Specifying folder to synchronize for Microsoft Office users
Hello,
We have a couple remote offices with users setup as mobile users.
These users are using Microsoft Office which saves a folder in ~/documents/Microsoft user data files
The remote offices connect to the main office using a slow connection ( Cable Modem and DSL ).
After doing some research I noticed that when a user has Microsoft Entourage opened the machine keep synchronizing with the main server.
I think that the reason why it is happening is because Entourage uses some kind of database ( PST file ) to run the software and a slightest changes in the PST file ( let's say an email being received ), initiates a synchonization.
All of this to ask:
- is there a way to filter out a subfolder inside the ~/Documents folder ?
- Or is there a way to schedule the synchronization to occur only one an hour ?
Thanks
It seems that we solved the issue by moving that folder somewhere else than the home folder then creating an alias in the ~/Documents folder.
Office thinks that the folder is still in ~/Documents and Mac OS only syncs the alias but not the content of the Office folder.
To reply to your answer though. As far as I have seen, anything that is in ~/Documents is being synchronized.
If there is a folder called Microsoft user Data that it 20 MB in there it will get synchronized as well.
Thanks
Similar Messages
-
How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office
I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreetHi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi 23 KB -
Hi All,
I originally posted this in the MS Support forums (http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/recieveing-onucappointmentgetvisible-error-in/1a40eca2-8cd1-40f1-a92f-cb08f0af6b72), but was directed over here.
I have recently upgraded an installation of Office 2010 to 2013 (both 64 bit) but am now receiving an error which says:
Window Title - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"
An error occured while calling the callback: "OnUCAppointmentGetVisible"
This seem to happen when I initially open a calender entry, and when I close the entry (most only the first time I close the entry).
I did have some developer tools installed for Office 2010 and VS 2010 which played around with Excel,2013 but I have now uninstalled these.
In addition, BCM 2010 was installed (but for the time being has been uninstalled), but I don't think that is the culprit.
The issue is being caused be an Outlook add-in. I have three COM add-in enabled, but the one causing the issue in the "Lync Meeting Add-in for Microsoft Office 2013".
We are currently trialling Lync in a demo installation which is in a different domain to any of the Exchange accounts, but should this cause a problem? For the time being I have disable this add-in.
Regards,
Chris
ChrisHi,
Sorry for my misunderstanding. If the issue is determined to be caused by Lync Meeting Add-in, please remove this add-in from Outlook, then go to Control Panel to repair Office 2013 program. After repairing,
this add-in would be automatically reinstalled. Please check whether the issue persists. About how to repair Office programs, please refer to:
http://office.microsoft.com/en-us/outlook-help/repair-office-programs-HA010357402.aspx
If the Lync Meeting Add-in is not automatically reinstalled, please try to manually add this add-in by the following steps:
1. Starting Outlook 2013 as an Administrator (right click, run as Admin).
2. Click File > Options > Add-ins, Manage Com Add-Ins Go... > Add..., C:\Program Files (x86)\Microsoft Office\Office15\UCAddin.dll, OK.
3. Close Outlook and start it as a normal user.
Regards,
Winnie Liang
TechNet Community Support -
How to find product key for Microsoft Office 2010?
I purchased an HP Pavilion dv6 a couple of years ago. At the time of purchase I also ordered a license for Microsoft Office 2010. The laptop came with Office already installed, and everything worked great for years.
Earlier this week I had to do a full system restore to get my laptop back in working order. I backed up all of my user files, found installers or original installation media for all of my software except for Office, and proceeded with the system restore.
I just got everything running again this morning. The system restore put a clean copy of the OS on my laptop, but Microsoft Office is gone. I've just about finished re-installing all of the other software, but I need some help with Office.
