"Specified Server Could Not Be Found" error: Graphite Ibook SE via Airport

Hi! I recently aquired an Ibook G3 Special Edition running OX 10.2.8 with an Airport card. The card seems to have no problems finding and connecting to the network. When I open Safari or Explorer the homepage will open up (Google or Yahoo) but I am unable to navigate within that page or go to a new page. I get the above error. Please help! Got this for my daughter to be able to do internet schoolwork at home and cannot afford a new one.

Thanks, but I went to that article first. There seems to be no connection problems - everything points to my computer being connected to the network, but I just cannot navigate within a page or away from a page. Any other suggestions?

Similar Messages

How to resolve "The specified Server could not be found" issue

I reinstalled my Mac OS X. (Format and and install)
Installation was successful but i can't connect to the world(Internet.)
Whenever i start Internet explorer it will prompt me "The specified Server could not be found"
MY current Settings:
Configure: Built-in Ethernet
TCP/IP: Configure Using DHCP, the reset setting are blank.
I'm using Cable modem (Starhub - Singapore Internet Services provider) and connect to a router & from router i used LAN cable connect G4 Ethernet port.
Any1 can give me a hand to resolve this issue, please.
On About this Mac it shown I'm using Mac OS X build 4K78
Processor: 2X PowerPC G4
Thanks

Can you connect to ANYTHING at all on your network ???
If you get the message that the server could not be found you should wait for a few minutes until the diagnostics launches automatically with the FIVE yellow, green or red balls to indicate ISP, Ethernet & other status reports...
M

How can i solve the vpn server could not be found error on my iphone 5s?

how can i solve the vpn server could not be found error on my iphone 5s?

FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
If I connect while in the premises (same LAN), connection is instantaneous and flawless.
If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues.

API Support.DLL Specified Module Could Not Be Found Error

Dear Sir/Madam,
While Starting my laptop the following error message is displaying on my desktop screen:
"There was a problem Starting
C:\user\dell\app data\local\conduit\API support\API support.dll
The Specified Module could not be found"
Kindly help me to resolve this problem as soon as possible.
Regards,
Chirag Agarwal
{REMOVED}

Hi,
Please try to restore the system back to the point before the issue happened.
If the issue persists, test in Clean boot mode and Safe mode.
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
Let us know which service or startup cause this pop-up.
Kate Li
TechNet Community Support

Transaction Launcher " server could not be found" error

Hi Gurus,
i have created a transaction launcher and maintain all necessary connectivity settings required, but now when i execute this transaction launcher link in CRM webui screen , it processes and throws error" firefox could not find server at "my server name".
some more information:
sicf service object like webgui and few more are activated and published in se 80.
anything else i should check or maintain please help it is critical.
Thanks,
G.One

hi,
i checked in txn:crms_IC_cross_sys, all details are maintained.
Anything else do i need to checked.
Thanks,
G.One

"Specified Server Could Not Be Found"

I have a few workstations in our workgroup that have a peculiar problem when accessing websites.
Occassionally, whenever they choose a bookmark or a link through e-mail, the first attempt to access the site fails. A second attempt executed in the same way is successful. This even happens in FTP programs, and it happens in Explorer and Safari.
Most of the computers on our network don't have this problem. We're all going through an Airport using DHCP.
Anybody have any ideas?

I think I've been able to eliminate that as a problem by checking internet access with several machines. Only a few Macs on our network have this problem. One of them just updated to 10.3.9, so we'll see if the problem persists.

Broadcasting Workbook Error | An active RFC server could not be found

Hi All,
I am facing an issue while trying to broadcast(distribute) a workbook. The broadcasting of a query from the query designer works fine. But when I try to distribute a workbook, it throws up the following error. We have used the SMTP method(Using SMTP plug-in) for broadcasting and we know that we can use RFC(Using RFC connection) too. But my question is whether RFC method is a must for workbook distribution.Kindly help me.
Thanking you,
Best Regards,
Manesh
The Error Log
Processing for user PUSHM, language EN
Processing setting
An active RFC server could not be found
Error occurred during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD
Processing setting !TEMP_2CC00BE0E24C704991039F6E9C2AC4E4 completed with errors
Job step for user PUSHM, language EN ended with errors


Hi,
Are you using BI 7 ?
Have you configured a Precalculation server in transaction RSPRECADMIN ?
Precalculation servers are basically PC, that are used for their Excel capabilities, in order to produce up-to-date workbooks.
Best regards,
Guillaume
Message was edited by:
Guillaume GARCIA

Apple update server could not be found

What does it mean when apple update server could not be found error comes up?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

