Specifying JRE version in webpage (not using default set in Plugin)

Hiya,
I'm trying to set it up so our app loads a specific version of JRE (1.4.2_12) even though v 1.5 is installed on the machine and set as the default in the plugin.
Cant change the default from being v1.5 in the plugin as it is needed by other application on the system.
Does anyone know how I can specify which version of the JRE is used if it's even possible.
Thanks

Sun has finally documented Family ClassID with a link at the bottom of the JRE 1.6 release notes.
See this article:
http://java.sun.com/javase/6/webnotes/family-clsid.html

Similar Messages

Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

Hello Rob,
Welcome to the Apple Support Communities. You may have a contact that has a different ringtone assigned to it. Just navigate to the contact and see what ringtone is assigned to them.
iPhone: Ringtones
http://support.apple.com/kb/ta38610
Setting Ringtones
In addition to the default ringtone, you can assign individual ringtones to people in your contacts so that you can tell when a particular person calls.
Alternatively you can reset all settings in Settings > General > Reset > Reset All Settings. This would put your iPhone at factory default on everything settings wise and it does not touch the data on the phone
Regards,
-Norm G.

Can not use default screen saver with this version of Mac OS X

Hello,
I created a 10.6.4 image on a Mac Pro that I have installed on a new 27" iMac. Every thing works fine, as expected, except the screen savers (all Apple default). All screen savers appear in the list when booted off the Mac Pro, but when booted off the iMac, all but 2 disappear (Computer Name and Flurry). Also, the ones listed under Pictures show up, but when I try to use one it says "Can not use 'screen saver name' with this version of Mac OS X - Contact your vendor."
Also, the flurry screen saver runs extremely slow.
Unfortunately, I don't have another iMac to compare versions with, but I've compared with a new Macbook Pro and they are exactly the same. Is there a cache or a pref I can flush?

The old screensavers were about the first things that didn't work when moving to Snow Leopard, so my guess would be the iMac is booting in 32-bit vs 64-bit mode (or whichever mode is incompatible with your screensavers).

Specifying JRE version when starting CRM On Demand

I am trying to find a way to specify what jre version to use when logging into CCA. Our users have multiple jre version including newer versions that are not compatible with CCA. They have open java and disable the newer versions in order to get CCA to work. Of course this causes issues when they run other programs that require the newer versions (what a mess!).
Is this possible and can someone tell me how to do this? Any help would be greatly appreciated!
Thanks in advance!

This could be a problem with mounting of CD.
If you are not using Solaris Volume Management software. Execute the following commands as root user.
prompt> mkdir /cdrom
prompt> mount -r -F hsfs device_name /cdrom
prompt> exit
Regards
Ranga
null

Functions are not using default and will not validate without direct input

Hi. I am recreating all of our mappings (from 9.0 to 11g). And I am finding that any function that does not have a direct input for every input variable (rather than using the defaults as defined in the function) no longer will validate in OWB. It states that the input parameter is required but is not connected.
I have worked around this so far by adding Constants to pass the default values. I tried setting the default value in the property inspector window for each specific input parameter and this did not work, I still get the same error.
Is there a way to fix this? i am not happy with having to add all these constants, and I don't see why it is not using the defaults that are defined in the functions themselves. Any help is appreciated.
Thanks,
Kaisha

By the way for anyone who is curious....
The reason that the functions and sp's weren't working correctly was because I had movedthem into the new DB wrapped. I don't know why it caused this but when I did dbms_metadata and replaced them all unwrapped, and then reimported them into OWB all the mappings compiled.
K

Bex Query Designer not using default browser

hello all, i have disabled my Internet Explorer from being my default browser, however, when i use the Bex query designer and test, it initiates my Internet Explorer, and not my default Safari browser.
does anyone know where this setting is made ?
thanks
g

Skype uses IE ("Internet Explorer") as the browser interface on Windows based systems, this currently includes many windows such as the logon screen and add Contacts screen. This is fairly normal when a program uses browser logic internally, it is not changing what you use as a default browser.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Some font options not using default system language in font menus

Font options for Helvetica and Helvetica Neue (e.g. bold, italic, light, etc.) do not use the default system language (English) in the system wide font panel, or in font options within individual applications. Any suggestions as to how to correct this?

Roderick Ackermann1 wrote:
Font options for Helvetica and Helvetica Neue (e.g. bold, italic, light, etc.) do not use the default system language (English) in the system wide font panel, or in font options within individual applications. Any suggestions as to how to correct this?
Could you provide a screen shot of what you are seeing, either here or by email (tom at bluesky dot org)?

How can I set the DEFAULT setting on an effect to be MY default setting, not Garagebands default setting?

Hey
I usually use the same settings of reverb for most vocals I record (Just a small amount) and I have this saved as a setting, but is there anyway to make MY setting be the default setting whenever I add reverb and not be Garagebands default reverb setting?
This is so i dont have to go and select my setting each time?
I hope this makes sense.
thanks

This is more for mixing after all recording has been done. I generally record vocals with no effects on at all apart from a small amount of compression as its easier to hear errors in takes then. Currently its quicker than Cmd+D and copy/pasting into it. But still not as "Fast" as I would like by being able to choose myself what I always want as the default setting.

Reminder time in appointment does not match default set in options

I have an issue with the reminder time for new appointments that I accept from other users not matching the default set in my Options OR the time set by the sender. The default reminder time is set to 18 hours and the Reminder Time that the person
creating the appointment is using is also 18 hours. However, after I accept the appointment and then go into my Calendar and look at the appointment, it always says 15 minutes instead of 18 hours, which is far too short a time for most of my appointments.
I'm using Outlook 2013 under Windows 8.1. I've tried most of the suggestions I've found online including starting Outlook with the switches /cleanreminders and /resetfolders, neither of which helped??
Can anyone help???