Since my laptop didn't come with installation media for Microsoft Office 2010 I'm trying to donwload it from here:
https://www2.downloadoffice2010.microsoft.com/usa/registerkey.aspx?culture=en-US&ref=pkc
It asks for a product key for Office 2010 in order to start the download. The product key for Microsoft Windows is on the bottom of my computer, but I can't find a product key for Office. (Before anyone asks, yes, this is the full version of Office 2010, and yes, I paid for it at the time of purchase of the laptop.) I kept all of the paperwork that came with the computer, but I can't find the Office product key anywhere in that packet. Is there somewhere else I should be looking for my product key?
Better yet, does HP still have a copy of my original purchase order for this laptop, and do they store product keys for the products they sell?
Thanks,
TomNeither HP nor Microsoft keep a record of the key that was issued. If you cannot find it in your documentation or emails I'm afraid you are out of luck and would have to purchase another key.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
Identity Synchronization for Microsoft 1.0 password synchronization failure
Hi
I�ve installed Identity Synchronization for Microsoft 1.0, and I can synchronize all attribute mail, telephonenumber etc � but I can not sync passwords! Between Active Directory and DS 5.2!!!
In the audit log of isw I have
CNN101 server1 "The controller has received the following inbound action from the accessor: Typ
e: UNKNOWN {Data Attrs: } {Other Attrs: samaccountname: user1 usnchanged: 1696 objectguid: NfQTjHdpAE+h4MS/2UxZzQ== dn: CN=user1 user,OU=util
i,DC=ldap,DC=com whenchanged: 20040825204423.0Z sn: user1 givenname: user}." (Action ID=CNN101-FE9B7FD2EE-6, SN=0)
but for a telephone number modification i have:
CNN101 server1 "The agent has received the following inbound action from the controller: Type: MODIFY SUL: SUL1 {Data Attrs: [REPL telephonenumber: 88888888888888]} {Other Attrs: samaccountname: user1 usnchanged: 2893 objectguid: ReawE
r7nqkSYpupcV/7V3w== dn: CN=user1 users,OU=utlisateurs,DC=fr,DC=ldap,DC=com whenchanged: 20040826194415.0Z}." (Action ID=CNN101-FE9BE2BDDF-26, S
N=1)
Can anybody help ?
I have installed one connector for AD , and one connector for DS and a subcomponent, the user are linked and resync with success.
ThanksHi,
ISW does not propagate the new password value itself when a password change is detected in Active Directory. The log message quoted does not show any error.
Note that passwords are not synchronized during resync. However, when resync'ing from Active Directory to Sun ONE Directory, you can invalidate the passwords of the Sun ONE Directory accounts using the -i flag. The invalidation will force on-demand password synchronization to start when a user with invalidated passwords attempts authentication to Sun ONE Directory.
I would also highly recommend following the instructions in the troubleshooting section of the product documentation.
Bertold -
LabVIEW Report Generation Toolkit for Microsoft Office
Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
StefanHi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel -
Add Report Generation toolkit for Microsoft Office in exe
Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi 132 KB
Untitled Project 1.zip 3841 KBHi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG 92 KB -
I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit? -
請問在NI網站上有NI LabVIEW Report Generation for microsoft office V 1.1.2
NI 網站上提供Report Generation for microsoft office 版本為1.1.3
可是我用的Lab View是8.0版,不適用。
找了許久都沒看到有1.1.2。舊的正版軟體不會放在網站上,請洽業務部
-
I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason PhillipsLookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls 120 KB
eb_rain_gauge_ss.csv 23 KB
EastBankHourlyRainReport.xls 28 KB -
Control checkbox form field in word with report generation toolkit for Microsoft office
Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video -
National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.
The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htmIt is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.
