SPECIFY THE PACKAGE OR FLAG IT AS A LOCAL OBJECT

Dear Experts,
My info packages are getting failed for the Z data sources with the below given error message.
Please guide me to resolve this issue at the earliest, as it is related to production system.
Error Message:
The object R3TR AQQU SYSTBWGENER0SY000000000095 does not exist
Assign a package
Specify the package or flag it as a local object
Job cancelled after system exception ERROR_MESSAGE
Thanks and Regards,
Suresh Reddy.

Hi,
some notes/patches are applied your ECC. so its shows your objects are in $Tmp.
Your error indicates that name which it specified it exist in $TMP package.
How to check whether its in $tmp or not.
ECC side, RSA6--> double click on data source-->double click on extract structure--> menu go to--> direct object entry.
or
at BW prod, go to RSA1->transport conection,
Find your data source or source system and drag into right pane,
You can see package as $tmp.
Can you check at dev system, if its works well there,
please do the follow things.
1. Collect ecc data source into transports move up to prod.
2. Replicate transported data source from ECC prod to BW Prod.
3.Collect data source form bw dev into transports move upto prod.
4. Once your data source was active bw prod, try to run your info pack. it it works then no issue.
if its required you can transport whole further data flow like target,transformations,info pack and dtp.
Thanks

Similar Messages

Automatically adjust the transfer of keychains item in Login - Local objects

Hello I need to automatically adjust the transfer of keychains item in Login <-> Local objects but as a Local object using a different structure (sqlite encoded) command security does not work.

Hi Steve
Many thanks for that. Could I ask that
this kind of thing goes in the release
readme also.
Marc

How to change the Package of planning area and datasource to be transportab

Hi every body,
I av created a datasource for the xxx planning area and saved in $tmp which is local package and cannot be transportable .and i would like to transport the planning area along with the data source.But before transporting the planning area along with the data sourse i av to change the package of the data source.I am not able to understand where should i change the package of the planning area and datasouce.
Can any body help me out of this problem.
Can be rewarded.
Shashi

Hi alaxander,
Thanx for your reply but before tranporting a datasource i av to transport the planning area bcoz it is the source.so how can i change the package of the planning area which is in $tmp (local object).
Regards,
Shashik

[SOLVED] How to set the packager name for an AUR package?

Hi,
I'm maintaining an AUR package (fspcc), but I don't know how to set the name of the "packager" for that package.
E.g. when you request info about some package
$ pacman -Qi somepkg
there is a line
Packager: Unknown Packager
that specifies the packager.
How do I set this "Packager" info so that any user installing my package will see what I want?
Last edited by lisztinf (2014-04-13 13:39:43)

Thanks for the answer.
I guess that when I run
$ makepkg
in my local build directory, then "mkpkg" will build a package with the "Packager" info set accordingly to my local makepkg.conf.
However, I would like another user - with his own makepkg.conf - to see what I want when installing the package. How can I achieve this?
If I install an official package - say pacman itself - through ABS, I see the "Packager" field properly set for that official package. But certainly this info doesn't come from my local makepkg.conf. I would like the same behaviour for my package. Is it possible?

A question about creating packages as local objects in ABAP

Hi,
I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
Thanks in advane,
Kind Regards,
Dariyoosh

Thomas Zloch wrote:
Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
> Thomas
>
> P.S. this applies to the package name only, of course
Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
Once again, thank you very much for your help.
Kind Regards,
Dariyoosh

Script-change from local object to package

Hi Experts,
I have created a script.My problem is i have saved the script in local object,but i want in package.
How to change from local object to a package? Pls advice me on this issue.
With Regards,
Sharmila.S

Hi,
Go to SE03.
Go to Object Directory-->Change Object Directory Entries
Put the object type as FORM and press enter.
Then enter the sap script name in the object name.
Run and then change the package.
Regards,
Ankur Parab

Specify the full package path

Well, here is a real beginner question. How can i specify the full package path of SUNs java.io package? And another beginner question, where is this package located on my computer? (relative to my java sdk installion path of course)

