Speculation about the next firmware (PR1.2) and it...

Can someone from nokia tell me when the next update is coming? At least an approximate release date? I have been uising the nokia n900 for almost 4 months now and yet nothing has been done about the ussd codes functinality. Its quite disappoiting, considering how expensive the phone is and yet nokia doesn't really care.

Sever wrote:
according to some rumours, pr1.2 is supposed to be released at the launch of the hong kong release of the device, which is sometime over the next two or three weeks.
list of fixes is here http://wiki.maemo.org/Maemo_5/PR1.2
see my post here /t5/Maemo-Devices/Hong-Kong-version-released-with-PR1-2-when-are-we-getting-it/td-p/677372
also, this blog is not going to give you the same feedback that you are tyrying to get. you may want to to to www dot maemo dot org to get better feedback.
all the nokia people that i talk to, know about this discussions site, but non of them read it.

Similar Messages

Info about the linux-firmware package and rt2780-usb-fw

Hello,
I have a have question about the linux-firmware package in the repo.
Recently there was an update for this package and when I checked its contents I saw that it also updates rt2870usb-fw.
Maybe I am a bit confused about the all kernel modules / firmware, but since I need to compile the latest kernel (linux-mainline from AUR) to get my buffalo wireless usb work(my rt2870 is supported from rc4), would it be possible to update only this package and use the kernel in the arch repo?
I can't test it myself because I am out of town for while.
Thank you

Hello,
I have a have question about the linux-firmware package in the repo.
Recently there was an update for this package and when I checked its contents I saw that it also updates rt2870usb-fw.
Maybe I am a bit confused about the all kernel modules / firmware, but since I need to compile the latest kernel (linux-mainline from AUR) to get my buffalo wireless usb work(my rt2870 is supported from rc4), would it be possible to update only this package and use the kernel in the arch repo?
I can't test it myself because I am out of town for while.
Thank you

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

The next firmware for N97

Nokia, I know you guys read this blog about the biggest disappointment in the History of Nokia (the N97). I want an exact release date of the next firmware and exact list of what is being done.. I cannot stand this RAM and C drive issues on this device.. I am using my n95-3 because N97 is not stable, not capable of multitasking, etc etc etc etc etc etc etc! I will soon trash it and record a video, or smash it on the wall.. The feeling of Smashing this phone on a wall well worths the 700$. Only reason I am not doing it because I am hoping The next firmware will give me at least 70mb free ram on boot and will clean up C drive from unwanted apps (adobe, jouki, boingo etc............. And therefore will give me at least 50mb free C!) P L E A S E list here nokia what is being worked on so i don't waste my time and totally switch back to my n95-3.

phatdumi wrote:
2bad wrote:
<quote>
The main problem for me is connectivity, I always have to re start the phone when I leave the house otherwise it will keep searching for my WLAN 20 miles away
</quote>
I wish people wouldn't blame the poor phone, when they don't read the manual properly. TURN OFF WLAN AUTO SCAN for goodness sake. Set the "default" access point in "WEB" to "Ask when needed", then choose whatever access point you want when you use the thing after you've left the house.
Jeez!
Message Edited by 2bad on 26-Jul-2009 05:22 PM
This is my interpratation of this problem.
(Connectivity>Destinations> Access Points) This is where you set up access to the internet and you prioritise your available connections i.e I have WLAN Priority1 and Orange Internet Priority 2 setup under an access point called INTERNET, I have therefore made this access point called INTERNET my default access point therefore I expect the phone to automatically connect to Orange Internet when my WLAN is out of range because Orange Internet is available everywhere I go. Isn't this what this feature is meant to be doing???????????????????????
Hey 2bad am I right or am I wrong?
Message Edited by phatdumi on 27-Jul-2009 04:04 PM
Hit Kudos if I Helped out.
Nokia 3310-> 8810->N95->N95 8Gb->
Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

The Next Firmware for E70 will come soon :)

i just want to know how everyone can predict
when The Next Firmware for E70 will come
as i know,
2.06 is LESS quality audio (i guess..)
rather than previous version (1.06)
i hope that will more improvement audio quality
in the next firmware for E70
let's say for firmware 3.x
any idea for firmware improvement issues ?...

*#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list.
*#7370# - Reformat your phone
This you perform as a last resort. Nothing else is working. Turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
re-flash - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

The next firmware for n73?

