Specifying exact window size for graphics
I have a website that is going to be a portfolio site. I want
to be able to click on a thumbnail image and have a larger image of
the same image show up in a new browser window, but I want to be
able to control the size of the window, so that my image isn't
shown in the entire browser window. I can't seem to figure this
out. Does anyone know how to do this in Dreamweaver 8?
Thanks!
Hi --
Take a look at this DW extension:
http://www.flevooware.nl/dreamweaver/extdetails.asp?extID=8
It's quite flexible and allows you to determine the size and
positin of the
new window.
HTH
John
"siesky" <[email protected]> wrote in
message
news:fhk8eb$lqg$[email protected]..
>I have a website that is going to be a portfolio site. I
want to be able to
> click on a thumbnail image and have a larger image of
the same image show
> up in
> a new browser window, but I want to be able to control
the size of the
> window,
> so that my image isn't shown in the entire browser
window. I can't seem to
> figure this out. Does anyone know how to do this in
Dreamweaver 8?
> Thanks!
>
Similar Messages
-
Is it possible to specify the window size when using opendocument?
Does anyone know how to specify the window size for a child report launched from a hyperlink that uses opendocument? Is it possible?
I have looked all of the posts I could find and have not found anything that would work, please help.So I have come up with the following URL based on the suggestions in this post, but it still isn't doing what I would like it to.
It does launch a smaller window but posts the child report in the same window. Is there something else I should do?
Thanks for your help. -
Window size for day, week, month
In Tiger you could have a unique window size for the day view, week view, and month view. Is this option gone with Leopard? I liked viewing my day, week, and month in different size windows just by clicking on the buttons and having it go to that view.
Hi..
try below code.
CALL FUNCTION 'FLTP_CHAR_CONVERSION_FROM_SI'
EXPORTING
char_unit = <W_MMPT-ZYKL1>
decimals = 0
exponent = 0
fltp_value_si = <W_MMPT-ZEIEH >
indicator_value = ‘X’
masc_symbol = ' '
IMPORTING
char_value = <res__number_days>.
regards.
laxman -
Customize window size for HTML Help?
My .CHM file opens up in a ridiculously tiny window, and I
can't seem to change that from within Robohelp. I saw some
information on Rick Steve's site about customizing window sizes for
Webhelp and Flashhelp. I'm hoping there's a similar technique
available for HTML help.
Thanks!In Project Manager, double click Windows and then the window
you use. There should be fields for setting the size. If not, check
that HTML is your primary output and then create a new window, then
you should see the fields. -
How to set window size for target="I_blank"
when viewing a graphic file (only) in a blank window, how do
I set the
window size?
Also, what is the target="ImageWindow" command? I can find
very
little info on it.
ThanksYou're welcome - for what it's worth, I use the Kaosweaver
extension and
have heard good things about 'justso' as well., You can't
beat the price
and you get your moneys' worth, I use mine nearly every day.
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.macromedia.com/devnet/dreamweaver/css.html
- CSS Tutorials
"Canned Heat" <[email protected]> wrote in message
news:[email protected]..
> In fact, they just might! Thanks, I'll look into them.
>
> On Wed, 26 Apr 2006 13:20:10 +1000, ".: Nadia :. *ACE*"
> <[email protected]> wrote:
>
>>Would any of these extensions work for you?
>>they open a picture window to the exact dimensions of
your graphic.
>>
>>Great free extension:
>>www.dreamweaverfever.com/grow/
>>
>>another couple of extensions - commercial though:
>>
http://kaosweaver.com/extensions/details.php?id=62&cid=7
>>
>>and:
>>Just So Picture Window -
>>www.valleywebdesigns.com/vwd_dw_JSPW.htm
> -
Set custom default window size for opening Preview?
I'm using a terminal-based text editor, and when I compile LaTeX files, I have a script to open the compiled pdf in Preview. The trouble is that Preview opens in the same default dimensions every time, which covers up other applications I have open.