Acctually I have a severe problem with leJOS. Here is my code:
import java.io.*;
import josx.rcxcomm.RCXBean;
public class PCModule
     public static void main( String[] args )
          recv();
     public static void recv()
          RCXBean rcxb = new RCXBean();
          try
               rcxb.setComPort("USB");
               while(true)
                    System.out.println( "Test" );
          catch( IOException e )
}This should compile fine, if lejosc would use the SUN java.io But it intends to use the own implementation of java.io and I really need to find a workaround to this problem because otherwise the code wont compile throwing the error, that the out symbol cannot be resolved.
Btw. this part of the program should listen to the mindstorms IR-Tower for messages of a RCX-Brig and wirte them to an output stream.
Isn't there a way to force lejosc to use the java.io package from sun?
P.S.: If I don't use the System.out-line everything is fine, so lejos is installed correctly and if write a java test app everything is fine, so the SUN Java SDK is installed correctly too.

Can I specify the "root package" of the Library?

Can I specify the "root package" of the Library (currently seemingly hardwired as "components") so that the generated code has sensible package names i.e. "com.adobe.buttons.HelloWorldButton" rather than "components.HelloWorldButton".

Hi Graeme,
Not from within Flash Catalyst. However, if you are taking your project into Flash Builder you will be able to customize the package names there.
Best,
Tanya

3201: The publisher display name FooBar, specified in the package doesn't match the publisher name, FooBar

I've updated a WP 8.0 application to WP 8.1 Silverlight. When I try to deploy a demo application I get the following error;
3201: The publisher display name, FooBar, specified in the package doesn’t match the publisher name,
FooBar, that’s associated with the developer account.
I've seen several cases with people encounter this issue and then solved by modifying WPAppManifest or the Packages file. My problem is that the
display name and publisher name is exactly the same. Both in the application xml files and in the error message displayed by windows phone store.
Any suggestions?

There is no requirement that source code files are in the correct directory structure. If you want javac to be able to automatically compile dependent files, then the source code must be in an appropriate structure and find-able from the classpath.
Also, when you use the -d option, javac will create an appropriate directory relative to the directory specified in the -d option. That's how it is supposed to work.
So it is working as designed and specified.

Removing the explicitly installed flag for all dependency packages

From what I gather, pacman -Rs won't remove any packages marked as explicitly installed, which causes a couple of problems for me:
Say I need to reinstall all my packages for whatever reason; they'll all be marked as explicitly installed, so from that point on I wouldn't be able to search for orphans.
There other case I can think of would be when I reinstall a dependency of some package for whatever reason, then later delete that top package with -Rs, that would mean the dependency and anything it depends on would remain on my system even if I don't really need it.
Does pacman support, or are there any scripts that will go through the package databse and mark all packages that are depended on by other packages as dependencies rather than explicitely installed? Basically reset the explicit flag for anything that isnt a leaf on the tree.

Hi
There are 2 ways in doing this, either by report filtering or by formula, i would highly suggest using a report filter, just click the funnel icon in your webi report and drag your flag object then select Not Equal to condition then select 0.
if you want to use a formula you can type in "=[Person Object] where([flag] = "0")". NOTE: only use "" if your flag is a dimension.
kindly tell me if I'm missing something.
Regards,
-John Vincent

How to specify the DB_MPOOL_CREATE flag?

In berkeley docs it said the if the flag DB_MPOOL_CREATE is not specify than you might get DB_PAFGE_NOT_FOUND error. - i got this exception and i want to avoid getting it again. how and where can i specify the flag DB_MPOOL_CREATE ?

Hi,
What is the call that returns the DB_PAGE_NOTFOUND error? Is it a DB_MPOOLFILE->get() call or some other method call?
I don't see why you would need to change anything in the source code. If the DB_PAGE_NOTFOUND error is returned when doing a DB_MPOOLFILE->get() call then you're trying to retrieve a database page that doesn't exist; if you're doing the call and specify the DB_MPOOL_CREATE flag you're instructing BDB to create that database page if it doesn't exist.
If this error is returned by some other call, for example, when doing a get on a database either using the database handle or a cursor, then the database's integrity may have been affected. You can verify the database to see if it's consistent using either the db_verify utility or the DB->verify() method.
Regards,
Andrei

Creative Cloud Enterprise: Is there a way to choose where the package temp files are downloaded?

