Specs on AC adapter for Vision M pla

Could someone who has a Vision M AC adapter please look at the fine print on the plug and tell me what the voltage/wattage is on it's?I have a wall AC adapter suitable for USB connectors and would like to know if it is compatible. The specs on it are Output: ?5.V / 20mA?ThanksDBW

Unless the adapter says input 120v/220v you will need to use a voltage converter or purchase a 220v adapter from Sony directly.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

Similar Messages

IPhone 4S dock connecter quiet while using USA SPEC PA15-INFI ipod adapter for car

Hello,
I recently installed the USA SPEC PA15-INFI Ipod connector for my 2004 infiniti g35. http://usaspec.com/userfiles/editor/file/pa15infi_20100120_webuse.pdf Essentially it plugs into my satelite radio harness in the trunk and acts as an adapter for an ipod/iphone so you can listen to them on the radio.
I personally have a 4S iphone and it works great. Great sound. Full functionality. However, I tried using my wife's 4S and the radio recognizes it but when you play music it's SUPER quiet. Almost mute. It's only on this phone. In addition to my phone, i tried an ipod and it works great as well. I callled USA SPEC and they didn't know the problem. They said this was a problem with my wife's phone specifically and had no suggestions.
I know my wifes 4S (the problem phone) dock connector works because I just confirmed it on 2 other devices. Full sound. No problems.
Fixes that I have tried:
Hard reset
Confirmed mono sound is off
Confired max volume limiter is off
reset all settings
Thanks ahead of time for all of your help!

I think I know the sound you're referring to, but I had no idea what caused it. I can't recall if it only happenned when charging in the car, but it's bloody irritating.

CREATIVE ZEN VISION M.. Adapter for the

Hello I wanted to know if they have teien thought to extract to the market an adapter for the car, this way like the ipod.

Krazyfalcon,
Mostly because our website doesn't have a "not yet in stock" setting. A product is either "in stock", "out of stock", or "backordered" with backordered meaning you can put a order in for shipment when stock comes available. Stock shouldn't be too long in coming and I know that I and the forum moderators are keeping an eye on it so that you all will know as early as possible when it comes in stock.
Jeremy

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

Preferred adapter for VGA? Mini DisplayPort to VGA or Mini-DVI to VGA?

Which is the preferred adapter for connecting a VGA-only LCD display to the new Mac mini?
The official Mac mini accessories page <http://www.apple.com/macmini/accessories.html> prominently features the Mini DisplayPort to VGA Adapter.
However, the Tech Specs knowledge base article <http://support.apple.com/kb/SP505> suggests the Mini-DVI to VGA Adapter.
I'm sure Mac OS X will work fine with either. But is one more likely to work better with Windows XP using Boot Camp?

I've come up with my own answer to my earlier question...
It's the Mini-DVI to VGA adapter.
I ended up trying both adapters, and got the results I described here: [http://discussions.apple.com/thread.jspa?messageID=9255959].
Besides the simple fact that the Mini-DVI to VGA adapter is the only adapter that fully worked for me, it's also cheaper.
Also, from a mechanical point of view, the nuts to secure a VGA cable to the DisplayPort version of the adapter are recessed into the end of the connector housing. This prevented my VGA cable from being able to be properly secured to the adapter--although this might be a defect with my cable!

Best Mini Display to DVI adapter for 2011 17" MBP w/no blocked ports!

I am looking to get a Mini Display to DVI adapter for my 2011 17" MBP.
+(Preferably it would even be one with a 6' cord.)+
It is not clear which one I should buy. Apple's (adapter only, no cord), is $30, while I can see others for far less on Amazon.
I have read that some of these adapters actually block the FW800 and USB ports on either side.
A blocked, or displaced FW800 port is a deal breaker.
1. Can someone with a 2011 17" MBP tell me that they have either one of these adapters, or the one with the cord, and that it doesn't block their FW800 port? (I'll pay the $30 (albeit grudgingly) if its the only one that works.)
2. This may be a dumb question, but the specs on these adapters say that they are capable of 1080p resolution. Would that mean they would work with a 1920x1200 monitor?

You might want to try the "MBP Display" discussion threads, might be able to find what you are looking for in there or get better support there.
I don't think I can help very much, but I have the Apple's adapter (no cord) and it doesn't block my usage of FW.

Issue with Third Party Adapter for custom JCA Connector in Oracle 11g.

