAX - VISA installed.

    Hi All,
    Had a rather strange issue today that I couldn't resolve with serial ports not appearing in MAX (and hence being inaccessible to LabVIEW). Under the windows device manager it shows 4 COM ports and I have verified with an external program that they are functioning correctly.
    I had the LabVIEW 2011 SP1 f2 runtime installed, DAQmx 9.6.1 and NI-VISA 5.3 (5.2 also didn't work).
    Things I have tried:
    - Updating VISA from 5.2 to 5.3
    - Reinstalling the COM port devices under device manager
    - Changing the COM port numbers
    - Verifying that the COM ports are functioning correctly
    - Tried adding a USB to Serial converter as a new COM port
    - Reinstalling MAX
    - Reinstalling NI-VISA
    - Reinstalling everything (reboot each time when prompted)
    - Resetting the hardware configuration from within MAX
    - Run installers / MAX as administrator (this is running from the local admin account)
    - Checked that NI-VISA appears under software in MAX
    - Repaired MAX/NI-VISA
    Is there anything else that could cause the COM ports not to appear in MAX when they appear (and work correctly) in device manager when a reinstall of NI VISA / MAX won't solve?
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets
    Solved!
    Go to Solution.

    I found the solution - it turns out that the serial ports were available to LabVIEW, they just didn't show up in MAX because installing just the runtime does not show the devices in MAX.
    Despite doing a lot of googling earlier, it didn't throw up this knowledgebase article until I searched for it under a different phrase - http://digital.ni.com/public.nsf/allkb/766FD80DAE42E52886256A0200619CFE?OpenDocument
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • SPED inbound delivery creation, serial num not getting copied from out delv

    We enabled SPED to create inbound delivery against outbound delivery
    We observed Serial numbers are not getting copied from outbound delivery to inbound deliver
    can some one help
    Moderator message:
    Locked. Reason: duplicate.
    The new post: STO GR against outbound delivery/inbound delivery
    Edited by: Csaba Szommer on Jan 9, 2012 4:16 PM

    Hello Mohammed,
    Go through these SAP Help Pages for Delivery Creation from SAP TM. It will help you to check where have you gone wrong is the setup.
    Creation of ERP Deliveries from SAP TM:
    ERP Logistics Integration - SAP Library
    Creation of Delivery Proposals:
    Creation of Delivery Proposals - ERP Logistics Integration - SAP Library
    Monitoring of Delivery Creation:
    Monitoring of Delivery Creation - ERP Logistics Integration - SAP Library
    Kindly let me know if it works, or else give me some more detail regarding your steps you are doing and your scenario. It might be helpful to understand and then I can provide you a solution.
    Thanks and best regards,
    Navin

  • Lightroom 4 serial numer not working for lightroom 5

    I downloaded the triel version of lightroom 5 and entered by lightroom 4 serial number and it has a x at the end and it is not taking it. Having read some of the other forums I thought all you had to do to updgrade was install and enter the 4 serial. Pleas let me know what I need to do to resovle this issue.

    We’ve had several questions around who is eligible for an upgrade to Lightroom 5.  Any Lightroom 1, 2 3, or 4 version of Lightroom, education editions included, can utilize the upgrade version of Lightroom 5.  The prior version of Lightroom does not need to be installed on the computer, however you will need the prior version serial number at the time of installation of Lightroom 5.  If the prior version is still installed on the computer, Lightroom 5 will automatically pick up that serial number so you don’t need to go digging through boxes or your email."
    You still have to pay for the upgrade. This says that LR5 will automatically read your LR4 serial number but you still have to buy a LR 5 serial number.

  • New Magic Mouse Serial Num Not recognised

    Just got my new magic mouse and when i type in the serial number on the support page it wont let me type in the full serial number what do i do

    Apple doesn't keep track of mouse/trackpad serial numbers in that website.  They have a record that you bought it.

  • Serial Numer not working??

    I don't know where else to get advice soon.
    I bought CS3 Wed Standard, installed it and entered the
    serial number and all worked fine.... for about 3 weeks and then
    yesterday I was working in DW and closed it and then a while later
    tried to open it and was faced with the screen asking for the
    serial number, which when I enter it says is invalid!!
    I tried to uninstall but got an error message. Tried to
    re-install and also got an error message - telling me to use the
    original disk which I was using.
    I also tried to use it in Demo mode but got another message
    saying that there is a problem with Demo mode.
    Please, and ideas. I have literally spent all day today
    trying to get help from Adobe but don't seem to get anywhere. Each
    link takes me somewhere and I end up eventually back where I
    started.