I am an Enterprise Admin and have to use a Windows computer to download and create different Creative Cloud packages. The temp package files first download to the C:\ (system drive) and then the actual package in the location you specified; usually on another drive/partition. I have to make the C:\ partition (by re-partitioning) much larger than normal size in order to make temp package files to fit if I don't the C:\ drive fills up and the package creation just stops/fails with no messages displayed. Could an option be made to direct where you want the the temp package files to be held such as selecting a different hard drive/partition to store them?
I create both 32 and 64 bit CC packages.

Hi JohnBNO,
You can change the CC cache location. Please refer the article: http://helpx.adobe.com/creative-cloud/packager/creating-packages.html.
Regards,
Romit Sinha

The package failed to load due to error 0xC0011008

I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects
to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
---> System.Runtime.InteropServices.COMException (0xC0011008): The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was
passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
   at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadPackage(String FileName, Boolean loadNeutral, IDTSEvents100 pEvents)
   at Microsoft.SqlServer.Dts.Runtime.Application.LoadPackage(String fileName, IDTSEvents events, Boolean loadNeutral)
   --- End of inner exception stack trace ---
   at ST_0f39f89613ca43e9a6660953aa72fa2c.csproj.ScriptMain.Main()
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig,       MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Task failed: ST_Gen_Pkg_Src_SqlServ
Warning: 0x80019002 at CreateDynSSIS_DB_RunDynSSiSDB: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" finished: Failure.
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
Any help would be great! I've done a bit of Googling on the topic already.. and nothing has worked so far.

Hi,
Reason for the error: Old
version of the DTEXEC is picked up by SQL Server instead of the new one.
Refer this link for more info
THE PACKAGE FAILED TO LOAD DUE TO ERROR 0XC0011008
Hope this info Helps

Output error:the name of the package "greet" does not reflect the location of this file...

output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?

The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

Output Error When Debugging the Package

Hi,
I just created my first SSIS Package, with OLE DB Connection pointing to our Oracle server and using SQL SERVER Destination. When I Debug, I get the following error:
SSIS package "C:\Users\Documents\SQL Server Management Studio\Packageload.dtsx" starting.
Information: 0x4004300A at Load Season, SSIS.Pipeline: Validation phase is beginning.
Error: 0xC0209303 at Packageload, Connection manager "ABCDEF": The requested OLE DB provider MSDAORA.1 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC020801C at Load Season, OLE DB Source [46]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ABCDEF" failed with error code 0xC0209303. There may
be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Load Season, SSIS.Pipeline: OLE DB Source failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Load Season, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Load Season: There were errors during task validation.
Warning: 0x80019002 at Packageload: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "C:\Users\Documents\SQL Server Management Studio\Packageload.dtsx" finished: Failure.
I tried setting the DelayValidation property to True, but still getting same error.
Thanks
Parul

Hi Parul,
Regarding the error “Unable to bulk copy data. You may need to run this package as an administrator”, it is described in the KB article
http://support.microsoft.com/kb/2009672:
On systems where UAC is enabled, when an application (like SSIS) is launched by an account that is a member of the Administrators group, it gets two security tokens, one a low privileged token and another an elevated token. The elevated token is only
used when the application is explicitly run under an Administrator account by choosing “Run as Administrator” option. By default SSIS always uses the low privileged token resulting in a failure when connecting to a SQL Destination.
The solution is launch the tool (SQL Server Management Studio or Business Intelligence Development Studio or DTExecUI.exe or Command Prompt) as administrator.
Regarding the original error “The requested OLE DB provider MSDAORA.1 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode”, it is because Microsoft OLE DB Provider for Oracle has only 32-bit version. To avoid this issue,
you can either run the package in 32-bit runtime mode as you have done or install the 64-bit Oracle Provider for OLE DB.
If you use Enterprise edition of SSIS 2008 or higher, you can also install the Microsoft Connector for Oracle by Attunity:
http://www.microsoft.com/en-in/download/details.aspx?id=29283
Regards,
Mike Yin
TechNet Community Support

SPECIFY THE PACKAGE OR FLAG IT AS A LOCAL OBJECT

Similar Messages

Maybe you are looking for