Specs for content on ATV

Is there an ideal resolution for content on ATV. I've got a couple of options for resolution and bitrate. What should I make my home movies without making them too big?

AppleTV supports H.264 codec with a maximum resolution of 720p (1280x720) at 24fps, or MPEG-4 with a maximum resolution of 720x432 at 30fps. Audio sound support is either AAC, MP3, Apple Lossless, AIFF, or WAV. Up to 7.1 digital surround channels can be encoded.
For most of my older home movies, I have been using Anamorphic 850x480 (from standard-def DVD size of 720x480) with a bitrate of 2000kps (using open-source Handbrake to encode), with AAC+AC3 audio tracks, and they look almost as good as the original, but at about 1/3 the size. I don't have a HD Video camera, so I can't speak for HD sources - I'd probably keep it as close to 720p as I could though.

Similar Messages

Contents of functional specs for BW project

Hi
I would just like to know what kind of detail available on functional spec. Suppose you have to create a cube for storing sales data then what are the details you will be mentioning on the functional specification document.
Also what will you be mentioning on tech specs for this.
Please let me know its urgent.
Kind regards,
Nisha.

Hi Bwer,
I would like to know if at all the name of the data sources(BC or customer specific) to be used will be mentioned in the functional specs or will this be mentioned in the tech specs.
Also suppose we have to do some enhancements to the data souces then where will the details of the enhancements to be made will be mentioned.
Please advice.
Thanks in advance.
Kind regards,
Nisha.

Can I move content to ATV using drag and drop?

Sorry if this question was asked before. Please point me to it if it is, coz I couldn't find it.
The situation:
Here's what I am asking for. I have about 400GB of media and many real specific playlists used in the family.
Now I want to have about 20GB of that on ATV.
The problem:
The only way to move the 20GB as I see it right now is to sync the content by creating playlists. And my playlists DO NOT match the content I want to move.
For eg; I want to move all of ledzeppelin to ATV. Its outrageous that I have to create a playlist called LZ just to move it to ATV.
Is there any way I can drag/drop selected content to ATV just like I do on my IPOD? Am I doing something wrong?
Any other ideas?

Actually, I have an update. Finally yesterday night I spent 2 hours creating Artist playlists for ATV syncing. And I created a seperate folder to keep it away from our family playlists.
However, when I go to the syn window, it does not display a folder structure so all my playlists are mixed and sorted in ascending order!!!!!11 @#$@#$#$#$^ Geezzz!!
Come on apple! This is really dissapointing and I hope apple fixes this ASAP.

Need some technical specs for practice

Can any body send me some sample technical specs for practice. My email id is [email protected] Thanks in advance
bindazme

Hi,
I m not sending you any sample for tech specs but you will
find the tips as below:
1.In 1st page you may require to give heading and company logo also at the RHS.
2.Give title of the document , SAP Module Name, Specification Type (Giv ein a tabular format)
3.Revision History in Tabluar Format including Author , Description , Date , Version ( Version management very imp try to maintain it)
4.Requirement Description : Enter in detail wat is u r reqmt.
5.U may add Process flow diagram using visio etc.
6.Outstanding issues
7.Prerequisites
8.Input Parameter Details
9.Processign logic Details
10.Out Put Details (if Report Output Format)
11.The few unit testing scripts also u can include
12.Proper file name , in header & Footer
13. Always try to keep track changes on for version management. If u need to create new version try to accept previous version then keep track for curren tchanges.
14. Maintain index & Page no in table content .
Kindly Reward points if contents are useful....
Rewards,
Mandeep.

Can't find content in ATV and no more space

All my content on ATV has disappeared but there is only about 500mb of space left to download things. How do I get my stuff back or clear up space?

Welcome to the  Discussion Forums.
Are you sure you are looking in the right place for your content, ie in your library and not in a shared library.

Machine Specs for HCP Offerings

When selecting the size of the machine the only option available is amount of memory and disk space. There seems to be no option for processor speed and number of CPU's. Anyone knows how many cores is available and what is the processor speed?
Also when choosing the App Service is the Apps run on the same machine as the Database or on a different machine? If on a different machine what are the specs for the machine the app is run on?

