Specific warning messages per compensation plan

Hello,
We ahve recently installed EHP5. We are now re-implementing Enterprise Compensation Management (ECM) with the new WebDynpro ABAP MSS iViews.
The warning messages are displayed on the top of the compensation planing iViews. Even our own messagesare displayed. The problem ist that all messages are displayed regardless of the compensation plan the manager is in. Let me give you an example:
The Manager performs a salary increase. When an employee is already over his targeted salary, a message will be displayed "Employee is over targeted salary". This is correct.
The problem ist when the Manager gives a bonus to this employee, the message will also be displayed. This not correct since the fact that the employee is over targedted salary is not relevant for a bonus.
Therefore we would like to be able to categorize Messages in the portal based on which Compensation plan the manger works on.
Any one having a solution?
Many thanks
Lucas

When did you activate your iPhone?
Depending on when you activated your iPhone within the current billing cycle, the 200 SMS messages are prorated for that period of time remaining in the billing cycle. If you activated during the 3rd week of the billing cycle for example, you don't get 200 SMS for the final week of the billing cycle. The limit would be 50 or so and if you sent/received over whatever the prorated number is for the time remaining in the billing cycle, you will be charged extra for the number of SMS over the prorated amount.
Were you charged for each SMS or beginning after a certain number of SMS was reached?

Similar Messages

Specific warning message when posting to a particular Vendor/s

Dear all,
I would like some advice on whether specific messages (maintained by a SAP user) can be configured for particular Vendors.
The requirement is to have a message 'pop-up' when posting Invoice/Payment to a particular supplier.
Is this at all possible please?
With thanks
PRG

Write a validation in GGB0 and assign it in OB28 to your company code.

Warning Message Should come if actual delevery date is before planned date

Dear all;
is there any settings to set
Warning Message if actual delevery date is before planned delevery date mentioned in the PO?
Thanking You;
Regards;
Joydeep Mukherjee

Hi,
Goto the below path,
SPRO->Materials MAnagement->Purchasing->Environment Data->Define Attributes of System Messages
Click on new entries & maintain your relevant message & mark it as 'W' in the category.
Regards,
Divya

Multiple charges for single text message, 10 cents per minute plan

I have a Go Phone, 10 cents per minute plan, which shows text messages should be charged at 20 cents per msg. However, I am getting charged multiple times on each text message. The most recent was a message of approx 100 words, billed 4 times at 20 cents. AT&T Billing site shows four consecutive charges for this as a SMS Originating, Local message, each one 20 cents. Is my plan really 20 cents per message or is it a charge per number of characters, words, etc.?

Hi Thank you for your post!
A standard text message or SMS is limited to 160 characters (including spaces and punctuation), so when sending a message longer than that, it actually gets broken up into however many 160 character massages it takes. In your case it sounds like there were 4 messages.
Most phones will split and then combine messages together automatically when sending and receiving to keep their intended formatting, so it may not always be clear how many messages it actually takes. Many phones have a character counter built in to help with some of that confusion, it may need to be turned on in the settings.
Please let us know if you have any other questions.
Thanks,
Dmitriy

Production Order Closed incompletely with a warning message

hi all,
Production order is allowing to close with a warning message("Not all item were issue be careful check before closing") even completed quantity is less than planned quantity.
System should have options in document settings for production order as 'Warning Only' or
"Block Release" in order to block production order from closing as per above case.
SAP should bring these new feature in next patch releases.
We are using SAP B1 2005B PL36.
Jeyakanthan

Hi ,
Following are prerequisites for closing a production order
1 The order must have the status Released (REL) or Technically completed (TECO)
2 The order balance must be 0
3 There can be no open purchase requisitions, purchase orders.
4 There can be no future change records from confirmation processes.
Then look into the Transaction; COFC.You can handle this from there.To settle the order use tcode KO88
Before that do Overhead calculation by KGI2, WIP calculation by KKAX, variance calculation KKS2.
Regards,
R.Brahmankar

Compensation Planning/Approval

Hi,
We are implementing a Compensation Planning/Approval on ERP 2005. We need to customize the standard functionality as per our requirements. We need to remove some fields from standard view and add custom fields.We have created some custom infotypes and function modules for the same. We have configured columns, column groups, dataviews etc..How do I link custom function module with columns of OADP to fetch data or save data to R/3?
Appreciate your help
Thanks,
Kathy