Hi,
For a proof of concept, I have created my own JCA Connector. I have deployed this connector in Weblogic and it works as expected.
Now I am trying to call the JCA Connecter from the SOA Bus. For this I have create a SCA Composite with a simple Web Service to expose the composite, a Third Party Adaptor to wrap the JCA Connector and a Mediator to wire the Web Service and the Third Party Adapter together. For the Third Party Adapter I have created both the needed *.wsdl and _3P.jca file my self. The problem is that I could not find any documentation about the _3P.jca file, and it looks like it that this file is new for 11g.
After some puzzling and debugging I am able to deploy the SCA Composite with the Third Party Adapter. Though when I test the exposed Web Service with the Enterprise Manager I get errors and a stack trace. The problem is that the Record Converter I have created receives the default XMLRecord implementation (oracle.tip.adapter.fw.record.XMLRecordImpl) and not the implementation of the XMLRecord I have created my self.
So the question is does anybody know how to configure the Third Party Adapter so that it will use my custom implemenation of the XMLRecord interface (oracle.tip.adapter.api.record.XMLRecord) instead of the default implementation of the XMLRecord (oracle.tip.adapter.fw.record.XMLRecordImpl).
I would suspect that it should be configured in the _3P.jca file, though I don't know how. The following is the content of the current _3P.jca file I am using.
<adapter-config name="DiskAdapter" adapter="Disk Adapter" wsdlLocation="JCADiskConnector.wsdl"
                xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<record-converter className="com.osc.jcaadapter.convert.DiskRecordConverter"/>
<connection-factory location="jndi/diskcf" adapterRef=""/>
<endpoint-interaction operation="Send" portType="Send_ptt">
    <use-record-converter addonNamespace="http://somecomp.com/DiskAdapter"/>
    <interaction-spec className="com.osc.jcaadapter.impl.DiskInteractionSpecImpl">
      <property name="FunctionName" value="do-it"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>So I am hoping that some one knows how you should configure the Third Party Adapter so it uses my own implementation of the XMLRecord interface.

Hi Simeon,
That is a good suggestion, and I would certainly try to do that if I was not making a proof of concept. It would solve my problem of not getting the sub class of the XMLRecord.
Though for making my proof of concept I found a 10g example that used sub classes of the XMLRecord, and that is why I wanted to get the same example to work on 11g.
The alternative of passing a parameter through with InteractionSpecs, is an interesting though can not solve this problem. I don't have a problem with the javax.resource.cci.Record, I can determine the implementation of that in the conversion class it self.
The problem is the XMLRecord generated by the Oracle SOA Adapter Framework, some how I need a way to influence that to generate the correct implementation of the XMLRecord.
So your post is certainly helpfull if I was not trying to get this specific problem to work :).
But I am afraid that I will end up in implementing your sugestion.
Regards
Maikel.
Edited by: M. Dierdorp on 13-aug-2010 6:34

Need AC adapter for Satellite A30-614 / Part Number: PSA30E-1Q8EE

Hi,
I want to buy power adapter for this below given information model laptop. I couldnt find the adapter on website as this model is not in use anymore. I need a help, so where can i buy.
I dont even have the adapter information. Please let me know. If anyone know about this model please give me the information to [email protected]

This adapter is for the Sat A30.
*PARTNUMBER:* PA3290U-1ACA
*Specs:* AC Adapter 100-240V AC 50-60Hz 120W with 19V DC Output
I dont know from which country you are but you can find this AC-Adaptor on ebay. You can also buy this AC Adaptor at a Toshiba ASP.

Payload Streaming (for handling large payload) in Oracle JCA Adapter for AQ

Hi All-
Oracle Documentation indicates that it supports Payload Streaming in Oracle JCA Adapter for AQ. Link http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_aq.htm#CBAIAABF
However when I tried configuring an AQ Adapter in Jdeveloper, I was not able to see the check box for enabling Payload Streaming.
Do we have to manually update the .jca file to add the property "EnableStreaming" in the AQ Adapter Activation Spec? Is it supported and is it going to work?
What is the Message Size limit that the AQ Adapter can handle?
Please let me know.
Thanks,
Dibya

If the StreamPayload property does not exist, then the default value false is assumed.
<activation-spec className="oracle.tip.adapter.aq.inbound.AQDequeueActivationSpec">
<property name="QueueName" value="RAW_IN_QUEUE"/>
<property name="DatabaseSchema" value="SCOTT"/>
<property name="StreamPayload" value="true"/>
</activation-spec>
you can add <property name="StreamPayload" value="true"/>
to the .jca file but rememeber This property is applicable when processing Raw messages, XMLType messages, and ADT type messages for which a payload is specified though an ADT attribute.

Ac adapter for Linksys model # EZXS88W 10/100 8-Port workgroup Switch

Please, need help finding and obtaining an AC Adapter for Linksys model3 EZXS88W 10/100 8-Port Workgroup Switch. what info do I need to narrow my search, any websites? be blessed and keep looking up!
(\O/)
/_\ ANGEL!!
Jay Paul Wilder,RN _
Be Blessed and Keep Looking Up! (\O/)
*************************************** /_\ Angel*

Try to check on this link to check the power specs of the adapter.

