Specify either address number or address handle(AM53)?
Hi to All,
when i am doing sales postings by using standard IDOC (ORDERS) i am getting this error "Specify either address number or address handle(AM53)" .
Why this type of errors is come.
Is it xi issue or Functional issue.
My scenario is file to idoc.
How to solve this errors.
Please help me
Thank you to all.
Hi Lalitha,
Since the problem is happening during processing, there might be something missing in data part or maybe some custom logic issue (if implemented) in ECC.
Another possibility, if PI missed to map Address fields in IDoc segments because of which this issue was encountered.
Please verify these points.
Also, I found similar problem in another thread.
Specify either address number or address handle... | SCN
Hope you have gone through it and then raised the concern here. In case you haven't, please go through the thread once and check the notes specified.
Regards,
Abhishek
Similar Messages
-
Error message - Specify either address number or address handle
Hi all,
When I tried to display an outbound delivery, there is a status message which says 'Specify either address number or address handle'.
Please let me know the reason for the above.
Thanks and regards,
AnishurHello Anishur
Today I have received the same error message while processing an inbound ORDERS IDoc. The error is due to the partner segments E1EDKA1 which contained:
PARVW AG
ILNNR SHOPS02020001
PARVW WE
ILNNR SHOPS02020001
When I changed the data in this segments as shown below it works:
PARVW AG
LIFNR SHOPS02020001
PARVW WE
LIFNR SHOPS02020001
Regards
Uwe -
F.61 error "Specify either address number or address handle"
Hi,
I'm trying to trigger A/R correspondence with F.61 and am getting the error "_Specify either address number or address handle_" on some of our customers. Some work, some don't - and I can't see what the difference is. I'll get the error on an existing line item, but can create a new test document, and the correspondence is triggered with no problems.
Can someone explain this error message?
Thanks for your help!
-LoriCheck this thread and see whether it helps you.
[Error message - Specify either address number or address handle |Error message - Specify either address number or address handle;
thanks
G. Lakshmipathi -
"E Specify either address number or address handle Error"
getting following Error
"E Specify either address number or address handle"
while using BAPI
"BAPI_SALESORDER_CREATEFROMDAT2"Hi,
Check how you have filled the order_partners table.
Regards,
Bert -
"Specify either address number or address handle " BAPI_SALESORDER_CREATEFR
Specify either address number or address handle when using following BAPI
BAPI_SALESORDER_CREATEFROMDAT2
1°) E AM 53:
Specify either address number or address handle
2°) W V1 555:
The sales document is not yet complete: Edit data
3°) E V4 219:
Sales document was not changed
does anyone have an idea about how to correct this ? Maybe a documentation about how to use version data in sales order ?
Thanks for your help.Hi
I am facing the same problem for BAPI. " 2°) W V1 555:
The sales document is not yet complete: Edit data". Can you please tell me how you have corrected that error ?
Thanks
Joseph -
VF01 Error ... Specify either address number or address handle
HI All,
I am trying to create Inter company invocie from a delivery and not able to save it .
I am getting error in "Specify either address number or address handle".
Please let me know what should I correct as i could not find anything wrong in Delivery .
Regards
NidhiHi Nidhi
Please check the customer master record.In Customer master record,make sure that you have maintained proper address. Check in VBPA-ADRNR wheather the data is correct or different for bill to party
Regards
Srinath -
Error : Specify either address number or address handle
Hi guys
I am unable to change & even display the SALES ORDERS (VA02 , VA03)
I am getting error saying * Specify either address number or address handle*
Can you please explain Wats going Wrong
Thanks & RegardsCheck this thread
[Re: Specify either address number or address handle|Specify either address number or address handle(AM053);
thanks
G. Lakshmipathi -
Hi experts,
Given note validity for sap component SAP_ABA 620 but our server is SAP_ABA 740,which is higher level than the given note
While creating sales order we are getting the below error while creating a version document for the sales document .
Message type E
Message Class AM
Message number 53
Message text Specify either
Parameter Name VBAKKOM
Please advice.Hi Enrique,
Note 456190 is not applicable in SAP_ABA 740 as per basis personnel.
After de-activation of all enhancements,Iam still getting the same error message.
If partner determination procedure TA (std order) assignment to sales documnet type is removed we are able to create a version document but without partners and pricing.
Please advice. -
Specify either address number or address handle(AM053)
Hi Experts,
We have this error when we try to create a purchase order from a purchase requisition. This problem just appears for only one User, the same purchase requisition is ok to create the PO in the rest of the user. So we donu2019t know what is the parameter or something special in the user to get this error. We have checked this error and we have implement all the SAP Notes to solved.
Thank you and best regards.Hi,
There may be authorization check for the user not to create PO from PR. Please check in that aspect.Please clarify what error you are getting while executing the function for providing better solution. Thanking you. -
Regarding the ipv6 address handling in oracle pl/sql
Hi,
This is regarding the ipv6 address handling in pl/sql.
Can we use any c program inside the oracle as C/C++ provides more buitl in function for address handling.
Are there are any similar functions in pl/sql.
Kindly let me knoe if there is a way to calculate ipaddress masking.
