Specify log off page for each system in WebUI

I am trying to define log off URL for the CRM WebUI. I have been able to define the URL on the technical profile. The problem for me is that the url points to a system specific page. In other words, when I define in the development system that I want to go to the logon page when I log off I use the URL of that points there. When this customizing later is transported to the quality system and later to the production system, the log off URL still points to the log on page of the development system.
Is there any way to specify that this url points to the log on page of the system that were logged off?

Hi Erik,
this is not possible in the SAP standard AFAIK.
The URL in the customizing of the technical role profile is read using the method CL_CRM_UI_TP_SRV->GET_URL_PART( ). In order to implement your requirement you could, e.g. implement a custom table containing the client, system name and URL. Additionally, you could then enhance CL_CRM_UI_TP_SRV->GET_URL_PART( ) using an implicit enhancement spot to read this custom table an return the entry for the system ID if present and the default customizing otherwise.
Best,
Christian

Similar Messages

  • BW Monitor error  Could not find code page for receiving system

    Hi All,
    Frequent BW Monitor error  - Could not find code page for receiving system
    I checked SM59 and every setting is fine there. Any other possibility ?
    Regards
    Srinivas

    The log updated in the status tab was:
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.

  • Error "could not find code page for receiving system"

    Hello Everyone,
    We are trying to load data and receive the message:
    Could not find code page for receiving system
    We have searched notes and this forum and can't find anything.  We also checked WE20 and could not find anything wrong.
    Can someone please elaborate specifically what this error is and where to fix it?
    Thanks so much.
    Colleen

    I just upgraded to NW 2004 SR1, and when loading data from a non-unicoded R/3 system to our BW unicoded system I experienced the exact problem.  Here is the resolution that is stated in note #613389 (it's not very clear in the note).
    - Language “EN” must be specified in sm59
    - Under Special Options -> RFC Bit Options
    Make sure that “Use Found Communication Code Page” has a check mark.
    Once this was done, the data loads started completing successfully.

  • Infopackage Idocs in status 2 - could not find code page for receiver system

    Hi,
    We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
    We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
    One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
    We did not encounter this issues on our previous migration test runs..
    Hope someone can help
    Christophe

    Hi,
    Thanks for responding. We finally found out what the problem was.
    We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
    Regards
    Christophe

  • IDoc Status 02 ( Could not find code page for receiving system )

    Hi All,
    I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
    Error description.
    Could not find code page for receiving system
    Message no. E0266
    Diagnosis
    For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Procedure for System Administration
    Possible causes are:
    1. The entry no longer exists in the table of logical destinations.
    2. The target system could not be accessed at runtime.
    3. The logon language is not installed in the target system.
    4. In the destination system, no logon language is maintained
    Please help.
    Thanks - Vinay.

    Hi Vinay,
    Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination  is working fine and your able to connect to target system and also check correct port is assigned.
    Regards,
    Vinod.

  • Idoc Error: Could not find code page for receiving system

    hi,
    I am facing the following error while processing Idocs.
    ERROR: Could not find code page for receiving system
    Diagnosis
    For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

    Hi,
    I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
    If this helps you really award me the points.
    ~Katty

  • Report for time log on detail for each employees in SAP ABAP-HR report

    hi experts,
          please help me .how to create a report for time log on detail for each employees in SAP ABAP-HR report.please help me.
                                                      thank you

    Hi,
    For Time Management Infotypes , If you want to read the data using macro you need to use the Macro called RP_READ_ALL_TIME_ITY
    Example:
    DATA: BEGDA LIKE P2001-BEGDA, ENDDA LIKE P2001-ENDDA.
       INFOTYPES:  0000, 0001, 0002, ...
                         2001 MODE N, 2002 MODE N, ...
         GET PERNR.
       BEGDA = '19900101'. ENDDA = '19900131'.
       RP_READ_ALL_TIME_ITY BEGDA ENDDA.
       IF PNP-SW-AUTH-SKIPPED-RECORD NE '0'.
          WRITE: / 'Authorization for time data missing'.
          WRITE: / 'for personnel number', PERNR-PERNR. REJECT.
       ENDIF.

  • Idoc failed in Bi system "Could not find code page for receiving system".

    Dear Experts,
    i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
    All the idocs have been successfully posted except one which is giving this error
    Idoc status 02 - could not find code page for receiver system.
    Please guide me
    thanks
    vamsi

    Hello Vamsi,
    check Note 647495 - RFC for Unicode ./. non-Unicode Connections
    If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
    Please check this thread - IDoc error - Could not find code page for receiving system
    Hope it helps,
    Thanks & Regards,
    Amit Barnawal

  • Enterprise Portal Log off Issue for External User

    Hello
    We are facing a Enterprise Portal log off issue for one of our external users.
    User is logged in and clicks on the "Log Off" link .
    User is prompted as seen below:
    Are you sure you want to logg off?
    Choose Yes or No
    Click on Yes and popup window goes away and nothing else happens.
    These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
    Also  popups are not blocked on IE.
    EP version with SP level is EP 7.00 SP12.
    Even though from Internet explorer 6, i can log in and log off with internal user.
    Please advise for the log off problem .