Only work with 32bits
SAP NetWeaver 7.0 Java Trial Version System Requirements
      Operating System: Windows 2000 (Service Pack 3); Windows XP Professional (Service Pack 1) or Windows Server 2003
      NTFS-File systems
      Internet Explorer 5.5 or higher or Firefox 1.0 or higher
      At least 1 GB RAM, 2 GB are recommended
      Intel Pentium III/1.1 GHz or higher (or compatible)
      14GB free hard disk space (8.6 GB for the installed software and 4.9 GB for the installer software)
      High-resolution monitor (1024x768 or higher, 256 colors)
      Sun Microsystems J2SE SDK version 1.4.2_XX or 1.4.2_XX (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_XX/index.html. Please note that version 1.4.2_10 may cause installation problems.
      If you have already installed SAP products on your computer, you must ensure that none of the systems are called "J2E".
      The file C:\WINNT\system32\drivers\etc\services (Windows 2000) or C:\Windows\system32\drivers\etc\services (Windows XP) must not include an entry for the ports 3601, 3201 and 50000 to 50030. A possible entry can be excluded by using the hash symbol (#).
      If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. This is described in detail within the contents of the download package.
      To use SAP Interactive Forms by Adobe, you must install the necessary credential file and activatetial file and activate it using a unique password. Download the latest credential and password from SDN.
check the points if i help you

Spec for Swing

Is there a spec for Swing separate from the spec for the JDK? Is it publically available? Where can I find it?
If it is incorporated into the JDK spec, where is it? scattered throughout or in one place?
I've search this site and the JDK spec contents for many different keywords but cannot seem to locate it.
Thanks.

Yes, I'm well aware of the Swing APIs via javadocs plus there is the source code to look at. What I meant was something along the lines of the Java Language Spec. The APIs are fine as far as they go but many of them lack explanatory documentation - are little more than just a different format for stating the method signatures and class contents. Many of the APIs are great, however, giving what is expected, allowed/disallowed, intended behavior, potential trouble spots, interactions, side effects, and so on. Experimentation through trial-and-error is fine if time is not an issue. I'm looking for advanced info.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

Cross reference markers are deleted for content in text insets

Cross reference markers are deleted for content text insets. I currently have a chapter that is built from several Import by Reference files. I added an introductory paragraph with cross reference links to heading 2 titles in these text insets. Everything works and saves normally, although the cross reference markers disappear from the chapter when files are checked out a few days later. An extra Heading 2 is also added to the end of the document.
Steps to reproduce:
1. Create a chapter composed of several text insets.
2. Create a list of cross references to headings in these text insets at the beginning of the chapter.
3. Check in/check out the files from a source control product.
What went wrong?:
The cross reference markers are gone, resulting in broken cross references. An empty Heading 2 is also added to the end of the document following the final text inset
What should have happened?:
The markers should remain and the heading 2 tag should not be applied to the document.
Product version:
Product: FrameMaker
Version: 7.2
Platform information:Windows XP
Hardware: Dell Latitude D620
OS Version: Windows XP Professional Version 2002, Service Pack 3.
RAM: 1GB

Thanks for the information, Van. We did try several techniques including adding the insertion point immediately after the text inset before the normal paragraph tag, but none seemed to consistently work. I will investigate this scenario futher, though, in light of your comments.
We have managed to determine a workaround for this issue by avoiding a string of text insets. For some reason, using multiple text insets without separating them with normal text causes most of the problems after we add the files to our source control system. The situaton is not ideal, but it does work for the time being anyway.
Steve