It's not a huge deal, but it would be nice to have Preview open flushed right and as half the width of the screen every time. Since I'm opening and closing it so often, moving it and resizing it every time gets really annoying.
I realize this isn't a built-in option for Preview, but is there any way of doing it using Terminal or otherwise? I've googled around and haven't found any satisfactory answers yet.
Thanks!Hi zazi,
Each window opened takes the size of the previous window opened.
Its possible to zoom in and out as well [https://support.mozilla.org/en-US/kb/font-size-and-zoom-increase-size-of-web-pages]
Also see:
[https://support.mozilla.org/en-US/kb/changes-toolbars-and-window-sizes-are-not-saved]
You can look at this extension to adjust the font size for the user interface.
Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer -
Forms Standard Canvas/Window Sizes for
Hello:
What are the standard sizes of Window and Canvas for Oracle Forms to run on 1024/768 Pixel or higher resolution? We like to size the screens such a way that the users can see the whole Form Window/Canvas in both Client Server as well as Browser Based (deployed using Application Server).
ThanksSteve's values were the sizes for the web-application.
I myself test this so:
I have a parameter-table with width and height. The WHEN-WINDOW-ACTIVATED trigger gets this parameters and resizes the window.
Now I change the values of the 2 parameters in the db with Oracle Raptor (e.g.) and after that I return in my runform - the trigger fires and resizes the window to the new parameters.
If you found the 2 parameters for your environment, you should place them for example in property classes in a reference template. All your new forms then reference this properties and so all your forms have the same layout.
that's it
Gerd -
I want to be able to set the window size so that after I build my executable and run my program only the important stuff will show up instead of miles of blank space. If anyone know how to do this let me know.
Cason Clagg
SwRI
LabView 7.1, Windows XPCasonSwRI wrote:
I would also like to be able to get rid of the run and continuously run button and bar for that matter. I found a check box for this but it changed my editor options. And if this is possible to remove the run button is there a way I can make a run button in my application?
Applications should be set to "run when openend". There is no purpose in a stopped application or a run button. Then simply hide the toolbar, menu bar, and even windows title bar as desired.
The scrollbars will not show when running, but they'll always show in edit mode. Did you run it? If you still think there is something wrong, please attach a simplified example. What LabVIEW version are you using?
LabVIEW Champion . Do more with less code and in less time . -
Main window size for HTML Help
Hello again
I have looked at the archives and despite thinking I had seen
this particular issue covered before, I could not find anything. I
generate a HTML Help File with RoboHelp for Word x5.0.1 and would
like to set the default window size as at the moment my Help File
opens in a rather small window. Also if a user maximises the
window, closes the Help File and re-opens it, it still opens in the
small windows, i.e. the size settings were not save upon closing
the file.
Can anybody help? I reckon there must be some place (I
noticed the existence of the Edit > Windows menu but it only
seems to apply to WinHelp) I can set this up.
Thank you.
Regards,In Project Manager, double click Windows and then the window
you use. There should be fields for setting the size. If not, check
that HTML is your primary output and then create a new window, then
you should see the fields. -
Getting exact window size and alignment
I need to record sequences in a predictable, reproducible
window so that I can record something later and insert it in an
existing animationwithout creating an alignment error with adjacent
slides. I'm documenting a web-based app at 800x600. When I record,
I put the red rectangle at the browser's upper-left, and move the
browser's lower-right corner to the correct position. No matter how
carefully I do this, it isn't accurate down to the pixel.
Aligning the recording with the app would require two kinds
of settings:
- Size of the app: I don't see a way to do this with a
browser and haven't seen it in other apps. A problem is that I'm
only recording the viewable frame in the browser, not the whole
browser window.
- Defining the window: I'd like to do it as in SnagIt, which
defines a window as just about any rectangle known to the system or
app. That way, the recording window has a precise relation to the
browser window.
