Specify maintenance status 'read only'. View /TDM/9_... could not be activa

I believe I run across a TDMS-related issue. I have been rolling out ERP SPS 9 to all ERP systems. I am now down to the final system, our training system. While importing the support packs, I get the following errors:
Field ARCH_XHOME-ROWID does not exist
Key field ARCH_XHOME-FILENAME missing. Specify maintenance status 'read only'.
Field BWFS_SETTINGS_0D-ROWID does not exist
Key field BWFS_SETTINGS_0D-INFOSOURCE missing. Specify maintenance status 'read only'.
Field HRP1008-ROWID does not exist
Key field HRP1008-BEGDA missing. Specify maintenance status 'read only'.
Key field HRP1008-ENDDA missing. Specify maintenance status 'read only'.
Key field HRP1008-ISTAT missing. Specify maintenance status 'read only'.
Key field HRP1008-OBJID missing. Specify maintenance status 'read only'.
Key field HRP1008-OTYPE missing. Specify maintenance status 'read only'.
Key field HRP1008-PLVAR missing. Specify maintenance status 'read only'.
Key field HRP1008-SEQNR missing. Specify maintenance status 'read only'.
Key field HRP1008-SUBTY missing. Specify maintenance status 'read only'.
Key field HRP1008-VARYF missing. Specify maintenance status 'read only'.
View /TDM/9_200C00643 could not be activated
View /TDM/9_200C00644 could not be activated
View /TDM/9_200C00645 could not be activated
View /TDM/9_200C00798 could not be activated
View /TDM/9_200C00965 could not be activated
View /TDM/9_200C01701 could not be activated
View /TDM/9_200C01846 could not be activated
View /TDM/9_200C01848 could not be activated
View /TDM/9_200C02737 could not be activated
View /TDM/9_200C03032 could not be activated
View /TDM/9_200C04033 could not be activated
View /TDM/9_200C04041 could not be activated
After some looking through SDN and OSS messages, I found a relevant posting (DDIC ACTIVATION ERROR) but no solution. I have submitted a message to SAP but since I'm under a time limit, I need to use all available resources to resolve.
I suspect these issues are a result of TDMS. Client 200 is the target of a TDMS copy. We have dropped this client for now just to see if that resolves the issue, but it did not as we expected. I suspect there is something in the TDMS controller that we need to do to "release" this system as a target but we're just now evaluating TDMS and are not experts. Any suggestions?

Hi,
To resolve the mentioned problem please follow the instructions
given in following SAP note :
1020887 - Generated views in receiver system not deleted correctly.
Follow the instructions as mentioned in the note properly.
Thanks,
Rupam

Similar Messages

Read only view which has an ORDER BY clause

Aim to create a read only view which has an ORDER BY clause
Sample script
CREATE TABLE tab1 (
col1 VARCHAR2(3),
col2 NUMBER
INSERT INTO tab1(col1, col2) VALUES ('ccc', 30);
INSERT INTO tab1(col1, col2) VALUES ('bbb', 20);
INSERT INTO tab1(col1, col2) VALUES ('ddd', 40);
INSERT INTO tab1(col1, col2) VALUES ('aaa', 10);
COMMIT;
-- To creat View
CREATE OR REPLACE VIEW v_tab1
AS
SELECT
col1,
col2
FROM
tab1
ORDER BY
col1
WITH READ ONLY;
I get the following error
WITH READ ONLY
ERROR at line 10:
ORA-00933: SQL command not properly ended
When I comment out the ORDER BY clause, the view is created
Pls let me know how I can create a read only view with ORDER BY clause

Hi,
take a look at the documentation for CREATE VIEW, there is a restriction:
"You cannot specify the ORDER BY clause in the subquery if you also specify the subquery_restriction_clause."
Wolfgang

TM Contention and Read Only Views - Toad

I have a case where a select against a view that has the read only option caused TM contention. I realize that the TM can be fixed by indexing the unindexed foreign key which I plan to do. The user only has select privilege so the locking must have come from select for update, but when I checked the query it was a select against a read only view from Toad. Has anyone seen the case where Toad does a select for update behind the scenes which causes locking issues. I am thinking this must be the case otherwise I do not know how a select against a readonly view could hold a lock.

user12191713 wrote:
I have a case where a select against a view that has the read only option caused TM contention. I realize that the TM can be fixed by indexing the unindexed foreign key which I plan to do. The user only has select privilege so the locking must have come from select for update, but when I checked the query it was a select against a read only view from Toad. Has anyone seen the case where Toad does a select for update behind the scenes which causes locking issues. I am thinking this must be the case otherwise I do not know how a select against a readonly view could hold a lock.using sqlplus post the same SQL & results
Handle:     user12191713
Status Level:     Newbie
Registered:     Aug 4, 2011
Total Posts:     40
Total Questions:     25 (19 unresolved)
I extend to you my condolences; since you rarely get your questions answered here.