Are there any system functions in oracle similar to inet_ntop/inet_pton to validate ipv6 addresses.
If not kindly let me know if there is any alternate way.
Thanks and Regards,
Anantha.Billy Verreynne wrote:
Sven, he means converting a numeric network address to a presentation (character) address - and vice versa.Ok I understand. Validating for me had been either
a) validate that the IP address does really exist. This could have been implemented by executing some kind of ping command.
or
b) validate that the string that hold the human readable IPv6 address is correct same a as string like "[email protected]" looks like a valid email address. This of cause would be implemented with some kind of regexp expression.
However it seems he wants a conversion of the string (human readable ipv6) into a machine readable (hex) representation. Not sure why this is needed, But I agree that simply reusing the OS C routines seems to be the best way to do it.
I strongly doubt that the result is very useful in Pl/sql. So the big question (as so often) would be what is the business case behind this requirement. Maybe some part of the logic needs to be implemented outside the database anyways. Then it could be useful to add this conversion to this outside part as well. -
Hi all,
What is a Address handle which we pass as a parameter to the Fm ADDR_COMM_MAINTAIN
How to find out the same????
Thx in Advance,
sandeep,.Hi kaushal,
pls look to documentation of function group <b>SZA0</b>
(path: se80 - function group SZA0 - double click -
function group doc. )
example is in TA VAP2 :
business/home-adress of contact person
regards Andreas -
Specify either normal transactions or a special G/L transactions.
while creating dunning procedure fbmp, i got following error.
specify either normal transactions or a special G/L transactions.
i already create the special g/l transactions.Hi,
In the transaction FBMP, you have check boxes for "Standard transaction" and "Special G/L". Select the appropriate check box.
Regards
Sreekanth -
F110 Error Specify a lot number for the production run Message no.FS546
Hello Experts,
I am doing F110 Automatic payment Program.
All stpes i had done , but Click to start the payment run.
System give me error,
Specify a lot number for the production run
Message no.FS546
For that I had maintained T code FHCI
Maintain Check lot , But system can not pick check lot.
And Maintained Variant in that tab where we can give you House Bank , I'd , Check lot number (But it can not save)
Please tell me what should i do ?
Waiting for reply.
Regards,
JemesSir
No sir check lot is not there.
Can you tell me in Varaint Field which field i have to fill.
Program run date:25.09.2009
Identification feature:P5
Paying company code:1000
Sending company code:1000
Payment method: C
Pmt meth. supplement:
Business Area:
House Bank: STD01
Account ID: STD01
Check lot number: 0
(Check Lot No. is not save inthis field)
Restart from Check Number:
Currency: INR
Payment document no.:
Print Control
Print Check:Tick
Print pay advice note:
no form summerysection :Tick
Do not Void any check:Tick
Please suggest what chnages i do ?
wating for reply.
regards,
Jemes
Edited by: Jemes on Sep 25, 2009 10:41 AM
Edited by: Jemes on Sep 25, 2009 10:47 AM -
Extrernal Number Ranges for Handling Units in COWBPACK
Dear Friends,
I need to activate external number range for handling units in COWBPACK transaction.
When I run COWBPACK, I don't get any field to enter Handling Unit Number.
Can anybody suggest the way out.
Regards,
HarshOK
-
GUI connection error MAXIMUM NUMBER OF CONNECTION HANDLES REACHED
Dear Experts
while logging on to GUI7.10 I am getting following error
MAXIMUM NUMBER OF CONNECTION HANDLES REACHED'
'MAXIMUM NUMBER OF HANDLES REACHED'. 'NO MORE MEMORY IS AVAILABLE'.
'DO YOU WANT TO SEE DETAILED ERROR DESCRIPTION?'
When i click on yes to the question above, i get the following:
'COMPONENT = DPTM'
'RELEASE = 7.10'
'VERSION = 10'
'RETURN CODE= -16'
'Counter = 3
This error is not allowing me work.
Does anyone have a solution?Hi,
I am having the same issue. Did you resolve the issue.
Please let me know
Regards
Maybe you are looking for
-
Air for Android no video playback controls
Hi there I'm using Flash Professional CS5.5 I'm currently developing a Android app, I've imported a video clip using the import video wizard. I've tested it by publisihng it to my Android device, the video clip plays fine but there are no play/pause
-
Capturing of Equipment Number Listed in Objects Tab of PM Order
Hi All, I wanna to use User EXIT IWO10009 for Checking Some Values prior to save a order. inOrder there are some equipmens are mentioned in Objects tab page. now prior to saving the Order , i want to check whether Asset number is available in Equipme
-
I can't get my remote to work. Apple TV does not light up? Has worked for years?
-
Dbca on single instance and crs problem
Hi, in a machine was removed the crs software. I want to creata a single database instance on a single machine. The SO is RH 5.5 and the db is 11.2.0.2. I don't know what was done, but now, if i try to create a database with dbca, i get the following
-
SAP Automatic Workstation Update user rights ?
Hi, Does the workstation user need local admin rights to run SAP Automatic Workstation Update service ? thanks Vilius