Speed and Reverse
Hi, can someone please tell me if there is a way to slow down or speed up a clip, as well is it possible to reverse the direction of a clip. I was able to do it on an older version of imovie.
thanks.
Marty
The facility to slow down or speed up a clip is not available on iMovie 08, the only suggestion made on here is to use the previous version, namely iMovie 06.
I'm not sure about reversing the direction of the clip though haven't actually spotted any options in iMovie 08 to do so.
Similar Messages
-
Asymmetric NAT rules matched for forward and reverse flows - NAT Issue
Having a problem with a VPN site trying to communicate to a subnet off my ASA 5505. The network is simple, VPN IPSEC remote site is 192.168.6.0/24 and I can ping and access hosts on 192.168.10.0/24 (called InfraNet). I am now trying to allow communications between 192.168.6.0/24 (called FD_net) to 192.168.9.0/24 (called Inside)
The Error:
5 Nov 12 2012 13:52:50 192.168.9.19 Asymmetric NAT rules matched for forward and reverse flows; Connection for icmp src outside:192.168.6.11 dst inside:192.168.9.19 (type 8, code 0) denied due to NAT reverse path failure
I understand this is a NAT issue; but I not seeing the error and could use a second set of eyes. Here's my current running configuration.
: Saved
ASA Version 8.3(2)
hostname fw1
domain-name xxxxxxxx.xxx
enable password <removed>
passwd <removed>
names
interface Vlan1
description Town Internal Network
nameif inside
security-level 100
ip address 192.168.9.1 255.255.255.0
interface Vlan2
description Public Internet
nameif outside
security-level 0
ip address 173.xxx.xxx.xxx 255.255.255.248
interface Vlan3
description DMZ (CaTV)
nameif dmz
security-level 50
ip address 192.168.2.1 255.255.255.0
interface Vlan10
description Infrastructure Network
nameif InfraNet
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan13
description Guest Wireless
nameif Wireless-Guest
security-level 25
ip address 192.168.1.1 255.255.255.0
interface Vlan23
nameif StateNet
security-level 75
ip address 10.63.198.2 255.255.255.0
interface Vlan33
description Police Subnet
shutdown
nameif PDNet
security-level 90
ip address 192.168.0.1 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport trunk allowed vlan 1,5,10,13
switchport trunk native vlan 1
switchport mode trunk
speed 100
duplex full
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
switchport trunk allowed vlan 1,10,13
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/5
switchport access vlan 23
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport trunk allowed vlan 1
switchport trunk native vlan 1
switchport mode trunk
shutdown
banner exec Access Restricted to Personnel Only
banner login Access Restricted to Personnel Only
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns server-group DefaultDNS
domain-name xxxxxxx.xxx
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object service IMAPoverSSL
service tcp destination eq 993
description IMAP over SSL
object service POPoverSSL
service tcp destination eq 995
description POP3 over SSL
object service SMTPwTLS
service tcp destination eq 465
description SMTP with TLS
object network obj-192.168.9.20
host 192.168.9.20
object network obj-claggett-https
host 192.168.9.20
object network obj-claggett-imap4
host 192.168.9.20
object network obj-claggett-pop3
host 192.168.9.20
object network obj-claggett-smtp
host 192.168.9.20
object network obj-claggett-imapoverssl
host 192.168.9.20
object network obj-claggett-popoverssl
host 192.168.9.20
object network obj-claggett-smtpwTLS
host 192.168.9.20
object network obj-192.168.9.120
host 192.168.9.120
object network obj-192.168.9.119
host 192.168.9.119
object network obj-192.168.9.121
host 192.168.9.121
object network obj-wirelessnet
subnet 192.168.1.0 255.255.255.0
object network WirelessClients
subnet 192.168.1.0 255.255.255.0
object network obj-dmznetwork
subnet 192.168.2.0 255.255.255.0
object network FD_Firewall
host 74.94.142.229
object network FD_Net
subnet 192.168.6.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_24
subnet 192.168.10.0 255.255.255.0
object network obj-TownHallNet
subnet 192.168.9.0 255.255.255.0
object network obj_InfraNet
subnet 192.168.10.0 255.255.255.0
object-group service EmailServices
description Normal Email/Exchange Services
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq https
service-object tcp destination eq imap4
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_1
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq pop3
service-object tcp destination eq https
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_2
