"Specify either address number or address handle " BAPI_SALESORDER_CREATEFR

Specify either address number or address handle when using following BAPI
BAPI_SALESORDER_CREATEFROMDAT2
1°) E AM 53:
Specify either address number or address handle
2°) W V1 555:
The sales document is not yet complete: Edit data
3°) E V4 219:
Sales document was not changed
does anyone have an idea about how to correct this ? Maybe a documentation about how to use version data in sales order ?
Thanks for your help.

Hi
I am facing the same problem for BAPI. " 2°) W V1 555:
The sales document is not yet complete: Edit data". Can you please tell me how you have corrected that error ?
Thanks
Joseph

Similar Messages

  • Error message - Specify either address number or address handle

    Hi all,
    When I tried to display an outbound delivery, there is a status message which says 'Specify either address number or address handle'.
    Please let me know the reason for the above.
    Thanks and regards,
    Anishur

    Hello Anishur
    Today I have received the same error message while processing an inbound ORDERS IDoc. The error is due to the partner segments E1EDKA1 which contained:
    PARVW     AG
    ILNNR     SHOPS02020001
    PARVW     WE
    ILNNR     SHOPS02020001
    When I changed the data in this segments as shown below it works:
    PARVW     AG
    LIFNR     SHOPS02020001
    PARVW     WE
    LIFNR     SHOPS02020001
    Regards
      Uwe

  • Specify either address number or address handle(AM53)?

    Hi to All,
    when i am doing sales postings by using standard IDOC (ORDERS) i am getting this error "Specify either address number or address handle(AM53)" .
    Why this type of errors is come.
    Is it xi issue or Functional issue.
    My scenario is file to idoc.
    How to solve this errors.
    Please help me
    Thank you to all.

    Hi Lalitha,
    Since the problem is happening during processing, there might be something missing in data part or maybe some custom logic issue (if implemented) in ECC.
    Another possibility, if PI missed to map Address fields in IDoc segments because of which this issue was encountered.
    Please verify these points.
    Also, I found similar problem in another thread.
    Specify either address number or address handle... | SCN
    Hope you have gone through it and then raised the concern here. In case you haven't, please go through the thread once and check the notes specified.
    Regards,
    Abhishek

  • F.61 error "Specify either address number or address handle"

    Hi,
    I'm trying to trigger A/R correspondence with F.61 and am getting the error "_Specify either address number or address handle_" on some of our customers.  Some work, some don't - and I can't see what the difference is.  I'll get the error on an existing line item, but can create a new test document, and the correspondence is triggered with no problems.
    Can someone explain this error message?
    Thanks for your help!
    -Lori

    Check this thread and see whether it helps you.
    [Error message - Specify either address number or address handle   |Error message - Specify either address number or address handle;
    thanks
    G. Lakshmipathi

  • "E Specify either address number or address handle Error"

    getting following Error
    "E Specify either address number or address handle"
    while using BAPI
    "BAPI_SALESORDER_CREATEFROMDAT2"

    Hi,
    Check how you have filled the order_partners table.
    Regards,
    Bert

  • VF01 Error ...   Specify either address number or address handle

    HI All,
    I am trying to create Inter company invocie from a delivery and not able to save it .
    I am getting error in "Specify either address number or address handle".
    Please let me know what should I correct as i could not find anything wrong in Delivery .
    Regards
    Nidhi

    Hi Nidhi
    Please check the customer master record.In Customer master record,make sure that you have maintained proper address. Check in VBPA-ADRNR wheather the data is correct or different for bill to party
    Regards
    Srinath

  • Error : Specify either address number or address handle

    Hi guys
    I am unable to change & even display the SALES ORDERS (VA02 , VA03)
    I am getting error saying   * Specify either address number or address handle*
    Can you please explain Wats going Wrong
    Thanks & Regards

    Check this thread
    [Re: Specify either address number or address handle|Specify either address number or address handle(AM053);
    thanks
    G. Lakshmipathi

  • Sales order versioning issue - 698664 - Direct input: AM053 Specify either address number or handle

    Hi experts,
    Given note validity for sap component SAP_ABA 620 but our server is  SAP_ABA 740,which is higher level than the given note
    While creating sales order we are getting the below error while creating a version document for the sales document .
    Message type   E
    Message Class  AM
    Message number  53
    Message text   Specify either
    Parameter Name VBAKKOM
    Please advice.

    Hi Enrique,
    Note 456190 is not applicable in SAP_ABA 740 as per basis personnel.
    After de-activation of all enhancements,Iam still getting the same error message.
    If partner determination procedure TA (std order)  assignment to sales documnet type is removed we are able to create a version document but without partners and pricing.
    Please advice.

  • Specify either address number or address handle(AM053)

    Hi Experts,
    We have this error when we try to create a purchase order from a purchase requisition. This problem just appears for only one User, the same purchase requisition is ok to create the PO in the rest of the user. So we donu2019t know what is the parameter or something special in the user to get this error. We have checked this error and we have implement all the SAP Notes to solved.
    Thank you and best regards.

    Hi,
    There may be authorization check for the user not to create PO from PR. Please check in that aspect.Please clarify what error you are getting while executing the function for providing better solution. Thanking you.

  • Regarding the ipv6 address handling in oracle pl/sql

    Hi,
    This is regarding the ipv6 address handling in pl/sql.
    Can we use any c program inside the oracle as C/C++ provides more buitl in function for address handling.
    Are there are any similar functions in pl/sql.
    Kindly let me knoe if there is a way to calculate ipaddress masking.
    Are there any system functions in oracle similar to inet_ntop/inet_pton to validate ipv6 addresses.
    If not kindly let me know if there is any alternate way.
    Thanks and Regards,
    Anantha.

