Specify "OTHER" location in Finder

Hello.
Shortly after installing Leopard I noticed that the property allowing one to fine-tune the whereabouts of a file in the Finder (not to a single location, nor to all, but to a number of specific ones) has been omitted. This property was available in Tiger (Command-F, then choose "Other", before, if need be, pinpointing the file type, creation date, etc.) to contain the search criteria to the specified locations. Leopard, instead, only allows you to either choose the directory wherefrom the "find" command was launched, or the whole of "This Mac" (e.g., the default "Macintosh HD" drive and all the drives (including optical) mounted). Well, that's a shame: I'd personally resorted to using the useful faculty in question in Tiger very often, and found it very useful.
Also, the drop-down menus (specifying the filetype, creator, date created, contents, keyword and so on...) do not all work equally well. For instance, choosing the "Email addresses" yields no result even when the file with a given name (keyword, etc.) is contained in a (number of) emails from the given email address. As well-implemented as the search criteria specification appears at the first sight (an excellent idea to elaborate even further on), it often doesn't work at all.
I hope Apple does come across this or similar posts and rectifies the issue.
cordially,
Art Khachatrian

I hope Apple does come across this or similar posts and rectifies the issue.
This is a forum for users and there is no expectation that Apple will "come across" anything in it. To provide feedback to Apple go to http://www.apple.com/feedback/macosx.html
Larry Nebel

Similar Messages

Using External_Stage can we specify a location other than staging dir

While using external stage mode for weblogic(I am trying for weblogic92)we must manually copy the deployment files(web app) to the staging directory of each target server before deployment.
Is there a option to copy the deployment files to another location other than Server's staging directory? To be more specific can I specify a location which is outside the server?
Secondly, with no-stage option of weblogic we can have a external location for the web application, but in case of the cluster,
this location has to be either shared or
the secondary node should have the same location(path to the web application) as that of the primary server.
Here is my config.xml entry of the primary node.
<app-deployment>
<name>TestWebApp</name>
<target>TestCluster</target>
<module-type>war</module-type>
<source-path>C:\TestWebApp\TestWebApp.war</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
Here there is only one source path for the entire Cluster. So if both of the server nodes have a valid location(C:\TestWebApp\TestWebApp.war), then the deployment will be fine on a running server. But on the second server node, if the Web app does not exists on that location, deployment will fail.
When we share the location the concept of cluster is lost. If go with the second option then the user is restricted to have the same path on second node also.
Is there any way to specify differnt locations(of the same web app) for different servers in the Cluster?

A few points of clarity:
1) Session starts in consumer group LOGIN_GROUP. That does not have session queueing since queueing sessions at log on time results in the user experience of a hung session, which we cannot have. Whether service X is used to get it there or something besides services is fine; how is not a concern at this point.
2) Session moves to consumer group MAIN_GROUP after about 5 CPU seconds in the LOGIN_GROUP. We want to do this because the MAIN_GROUP has session queuing, which we want for most sessions after they have the unqueued login experience per point #1.
3) Session moves to consumer group SLOW_GROUP after about 60 CPU seconds in the MAIN_GROUP (or some number of seconds; exact numbers are not the main focus here). We want this because we want long-running queries to be downgraded. However, we don't want to leave the session there since the query is the thing that is running long, so we want the session to get back to MAIN_GROUP when it is done. However, if we use SWITCH_FOR_CALL when going to the SLOW_GROUP, it will switch back to the LOGIN_GROUP. Which is the trouble--LOGIN_GROUP is an unqueued group, so we don't get the desired session queueing.
4) The solution must be fully automated without any DBA intervation or application code. We cannot use appliation code as this solution is intended for BI users working in tools that have direct data access. Thus prevents the use of DBMS_SESSION as you stated in your posts. How would we do that switching in an automated fashion without application code?
5) We cannot put the DBMS_SESSION commands in a login trigger since that would switch groups to MAIN_GROUP and would again run the risk of queueing a session at login, which feels like a hung session to users and results in a bad user experience and help desk calls.
Thanks!

Is it possible to put xsl file at some other location except BPEL folder fo

Hi,
I want to put my xsl file in some location not in BPEL suitcase. If i use processXSLT function using full path. it thorws filenot found exception.
So does it mean i can not put my file at any other location and specify absolute file path?
Thanks,

Hi, I'm also developing for PPC platform on Oracle Lite. Did you consider deploying the application as a plain set of files? When I was making the decision whether to CAB or not to CAB, I decided not to use CAB deployment and deploy our application as a plain set of files with installation steps described in the setup.inf file you mentioned. We also perform updates frequently, but we almost never update all the modules - just one of two files at the moment which makes quite small amount of data in comarison with the huge CAB which would need to be transfered to the device if we use the CAB deployment.
The documentation contains some useful information about the setup.inf format - it's quite easy to understand and use. First of all you have to create a JAR package (which is just renamed zip file) containing your application files plus the setup.inf file and web.xml file. Than you have to publis this application using the mobile server web interface. After this initial step, mobile server creates a directory for your application in {OLITE_HOME}\mobile_oc4j\j2ee\mobileserver\applications\mobileserver. If you wish to publish a new version of your application than, you just copy the new files (or single CAB) and increment the version number in setup.inf file.
I think you can find setup.inf and web.xml samples in the forum's history. If you won't be able to find them, I can post some examples....