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq https
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group network obj_clerkpc
description Clerk's PCs
network-object object obj-192.168.9.119
network-object object obj-192.168.9.120
network-object object obj-192.168.9.121
object-group network TownHall_Nets
network-object 192.168.10.0 255.255.255.0
network-object object obj-TownHallNet
object-group network DM_INLINE_NETWORK_1
network-object 192.168.10.0 255.255.255.0
network-object 192.168.9.0 255.255.255.0
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any interface outside
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any host 192.168.9.20
access-list StateNet_access_in extended permit ip object-group obj_clerkpc any
access-list outside_2_cryptomap extended permit ip object-group DM_INLINE_NETWORK_1 object FD_Net
pager lines 24
logging enable
logging asdm debugging
logging mail errors
logging from-address hostmaster@xxxxxxxxx
logging recipient-address john@xxxxxxxxx level errors
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu Wireless-Guest 1500
mtu StateNet 1500
mtu InfraNet 1500
mtu PDNet 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-635.bin
no asdm history enable
arp timeout 14400
nat (InfraNet,outside) source static TownHall_Nets TownHall_Nets destination static FD_Net FD_Net
nat (inside,outside) source static TownHall_Nets TownHall_Nets destination static FD_Net FD_Net
object network obj_any
nat (inside,outside) static interface
object network obj-claggett-https
nat (inside,outside) static interface service tcp https https
object network obj-claggett-imap4
nat (inside,outside) static interface service tcp imap4 imap4
object network obj-claggett-pop3
nat (inside,outside) static interface service tcp pop3 pop3
object network obj-claggett-smtp
nat (inside,outside) static interface service tcp smtp smtp
object network obj-claggett-imapoverssl
nat (inside,outside) static interface service tcp 993 993
object network obj-claggett-popoverssl
nat (inside,outside) static interface service tcp 995 995
object network obj-claggett-smtpwTLS
nat (inside,outside) static interface service tcp 465 465
object network obj-192.168.9.120
nat (inside,StateNet) static 10.63.198.12
object network obj-192.168.9.119
nat (any,StateNet) static 10.63.198.10
object network obj-192.168.9.121
nat (any,StateNet) static 10.63.198.11
object network obj-wirelessnet
nat (Wireless-Guest,outside) static interface
object network obj-dmznetwork
nat (any,outside) static interface
object network obj_InfraNet
nat (InfraNet,outside) static interface
access-group outside_access_in in interface outside
access-group StateNet_access_in in interface StateNet
route outside 0.0.0.0 0.0.0.0 173.166.117.190 1
route StateNet 10.0.0.0 255.0.0.0 10.63.198.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable 5443
http 192.168.9.0 255.255.255.0 inside
http 74.xxx.xxx.xxx 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 173.xxx.xxx.xxx
crypto map outside_map 2 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.9.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.9.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 208.67.222.222 208.67.220.220
dhcpd lease 10800
dhcpd auto_config outside
dhcpd address 192.168.2.100-192.168.2.254 dmz
dhcpd dns 8.8.8.8 8.8.4.4 interface dmz
dhcpd enable dmz
dhcpd address 192.168.1.100-192.168.1.254 Wireless-Guest
dhcpd enable Wireless-Guest
threat-detection basic-threat
threat-detection statistics host number-of-rate 2
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 63.240.161.99 source outside prefer
ntp server 207.171.30.106 source outside prefer
ntp server 70.86.250.6 source outside prefer
webvpn
group-policy FDIPSECTunnel internal
group-policy FDIPSECTunnel attributes
vpn-idle-timeout none
vpn-tunnel-protocol IPSec l2tp-ipsec
username support password <removed> privilege 15
tunnel-group 173.xxx.xxx.xxx type ipsec-l2l
tunnel-group 173.xxx.xxx.xxx general-attributes
default-group-policy FDIPSECTunnel
tunnel-group 173.xxx.xxx.xxx ipsec-attributes
pre-shared-key *****
smtp-server 192.168.9.20
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:e4dc3cef0de15123f11439822880a2c7
: end
Any ideas would be appreciated.
JohnI don't see any inspection-commands in your config. Is there a reason for not using any of them?
If your problem is only with ICMP, then you should enable at least icmp-inspection. You can do that easiely with the legacy command " fixup protocol icmp"
Sent from Cisco Technical Support iPad App -
I have ordered a movie from Apple TV and found it would take 10 hours and 27 minutes to down load. How do I stop it, and reverse my order????