    Is there a possibility that you are using a Mac S/N on a PC,
    or vice-versa?
    How about using a Suite S/N on a standalone?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Romuba" <[email protected]> wrote in
    message
    news:fqrju2$k52$[email protected]..
    >I am absolutely sure - When I originally installed the
    software I copied
    >the
    > nmber from the email I received and pasted it into the
    boxes on the
    > initial
    > screen and it worked. Now when I do the same it shows
    that the number is
    > incorrect!
    >
    > What I want to know is why does this software suddenly
    require the serial
    > number? No other software I know does.
    >

  • I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    it is correct in this link;
    but in the https://supportprofile.apple.com/PramAddRegisterProduct.do
    the message indicate the (same) number is not valide

  • LabVIEW serial command does not appear to complete until I open a Hyperterm.

    I can command my device using hyperterm. However, the LabIEW command does not appear to complete. I issue the command in LabVIEW and then open the hyperterm to verify the command was recevied (status query). When I start the hyperterm session (with a carriage return), I get a response from the device stating that it is performing the requested action, and then (after 1-2s) a response stating that the action has completed. I have tried commanding using both the VISA protocol and the basic serial I/O. I have also tried , and as my termination character in LabVIEW.

    But are you explicitly sending the termination character from LabVIEW? Just setting the termchar applies only to read operations, not writes.
    If you want VISA to send the termchar for you on write operations, set the property "ASRL End Out" to "TermChar".
    And if you are appending the termchar manually to the strings you send, make sure your LabVIEW strings have the backslash codes view turned on so you're actually sending the right code (instead of sending an actual backslash code itself across the serial cable).
    Dan Mondrik
    National Instruments

  • DTW -- UDF does not appear in Serial Number

    Hi All,
    I am trying to update a UDF in serial number transaction table for GR PO. I have prepared a template where I have added a column at the end with the name of the column as defined in database. when I map these fields in DTW, I dont find this UDF in the list of serial number's columns. when I map the document header (GR PO), I am able to see the UDF of OPDN table but that does not happen for Serial number's mapping. any idea??? I am using 2005 B PL 44.
    thanks,
    Binita

    Hi Peter,
    thanks for the reply. I am using the third template viz SerialNumbers.xlt  only for updating UDFs in serial number's transaction table (OSRI). and all the default fields appear in the list while mapping which are there in the template. also the UDF column which I have added in the template does appear in the list on the left side (source fields)   but it does not appear on the right side (Target fields). so I have nothing to map it against.
    any idea?
    thanks,
    Binita

  • Hi i am using OS 10.8.5 i hv a problem moving items to trash when i delete any thing it deletes from specific folder but dosnt appear in trash n my hard drive space is not getting free kindly help me

    hi i am using OS 10.8.5 i have a problem moving items to trash when i move a specific thing to trash it deletes from that folder but does not appear in trash and my hard drive space is not getting free i am a new user to mac kindly help  me out

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia.

    I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia. 

    MX 2006 is so old it's no longer supported.  See if this helps you.
    Error: Unable to Activate | Macromedia products
    Nancy O.

  • I ask for help, I can not cancel a monthly subscription to Adobe! contrary to the tutorial does not appear  scribed CANCEL PLAN on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charg

    I ask for help, I can not cancel a monthly subscription to Adobe.
    contrary to the tutorial does not appear scribed "CANCEL PLAN" on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charge? 

    Just to clarify: This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    Have you done a Forum search?
    How can I delete my account? There is no "cancel plan" in my creative cloud free membership.
    Contact Customer Care

  • Serial nos not to appear only for STO delivery

    Hi All,
    We have set up serialziation for Finished products. We have set up the serial no. profile so that serial no. entry is mandatory during delivery (only).
    Now the client doesnt want the serial nos. to appear for deliveries created for stock transfer process. 
    How can this be done?
    Can we set up some contol the the delivery type level?

    Hi,
    There is no such direct solution for control serial number assignment on basis of delivery,but I think still we can fulfill this requirement.
    In OIS2
    For serialization procedure maintain serial usage none or optional,so it will not be mandatory/required
    Then now incompleteness procedure is based on delivery document type and delivery document item
    So through this you can make it mandatory for required delivery delivery type/item and exclude it from STO
    Kapil

  • When i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll  the specific module caould not be found"  i think this may be the reason why i can not open itunes store

    when i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll  the specific module caould not be found"  i think this may be the reason why i can not open itunes store

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • New material specifi field not appearing in LSMW objects

    Dear all,
    Within the conversion process, we have to load "Z" specific fields whose values are stored in the MARC table but that are not appearing in the standard LSMW object 0020 - Material master. Is there a specific step or action to be taken (or object to be selected in LSMW) so these fields would appear in the structure ?
    Thanks for your answer,
    Cheers

    Hi Olivier
    Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
    regards
    prasad
    reward if useful

Maybe you are looking for