Ac adapter for hp simplesave model MD2000h

lost or misplaced my ac adapter for hp simplesave model MD2000h. The external HD does not have any spec requirements written by the serial/model number. I don't remember how the ac adapter looks like either. Help?

Hi Silvana,
To find the right adapter there are a couple of ways we can do that. First, I found a link to the user guides for your external drive and from the User Manual I got support information. Their website is http://hpsupport.wdc.com and their toll free phone number is 1-866-444-7407. Try contacting them and they should be able to tell you the correct adapter.
Link to User Guides:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lang=en&lc=en&product=4023092&
You can use the actual product number which you should be able find on a sticker on the external hard drive or the box it came in. If you find that product number you can order the part from HP Parts Store and I have included a link below.
http://h20141.www2.hp.com/hpparts/
I believe that your best option would be to contact their support.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Adapter for Europe

Hi all, I have a Toshiba satellite laptop T115-S110. I am going to Germany in Sept and want to know if the adapter I have will work there. I looked at the accessory section and found an adapter that said it was good world-wide and it has almost the same specs as mine. Mine is PA3714U-1ACA. The input is the same at 120-240v, 1.5A, 50-60Hz but the output is slightly different. I have 19V and 3.42A. The one in the accessory list also has 19V but 3.95A. Will this make a difference? Can I use my current adapter or do I have to buy the new one. Also if I can use the adapter I have now , will it work w/o using a currency converter> I have the correct prongs to use so that is not a problem. Thanks for any help you can give me.
Solved!
Go to Solution.

satellite laptop T115-S110
Maybe this one?
Satellite T115-S1100
You won't need a converter - just an adapter for the plug, which looks like this.
-Jerry

Inqmy resource adapter for SAP with Bea Weblogic Server

          Hi everybody,
          Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
          It works well with INQMY server, but with BEA I'm getting a lot of problems creating
          the connections.
          Thanks in advance.
          Xavi.