    Billy  Verreynne  wrote:
    Sven, he means converting a numeric network address to a presentation (character) address - and vice versa.Ok I understand. Validating for me had been either
    a) validate that the IP address does really exist. This could have been implemented by executing some kind of ping command.
    or
    b) validate that the string that hold the human readable IPv6 address is correct same a as string like "[email protected]" looks like a valid email address. This of cause would be implemented with some kind of regexp expression.
    However it seems he wants a conversion of the string (human readable ipv6) into a machine readable (hex) representation. Not sure why this is needed, But I agree that simply reusing the OS C routines seems to be the best way to do it.
    I strongly doubt that the result is very useful in Pl/sql. So the big question (as so often) would be what is the business case behind this requirement. Maybe some part of the logic needs to be implemented outside the database anyways. Then it could be useful to add this conversion to this outside part as well.

  • Address handle

    Hi all,
    What is a Address handle which we pass as a parameter to the Fm ADDR_COMM_MAINTAIN
    How to find out the same????
    Thx in Advance,
    sandeep,.

    Hi kaushal,
    pls look to documentation of function group <b>SZA0</b>
    (path: se80 - function group SZA0 - double click -
           function group doc. )
    example is in TA VAP2 :
    business/home-adress of contact person
    regards Andreas

  • Specify either normal transactions or a special G/L transactions.

    while creating dunning procedure fbmp, i got following error.
    specify either normal transactions or a special G/L transactions.
    i already create the special g/l transactions.

    Hi,
    In the transaction FBMP, you have check boxes for "Standard transaction" and "Special G/L". Select the appropriate check box.
    Regards
    Sreekanth

  • F110 Error Specify a lot number for the production run Message no.FS546

    Hello Experts,
    I am doing F110 Automatic payment Program.
    All stpes i had done , but Click to start the payment run.
    System give me error,
    Specify a lot number for the production run
    Message no.FS546
    For that I had maintained T code FHCI
    Maintain Check lot , But system can not pick check lot.
    And Maintained Variant in that tab where we can give you House Bank , I'd , Check lot number (But it can not save)
    Please tell me what should i do ?
    Waiting for reply.
    Regards,
    Jemes

    Sir
    No sir check lot is not there.
    Can you tell me in Varaint Field which field i have to fill.
    Program run date:25.09.2009
    Identification feature:P5
    Paying company code:1000
    Sending company code:1000
    Payment method: C
    Pmt meth. supplement:
    Business Area:
    House Bank: STD01
    Account ID: STD01
    Check lot number: 0
    (Check Lot No. is not save inthis field)
    Restart from Check Number:
    Currency: INR
    Payment document no.:
    Print Control
    Print Check:Tick
    Print pay advice note:
    no form summerysection :Tick
    Do not Void any check:Tick
    Please suggest what chnages i do ?
    wating for reply.
    regards,
    Jemes
    Edited by: Jemes on Sep 25, 2009 10:41 AM
    Edited by: Jemes on Sep 25, 2009 10:47 AM

  • Extrernal Number Ranges for Handling Units in COWBPACK

    Dear Friends,
    I need to activate external number range for handling units in COWBPACK transaction.
    When I run COWBPACK, I don't get any field to enter Handling Unit Number.
    Can anybody suggest the way out.
    Regards,
    Harsh

    OK

  • GUI connection error MAXIMUM NUMBER OF CONNECTION HANDLES REACHED

    Dear Experts
    while logging on to GUI7.10 I am getting following error
    MAXIMUM NUMBER OF CONNECTION HANDLES REACHED'
    'MAXIMUM NUMBER OF HANDLES REACHED'. 'NO MORE MEMORY IS AVAILABLE'.
    'DO YOU WANT TO SEE DETAILED ERROR DESCRIPTION?'
    When i click on yes to the question above, i get the following:
    'COMPONENT = DPTM'
    'RELEASE = 7.10'
    'VERSION = 10'
    'RETURN CODE= -16'
    'Counter = 3
    This error is not allowing me work.
    Does anyone have a solution?

    Hi,
    I am having the same issue. Did you resolve the issue.
    Please let me know
    Regards

Maybe you are looking for

  • Save as text not working

    When I try to save a PDF as text, my document is empty. Also, it appears I only have the option of saving as accessible text, not plain text. I am using the latest version (8.1.2). Anyone able to do this successfully?

  • L430 miniDP to HDMI adapter (w audio)

    Can you recommend a miniDP to HDMI F adapter that works with sound on L430? I recently got one from Startech through Amazon, but it does not stream audio to my TV.  I checked some reviews in Amazon, and it looks as if it supports only audio conversio

  • How to find that a statement is used in which programs

    Hi Experts, Is it possible to find the statement "gi_tline-tdformat = ‘>*’ " is present in which programs?. Please reply.Its urgent.TIA Regds Abhishek

  • After multi-mailbox search deleted the results are not cleared out of discovery mailbox?

    So my legal team has finally given me the OK to remove the results of a multi-mailbox search that the results of were sent to a discovery mailbox.   I've deleted the search, OK'd the warning indicating that the results of the search would be deleted

  • Tick marks?

    Can someone explain me the tick marks? So I have all kinds of playlists, and I have never manually used the tick marks, still some songs are without them? Why? Does it have anything to do with the fact that iPod got full and iTunes created this autom