The problem is generally due to a slow internet connection.
AppleTV files are fixed size.
For SD you need 2.5Mbps, 720p HD 6 Mbps and 1080p 8 Mbps sustained speeds to view immediately.
If your internet delivers these speeds you should be able to play within seconds.
If slower AppleTV works out how long it will take do download the rental of say 3.5GB for a 720p movie, then subtracts the running time of the movie and whatever that figure is is how long it'll take to start.
So if a movie is 2 hours long and you have a fast connection and it calculates the movie could download in under 2 hours it'll play withing seconds.
If it thinks it'll take 4 hours to download, it'll subtract the running time of 2 hours and allow you to play in 2 hours time.
While this may not seem ideal the reason is that if it didn't precahce on a slow connection you would not be able to play a movie through without stopping and starting to cache the next section.
Unfortunately this is compounded by using the AppleTV for other things as this can reset the clock by flushing any of the rental cached.
AC -
Slo-mo, fit to fill and reverses
Hi
FCP is great until i try and reverse slo-mo or fit to fill a shot then I get terrible shudder on the shots, it was suggested that I try motion , I dont really know motion so how do I do that and is it better than FCP?
Tx in advanceI think, perhaps, you don't have the latest version of the software as there is a recent update that specifically addresses this issue.
I really think you need to read the manual about using Optical flow, as it's a process.
Further, you should get decent speed changes in FCP. What are your timeline specs? What speed changes are you looking to achieve?
Patrick -
Write a Labview program to control both speed and direction of stepper motors
Hello,
I am currently undertaking a project in University. As part of it I have to run two stepper motors at varying speeds, and one of them in forward/reverse. The motor I have for the project is a RS 191-8334 (V9728) and the controller is a RS 240-7920 (v10900). I have no experience of using Labview, and the version I have on my laptop is Labview 10. Any help would be greatly appreciated.
Ideally I would want a program to do both full/half steps, forward/reverse, have speed control and be able to control the number of steps.Hi Wef,
I would need to know more information about the devices in order to assist you.
What inputs does the stepper motor controller require and what hardware are you using to supply the required signals to the motor.
Best regards,
Stephen C
Applications Engineer -
At first the user created an accrual using FBS1 for reversal on 5/1/2015.
This created a clearing document.
Then it was mistakenly reversed by the user for 5/1/2015 by using F.81
This also created a clearing document.
Based on advice in the following thread: Delete reverse accrual/defferal documents | SCN ,
the user used FBRA to reset and reverse the document. We are unsure if the reset and reverse command was used or just the reset choice.
Now the accrual value is in the respective accounts with an open status (i.e. red button). Does this mean that the entry has already been discarded and it won't affect the accounts? Or does one then use FB50 to reverse the effects of the accrual in the current and next month?Hi
I guess that the user has not reverse the transaction as its still shows as open item in 30 /4 .. so I belive that you need to use fb50 or simply use FBR2 and enter the original entry no and the choose (generate reversal posting option )..
regards
mahmoud el nady -
Resetting and reversing a cleared document
Hello
I want to reset and reverse a customer clearing document. The clearing document which is 54203512 was posted and matched against the customer invoice in the previous period. When reversing and resetting the document in transaction code FBRA, a pop up screen u201CReversal Datau201D appears. The reversal reason is specified as 01 (Reversal for incorrect posting), posting date is todayu2019s date however the original clearing document 54203512 was posted in 05.09.2008 and in previous period. Click on continue.
The document is not reset and reversed and I am getting the error message u201CReversal reason 01 only permits posting date 05.09.2008u201D. Not sure why the document is looking at the posting date of original document even though I specified the reversal date as 08.10.2008. Can a document be reset and reversed in different periods?? Or does this cause any issues or problems? Or is this a bug??
Thanks in advance
EvelynHi,
There are only 2 controls allowed for Reversal reasons:
1. Negative posting
2. Alternative date for posting
The symptom you have mentioned would be of a control from somewhere else, i.e. either a user exit or a validation. An order reason can only restrict it to current date or allow any other date. At least that is what I have experienced.
Cheers... -
What is diff B/W dalta image and reverse image
What is diff B/W dalta image and reverse image
Edited by: Philip Eller on Jun 3, 2008 8:44 AM
Edited by: Philip Eller on Jun 17, 2008 9:18 AM*Please post your question to the BW forum.