These sizes and positions are all known to the software, but
are they controllable by users?Hi Christopher
Within Captivate, when you record, you have the option of
choosing to record the Application or to simply configure a
recording size. In this case, it sounds like you want the 800 x 600
size. So here is what you do. Click File > Record/Create >
New Project...
On the "New project options" dialog, choose Software
Simulation and "Custom Size". Then click OK.
Now you may click the Preset sizes button and choose the 800
x 600 Full Screen setting. This will set the red recording
rectangle to exactly 800 x 600 pixels.
Now for some magick. Click the drop-down where it says
"Optionally, select a window you'd like to record". Choose the
browser window. Once you do this, click the button labeled "Snap to
fit" and the browser should be resized and placed exactly inside
the red recording area.
Hopefully this helps a smidge... Rick -
Mac or Windows ? for graphic design
Hi, so next year I'm going to study graphic design and I'm going to use lots of programs like illustrator, indesign, photoshop... I've been in trouble all these years trying to fin the best computer for me. I don´t want to spend a lot of money in a laptop, i think I'ts better to invest more money in a desktop. I'll choose windows because of their prices (they are really cheap and with lots of memory..) and mac because every designer has a mac and i dont really know how to use it.
These are my 2 options :
1) Vaio fit 15" A - Flip pc Vaio tap 21" portable all-in-one desktop
core i5 core i7
8GB memory + 8GB memory
1TB hard drive 1 TB hard drive
NVIDIA gt 735M (2gb) intel hd graphics 4400
$1,250.00 $ 1,300.00
2) 13"Retina 21.5" imac 27"imac
8GB memory + 8GB memory OR 8GB memory
256GB flash storage 1TB hard drive 1TB hard drive
Intel Iris Graphics NVIDIA GT 750M (1GB) NVIDIA GT 755M
$1,499.00 $ 1,500.00 $1,800.00
IN the second option maybe it will be or the retina macbook pro or the macbook air.
I Don't really have a lot of money but if i have to invest in a good computer i will do it.
Hope you can help
thanksHi, so next year I'm going to study graphic design and I'm going to use lots of programs like illustrator, indesign, photoshop... I've been in trouble all these years trying to fin the best computer for me. I don´t want to spend a lot of money in a laptop, i think I'ts better to invest more money in a desktop. I'll choose windows because of their prices (they are really cheap and with lots of memory..) and mac because every designer has a mac and i dont really know how to use it.
These are my 2 options :
1) Vaio fit 15" A - Flip pc Vaio tap 21" portable all-in-one desktop
core i5 core i7
8GB memory + 8GB memory
1TB hard drive 1 TB hard drive
NVIDIA gt 735M (2gb) intel hd graphics 4400
$1,250.00 $ 1,300.00
2) 13"Retina 21.5" imac 27"imac
8GB memory + 8GB memory OR 8GB memory
256GB flash storage 1TB hard drive 1TB hard drive
Intel Iris Graphics NVIDIA GT 750M (1GB) NVIDIA GT 755M
$1,499.00 $ 1,500.00 $1,800.00
IN the second option maybe it will be or the retina macbook pro or the macbook air.
I Don't really have a lot of money but if i have to invest in a good computer i will do it.
Hope you can help
thanks -
Can you change flash player window size for a published Captivate course?
I am working on publishing a course with a FMR and, during testing, a lot of scrolling was required so I wanted to resize the window. Is this possible and, if so, how do I do it? Similar to Flash where you can publish to dimension %???
you can adjust the movie size in the html, with varying levels of success based on how much you scale.
edit the swf associated .htm file with a text editor and look for this line: var so = new SWFObject("project_name.swf", "Captivate", "641", "516", "10", "#CCCCCC"); In this case the 641 and 516 are the pixel dimensions. you can also change it to a %
I've never done it with FMR so I won't attest to how well it'll work. -
Window size for simple picture viewing
i know this has been discussed many times before here but i
can't find the answer i would like.