Timeout for content

Hello
9iAS with Portal 9.0.2 in Sun Solaris
I am working with Oracle Reports Builder and Oracle Portal.
I've saved my reports with JSP extension.
So, I've made some portlets with these reports into PEOPLE_APP db provider.
Now, when I run my pages with these portlets, some times (most of times) the following error appears instead of the report:
Timeout for content=[any_number]
I've already researched in OTN and Metalink forums, I've changed my zone.properties and http.conf files, but it didn't resolve my problem.
So, what else I need to do in order to solve my problem? Any other ideas?
Thanks.
P.S: We've sent lots of questions with no satisfactory response from Oracle.
We've noticed that Oracle provided extremely poor support.
Maybe this isn't a good solution. Maybe there isn't a solution, at least in this way.
Take a look in some fragments of messages, found in OTN and Metalink forums:
"I've increased the timeout but that doesn't help.
It's also very strange that after rebooting the server in Portal 3.0.8/ias1.0.2.1 my pages appeared in 10-20 seconds and now in Portal 3.0.9/ias1.0.2.2 it takes two to four minutes. And this slow performance is only while retrieving the page for the first time. The second time I retrieve a page it's there in a few seconds.
So, I do not think it has anything to do with the provider's timeout...."
"But maybe it's the Portal-schema itself which causes this problem. I heard someone saying that he missed indexes after a Portal-upgrade --> maybe this is my problem too, although i didn't have any error-messages in the upgrade-logfiles...."
"Unfortunately we did not yet solve these timeout problems. Oracle is currently studying several logfiles and traces.
At first we thought that we had the timeout problems only after starting up the server. But now we noticed that the timeouts are repeated after 5 to 7 days. For some reason it looks as if Portal is refreshing the cache at that moment, but we can not find anywhere a refreshperiod of 120 hours or so..."
"Having wrestled with these Timeout errors for months with no satisfactory response from Oracle, I came across someone's solution yesterday and, for me, it worked immediately. Please keep in mind before doing this that it is in direct opposition to what the new "Troubleshooting Issues in Oracle9iAS Portal Architecture and Performance (3.0.9.8.2)" whitepaper states....."
"After many many performance problems and timeouts issues which Oracle provided extremely poor support we finally learned that all of our problems where related to the same things - Oracle has not tuned this product before shipping it. Numerous little bugs and coding errors were a small part of the fixes. The real problem is that all the indexes have subscriber id as the first column which is always set to one and is not used in the majority of querys which makes these indexes useless for performance... (http://metalink.oracle.com/metalink/plsql/ml2_gui.startup)"
"Sr. Oracle how long do I need to wait for real solutions? (http://metalink.oracle.com/metalink/plsql/ml2_gui.startup)"

You must have registered some provider for your portlets. Go to adminstration screens of portal. Goto edit provider from there and increase the portlet timeout.
Also change the time out value in your provider.xml for the corresponding JSPs.

Can someone help me with optimal specs for a 2012 R2 server migration from 2003 R2?

My specs for the Windows Server 2003 R2 which is our file server are:
Intel Core 2 CPU 6600 @ 2.40GHz (2 CPU's), ~2.4GHz Processor types are x86 Family 6 Model 15 Stepping 6 GenuineIntel ~2399 Mhz Physical Memory is 2 GB RAM Virtual Memory is 4 GB We have 6 fixed drives in place. They all range from 300 GB to 1 TB in total space.
We have two roles on the file server in place which are File Server and WINS Server. We have QuickBooks running on it and a bunch of random smaller applications as well.
When it comes to purchasing servers, we're open to either getting all the parts and building it from the ground up or a built machine. So my question is when getting Server 2012 R2, based on what I said, what hardware should I be getting? If you need more information,
please don't hesitate to ask.
Also, if you know where I could find quality documentation on the actual migration process for a file server between 2003 R2 and 2012 R2, please let me know.
Thank you for reading. ^_^

Hi,
Since Microsoft is ending support for Windows Server 2003 R2 mid-2015, there are a bunch of resources. To partially answer your question. I came across the following blog by Jose Barreto that might be able to help.
http://blogs.technet.com/b/josebda/archive/2014/11/05/migrating-file-server-from-windows-server-2003-to-windows-server-2012-r2.aspx
Thanks,
Jeff Thai
www.AvePoint.com
Please Mark Answered if my reply solves your problem. Thanks!