The OADP simply provides you with views of the org. data based on your config. So I am not sure what you mean by "save data to R/3"....the OADP does not do that. Your possibilities are two-fold...either the data selection side or the data display side.
For data selection....
In configuration for the "Define Rules for Object Selection" , you can configure it to use a function module instead of an evaluation path....per docs:
=======================================================
Function Module for Object Selection
Use
To enable the Object and Data Provider to display an organizational structure view, it must first determine the relevant objects. Therefore, you must define an object selection that is composed of object selection rules or a class for an object search. An object selection rule comprises an evaluation path together with an evaluation depth or a function module for determining objects.
In this field, you store the name of the function module that can be used as opposed to the evaluation path to determine the relevant objects.
=======================================================
If it is not necessarily the data that is pulled but a specific column you want to change to display other data based on your pulled data, you can also use a custom FM at that point as well. In the "Define Columns" configuration, you have the option for :
=======================================================
Define Columns
Use
In this IMG activity, you create columns. In these columns, the user can display additional information about the objects you specified for the defined object selections.
If the column content is to be determined in the backend system, enter a function module that is to get the column content.
To create a function module of your own, use the function module HRWPC_CB_CONTENT in the standard system as a template. You must use this as a template since your function module must have the same interface as the function module in the standard system.
If you want to reuse a function module that you have created for the Column Framework of the Personnel Management component, enter FM from Column Framework in this field.
You can find the relevant function modules in Customizing for Personnel Management under Global Settings in Personnel Management -> Column Framework -> Define Your Own Columns/Change Column Group Text -> Define Your Own Column ->Column Group Definition (view T77COL).
========================================================
Hope this helps!

MSS - ECM - Have control about the error/warning messages

Hi experts,
We're working on MSS 6.0 EHP2.
We need to manage the messages appeared in the Compensation Planning scenario. It's possible to get a lot of messages if you have many employees. Then, I'd like to manage those messages to filter only the most important ones.
In the presentation situated in http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e04131e7-a828-2b10-23bd-9fcf1a33e418, page 24 it shows: "Messages appear as defined in Customizing" But I don't know how I can do it.
I can personalize the iview and put the message area to invisible, but then we lost all the messages and that it what we don't want.
Could you please help me??
Thanks

Messages returned are of types : Informational, Warning and Error. What you can do (if you want to do from WD Java side ) try checking the BEcmplanning Web Dynpro Component present in MSS-ECM development component. There if you go to the context of the component controller you will see a context node named something as MD_Messages .... This context is filled at the time a backend function module is called and then based on the selected plan type FPM message manager gets the related message and displays in the message area. What you can do is.. before it gets displayed you can write a small logic to filter the messages..
In our case actually requirement was something related to more customization, where we needed to add (some messages based on custom logic) and remove some of the SAP message. So what we did, after getting the message from SAP standard Function module we passed the message table content to our custom function module which at the backend filtered/added messages and the final messages we got from our custom function module, were placed back into the MD_Messages context so the FPM message manager displays what we finally gave to it.

How to hide a warning message in Record working time

Hi,
I am entering working hours which is greater than actual planning hours in Record Working Time and if i click on Review it throws warning like
Number of hours recorded 14,00 exceeds target hours 7,50
I dont want to show this warning message
Please let me know how to do that
Thanks
Bala Duvvuri

Nachy,
we can enhance this FM and use one of the user exits
CATS0001 CATS: Set up worklist
CATS0002 CATS: Supplement recorded data
CATS0003 CATS: Validate recorded data
CATS0004 CATS: Deactivate functions in the user interface
CATS0005 CATS: Customer field enhancements
CATS0006 CATS: Validate entire time sheet
CATS0007 CATS: Subscreen on initial screen
CATS0008 CATS: Determine workflow recipients for approval
CATS0009 CATS: Customer-Specific Text Fields in Data Entry Section
CATS0010 CATS: Customer-Specific Text Fields in Worklist
CATS0011 CATS: Customer functions
CATS0012 CATS: Subscreen on data entry screen
Thanks
Bala Duvvuri

Converting Warning Message to Error Message in Benefits Enrollment Screen

Hello SAP,
How to convert Warning Message to Error Message in Benefits Enrollment Annual Enrollment Screen.
Warning Message: No beneficiaries selected for plan XXXX.
As per my requriement, there is one warning message which is popping up when all the plans total donot count to 100 %. At that time we need to show a Error message instead of Warning Message. Now warning message is displayed.
Reason: Insurance plans require error message when beneficiaries donot total to 100%
My question is in which message class or in which Table these messages are maintained and how to modify it.
Thanks,
Sankar Narayana

which badi you are using?
You cant use all methods to raise a error message
for example
Error_table of the method CHECK_DEPENDENTS of user exit PBEN0032 should
olny be used to raise configuration errors. Please use
CONSISTENCY_ERRORS to display any error message[move the content of
error_table to consistency_errors and clear the error_table inside the
method CHECK_DEPENDENTS].