I have a regular personal webpage, you know, writings,
photos... what i want is (after my own experience of surfing and
how i like things to be) to be able to have my photos open in a new
window when you click on a thumbnail and continue surfing
next/previous from there. so that when the looking at the photos
are done you can just close the browser and continue in the
indexpage where you left from. i prefer not to use the open pop up
window browser, so i set my links to "_blank" but the template i
use for my photos isn't nice on a window that is maximized, so i
would like to resize it about to 650x650 as my photo frames are
600x600. by frames i mean, i made a decorative simple frame in wich
the photos are shown + previous/next buttons.
i hope i can get some help, thank you!There is an easier way, but you will need to spend a few
bucks -
http://www.valleywebdesigns.com
====> JustSo Picture Window 3.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Poussinka" <[email protected]> wrote in
message
news:elml54$2bp$[email protected]..
> Thanks for taking your time to answer. Is that the same
behaviour as used
> for
> pop up windows? I was hoping there would be an easier
way rather then
> adjusting
> each thumbnail in the album the same behaviour, I have a
lot of pictures!
> Is there a way of applying that behaviour (once size and
details chosen)
> at
> one click whenever I adjust a window? I'm thinking of
the "save as
> command"
> option in Fireworks. It makes it easy to apply the same
settings to all
> documents.
> -
How to change font size and window size for a pop-up Message Window?
Hello,
I am trying to display a very important message to alert our tester or any user when there is an emergency and they have to stop the test they are doing. I really desire to use larger message window/fonts to do this.
I have tried Display Message To User and converted it to SubVI, but no luck yet. I thought SubVI might work. But when it's displayed, the original Pop-up Message Window sat right on the SubVI panel. When I then clicked OK to close the Message Window, it closed the SubVI panel as well.
Are Text Indicator and its Visible Node the only way to make this happen? If yes, could someone teach me how to pause the program execution like Display Message To User when the program is waiting for user to click OK to continue?
Thanks So Much!
ShunHello,
Why don't you create your own vi and customize it.
See the attached example made for you
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL
Attachments:
Main4.vi 7 KB
messagebox.vi 15 KB -
Window Size for "Select a Topic" Window
Is there a way to change the default settings for the "Select
a Topic" window for the See Also control? I want the window to be a
little bigger. Right now it displays too small.
When creating a See Also control, you have an option in the
Display Options window of the wizard that allows you to choose
"Topics Found dialog." Therefore, when viewing the site help and
the user clicks the See Also control, a window displays that allows
the user to select a topic. This window is the one that I want to
enlarge just a little bit.The only stupid questions are the ones NOT asked.
Suggest that you cross-post over in the AppleScript Forums where the AS users hang out.
The following may also be of some interest to you:
QT Full Screen Mode Widget.
QT Full Screen
Full screen QuickTime Player
10.4: Watch fullscreen QuickTime movies via Automator
Maybe you are looking for
-
Reading text files in JSP pages
I want to know if it's possible to read a file and display it in an html:text area on a jsp page. What I have right now is: <html:file property="theFile" style="query-table-item" onclick="uploadFile(document.searchReportForm.theFile);"/> <html:reset
-
Tasks List not sending email to AD Groups
Hello, I have several Tasks list on my farm and all behave the same way. If I assign a task to an individual person, he will receive email notification. However, if I assign it to an Active Directory group, no email notification is sent. The AD group
-
Hi, We need to buid a range in a loop for some field. I declare the syntax as done in the report programe. But it throwing the error as the ranges cannt be used in class. Suggestion from system as use data type/like. Thanks in advance. Mohinder Sing
-
Xsl:output not yet implemented??
Is the xsl:output tag implemented in oracle xslt? I've tryed this in an xsl file: <xsl:output method="xml" encoding="ISO-8859-1" omit-xml-declaration="no" doctype-system="Segnatura.dtd" indent="yes" /> With another xslt processor produces this header
-
HT1657 when I rent a movie, can I download it to watch it offline?
when I rent a movie, can I download it to watch it offline? Thanks