All,
          Here are the steps we (used for internal testing) had to perform to get
          IN-Q-MY adapter for SAP to work with WebLogic:
          The wli.adapter.inqmy.sapr3.spi package contains extensions to the
          In-Q-My J2EE Connector Architecture classes to overcome some limitations
          in the base implementation classes. To get around these issues, we had
          to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
          R3ConnectionFactory classes.
          * The javax.resource.spi.ManagedConnectionFactory implementation
          does not over-ride the equals and hashCode methods correctly. This
          causes problems with WLS 6.1.
          * There is a bug in their javax.resource.spi.ConnectionManager
          implementation for non-managed uses of the adapter. Consequently, their
          adapter cannot be used in a non-managed scenario.
          * The javax.resource.cci.ConnectionFactory class does not support
          the getConnection() method that does not take any arguments (it throws a
          null pointer exception).
          I am attaching the classes discussed above.
          Cheers,
          Chris
          Torsten Friebe wrote:
          > Hi,
          >
          > does anybody know where to get a trail version - if one exists - of IN-Q-MY
          > application server or the resource adapter?
          >
          > Thanks, regards
          > Torsten
          >
          > "Xavi" <[email protected]> schrieb im Newsbeitrag
          > news:[email protected]...
          >
          >>Hi everybody,
          >>
          >>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
          >>
          > server
          >
          >>?
          >>
          >>It works well with INQMY server, but with BEA I'm getting a lot of
          >>
          > problems creating
          >
          >>the connections.
          >>
          >>Thanks in advance.
          >>Xavi.
          >>
          >>
          >
          >
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.cci.Connection;
          import javax.resource.cci.ConnectionSpec;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          import com.inqmy.r3adapter.R3ConnectionSpec;
          import com.inqmy.r3adapter.R3ManagedConnectionFactory;
          * Extends the In-Q-My implementation to allow for getConnection() with no
          * connection spec, i.e. use the default configured connection parameters.
          public class R3ConnectionFactory
          extends com.inqmy.r3adapter.R3ConnectionFactory
          implements com.bea.connector.IProxyMarker {
          private R3ConnectionSpec m_cspec;
          public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
          throws ResourceException {
          super(cm, mcf);
          String strClientNumber = mcf.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
          String strLanguage = mcf.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
          String strUserName = mcf.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
          String strPassword = mcf.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
          m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
          public Connection getConnection(ConnectionSpec connectionSpec)
          throws ResourceException {
          if (connectionSpec == null) connectionSpec = m_cspec;
          return super.getConnection(connectionSpec);
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          * Extends the In-Q-My implementation to over-ride the
          * allocateConnection method to return a CCI connection vs. a ManagedConnection
          public class R3DefaultConnectionManager
          implements ConnectionManager, Serializable {
          public R3DefaultConnectionManager() {}
          public Object
          allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
          throws ResourceException {
          ManagedConnection mc = mcf.createManagedConnection(null, cri);
          return mc.getConnection(null, cri);
          package wli.adapter.inqmy.sapr3.spi;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.security.auth.Subject;
          * Extends the In-Q-My implementation to get around some problems encountered
          * while running on WebLogic:
          * <ul>
          * <li>Must over-ride default implementation of equals and hashCode method</li>
          * <li>Needed to provide my version of the CCI ConnectionFactory</li>
          * <li>Needed to provide my version of the default ConnectionManager for the
          * non-managed scenario use case</li>
          * </ul>
          public class R3ManagedConnectionFactory
          extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
          private int m_iHashCode;
          transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
          public R3ManagedConnectionFactory() {
          super();
          java.rmi.server.UID uid = new java.rmi.server.UID();
          m_iHashCode = uid.hashCode();
          public Object createConnectionFactory() {
          // need to install our own default connection manager because In-Q-My
          // version causes a ClassCastException in CCI ConnectionFactory
          // getConnection
          return createConnectionFactory(new R3DefaultConnectionManager());
          public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
          throws javax.resource.ResourceException {
          // need to check for null on the ConnectionRequestInfo object because the
          // In-Q-My R3ManagedConnection ctor does not check for null
          if (cri == null) cri = getDefaultConnectionRequestInfo();
          return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
          public Object createConnectionFactory(ConnectionManager connectionManager) {
          // need to supply a connection factory that can deal with getConnection
          // that does not take a ConnectionSpec
          try {
          return new R3ConnectionFactory(connectionManager, this);
          } catch (javax.resource.ResourceException re) {
          re.printStackTrace();
          throw new java.lang.IllegalStateException(re.getMessage());
          com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
          throws javax.resource.spi.IllegalStateException {
          if (t_cri == null) {
          String strClientNumber = this.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
          String strLanguage = this.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
          String strUserName = this.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
          String strPassword = this.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
          t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
          return t_cri;
          public boolean equals(Object obj) {
          if (obj == null) return false;
          if (obj == this) return true;
          if (!this.getClass().isInstance(obj)) return false;
          R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
          return compare(getClientNumber(), mcf.getClientNumber()) &&
          compare(getLanguage(), mcf.getLanguage()) &&
          compare(getUserName(), mcf.getUserName()) &&
          compare(getPassword(), mcf.getPassword()) &&
          compare(getServerName(), mcf.getServerName()) &&
          compare(getSystemNumber(), mcf.getSystemNumber());
          protected final boolean compare(final Object obj1, final Object obj2) {
          if (obj1 == obj2) return true;
          if (obj1 != null) {
          return obj1.equals(obj2);
          } else {
          if (obj2 == null) {
          return true;
          } else {
          return false;
          public int hashCode() { return m_iHashCode; }

Network Adapter for G41-Z77A?

Hey, so one day my internet stopped working after my friend moved my computer, and judging from the fact that I can't find the network adapter in the hardware when looking at the system specs (that thing that usually says what drivers you have installed), I'm pretty sure I need to buy a new network adapter for my motherboard, and I was wondering which ones are compatible with my motherboard. I'm sorry if this was a stupid question, but I've only ever built a computer, not messed around with the individual parts. Yes, I have tried re installing windows, the drivers, and disconnecting the PSU from the motherboard already. Any help would be VERY appreciated.

Dear Qisab,
As I know, MSI has verified some Network cards. Please refer to its QVL.
http://www.msi.com/file/test_report/TR9_2625.pdf
Hope it is helpful for you.

Oracle JCA Adapter for JMS

Is there any tutorial which describes how to setup Oracle JCA Adapter for JMS in a clustered environment?

If the StreamPayload property does not exist, then the default value false is assumed.
<activation-spec className="oracle.tip.adapter.aq.inbound.AQDequeueActivationSpec">
<property name="QueueName" value="RAW_IN_QUEUE"/>
<property name="DatabaseSchema" value="SCOTT"/>
<property name="StreamPayload" value="true"/>
</activation-spec>
you can add <property name="StreamPayload" value="true"/>
to the .jca file but rememeber This property is applicable when processing Raw messages, XMLType messages, and ADT type messages for which a payload is specified though an ADT attribute.

Specs on AC adapter for Vision M pla

Similar Messages

Maybe you are looking for