Partial read-only view object. How to make it work?

Hello,
is there a way to have a "partial" read-only view object, where some attributes are based on an EO and some others are extracted directly from a table with no corresponding EO?
On this view-object it should be possible to perform row insertions from an af:table, in a way that, after validation (i.e. a row selection change), the values on the attributes not based on the EO do not get lost, even if they do not have any attributes based on an EO.
On the other hand, if I use fake EO attributes ($none$) for those read-only attributes, their values will not gest lost after validation of the new interted rows, but in this case, when the table is first rendered on the page, the table shows empty values on those items, probably because the EO attributes are empty when the query is performed.
Note that It seems I cannot use Transient attributes where their value is calculated with a SQL statement, since it would mean I would have to perform an heavy SQL statement for every transient attribute.
Is there any other solution, I hope the problem is clear.

That solution does not cover the case where an attributed of one entity used as reference is calculated from a SQL expression with parameters involving the remaining attributes of the same entity.
For example consider a reference-only entity based on a table with one field T(COD). This entity has one more attribute other than COD itself, CALCULATED_VALUE.
How can I bind the attribute CALCULATED_VALUE to a SQL expression which is a function of COD: MyDBPackage.GetValue(COD, :environment), where :environment is bind variable?
The frameowork always give me JBO-exception , asking to specify IN or OUT for the variable.

Read-Only view object won't give me it's row

Hi,
I have a read only view object which when executed has one row in it, but the next method returns null.
this is my code in the AM:
    public Row getPerson() {
        Row row = null;
        ViewObject vo = getPersonsView1();
        vo.setNamedWhereClauseParam("p_login_id", getUserPrincipalName());
        vo.executeQuery();
        System.out.println("rows:" + vo.getEstimatedRowCount());
        if (vo.hasNext())
           row = vo.next();
        return row;
    }and the console log:
06/09/15 10:37:57 [513] select person_id,
login_id,
orig_system_id,
person_type,
title,
preferred_name,
preferred_name ||' '||surname full_name,
first_name,
other_names,
surname,
phone_work,
email_address
from sys_persons
where person_type = 'Staff'
and login_id = :p_login_id
06/09/15 10:37:57 [514] Bind params for ViewObject: PersonsView1
06/09/15 10:37:57 [515] Binding null of type 12 for "p_login_id"
06/09/15 10:37:57 [516] *** DCDataControl.sync() called from :DCBindingContainer.refresh
06/09/15 10:37:57 [517] *** DCDataControl.sync() called from :DCBindingContainer.refresh
06/09/15 10:37:57 [518] **** refreshControl() for BindingContainer :rft_ConsolePageDef
06/09/15 10:37:57 [519] *** DCDataControl.sync() called from :DCBindingContainer.refresh
06/09/15 10:37:57 [520] *** DCDataControl.sync() called from :DCBindingContainer.refresh
06/09/15 10:38:00 [521] Column count: 12
06/09/15 10:38:00 [522] ViewObject: PersonsView1 Reusing defined prepared Statement
06/09/15 10:38:00 [523] Bind params for ViewObject: PersonsView1
06/09/15 10:38:00 [524] Binding param "p_login_id": banstey
06/09/15 10:38:00 rows:1
Source breakpoint occurred at line 38 of SystemServiceImpl.java.Note above System.out.println("rows:" + vo.getEstimatedRowCount()); returns:
06/09/15 10:38:00 rows:1
but when i debug with a break point in the above method if (vo.hasNext()) returns false.
I have tried doing row = vo.next(); without the if statement, but row still evaluates to null.
The VO returns one record in the BC4J tester and I have this exact method and VO defined in another project and it works there. Tearing my hair out with this one...
Brenden

try RowSetIterator instead,
RowSetIterator it = vo.createRowSetIterator("myIt");
if(it.hasNext())
MyVORowImpl row = (MyVORowImpl)it.next()
//don't forget close the RowSetIterator
I guess you use the VO.next(), but the current row of the VO is the one you get from db, and his next is null...