Warning message in mir4 while posting

hi friends ,
In miro while we post the parked document then it display the warning message as "RG23 Part II posting not yet done" , when we click on enter , the document is posting . But the user wants that as an error message not the warning message. So please tell me in what way i can get the solution.
with regards,
prasad.

Hi
1. Setting up Vendor/Customer is OK to get net balance as you said
2. Spl GL account to track share capital also seems OK
3. For grants, there is a specific functionality under PSM (Public Sector Management) component of FSCM... I guess, this is added in EhP4.. I am not sure if it was there earlier as well
Fund Mngt can also be tried for funds mngt, but am not too sure... Its better to use the specific functionality
4. Regarding budgeting in CO, it can not be on individual GL accounts.. To have budget on GL accounts, you need to activate Funds MNgt.... Std budgetary control in CO is @ Internal Order Level
Regards
Ajay M

Warning message in field exit

Hi All,
I'd the requirement of giving a warning message for transaction VA01 if user enters some specific order type.
So I'd created a field exit for AUART for this screen. But i am able to give error message only and found out that warning & info messages can't be given in a field exit.
Please help me out. Is there any way I can give a warning message in field exit or suggest some other sol. for it.
Thanks,
Manu

Hi,
Thanks f or your answers, but the issue is that i need to give this message as User enters the details on VA01 screen & presses enters.SO i can't use user exit like move_field_to_Vbak & others.
Also, using a FM to give pop up message will ultimately make use of statement CALL SCREEN which is not allowed in field exit, i also tried FMs which displays messages normally means not in pop up screen, but again through it also i can only give error messages.
Please suggets if there is any other option.
Thanks,
Manu Parihar

Warning Message in MB52

Hello Friends,
When we enter in MB52 screen and execute report we get warning message.
In standard system from where this message is coming. this message is not configured in OMCQ.
Still this message comes.
How we can remove this message.
Regards
Kant

first of all it would be helpful if you name the messages to get a specific solution.
in OMCQ you will only find the customizable messages.
this is only a small part of all avaialble messages.
Messages are controlled and issued by the programs, partly hard coded, partly based on the customizing in OMCQ.
All messages can be seen in SE91 transaction.
it is possible to add messages to OMCQ, however, it is the program that decides if it looks into OMCQ or just does what is hardcoded in the program.

SSIS package fails with the error as given below. But its warning messages are incorrect.

My SSIS package loads data from access database to SQL Server database.
It's a straight copy. It fails with the below warnings and error message as shown below:
Error messages:
[OLE DB Source [113]] Error: There was an error with OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID] on OLE DB Source.Outputs[OLE DB Source Output]. The column status returned was: "Text was truncated or one or more characters had no
match in the target code page.".
[OLE DB Source [113]] Error: The "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]" failed because truncation occurred, and the truncation row disposition on "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
There are 3 warning messages even before I run the package. Warnings are all about the mismatch between the source and destination column sizes.
I cross checked the source and destination column sizes. The destination column sizes are fairly high than the source column sizes.
It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Thank you.

It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Please check if the dev destination table has same column data types and size as compared with pre prod table
Thanks, hsbal

Is there a way to expand the text area of the login/lock screen for the warning message?

I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens. It seems that the area allows about 250 character messages and I need to provide about 500 characters. Is there any way to expand the text area allotted for this purpose?
Bob Reed

To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image. Seems like there ought to be a NIB file that could be edited to accomplish this task:
I would appreciate any advice on which file should be edited to expand the text field.
Bob Reed

How to change Error Message into warning message

Dear Friends,
I am getting an error
The qty stored that was entered is adjusted
Message no. XU 040
at the time of GRN. I am maintaining batch specific Unit of Measure.
Please tell me how to change this error message in to a warning message.
Thanks
Prashant Atri

Hello Prashant,
This is satndard SAP messagge which is maintained in customizing;
SPRO>>Logistics - General>>Batch Management>>Define Attributes of System Messages
Here you can convert this messages to warning message. I urge you to please check with abaper as this may be hardcoded message and it may have implications on valuation and posting.
In the above IMG path you can do the changes
Br,
Tushar
Edited by: Tushar Patankar on Jan 1, 2011 5:36 PM

Specific warning messages per compensation plan

Similar Messages

Maybe you are looking for