-
Wifi speed and the new Apple TV concerns
One of the great things about my classic ATV is that I can start downloading a movie before dinner, and know that my viewing experience later won't be subject to variances in the wifi speed. In my experience, wifi speed and reliability can vary widely - and my worst nightmare is a video that stutters or freezes.
I new the new box has the faster modern chip, but I'm concerned Apple has no control over what might be the weak link: the wifi connection.
Is it time to make a run on a couple of classic boxes? Are they still in stock anywhere?The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895) -
Document or report for assessment and reversed assessment?
Hi guyz,
Is there any document or report for assessment and reversed assessment?
I need to find documentation as a proof for any execution and reversal of assessment, such as journal entry or report line items that is showing debit or credit for the expenses..
Currently, I can only see actual cost document which shows execution of assessment and an assessment cost element debit and credit in the Cost Center Actual/Plan/Variance report.
However, when I do reversal at KSU5, in the Cost Center A/P/V report is showing that assessment cost element is still exist (no more debit and credit showing as the result of the reversal), only that the value is now zero.
Need your answer asap...Thanking you..Dear Meila,
Use tcode KSB1 Cost Center Actual Line Itens, execute then report and change the Layout, insert the field Business Transaction in the report.
Regards -
Cannot clear document posted with FBS1 and Reversed with F.81 in F-03
We have recently turned on OIM for a Balance Sheet account and are in the process of clearing it. The postings in this account were generated with FBS1 (Accrual/Deferral Document) and reversed with F.81.
Majority of the documents displayed with FBL3N cleared no problem after open item management was turned on, however, there are a handful that are not displayed in F-03 (or F.13).
Please consider the following when answering:
OIM was turned on for the account using ZRFSEPA02 (Copy of the standard/not-delivered program for turning on OIM).
All of the entries were reversed with F.81 and the header of the documents does not contain a "Reversal Date".
I have already tried turning off OIM with ZRFSEPA03 and then turning it back on again with ZRFSEPA02.
My settings in FS00 are correct for the GL Account.
Hundreds of items were cleared. There are 7 documents that don't appear in F-03 or F.13
Also, please do not give me "Beginner level" information such as "Tick the OIM box for the GL Account in FS00" (You cannot turn on OIM in that manner for an account that has line items posted to it - I have been doing R/3 Configuration for 23 years, so I am an advanced Analyst in the FI/CO Area).
Thanks - Back to searching OSS!Hi,
Actually when report is executed we get following message
Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Hence, it is risky to execute this report.
Are you getting these documents in FB03 ?
Regards,
Tejas -
Questions and answers on DLM, sync speed and real ...
I was confused about some DML details and posted on a BE forum (https://avatar.bethere.co.uk/forum/viewtopic.php?t=43542) and got what was to me an incredibly helpful response from Tom (drsox). I thought it would be of interest to some readers here so copy it below. Once again, many thanks Tom.
1) FTTC DLM applies only between the cabinet and the modem?
>> Yes, as there isn't any broadband / data signal going anywhere further down the line to the exchange if you are on FTTC!
2) What are the different parameters that apply on this hop? I know there is a current sync speed, a current snr, a target snr and an ip profile. Anything else?
>> The IP profile isn't really related to DLM, it just "follows" your sync rate. In the past the IP profile would take up to 3 days to "follow upwards", leaving you with a high sync and awful speeds! This has been changed now on 21cn and "RE-ppp"ing (rebooting the router) would force the IP Profile to update instantly.
DLM changes the SNR target. So where BE have hard coded / set SNR targets such as 3db, 6db, 9db, 12db etc.. They only change upon user request. BT use their DLM system where line instability or line error counts are collected and analysed, the SNR target and interleaving settings are then modified in increments to try and stabilise the line.
This image shows quite well how, over a 6 day period, BTs DLM noticed that my line fault was fixed. I didn't get the full speed back for a week.
3) Is the ip profile the same as the BRAS profile?
>>Yes
4) The DLM keeps statistics of errors etc to dynamically change the ip profile?
>> Changes the SNR target and interleaving for the line which will reduce the speed, and therefor the IP profile.
5) There is a general theory that the DLM is incapable of telling the difference between an error and a modem power cycle, so that power cycling can cause your profile to lower. Is that correct?