SQL SERVER - Error while executing SSIS package on specific environment : Connection manager - The specified module could not be found

I have deployed my SSIS packages on SQL 2008 server.
I have a .bat file which will invoke these packages and also the bat file is placed in the server where the SSIS packages are deployed.
Scenario 1:
I double clicked on the bat file to invoke the SSIS packages and ; this executed successfully
Scenario 2:
I have used the IBM Tivoli work scheduler(TWS) to invoke the bat file which in tern will invoke the ssis packges;
but when i do this i am getting the below error
Code: 0x8007007E
Source: SSIS_Master_Event_Data_Transfer Connection manager "Config DB"
Description: The specified module could not be found.
Config BD is a connection manager which will get the connection string from the config file of the SSIS package.
Please help me to resolve this issue.
Regards,
Prakash

Check you TWS jobmanrc.cmd configuration file. You may need to add a PATH environment variable in that file that includes your SQL Server file locations. When TWS jobs are executed, they may not be executing with the same
PATH variable as when you execute the SSIS outside of TWS.

What does error message "a server with the specified hostname could not be found" mean? I'm a bit of a newbie to this can you help. Thanks

Hi Folks
Not to good at this techno stuff have a message on my phone saying "a server with the specified hostname could not be found" can anyone tell me what this means and how to fix it?
Thanks

Hi on several apps, eg local paper, can get printed word but no photos or media etc.

RIO server could not be found on the specified remote system

When trying to add a cRIO9074 to an empty project, I get the following message:
The RIO server could not be found on the specified remote system. Ensure that NI-RIO software is installed and that the RIO server is running and properly configured.
But when installing software from MAX I cannot find anything called NI-RIO. I am using LabVIEW 2012 + Realtime 2012.
As a result of this, I can't see the modules in the project window. However, I can deploy code to the cRIO that doesn't use any input or output.

I am getting the same message, I am using NI sb-RIO 9611. Using LabVIEW 13, NI RIO 13, RIo Device driver (most recent), Configured the IP of the device from NI MAX, Installed the software in the remote target.
Attachments:
ERROR.png ‏192 KB
Device Setup.png ‏136 KB

Windows Patching - Error when logging in - "The Specified procedure could not be found"

Hi,
I am in the process of windows patahcing our estate with SCCM 2012 R2. All going well, except for 3 machines which have the error: "The Specified procedure could not be found" when the user logs in. I have tried to log in my self, created a new
local account (via my machine remotely), but still no luck. Have checked Event Viewer and Windows Update but cant see where it failed. Been checking the net for fixes but no luck. The machine is a Windows 7 SP1 Enterprise 32 bit, info for server if needed
is SCCM 2012 R2. I have attached the WindowsUpdate log, incase that can help? I dont want to spend ages removing previous updates (via SCCM) as I dont have the time!
Wont let me attach the windowslog!If any one can help, be great!

Hi,
Let's make clear your issue.
Did you logon these 3 computers?
Have you tried to install the Windows Update manually for these 3 computers?
If no, have a try.
If yes and the error still persists, try to
reset Windows Update components for test.
Karen Hu
TechNet Community Support

Dboraslib.dll - Error 126 : "The specified module could not be found."

Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
 Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
 shared lib "dw_xml.dll" version 1 successfully loaded
 shared lib "dw_xtc.dll" version 1 successfully loaded
 shared lib "dw_stl.dll" version 1 successfully loaded
 shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....

Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

ODBC error: The specified module could not be found. ?

Hi,
I have Oracle9i database installed on a test server. If I set the ODBC on the server (the TNS service name is ABCD), I can test it and run a VB application without any error. Then, I need to run the VB application on a client (Windows XP), that does not have any Oracle database installed. Following somebody's suggestion, I installed oo4o for Oracle9i which has the Universal Installer. Then, I installed the Oracle ODBC driver for Oracle9i. It looks okay because when I click Add under System DSN, it lists "Oracle in OraHome90" which is the same as I see on my oracle9i database server. However, the TNS service name is empty (on the database server, it lists ABCD). If I enter ABCD (or ABCD.xyz.com, the full global database host name)in it and run the test connection, I got: "The specified module could not be found" in OCI.DLL window. The listener.ora on the database server does show SID_LIST_LISTNER = ... (SID_NAME = ABCD).
Can somebody explain why? I definetly don't want to install the database client software on this client machine, I just want to run a VB or JAVA application on it to connect to the database server using ODBC, or something else if possible.
Any help is appreciated!
Harvey

Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

"Specified Server Could Not Be Found" error: Graphite Ibook SE via Airport

Similar Messages

Maybe you are looking for