Carrier Type In DMS for content server

Dear All,
Can anyone help me in telling which carrier type i have to define in dc20 for Content server, if any required.
i have configured content server in Oac0,oact, csadmin, but while saving file on server (check in) it is giving me this error
Error while checking in and storing: Message no. 26253 .
Regards
Kashif

This error usually comes beacuse of improper settings maintained in CSADMIN for repository:
Do few changes in CSADMIN Settings for repository:
ContentStorage Host : (Enter name instead of IP)
ContentStorageName : WCC
Storage : ContentStorage.dll
Security : 1
ContRepDescription : (Enter descreption as given in OAC0)
driver : LiveCache or MaxDB (Whatever you are using)
Incase of DB, maintain also
SAPDMSUser :
SAPDBPassword :
Please check after making these changes and revert.
/Tilak

Timeout for content after installation

Hi all!
Running w2000, 9i DB and 9ias, I finally managed to install the portal. Took a while.
( used the step-by-step guide ). But now after the installation, I get the following errors when opening the /pls/portal30 homepage.
Portal Community Portlet Timed Out
Error: Timeout for content=15032
Error: Timeout for content=15032
Error: Timeout for content=15032
Error: Timeout for content=15482
Upon clicking the Login link, I get the following error:
You cannot login because there is no configuration information stored in the enabler configuration table. (WWC-41439)
I have tried to change the JServ settings to solve the timeout problem, but it doesn't help.
my current zone.properties settings are:
init.timeout=240000
servlet.page.initArgs=stall=60
servlet.page.initArgs=requesttime=240
Have anyone seen this before?
all help greatly appreciated.
JServ log output are appended below.
regards
Rune Engseth
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=34 Starting servlet, millis=1022588257108
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=34 Starting Retrieval of Meta-Data time=1022588257108
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=34 mTimeOut=10000000 for page
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=26 username is null
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=26 content-fetcher7 starting on page
[28/05/2002 14:17:37:199 CEST] page/DEBUG: active=26 Query String=_mode=3
[28/05/2002 14:17:54:504 CEST] page/DEBUG: active=34 After connecting to Page Meta, millis=17396
[28/05/2002 14:17:54:754 CEST] page/DEBUG: active=26 content-fetcher7 Finished working on page, size=null, millis=17555, id=null
[28/05/2002 14:17:54:754 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher7
[28/05/2002 14:17:54:754 CEST] page/DEBUG: active=34 Finishing servlet, millis=17646
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=34 Starting servlet, millis=1022588275005
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=34 Starting Retrieval of Meta-Data time=1022588275005
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=34 mTimeOut=10000000 for page
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=26 username is null
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=26 content-fetcher6 starting on page
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=26 Query String=_mode=3
[28/05/2002 14:17:55:095 CEST] page/DEBUG: active=26 Computed character set from response "x-oracle/portal-page; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:55:095 CEST] page/DEBUG: active=26 content-fetcher6 Before reading the data stream page, millis=90
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=26 content-fetcher6 xxx Characters=3522 page, millis=100
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 After connecting to Page Meta, millis=100
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 Processing data 3.0.8
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 Computed character set from response "x-oracle/portal-page; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 x-oracle-portal-expires header derives to: Wed, 29 May 2002 21:37:55 GMT
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 setting up cache output stream subID is 1
[28/05/2002 14:17:55:185 CEST] page/DEBUG: active=26 content-fetcher6 xxx Characters=5000 page, millis=180
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=26 content-fetcher6 xxx Characters=3924 page, millis=190
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 Starting a Page
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=26 content-fetcher6 Finished working on page, size=12446, millis=190, id=null
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher6
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 mTimeOut=15000 for 11
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 Adding portlet to queue 11
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 12
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 12
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 13
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 13
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 14
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 14
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 16
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 16
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 17
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 17
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 18
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 18
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=26 username is PUBLIC