Finding Application Module name in read-only view object classes

Hi all,
I have a fairly basic question about finding application module name when we are coding in ViewObject java classes.
I want to know how can I obtain <<application module>> NAME that our current view object is contained in it at run-time. I think there should be a way to find current application module NAME, when we are in ViewObject classes including View Object, View Row or view object definition classes (I've overridden all mentioned classes).
I should notify that since our view object is read-only I may not count on view object's entity classes, coz as you know a read-only view object don't have any entity in it!
So, if you have any idea about finding current application module name in view object java classes please let me know.
Appreciate for your replies,
Nasser

Thanks guy, it was helpful:)
Now i can access application module name through viewObject classes.
But another question is raised...sorry if i m boring:( I promise its the final question ;)
Is there a way to get application module name in an extended version of JboException class?
Thanks again for your reply:)
Nasser

ADF View Criteria on a Read Only View Object

Hi,
I have created a read only view object using a query. The query consists of analytical functions to fetch the AVG values dynamically.
So far my approach worked fine.
I want the Average values in my query to be calculated dynamically based on the certain view criteria.
But after applying view criteria, my query is formulated as shown below:
SELECT * FROM (SELECT   RECEIVED_YEAR,
           WEEK_NO,
           NO_RECEIVED,
           NO_STARTED,
           ROUND (TO_NUMBER (REPLACE (AVG_HRS_TO_START, ':', '.')),2) AVG_HRS_TO_START,
           ROUND (AVG (TO_NUMBER (REPLACE (AVG_HRS_TO_START, ':', '.'))) OVER (ORDER BY RECEIVED_YEAR),2)              OVERALL_AVG_HRS,
           GOAL_HRS,
           ROUND (AVG (NO_STARTED) OVER (ORDER BY RECEIVED_YEAR), 2) AVG_NO_STARTED,
           ROUND (AVG (NO_RECEIVED) OVER (ORDER BY RECEIVED_YEAR), 2) AVG_NO_RECEIVED
           FROM ORDERS_RCPT_TO_START_VW
ORDER BY RECEIVED_YEAR, WEEK_NO) QRSLT WHERE ( ( ( ( (RECEIVED_YEAR = :RecdYear ) AND (WEEK_NO <= :weekNo ) ) ) ) )
As per this query, it is calculating the Average values first and then applying filter criteria rather than applying the filter criteria and calculating average values.
Please help me on this.

Entity objects are used to update/delete/insert data to the database.
If all your base DB object offers is read then just create a read only view object.

Updatable view and Read only view

Jdev version 11.1.1.6
1. Can we use an updatable view instead of readonly view for LOVs?
2. In my use case, I am having a panel-tabbed component. I create Region in the first tab & create Countries in the second tab. If I use a LOV for Regions based on the read-only view, then the data created & COMMITTED in the first tab is not getting reflected in the LOV in the second tab. But, if I use an updatable view for the Region field's LOV, then the LOV works fine. But, want to know if it is fine to use an updatable view for LOVs.

Quotation from the developer guide
>
Best Practice: When you need to create a read-only view object for
data lookup, you should use the entity-based view object and deselect
the Updatable option in the Entity Objects page of the view object
overview editor.
>
>
View objects can either be related to underlying entity objects or not. When a view
object is related to one or more underlying entity objects the default behavior supports
creating new rows and modifying or removing queried rows. However, the update
feature can be disabled by deselecting Updatable in the overview editor for the
entity-based view object
>
So the answer for your first question is Yes

Get var from InputText based on a "read only view"

Hi.
I have build some read only views from DB.
All my views are linked.And the Data of each View is shown with " selectOneChoice" or "inputText".
So far so good.
But now my 1.problem.
How can I get the value of the inputText ( coordinates" lat , long ") in a var to use it with a google maps function like
map.addOverlay(createMarker(new GLatLng(lat,long)))
2. problem
how can i change the readout value of the inputText from[i] 51,2456 to 51.2456 for example
Hope for your help!
Chris