It's a known bug.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Skype not using default browser

I recently uninstalled Skype to revert to an older version to get rid of the horrible "Skype Home" splash screen. While I found "Skype Home" useless and irritating, it was nothing compared to what I found out when I finished uninstalling.
These days it's quite common that when you're uninstalling a program, a browser window is launched to take you to the program's website, usually to show you some generic "we're sorry to see you leave" message. That's fair enough. However, most programs have the common courtesy to respect the user's default program settings and personal preferences and launch his default browser. This doesn't seem to be the case with Skype, for after uninstalling Skype I was shocked to see an Internet Explorer window opening.
Really, owned by Microsoft or no, there can be no excuse for such an insult to your customers, not to mention compromising their privacy and security by force-launching the unsafest and most disliked browser out there.
I am expecting a formal apology.

Skype uses IE ("Internet Explorer") as the browser interface on Windows based systems, this currently includes many windows such as the logon screen and add Contacts screen. This is fairly normal when a program uses browser logic internally, it is not changing what you use as a default browser.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

[Solved] How to specify which version of Java to use?

I have OpenJDK 7 as my default, but I also am trying to use Oracle's Java 7 for a specific program. I have installed jdk7-compat as suggested by the arch wiki, but I am unsure how to use it specifically.
java -version outputs:
OpenJDK Runtime Environment (IcedTea 2.5.0) (Arch Linux build 7.u60_2.5.0-2-x86_64)
OpenJDK 64-Bit Server VM (build 24.60-b09, mixed mode)
so OpenJDK is still the default, which is good. At the same time, how do I use Oracle's Java for a specific program?
Last edited by TheGuyWithTheFace (2014-07-01 16:50:01)

You have to create a bash script to execute that program, where you define your Java variables. For example, let's supposed your oracle Java is installed at /opt/java_1.6.14/ folder
#!/bin/bash
export JAVA_HOME=/opt/java_1.6.14/
export PATH=/opt/java_1.6.14/bin:$PATH
<your command>
Last edited by mgmartins (2014-07-01 08:29:27)

How do you apply a transition to multiple clips? NOT using default transition.

Using CS6
I have videos on one track and titles on another track. I want to apply dissolve to black for the videos and gradient wipe to the titles.
Right now I have to assign dip as the default transition, select all the video, and apply default transition. Then find the gradient wipe, change *that* to the new default transition, select all the titles, and apply default transitions. Then I have to go back and reset my default transition to gradient wipe since that's my "main" default transition.
Uhhhh... why can't we just select a bunch of clips and drag ANY transition to the selection and have it apply just like regular effects? Why force us to do this complicated singular default transition dance?

Hi D. Vivian,
d. vivan wrote:
What you need to do is to select the clips and enable trim (some red brackets will appear at the beginning or end of the clips).
I just marquee drag with the Roll tool to select the edit points.
d. vivan wrote:
Then, right click and Apply default transition.
Or use the keyboard shortcut: Ctrl + D (Windows) or CMD + D (Mac).
Thanks,
Kevin

How could I load image via a Form when it is in runtime by not using default block

1. How could I load image from my local computer to the database via a Form when it is in runtime?
2. And how to display the image stored in the database on a Form ?
Thanks buddy ~
A nice member answered this question already, but I want to know how could I do it by using manual create block instead of using database item directly~
Could anyone help me pls~

This is the only way I know right now:
1) Create this table
SQL> desc av_data
Name Null? Type
BLOB_ID NOT NULL NUMBER(10)
BLOB_TYPE NOT NULL VARCHAR2(10)
DESCRIPTION NOT NULL VARCHAR2(25)
BLOB_DATA LONG RAW
2) On form create a button with this 'when-btn-prssed' tgr:
DECLARE
     v_dirname          VARCHAR2(255);
     v_filename          VARCHAR2(255);
BEGIN
     v_dirname := 'C:\';
     v_filename := get_file_name(v_dirname, NULL,
     'Bitmap file (*.bmp)|*.bmp|'                    ||
     'JPEG file (*.jpg)|*.jpg|'          );
     IF v_filename IS NOT NULL THEN
read_image_file(v_filename, 'ANY',
'av_data_image.blob_data');
     END IF;
END;
3) Add this pre-insert trigger too :
:av_data_image.blob_type := 'IMAGE';
Sorry if this is not exactly the answer you're looking for.
Bob

Acrobat not using default driver settings (HP4250n)

I have my HP4250n default driver settings set to "duplex," (per the advanced settings under Printers and Faxes) but when I go to print in Acrobat Pro 9, I have to manually set the duplex each time to get it to work. I am using the HP PCL6 driver for Windows XP.
Does anyone know why only Acrobat fails to see the default settings?
Thanks, any help is appreciated.

Yes, i have struggled with this too.
I found that there are 2 places where you can set the standard settings for your printer. For some reason if only 1 is used, it wont work.
There is one at the general tab of your printer properties and one in the Advanced tab in the same printer properties.
When i make sure these 2 options have the same settings, it works for me.
Dont ask me why. Printer drivers work in mysterious ways if you ask me.

Closing JInternalFrame with Ctrl+F4 not using default close action

If you have a JInternalFrame and set the default close operation to HIDE, when you close the frame with Ctrl+F4, the frame is disposed instead of hidden. Anyone know if this is the way it is suppose to work, or is this a bug?

Assuming the above is correct:
public void keyPressed(KeyEvent e){
if( (e.isControlDown())&&(e.getKeyCode() == 115 ) )doDefaultCloseAction()); rykk

Specifying JRE version in webpage (not using default set in Plugin)

Similar Messages

Maybe you are looking for