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=26 content-fetcher5 starting on 11
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=26 Query String=_portlet_id=1&_provider_id=807692&_node_id=80769&_reference_path=11_FAVORITES_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=27 username is PUBLIC
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=27 content-fetcher4 starting on 12
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=27 Query String=_portlet_id=2&_provider_id=807696&_node_id=80769&_reference_path=12_COMPORTLET_TECHNEWS_807696&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=28 username is PUBLIC
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=28 content-fetcher3 starting on 13
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=28 Query String=_portlet_id=2&_provider_id=807692&_node_id=80769&_reference_path=13_RECENTOBJECTS_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=29 username is PUBLIC
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=29 content-fetcher2 starting on 14
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=29 Query String=_portlet_id=1&_provider_id=807693&_node_id=80769&_reference_path=14_FOREIGNAPPS_807693&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=30 username is PUBLIC
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=30 content-fetcher1 starting on 16
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=30 Query String=_portlet_id=16&_provider_id=807692&_node_id=80769&_reference_path=16_CREATE+PAGES_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=31 username is PUBLIC
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=31 content-fetcher0 starting on 17
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=31 Query String=_portlet_id=3&_provider_id=807697&_node_id=80769&_reference_path=17_CREATESITES_807697&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 content-fetcher24Closing cached HTTP connection, host/port changed
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 username is PUBLIC
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 content-fetcher24 starting on 18
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 Query String=_portlet_id=10&_provider_id=807692&_node_id=80769&_reference_path=18_CREATEOBJECTS_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 Computed character set from response "text/html; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 content-fetcher5 Before reading the data stream 11, millis=591
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 content-fetcher5 xxx Characters=1150 11, millis=591
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 content-fetcher5 Finished working on 11, size=1150, millis=591, id=null
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher5
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=34 Writing portlet to browser 11
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=34 Done Writing 11
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 Computed character set from response "text/html; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 content-fetcher24 Before reading the data stream 18, millis=3034
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 content-fetcher24 xxx Characters=2 18, millis=3034
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 content-fetcher24 Finished working on 18, size=2, millis=3034, id=null
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher24
[28/05/2002 14:18:10:247 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 Timeout occurred, label=13 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher3
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher3
[28/05/2002 14:18:10:247 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 Timeout occurred, label=12 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher4
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher4
[28/05/2002 14:18:10:257 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 Timeout occurred, label=16 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher1
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher1
[28/05/2002 14:18:10:257 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 Timeout occurred, label=14 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher2
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher2
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Writing portlet to browser 12
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Done Writing 12
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Writing portlet to browser 13
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Done Writing 13
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Writing portlet to browser 14
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Done Writing 14
[28/05/2002 14:18:10:267 CEST] page/DEBUG: active=34 Writing portlet to browser 16
[28/05/2002 14:18:10:267 CEST] page/DEBUG: active=34 Done Writing 16
[28/05/2002 14:18:10:707 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=26 Timeout occurred, label=17 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher0
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher0
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Writing portlet to browser 17
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Done Writing 17
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Writing portlet to browser 18
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Done Writing 18
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Finishing servlet, millis=15702