So who knows when the next firmware for n73 comes out? so I can update my phone? my current firmware is v4.0839.42.2.1.
Generally it takes 3 months to build a new version of firmware, and this one was build 27-09-2008 . so I hope that the new firmware comes very soon .
Thanks

*#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list.
*#7370# - Reformat your phone
This you perform as a last resort. Nothing else is working. Turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
re-flash - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Questions about the future directions of InfoPath and Microsoft Access

Because I have been confused about the future directions of InfoPath and Access, I wrote a short blog post, which I have pasted below. My question is, can Microsoft provide some more guidance on Access vs InfoPath? If Access is indeed the
the future direction, can you please provide some pointers to resources that can help us transition.
A Short Review of MS Access, SharePoint ,InfoPath (2013)
After the November 2012 SharePoint Conference in Las Vegas (#spc12) there were a number of blog posts and people saying that Access 2013 was great and would be replacing InfoPath.
Marc Anderson and
Ruven
Gotz have short posts summarizing #SPC12 and touch on the subject of InfoPath and Access. I also spoke with several individuals shortly after #SPC12 and they were excited about Access 2013.
Since I rely heavily on InfoPath for much of what I do, I wanted to kick the tires and see what everyone was talking about. First, a few notes about SharePoint 2013 and Office 2013.
Microsoft should rename Access: If you have tried to
bing the word Access, then you know that the search results are overwhelming, because the word "access" is used for so many other purposes.
Use the RTM version of Office 2013! I was performing my investigations by leveraging the Office 365 Beta and the Office Applications that come with it. Not much was working! After I uninstalled the Beta
version of Office 2013 and Installed the RTM version everything seemed to work.
Windows 7 and IE 9.0: The drag & drop that is being touted as
"manna from heaven" seems to work well with Firefox, Safari, Chrome, and IE 10, but it does
not work with IE 9!
Non Microsoft browsers are still second class citizens (except for the drag & drop): Microsoft has finally done away with the Active X's for datasheet view (that is brilliant!) One can now see the newly
minted datasheet view in many browsers. But I still find that one needs to be in IE to do a number of key manual opeartions. For example pasting numerous rows of data from a spreadsheet into the new sheet view works only in IE.
Access 2013
Microsoft Access is touted as a non developer tool. I know a number of people who are on the business side and love Access. These people will like the renewed energy that Microsoft has applied to Access. One should note that conceptually
this functionality existed in SharePoint 2010. Here is what I see that is new:
+The new version works better:Although I haven't tested it fully, it seems that many more features that work on the Desktop version of Access, now work in the published Web Application which is hosted by SharePoint 2013.
+The new version has fairly robust browser based forms: End users can now fill in data using forms that are rendered in the browser.
+The published version that resides in SharePoint now uses its own SQL server tables. So the engine appears to be SQL Server, not a modified version of Access built for a server. This stands to be quite robust, but I imagine
that some quirks will surface due to new model.
The limitations are:
- Access is pretty much its own application and does not integrate with SharePoint building blocks. For example, an Access table is not easy to integrate with a SharePoint workflow. Further, although Access forms now are visible
in a browser, they are not nearly as rich as InfoPath forms. InfoPath forms cannot easily integrate with the Access tables. In order to integrate SharePoint features and Access, one needs to tie SharePoint list(s) to Access as data sources.
This overcomplicates the model and one may very well run into synchronization issues.
In short, although I believe there will be some people who will be happy with newly minted Access, I do not think that Access will be able to replace InfoPath and Workflow technologies. I do agree that Microsoft does not seem to have put much energy into
InfoPath. If they leave a vacuum in this space, then others may very well take over, for instance Nintex Forms.

Although I agree with the comments made by Ruven and Marc after the conference please note that those blog posts are their own personal opinions and that they don't work for Microsoft. A lot of people have asked Microsoft to clarify the future of InfoPath
and the response up until now has been a deafening silence. In my opinion speculations about Access replacing InfoPath are premature.
I should also point out that most of your comments about Access 2013 above are actually about Access Services in SharePoint Server 2013. Access Services are NOT Access they are a shared service offering in SharePoint that convert and publish Access
databases and forms. As you point out once an Access database is published through Access services it is converted to SQL Server and no longer resides in Access. Of course I don't work for Microsoft either so these are all just my personal opinion.
Having said that I doubt you will get the confirmation/response that you are hoping for from any official Microsoft channel.
Paul Stork SharePoint Server
MVP Principal Solutions Architect: BlueChip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Has anyone heard anything about the next N86 FW?

It has been nearly 3 months since the last maintenance release, v21. The major update, v20 was released a long time ago. Since then, I haven't even heard of any rumour or info about the next FW update for the N86.
Has anybody here heard anything or knows anything?

Unfortunately Nokia's software update plans are well-kept secrets and aside from occasional leaks and some exceptional circumstances (e.g. letting people know that fixes are on the way after the recent E75 debacle) nobody outside of Nokia really knows what's going on. We can't discuss it on this forum anyway, what with it being a secret.
Help I'm trapped in a sig factory.