>> Yes, if you resync / power cycle your router multiple times in a day it is likely to try and "combat the line errors" and reduce your sync rate by increasing the SNR and / or interleaving on the line.
6) Can other connections and disconnections have the same effect? For example, if I reboot the router (where this is separate from the modem)? Or use the router interface to disconnect/reconnect the broadband?
>> PPP drops (router reboots while leaving the BT Openreach VDSL modem on and connected) won't affect DLM. The IP profile will match your sync rate upon reconnection of the PPP session.
7) If you have a low ip profile, does this mean that the sync is limited to the ip profile?
>> Other way around, if you have a low sync rate then the IP profile will match the sync rate. If you get an awful sync rate and the IP profile follows downwards, then you resync higher but the router "keeps the PPP session open" (which is possible if you resync quick enough) then your IP profile will stay low, even though the sync is high. Until you reboot your router or disconnect and reconnect the PPP session.
8) Can the sync rate change dynamically without a reconnection? If the ip profile gradually rises, will the cabinet force a resync to make sure the customer is actually getting the benefit of the higher ip profile, or must the user intervene with a modem resync?
>> See above - Sync can rise without affecting the IP Profile and the cabinet does not force a RE-PPP.
8) As I understand it, if the ip profile gets stupidly low for some reason, it can only be reset by BT wholesale? This will only be done after a visit to your home and a telephone call from the engineer to the BT wholesale central admin?
>> Mixed reports plus I don't think people understand the difference between sync speeds, line faults, the delay in DLM increasing sync after a fault.. I expect half the reports on the BT forum are not related to a stuck BRAS / IP profile. It is possible for the ISP or a BT engineer to reset the IP profile and possibly DLM training.
9) (8) This applies to all ISPs using BT Wholesale: some may be more willing to force this process to happen on behalf of their customers, but none can cirumvent it?
>> GEA providers (I believe) still have DLM but don't have BRAS / IP profiles unless they implement their own.
10) Who sets the snr? As I understand it, the customer has no direct control. Is this different for different ISPs?
>> Mixed information again, I believe that BT Wholesale give providers DLM override controls and SNR settings but none? (or few) ISPs use this system.
11) Real download/upload speeds are physically limited by the sync rate. They are also naturally limited by local limitations (such as wireless connections), server limitations, and congestion at various points along the route? Any more? The congestion along the route will vary bewteen ISPs as they use different routes with different capabilitues.
>> It is possible for BTs regional or local cabinet network to become congested. Supposedly the minimum speed you should achieve over the BT part of the network is 15mbps. ISPs such as Plusnet, BT etc.. then layer their own "discriminatory" traffic management on top of that (ie, slow down torrents etc.).
12) Real speeds are 'unnaturally' limited by throttling. This will also vary from ISP to ISP. Sky claims to have none, and BT none except for p2p. PlusNet and John Lewis have significant (but well explained)throttling. All the more expensive operators have none.
>> What you said
13) The ip profile affects the sync rate, and therefore actual speeds. Does the ip profile effect actual speeds in any other way?
>> Not quite right. The IP profile directly affects the speeds you can achieve but the sync rate affects the IP profile. The sync rate is determined by the stability and quality of your line and what DLM thinks it can cope with.
14) Many people (including AndrueC above) report real speeds from speedtests that are consistent and not close to the ip profile. These can't be explained by congestion (that would make them inconsistent). They can't be explained by server limitations, as they are consistent accross servers and the same servers give better speeds to other people. They can't be explained by local limitations, too many people claim sudden drops where the local conditions have not changed. They should not be able to be explained by throttling, as they as seen for many ISPs who do not throttle (I don't hold with the ISP lying theory here). What other factors are there that can explain these cases?
>> AndrueC and some other Sky customers have strange symptoms where speeds are around 20mbps rather than the full sync speed. The only logical explanation is either local cabinet congestion, contention between BT and the provider's network (not enough investment by the provider) or artificial traffic management on the providers side. It is also possible that the router that the customer has attached to their line is unsuitable for the higher speeds. For example an old ethernet router may only be able to cope with 20 or 30mbps! A friend of mine has a TP-Link ethernet router running Tomato on a BT 80mbps service but the TP-Link's CPU limitation causes his service to only perform at around 68mbps; he has a replacement router on order. (Obviously wifi will significantly reduce performance).