How to create a new folder at the specified FTP location

Hi everyone,
Please guide me for the following query:
How to create a new folder at the specified FTP location if the folder does not exists at that location through ABAP program.
Please guide.
Thanks and Regards
MP

Have a look at the function group SFTP. Use function module ftp_command to create the directory sending the mkdir command.
Use the where-used list to find sample programs.

Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

Hi, guys
I cannot view delegate mailbox in Outlook. Following is my configure.
I have two mailbox A-User and B-User
Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox.
Right click A-User's root inbox and select Properties -> Permission, select B-User and check "Folder visible".
Login Outlook as B-User on other computer, click File -> Account Settings -> Account Settings, select B-User and click Change -> More Settings -> Advanced, add A-User.
Now I can see a root A-User in Navigation Pane. But when I click it, it shows
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location."
or
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location. The operation failed. An object cannot be found".
I searched some solutions from internet, but all of them don't work. Could you give some suggestions?
Thanks.

Hi,
First, please double check if you have given the right permission to B-User on your step 2.
In addition, we can try to give a higher permission to the B-user to check the result.
Please feel free to post back and let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

Hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

Other than physically looking for it, no. It does not have WiFi.

How to specify the location of a new created BPEL project

Hello,
When I create a new Oracle BPEL project with the Eclipse BPEL designer plugin, the new project "ProjectName" is located by default in the folder c:\eclipse\eclipse\workspace\ProjectName. (I suppose that the Eclipse is installed in c:\eclipse)
The wizard doesn't allow the user to change the project location, the correspondin text field being disabled. Is there any possibility to specify a different location for the project?
I ask this beacuse I want to create a new CVS module that will contain the projects that I create in BPEL designer and I don't want to place them in c:\eclipse\eclipse\workspace folder.
Thank you in advance!
regards,
Marinel

When you open the eclipse, it asks you the workspace location and takes the default as "eclipse\bpelz_install\bin\workspace". You can always change the workspace location to point anywhere you want.
Else if you have already created the project and want to move to different location, then you can select the project and go to File->Move and move the project to any other location you want.

My location in Find My iPhone not clear.Fix the map

My location in find my iphone not clear..

Did you try with a different phone? Have you moved a WiFi hotspot recently? Are all locations wrong, or only one? You may have a hardware problem. Take the phone to an Apple store for evaluation. Make a reservation first: http://concierge.apple.com/reservation/us/en/techsupport/

How I Can Specify JDeveloper Location to Install BI Beans?

Hi Gurus, as others I am also new in OTN, I downloaded JDeveloper 10.1.3.10 and BI Beans and installing "Custom Option".
I unzipped JDeveloper files on C:\Oracle\JDevStudio\
During installation BI Beans on "Specify JDeveloper Location to Install BI Beans" page giving above path raise an error message "The JDeveloper was found is at your specified location is an unknown version. Please specify a full path to a supported version (10.1.2 or higher) of JDeveloper". Whereas I am using JDevelper (10.1.3.10). How I can solve this problem?
I will be thankful to you on your cooporation.

Did you receive any response to your question? I
have a customer running into the same issue.http://www.oracle.com/technology/software/products/bib/download.html
Important: You must install Oracle JDeveloper 10g 10.1.2.2 build 1929 prior to installing BI Beans 10.1.2.2. JDeveloper 10.1.2.2 is available in JDeveloper Archives. Note that JDeveloper 10.1.3 is currently not supported.

SAP AFS - VL10B delivery from specified storage location

Dear all,
I have created STO for an AFS material.
As this material is available in various storage locations of the supplying plant.
Now I am trying to create delivery through VL10B, entered the Purchase Order, Plant and specific location in the material tab, but system is not generating any outbound delivery in the background.
again, in VL10B, if I have not specified any storage location in the material tab, system is generating the Outbound delivery for multiple storage locations with reference to batch split.
How come system is not picking the specified storage location in VL10B transaction.
Can I specify the issuing storage location while creating the STO, so that during VL10B, automatically the system will pickup the same storage location.
thanks in advance,
urendra