    Hello
    I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
    on Config Tool Global Paramter settings.
    Then restart the server.
    But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
    Please advise

  • Could not find coding page for receiving system

    Hi,
    We have set up the configuration of RFC connections in SM59. We want to send an IDoc from a Unicode to a non-Unicode system. Message 'Could not find coding page for receiving system' appears. We activated some solutions described in OSS notes and added the required authorization to the communication user but it still doesn't work. What else can cause (solve) this problem?
    Regards, Jan

    Hello Jan,
    I had the following situation:
    After seup of an ALE/IDOC scenario with another SAP but Non unicode system sometimes the outbound PROJECT idocs failed with the error message "Could not find code page for receiving system". Status of Idoc was 02. When reprocessed some minutes later with report RBDAGAIN it worked.
    It turned out that for what'o'ever reason the connectivity was down for a very short time but long enough to get the Idocs failed.
    That's what I meant with the error text could be misleading.
    We solved this problem with a daily job with report RBDAGAIN for reprocessing.
    Regards
    Michael

  • Could not find code page for receiving system

    Hi  Experts,
              When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
    Dave
    "Could not find code page for receiving system"

    Hi Praveen,
    The detailed error msg says the following.
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    System response
    There are IDocs with incorrect status.
    Procedure
    Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
    Removing errors:
    How you remove the errors depends on the error message you receive.

  • Within the budget template; how would one create an entire year worth of a budget; with out having to create a separate page for each month?

    Help!
    Loving the budget template, but I would like to be able to create an entire years worth of a buget with out creating a whole new transaction/budget page for each month. How do I get the new transaction to identify a new budget chart?
    Thanks, Emily

    Emily,
    No need to think the budget template is only for one month.  Just keep typing the date in the date column of the "Transactions" sheet and the details will update.  You should adjust the budget categories to match the duration of time you want to use.
    If you do want month-by-month, then you can switch to the "Transactions" sheet, select the table, cut
    then switch back to the "Budget" sheet, paste.
    Now rename the "Budget" sheet something like "Budget Jan 2014", and delete the "Transactions" sheet. Set the budget for Jan in the column I highlighted above.  The subsequent months, duplicate the monthly budget:
    Then adjust the the entries in the transactions table inside this sheet.

  • Is it possible to make a log in page for Adobe Digital Publishing Professional Edition?

    I would like to create a log in page with key in username and password on the first page of the DPS App.
    Is it possible to make a log in page for Adobe Digital Publishing Professional Edition?

    No. You need enterprise edition to create a custom storefront.
    Neil

  • Need to change screen colours for each system in the landscape

    hi ,
    we are in need of having different themes for different systems in the landscape .
    that is
    if i click development system , the screen with 'theme1'
    if i click quality system system , the screen with 'theme2'
    if i click production system system , the screen with 'theme3'
    how to configure this colour setting in accord to the system for all the users

    Hi Susin,
    You would do this by changing the parameter sapgui/theme for each system. It uses the Tradeshow theme by default as of Web AS 6.40. As long as the SAPgui itself is set to "System Dependant" then it should work fine.
    Regards,
    Nelis

  • Can Firefox 6 be configured to remember more than 5 prior pages for each tab so that the "go back one page" feature will allow me to retrace my steps as many as 20 pages back?

    Before Firefox 5, the "go back one page" history would show 10 or more prior pages for each tab, so that I could go back quite a way in retracing my browsing steps. With Firefox 5.0.1 and 6, however, the list of prior pages seems to have been capped at 5. I would like to configure Firefox to remember 20 or 25 prior pages for each tab. Is there any way to do that?

    (1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
    You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
    If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
    (2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
    orange Firefox button (or Tools menu) > Options > Privacy
    * The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
    * The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
    Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Maybe you are looking for

  • PI 7.11 - confusing error messages in the Default Trace

    Hello, Every day, I see these error messages pop up in the default trace ( all with location System.err ): at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314) at com.sap.engine.core.thread.execution.Exec

  • Opening Stock and Closing Stock fields and Calculation

    Hi, My report requirement is to display the material, opening stock for the lower date, closing stock for the higher date and the in between all stock operations..how to fetch the opening stock and closing stock for a particular material ???.. what a

  • How do I recover files from an external Hard Drive?

    I have an external Hard Drive that has somehow lost communication with my Mac Mini. It won't mount. When I attempt to give it first aid it says first aid failed. This is what it says. Verifying volume "MicroNet 250GB External" Invalid Volume Header C

  • RMAN restore database validate

    All, I cannot seem to find anything in the Oracle documentation what the RMAN restore database validate checks for? Does it check for physical and logical corruption or do I need to validate the backup using logical statement to check for this? I wou

  • Importing Songs Question

    ...Songs that are imported into iTunes in .wav format (or any format other then .mp3)- are they automatically converted into .mp3's? I ask because I've recently had to reformat my 40GB iPod (Windows) because iTunes indicated that I didn't have enough