15) If you get a stupidly low ip profile, how long can you except it to take before it climbs to something more reasonable? (eg in my particular case, my profile is currently around 15Mb, and from BT service line tests should be around 58Mb). And the classic question, is it best to power cycle the modem (1) never, (2) occasionally (how often) or (3) never if at all possible? Mine did jump from 3.5Mb to 15Mb on one power cycle. Was that just coincidence?
>> My FTTC line took about 6 to 7 days to go from 40mbps to 80mbps after a line fault. It is possible that your 3.5mbps to 15mbps increase was the "re-ppp" affecting the BRAS profile and that your sync had slowly been increasing over time.what a waste of money sending an engineer to "fix a fault" which does not exist. Precisely.
In my original BE post to which Tom so helpfully responded, I began: It seems to me that DLM is an excellent concept with a highly flawed implementation, both technically and administratively. I think that sending out an engineer to fix an obviously flawed profile is the main example of an adminastrative flaw. I understand (I can't remember source, maybe Tom again) that they are sometimes relaxing the requirement for a visit before reset.
Maybe the DLM system is too keen on stability vs speed. This will keep complaints down from many people: most users won't notice speed too much as long as it is reasonable, but will be upset if their Skype calls and browsing are being interrupted too often.
However, it does lead to complaints from people who notice the drops after an incidence (as in your thread that has drawn lots of interest), or who only get 50 instead of 60. The main technical flaw is that DLM can so easily be confused by drops from loss of power, too much modem recycling, etc, and then takes so long to recover. -
Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously
As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.
-
When I try and open Microsoft Word 2011 documents on my IMAC they start opening one after another at a rapid speed and I can't stop it. I reboot and same thing happens. The documents open in rapid succession on their own and don't stop until I force close or after maybe 100 or more open I start getting the following message for each document attemting to open "This document could not be registered. It will not be possible to create links from other documents to this document" and then in paretheses the name of the document. After I click okay another trys to open. Any suggestions?
If you had multiple documents open and quit the app without closing all of the docs first, it will open them again when you launch the app. Open Word, and then close all the documents, you may be asked to save the document, if the document was already saved but you made changes to it before you quit the app, you may need to save the changes first, shorcut ( command and s keys). After you close all of the documents then quit the app and restart the computer. See if this works.
-
Voiding and Reversing Cashed Checks
Check was received by the wrong vendor. The check was not made out to this vendor but was deposited and cleared by our bank. Later the vendor's bank informed them that the check would be debited to their account and returned to them. They are returning the check to us and our bank will credit our account. How do I void a cashed check and reverse the payment? Using transaction FBRA, I can reset the cleared check and it appears to be outstanding. The problem is that the check cannot be voided or the payment reversed after reseting the cleared check. Is there a way to void the check after the cashed check is reset? The only solution I have at this time is to post a manual entry to cash and to the vendor so that another payment can be made. This, I believe, will result in two payments being posted to this vendor for the same invoice.
HI ,
Under the following path
Bank - Environment - Check balance - we have lot of option for correcting the check related matter.
you can correct the and void the check number.
assign some points.
with regards
Krishna Singareddy
Maybe you are looking for
-
How do i apply a certain tween to several objects?
hi all, I'm working on a little flash project to show a card game being played out. Its just playing out a set of moves - no actual logic for actually playing the game. Anyhow, what i would like to be able to do is create a tween (hope thats the righ
-
Hello, I am trying to create a conditional data selection tool which contains the following parts: 1) Master drop down list 2) Detail drop down list (detail A = sites) 3) Another Detail drop down list (sub-detail B = contacts) 4) Linked data (linked
-
Hello, I need to launch F.13 transaction with parameters 'Company', 'Fiscal Year', 'Account G/L' a,d 'Document Number'. I have tried by 'CALL TRANSACTION'. I have to fill the select-options 'Document Number' with a lot of entries. I think that 10000
-
Need help on Self Hosting Using channel Factory
Hello, Need Help. I am trying to self host WCF service using cutom Channel Factory class. but I am getting exception. The scenario is something like below this : - I want to create the endpoint connection to WCF service. I want to achieve
-
Hi Friends, This is Regarding to improve knowledge in Context menus and custom control like to place image on screen please can anyone provide details material or steps to pass images Please dont say to refer previous threads i am tired of that T