Dear Urendra,
If you creating a delivery for an AFS material, system picks the stocks based on the allocation rule defined in the system. Hence first efine the allocation rule in the system.
To achieve the functionality of issuing stock in case of a STO from a
particular storage location kindly maintain the below customizing.
1) Go to transaction J3AS -> arun detail -> define allocation logic ->
stock sorting
3) Here maintain a stock sort rule .
5) To this sort rule you can assign fields in this case it would be
LGONR with field values EW and QA
6)Once that is done, give the priority to the storage location in
accordance to your requirement.
7) Assign this sort rule to the main Arun type following the
path J3AS-> ARun type-> here select Arun type and then under allocation tab
go to the allocation rule maintained , out here there is the option
stock sorting.
Once this is done the storage location picked would be in the order
of the above mentioned priority.
Only if there is no stock in storage location of higher priority
will the stock be then picked from storage location of lower priority.
I hope this helps.
Regards,
Rakesh

While trying to use airdrop, the files located in finder are not visable. What to do?

I would like to xfer some files from my macbook pro to my new imac desktop using airdrop. I get visibility of both computers using airdrop,
however all the files located in finder are hidden as soon as airdrop starts running.

Hi paulo23,
''Would it make a difference if I would delete firefox altogether and try fresh?''
It could not be ruled out it may help.
A clean reinstall may solve the issue and so could be tried but not as a first step and take care with what you do.
#First I suggest you '''back up your current profile'''. <br />Do this before trying even a new profile. You want to make sure you do not lose data such as bookmarks passwords or settings, or if you do that you may recover them. Put the backup folders and files somewhere safe outside Firefox profile or program paths. (Your Desktop will do)
#* [[Back up and restore information in Firefox profiles]]
#Next just try a clean additional '''test profile'''. And when it comes to trying to print again use safe mode, and make sure any and all Firefox Plugins are disabled.
#* [[Use the Profile Manager to create and remove Firefox profiles#w_creating-a-profile]]'''_creating-a-profile'''
#* If you are new to using multiple Firefox profiles then because we do not document this in the Sumo KB (other than for Thunderbird) you may be interested in reading my tips in two adjacent posts [/questions/990973#answer-548376] & [/questions/990973#answer-548377]
#* Also see
#** An similar simpler alternative but you will lose any extensions <br /> [[Reset Firefox preferences to troubleshoot and fix problems]]
#**[[Troubleshoot Firefox issues using Safe Mode]]
#** [[Disable or remove Add-ons#w_how-to-disable-plugins]]'''_how-to-disable-plugins'''
# If that failed to help then it is worth trying a '''clean install''' of Firefox and that involves trashing the firefox ''Application'' (Windows: deleting the program files) NOT the Firefox Profile.
#* Full instructions see [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox]]#w_5-reinstall-firefox

Specify different location of SQL*PLUS EDIT/SPOOL directory

Where can I specify the location of the SQL*PLUS edit/spool directory such that I can change it from the default? I'm running on Linux (Ubuntu 6.10) if that helps...

Check this Link :
Error while Invoking Editor
Regds.

Location emoticons Finder

Hello everyone,
I'm wondering where the emoticons are located in Finder ?
Thanks !

Hello QuickTimeKirk,
Thanks for your response. However, maybe I haven't been specific enough: I would like to find the files of the emoticons, themselves. Like in the old iChat app, where you could find them under /Applications/iChat/Contents/PlugIns/Standard.smileypack/Contents/Resources/.
I would like to add an emoticon myself to the system.
Thanks again.

Specify the location for any newly added column

Hi friends,
Is it possible in Oracle to specify the location for any newly added column. why it always goes to
the last , I want to add a new column at first.
If it is possible and anybody knows please tell me.
Thanks & Regards
Chandrakishore Bankhede

Hi Chandrakishore,
Not exactly a spatial question but the answer is "no" as far as I am aware.
TOAD for Oracle has a nice feature called "Rebuild Table" that provides a GUI interface for redefining and moving columns around. Basically it generates all the required DDL for you - it saves all the constraints, indexes, triggers, etc. Then it creates a new table with your changes, renames the old table with a suffix and replaces all the constraints, indexes, triggers on the new table. Most helpful.
However - see this makes the post spatial in nature :) - for as long as I have been around this feature of TOAD has not been able to handle SDO_GEOMETRY columns - failing with "ORA-22917: use VARRAY to define the storage clause". The good news is the new TOAD 10 now is free of this bug.
This is not meant to be a commercial for TOAD, I just don't know of any other product with this feature. Others may know of similar things perhaps or you can write a function yourself in PL/SQL.
Cheer,
Paul

My friend knows my location through find my iphone app without knowing my account password, how can this happens?

My friend knows my location using find my iphone app without knowing my account password, how can this happens?

A guess: your friend was standing beside you when this was demonstrated. There are several apps available (all described as "entertainment"). The app was simply showing where your friends iphone was, i.e. Right where you were. Your position cannot be tracked. The apps are meant for joking.

Specify "OTHER" location in Finder

Similar Messages

Maybe you are looking for