I've had the same problem. You can solve it by modifying the timeout-period for the provider. Surf to the portal-homepage- administration- edit provider.

Paper weight specs for HPLaserJet 100 color MFP M175nw

I have been trying (without success) to find the paper weight specs for my HP LaserJet 100 color MFP M175nw printer. Both the user manual and the online help only offer useless, non-specified info, such as : Use only heavy paper that is approved for use in laser printers and meets the weight specifications for this product. Tried to search for the paper weight specs for this product - no luck! I want to print on 200gsm (laser friendly paper), but don't want to damage my printer. PLEASE help?
This question was solved.
View Solution.

I will provide a link to a page that should be able to help out. Once you have the page pulled up click on the drop down titled “Paper-handling Specifications” then click on “Paper Tray Capacities”. That will open a chart that gives chart that list the paper, Paper weight, and the Capacity. I hope that this helps. Here is the link: http://goo.gl/xBtGF.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Choosing specs for a mac pro

Hello all,
I've posted this question a few times in the past and am still a bit unsure of what specs i should go with. With the student/teacher discount coming to an end soon, I thought I'd give it one more go. I am also curious how the new mac pro might affect my decision. I will not be needing a 12 core, but did this new product affect the specs for the lower models?
I am looking for a computer that will help me run my small business and keep my art portfolio organized. I'm willing to spend around $3000 and am also willing to use another source to buy less expensive parts to install myself.
My concerns are that it needs to run pretty smoothly with multiple programs open, no overheating, plenty of space for file storage and application support.
Ideally this computer will be my work horse for many years to come.
The programs that would most likely be open in conjunction with one another would be a combination of the following...mozilla, itunes, adobe bridge, dreamweaver, illustrator, and photoshop.
Specifically, i'll be using it for...
building a few websites
managing my small business
large photo file editing
keeping business files, artist receipts, etc
cataloging my art portfolio (large photo files)
storing photos, music, and short videos
graphic design
infrequent film editing
infrequent sound editing
The programs i'll be using:
CS5 (mostly photoshop, illustrator, bridge, dreamweaver)
iphoto
itunes
maybe minimal finalcut/soundtrack pro
maybe minimal aftereffects
I received this response the first time I posted this question and have found it to be very helpful, thanks bill! I'm wondering if anyone else would like to expand on it or perhaps offer other options for my situation. Thank you all very much, any advice is appreciated.
"My advice would be to buy the standard configuration 2.66GHz Quad Core (i.e. 3 x 1GB RAM, 640GB hard drive) from the Apple store, with the exception of the graphics card which you can buy as a CTO option for $200.00. It is well worth the upgrade from the GT120 - I know, because I upgraded myself last November after using a GT120 for 4 months.
With regard to the memory, if you can afford it now, buy 4 x 4GB from OWC now. If not, I would suggest that you buy 2 x 4GB now, and then add another 2 x 4GB in the future. 16GB of RAM is a much better option than 8GB for your requirements. You can sell the 3 x 1GB RAM to OWC in "part exchange", and there would be little difference in price for 2 x 4GB to the CTO option of 4 x 2GB.
http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
Instead of buying 2 x 1TB hard drives as a CTO option, you could purchase 2 x 1.5TB or 2 x 2TB HDDs for less money, and you would still have the 640GB. Spare drives are always useful. I use my original 640GB as a spare emergency system boot drive (OS and applications) in an external enclosure.
Another alternative is to wait a few more weeks, in case the rumours of the introduction of a new Mac Pro range in June have any foundation."

That advice looks pretty sound to me. What I would add is for internal drives you need one for storing your working files (better not to have those on your system drive but not really a big deal). And one for backup with Time Machine. What I also have is a separate external drive to clone my system so I have 2 backups.
And I have a partition on one of the internal drives that is used ONLY as a Photoshop scratch disk. This is by far the fastest solution unless you want to create a raid system. Never have your scratch disk on the same drive as your system drive, not even as a partition. You only need around 500 MB for this and it's best if that partition is dedicated only as a scratch disk.
You can create all of this with partitions for some of it, no need for lots of drives, except use different drives for Time Machine and your clone disk so both can't go out at the same time. I think for speed purposes that the scratch disk and Time Machine should be on internal drives, but Firewire 800 is pretty fast for an external.
Other than that your biggest concern is ram. Get as much as you can afford because that will determine your speed more than anything else.
I was working on a 4 year old iMac, which is a pretty good machine, but the limited 3 gb ram was causing problems because I have Photoshop, Illustrator and InDesign open all the time along with Mail, Chrome and a couple of others. When I got a Mac pro last year to replace it I got 8 gb of ram and the speed has been incredible.
Kevin
Edit: Forgot to mention that you shouldn't buy the hard drives or ram from Apple, they are way too expensive, get the minimum you can from Apple then get new stuff, OWC is a good source.
Message was edited by: Kevin Horn

Specs for content on ATV

Similar Messages

Maybe you are looking for