-
When I installed the recent updates for Microsoft Office 2011 for Mac, my iCal calendar was wiped out, as was the calendar on my iPhone. I'd rather use iCal than Office and was attempting to phase Office out altogether. Now, all of my information is on the Office calendar but not iCal. The iCloud version of my iCal calendar is not up to date. In any event, I couldn't figure out how to send that info to the iCal on my mac or my phone. How can I sync my Office calendar info to iCal? If that's not possible, how can I get my Office calendar to sync with my iPhone? All of my sync services are set up in iTunes and on my phone. This happened to me once before and I spent hours on the phone with Apple and on the web trying to work it out. I NEED MY CALENDAR!!!! PLEASE HELP!!!!!
As that's not an Apple product, you may get more help by using Microsoft's Office for Mac forums:
Office for Mac forums
The other concern I have is that Office 2011 requires an Intel-based Mac and you posted in the older iMac (pre-Intel or "PPC") forums. If you have an Intel-based iMac (Apple menu > About this Mac..." will say "Intel" if you do) then I think you'll get faster and more accurate ansers to other questiosn in the Apple forums for newer iMacs here:
iMac (Intel) -
I have a MacBook that I purchased in late 2007. It's been very good to me over the years. However, I'm been having various minor issues, and tonight I noticed that the screen goes to black at about 45° as I'm closing my laptop. In other situations I'd try to fix this myself, but right now I'm a Peace Corps Volunteer in rural South America and have limited access to the right tools, much less replacement parts. So instead I'm taking it as a sign that my trustworthy companion is about to give up the ghost and I should get a new computer now, instead of completely running this one into the ground and potentially losing important documents, photos, &c.
My question is simple: Does Time Machine and/or Migration Assistant successfully transfer licenses for Microsoft Office 2011 and for Adobe software?
My software installation disks are in a box in a basement in the United States. And since I'm not quite sure which box it is (last summer I did not see the need to label my own boxes), I'm not going to ask some unsuspecting friend or family member to dig through all my posessions to find an alphanumeric code or two, especially if I can just transfer/migrate the license without it.
Many thanks.Try the combo update on the old machine.
10.6.8 Combo Updater
If the 2 computers have the correct cable connections, try the Target Disk Mode.
Target Disc Mode -
Problem with adobe livecycle rights management es2 extension for microsoft office
occurs several times an error message in Microsoft Office Excel that says it has experienced a problem with the complement of adobe livecycle rights management es2 extension for microsoft office if the message has appeared several times should disable the add and check for an update.
will refer to this error? as it has sought to upgrade and there is no error and remains not only to excel but also for word.
thanks in advanceCurrently, the Rights Management ES Extensions for Microsoft Office plugin is only supported on English, French, Geman and Japanese versions of Office.
http://help.adobe.com/en_US/livecycle/8.2/lcrmext_releasenotes.htm#DocumentationSet
Steve
Maybe you are looking for
-
How can I transfer my app store purchases from one account to another?
Can I transfer my apps to a new iTunes account from my old one? How? Thanks.
-
Deploy vid SDM/J2EE hanged while Installing NW04 EP6 SR1
Hi, I am installing NW04 EP6 SR1 installation on Windows 2003 After starting SAPInst the installation hangs at Deploy vid SDM/J2EE at the log shows: PHASE 2006-11-15 17:07:39 Deploying SDAs (using SDM and SAP Java EE Engine). But not going further fr
-
I lost an xcel doc a couple of days ago. Tried to find the Library folder in Users but not there when I use Finder (even when I do shift-command-G). But when trying to upload a photo in iphoto I found the library folder in Users. I can see my doc in
-
Photoshop CS4 Extended Windows 7 Epson XP310 Printing Problem
I went through the resetting preference file as most of the solutions suggest. But put my preferences back because it made no difference. Photoshop print dialogue comes up fine when I'm printing a .jpg, or a .psd photograph in photoshop. The print
-
Sparsebundle file: how to recreate?
Very dears all, I have browsed many discussions but none seems to meet my problem: There is an iBook with a Lacie Disk (FW connected) for TimeMachine. Due to the big size of the Lacie Disk (350GB) I decided to also use TM for the MacBook. Then I used