Hi,
Yes, I'am talking about ViewObjects in ADF Business Components.
Version view:
ADF Business Components     10.1.3.41.57
BPEL Designer     10.1.3.3.0 (Build 070615.0525)
CVS Version     Internal to Oracle JDeveloper (client-only)
Java(TM) Platform     1.5.0_06
Oracle IDE     10.1.3.41.57
Struts Modeler Version     10.1.3.41.57
UML Modelers Version     10.1.3.41.57
Versioning Support     10.1.3.41.57
For UserInterface I'am using "Web Tier--->JSF--->JSF JSP
I've got 5 read only views: Region, Country, City, Location and Koord ( including all coordinates of Location)
Now I want to show a marker in googleMaps with these coordinates but it doesn't work.
function load() {
if (GBrowserIsCompatible()) {
var map = new GMap2(document.getElementById("map"));
map.addControl(new GSmallMapControl());
map.addControl(new GMapTypeControl());
map.setCenter(new GLatLng(51,6),1);
var Lat;
var Longi;
here starts my problem
map.addOverlay(createMarker(new GLatLng(Lat,Longi))) } }
</script>
<afh:body onload="load()" onunload="GUnload()">
<af:messages/>
<af:form id="frm">
</input>
<af:selectOneChoice id="navList1" autoSubmit="true"
value="#{bindings.LolaRegionV1.inputValue}"
label="#{bindings.LolaRegionV1.label}">
<f:selectItems value="#{bindings.LolaRegionV1.items}"/>
</af:selectOneChoice>
<af:inputText value="#{bindings.LolaKoordV1Lat1.inputValue}"
label="#{bindings.LolaKoordV1Lat1.label}"
required="#{bindings.LolaKoordV1Lat1.mandatory}"
columns="#{bindings.LolaKoordV1Lat1.displayWidth}"
partialTriggers="navList4" id="input1">
<af:validator binding="#{bindings.LolaKoordV1Lat1.validator}"/>
<f:convertNumber groupingUsed="false"
pattern="#{bindings.LolaKoordV1Lat1.format}"/>
</af:inputText>
<af:inputText value="#{bindings.LolaKoordV1Longi.inputValue}"
label="#{bindings.LolaKoordV1Longi.label}"
required="#{bindings.LolaKoordV1Longi.mandatory}"
columns="#{bindings.LolaKoordV1Longi.displayWidth}"
partialTriggers="navList4" id="input2">
<af:validator binding="#{bindings.LolaKoordV1Longi.validator}"/>
<f:convertNumber groupingUsed="false"
pattern="#{bindings.LolaKoordV1Longi.format}"/>
</af:inputText>
</af:form>
I cant'*t give out the value of Lat , Longi to show the Marker.But a simple example like
var x;
var y;
x = "51";
y = "6";
map.addOverlay(createMarker(new GLatLng(x,y)))
is running.
Thank you for help!
Christian
Message was edited by:
user585675
Message was edited by:
user585675

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

Status Failure -lo exception:network adapter could not establish connection

Hi, installed SQL DEVELOPER today and its driving me mad... I am getting this error
Status Failure -lo exception:network adapter could not establish connection.
Basic tab I have all the right information, tried test gives same error...
hostname ajas
port 1521
sid altaf
TNS
Network alias altaf
connect identifier altaf(TRIED SINCE NETW ALIAS DIDNT WORK)
went to TNS tab and from the list selected the right entry for NETWORK ALIAS,tried test still same error... tested with connect identifier still same error...went to Advanced entered this string jdbc:oracle:thin:@ajas:1521:altaf ..... still same error...what the hell is wrong...here is the tnsnames.ora entry ...
ALTAF =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = AJAS)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = altaf)
by the way I am able to connect with sql*plus ... lsnrctl gives the lsnr so thats running... tnslsnr is also running...also installed the latest java sdk i.e 1.5... i have set new path to point to this new java.exe i.e 1.5 one... this is really crazy and havent see such probs in any tools i have ever used and that too using it in normal pc ... God knows what will happen if used for remote db's....
here is listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = AJAS)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = altaf)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = altaf)
no one seems to have answer for this... there are all kinds of strange replies for this problem.... anyone has solved this prob plz reply....
Message was edited by:
ajashadi

I've had the same problem when I installed the latest version of SQL developer (1.2.1.32.13) on a machine that still had an older, working version. My problem went away when I changed from an IP name to an IP address. on the connection setup window.