Apple pls look here: Some "quick wins" for the next firmware release

Hi!
First of all: Thank you, Apple, for Update 1.0.3! The most annoying bugs are fixed and the click wheel works better (but in my opinion the quick wheel of the iPod nano works still even better).
Please allow me to suggest a few "quick wins" you could easily (in my opinion) include in the next firmware release:
+ Please add an option to turn off that "screensaver" or to change the time until it turns on
The "screensaver" wouldn't be that bad when:
+ It would display "now playing" information in a large font (better readable than the normal "now playing" when the background light is off
+ The screensaver clock would display 24h format, when configured
Best regards, Jens

It's a waste of time posting this here because it's a user to user forum and no-one from Apple (except maybe the forum moderators) will see it.
Please use this link.
iPod Feedback.

The NEXT firmware update? 1.2.1

anyone know when Apple will release the next firmware update? got my phone for like a month now (i did 1.1.1) and all these safari crashes, bad password timer.. and like soo many bugs.
and yeah anyone know how to Empty trash in Mail? or you are just suppose to delete it twice? I did the option clear mail after one day but it never delete anything after like a week.. and yeah i guess that's a bug too.
so when's the Next fireware update?
1.2.1? 1.1.2? how does the number work?

hbueain wrote:
no, i don't use Mail on computer..
and.. i use Gmail.
just saying they should add a empty trash option, or at least make the "Delete after 1 day" work.
It does work. Deletion takes place based on 24 hours after the initial deletion was initiated by the user.
Go to:
Settings > Mail > (mail account name) > Advanced > Remove >
select either
(Never/After one day/After one week/After one month
Your mail will be deleted automatically based on the selection. No more having to delete an email twice.
Good Luck!

The next E73 our wishes and expectations

Hi, I invite you to exhibit wishes and expectations about the next model E73 ().
So hopefully will be taken into consideration our view as: Nokia customers.
So Lets help Nokia
1. Larger screen
2. More qualitatively material
3. Decent software
4.
5.

1. bigger screen,
2. coninue with excellent build quality of E71 (my phone now).
3. cradle so i can charge it while standing. in the cradle, offer a speaker box as well so i can listen to music more confortably.
4. double speaker so i can use the speakerbox for calls.
5. a phonbook back up that allows you to save all of the contact info, even when i edit the title of the contact above the name or number, ie,Telephone (work) changed to 0800-1630, I want this detail to remain if i have to back up and reinstall any phonebook data.
5. contact app that allows me to add any network contact to it, like gmail, or skype or yahoo. make a super duper messaging/contacts app that we can use, with video call capability over the sip/google, skype, yahoo, msn etc. so we only have to have one app for everything.
and many more things!
Nokia E65, E71-2 (30) [410.21.010 RM-357]

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

I would like to learn more about the API associated with contract and pric

Hi
I would like to learn more about the API associated with contract and pricing agreements in advanced pricing modules os Oracle 11i and also get functional knowledge.
Please note that, I have almost no knowledge about oracle oracle ERP system.
Please advice, where do I start.
thanks
siva

Please read Oracle Applications Developer's Guide .

About the Differences between MyServices Professional and MyServices Consumer

About the Differences between MyServices Professional and MyServices Consumer
MyServices Professional is different from MyServices Consumer in the following ways:
There are Common Tasks links on the home page for Order on Behalf and for Authorizations (if the Authorization portlet is enabled in the user's profile).
Automatically grants the Order on Behalf permission for all people in the Home OU of the MyServices Professional user.
Adds the "Authorizations for Others" view on the Authorizations page. This view allows the MyServices Professional user to view -- but not perform -- all Authorizations for people in their Home OU.
See the attached file for more detail and screenshots of: MyServices Consumer with and without the Order on Behalf link displayed, and Requisition and Authorization list views; MyServices Professional Home page with and without the Authorizations portlet visible, and Requisition and Authorization list views.
Note: RequestCenter 2006 cannot be configured to automatically add users to MyServices Professional on creation of their user record via directory integration. This can be accomplished in RC2007, since roles can be imported from LDAP in that version.

Hi Koji,
One thing to consider is the number of different source types. BO supports SAP and all the relational DBs. There is also the fact that BO provides a single front end to different reporting type which makes the user experience much better. Finally, users ability to build there own reports, without a high level of traiining is one of the big selling points for BO.
Here is a good overview of the combination of the 2 , including some roadmap
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10c3bca6-7dbc-2a10-7aa8-81d2731c7bb1
Hope this helps
Alan

Just curious about the "next" iPod

So are there any rumors of a "new" iPod being released any time soon? Just wondering what other features, other than a built in radio, they could possibly add? Anyone know of when the next release will be?

Just so you know, this is taken from the Terms of Use of this Discussion Forum:
Stay on topic. Apple's discussion forums are here to help people use Apple products and technologies more effectively. Unless otherwise noted, don't add Submissions about nontechnical topics, including:
That Apple rumor you saw on another website.
Discussions of Apple policies or procedures.
Speculations/rumors about unannounced products.
Apple is very strict about such threads being started. So please refrain from doing so in the future. Thanks.

Speculation about the next firmware (PR1.2) and it...

Similar Messages

Maybe you are looking for