The document "view.do.pdf" could not be exported as "view.do.pdf".

Just recently I have been getting the following message when trying to safe a document as a pdf "The document “view.do.pdf” could not be exported as “view.do.pdf”. I updated all of my software and cannot figure out why I cannot save a document from the web as a pdf.
Thank you,
Don

How exactly are you trying to Export it?
Can you right click or control+click on it & use Save As... ?

MUST SPECIFY TABLE TO SELECT FROM ,2 RECEIVED ALERTS COULD NOT BE PREPARED

**Dear All, I get this Error"MUST SPECIFY TABLE TO SELECT FROM ,2 RECEIVED ALERTS COULD NOT BE PREPARED"** Please help me solve this
SELECT T1.AcctCode, T1.AcctName FROM OACT T1 WHERE (T1.AcctCode ='ACACBB0001' OR T1.AcctCode ='ACACBBBP01' OR T1.AcctCode ='ACACBBBP02' OR T1.AcctCode ='ACACBBBP03' OR T1.AcctCode ='ACACBBBP04' OR T1.AcctCode ='LLFSLCC001' OR T1.AcctCode ='LLFSLCC002' OR T1.AcctCode ='LLFSLTL001' OR T1.AcctCode ='LLFULFO001')
AND T1.AcctCode NOT IN (SELECT T0.Account FROM JDT1 T0 WHERE T0.REFDATE<='[%0]' AND (T0.Account ='ACACBB0001' OR T0.Account ='ACACBBBP01' OR T0.Account ='ACACBBBP02' OR T0.Account ='ACACBBBP03' OR T0.Account ='ACACBBBP04' OR T0.Account ='LLFSLCC001' OR T0.Account ='LLFSLCC002' OR T0.Account ='LLFSLTL001' OR T0.Account ='LLFULFO001' ) )
Regrds
MD Zubair

change the query as
declare @date datetime
SELECT @date = T0.refdate FROM JDT1 T0 WHERE T0.REFDATE ='[%0]'
SELECT T1.AcctCode, T1.AcctName FROM OACT T1 WHERE (T1.AcctCode ='ACACBB0001' OR T1.AcctCode ='ACACBBBP01' OR T1.AcctCode ='ACACBBBP02' OR T1.AcctCode ='ACACBBBP03' OR T1.AcctCode ='ACACBBBP04' OR T1.AcctCode ='LLFSLCC001' OR T1.AcctCode ='LLFSLCC002' OR T1.AcctCode ='LLFSLTL001' OR T1.AcctCode ='LLFULFO001')
AND T1.AcctCode NOT IN (SELECT T0.Account FROM JDT1 T0 WHERE T0.REFDATE<=@date AND (T0.Account ='ACACBB0001' OR T0.Account ='ACACBBBP01' OR T0.Account ='ACACBBBP02' OR T0.Account ='ACACBBBP03' OR T0.Account ='ACACBBBP04' OR T0.Account ='LLFSLCC001' OR T0.Account ='LLFSLCC002' OR T0.Account ='LLFSLTL001' OR T0.Account ='LLFULFO001' ) )

HI I did not (nor did anyone in my household)purchace this app how can I get a refund? My ipod touch is a 3rd gen.so it does not have a camera. I did buy a camera app one day last week only to find I could not use it. This particular purchace was $1.98.

HI,
I did not (nor did anyone in my household)purchace this app how can I get a refund? My ipod touch is a 3rd gen.so it does not have a camera. I did buy a camera app one day last week only to find I could not use it. This particular purchace was $1.98.

You can try contacting apple customer service http://www.apple.com/contact but usually all app purchases are final and not refundable.

The Image viewer flash element could not be found

The image viewer flash element could not be found. What
should I do? Any plug in exists or is it mistake in program? Help
me, please. Thx Joe

Hi,
The issue here is the mapping of the interface to the service in question, and usually points to a possible mistype or rename of something within your service architecture.
You need to make sure your namespace and service name here match your service name itself.
For detailed information, you could refer to:
https://haddicus.wordpress.com/2011/06/06/service-attribute-value-not-found-wcf-services/
http://stackoverflow.com/questions/9557221/the-type-restservice-weddingservice-provided-as-the-service-attribute-value-i
Regards

Specify maintenance status 'read only'. View /TDM/9_... could not be activa

Similar Messages

Maybe you are looking for