Speed change in Travel Template

I want to use the travel template but the first 3 drop boxes move too quickly. I would like to slow them down. I have been able to slow down the background, but no luck with the drop box Zones

Kevan, thanks for responding. I did export the 12 second clip as a self contained file. I also exported it as an avi file just to see if that would make a difference. For the second questions, my drop zone from motion extends the entire 20 seconds for the original template file. I have checked that several times. And , lastely. I am dropping the clip into the correct drop zone. There is only one drop zone for video on the template that I created. The clip that I am trying to place inside the drop zone is a digital juice clip, so I went into the juicer and extended the clip inside of that program and exported it so that Final Cut would not read that the file was EVER shorter. That still didn't work which makes me believe that there is something wrong with the template. I am puzzled.

Similar Messages

I Can't change the background in the travel template

I'm creating someone a website and I decided that the travel template was the best look. When I go to the inspector, it says the background is a tinted image, which the default is, but when I change it, it shows what I changed it to in the insoector, but the page still shows the tinted image. Any ideas? Thanks a tonne

You nedd to go to the Page Tab of Inspector to do this & change the Page background.
My default for the Travel, Welcome Page is image Fill / Tile, not tinted image.
There are some tips on Inspector see here.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.5) Updated - Get Started with iWeb (WillG4PB.com)

IMovie Speed Change.. Again? I know :(

I've been looking some topics about speed change and to do that iMovie has to convert the clip thus this will severely kills the quality of the footage.
But one thing I don't understand is, my camera, NEX-3 records 29.97 fps but even then it needs to be converted. Why is this? As far as I understand, if your footage is in NTSC frame rate, it doesn't need to be converted?
I also did try to do color grading in Adobe After Effects and export it in 30fps in Apple Intermediate Codec, still, it needs to be converted by iMovie before I can alter the speed.
Anyone knows the workaround? Maybe what codec / frame rate that I need to convert it to, before importing it into iMovie? Thanks.

Show us a link, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"MelodyTS" <[email protected]> wrote in
message
news:eruq81$ajm$[email protected]..
>
> I have built a 16 page site with DW8 and based on a
template. I made sure
> I
> had all the navigation correct on the template Nav bar
before publishing
> the
> site. Of course the pop up menus work perfectly on my
computer, but all
> the pop
> up links are broken on the server.(can you hear
screaming into the
> night!?!)
> Somebody HELP me! How can I re-do the pop ups with out
having to totally
> re do
> the site? Do I fix it on my local view first then up
load to the server? I
> think the problem might be that the server keeps the
pages in a sub
> folder,
> like /htdocs/page.html, but I can't figgure out were to
change the link
> code to
> point to the pages on the server. ahhhhhhhhhhhh!
> Melody
>

Graduated Speed Changes In Final Cut 7

How might I make graduated speed change for a clip in Final Cut? What I mean by a graduated speed change is like how a car gradually brakes - well, hopefully I don't want these step downs, where the car would be traveling at 50 mph, then 30, and then 10. There should be a graduated progression of the speed change.
Thanks!

http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=69%2 6section=5%26tasks=true
http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=69%2 6section=2%26tasks=true

How to offset speed change in frame rate conforming?

Hi all. I am conforming video from about 25fps to 30 fps in cinema tools, before editing in FCP. Does any one know of a formula, or calculator tool that would tell me the speed change percentage to use, to get the clip to play in normal speed while editing? Is there a setting to do this automatically in FCP?

And you needn't speed change the footage at all. Simply cutting 25fps footage into a 30fps timeline will do. If you really desire a formula, to convert 25 fps to 30, you need to run it slower (less frames) so the speed is 25/30 or 5/6ths or 83% - to do it the other way, 30/25 = 6/5ths or 120%.
But, like I said, if you cut PAL footage into an NTSC timeline, it will adjust the speed appropriately - sizing too...
Patrick

Change the Appraisal Template in Mid of Year.

Hi All,
We want to edit the appraisal template which is being used in Production.
System is allowing to edit the template in development as there are no documents created. Once we transport the change to production what will be the implication.
Q1. Is it recommended to change the template after it is being used.
Q2. If really need to edit the template in mid of appraisal process how do we go forward.
Thanking you in advance.
Kamal R.
Edited by: Nalin Jain on Aug 5, 2009 7:41 AM

Hi Suresh,
We are on ECC 6.0 and SP 43.
We need to put some extra fields / Notes to the targets and extra sub statuses to correctly identify the condition.
But already appraisal process started and documents are created. Now we cannot either create the same documents in new template or postpone the appraisal template change to next year.
In this situation we decided to change the existing template. We want to know what will be the implications if we change the template in development and transport it to production???
Download and upload will create a new template which will not be useful for our case.
Thanking you in advance.
regards,
Kamal.

Upgrade and plug ins migration ? speed changes and transitions to motion 3

I have the FCS2 upgrade on its way soon i hope..
will my natress plug ins and others migrate when i go from FCS1 to 2?
I am mid project - have done all my captures but havent got into the nitty gritty of the edit yet - you reckon its a bit risky to upgrade?
I am super keen to get the ability to easily do ramps (in Motion 3 or in FC 6) and 3d logo fly arounds. Looking fwd to being able to throw transitions and speed changes into Motion 3 - i hear that it can deal with that now - is this true?

Thanks - thats all good

Adobe Media Encoder CS4 Causing Jerky Playback with Speed Changes

Here is an Matrox AVI that was captured in Adobe Premiere Pro CS4. Watching the edited clip with a speed change of 600% looked fine when played in Premiere Pro CS4.
When I export the clip using Adobe Media Encoder CS4 as MPEG2 Blu-ray with a preset of 1440 x 1080i High Quality playback is very jerky. An export of the same clip with normal speed looks great??
Any suggestions would be greatly appreciated
Thanks
Type: Matrox AVI
File Size: 119.9 MB
Image Size: 1440 x 1080
Pixel Depth: 24
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;00;36;27
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.3333
Codec Type: MPEG-2 IBP
Bit Depth: 8
Scan Mode: Interlaced - Upper Field First
Actual Image Size: 1440 x 1080
Here are the specs on my workstation
Case: Coolmaster-830
Op System: Vista Ultima 64 Bit
Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
Adobe Premiere Pro CS 4.0.1 update before installing RT.X2 Card and 4.0 tools
Performed updates on all Adobe Production Premium Products as of 03/09/2009
Matrox RTX2 4.0 Tools
Main Display: Dell 3007 30"
DVI Monitor: Dell 2408WFP 24"
MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
PS: Corsair|CMPSU-1000HX 1000W
CPU: INTEL Quad Core Q9650 3G
MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
Cache SATA 3.0Gb/s
2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB

Have you ever upgraded Adobe Premiere Pro in the middle of a project?
By the way I captured the same clip in Adobe software only mode using HDV as a capture settings. The editing mode is Adobe HDV 1080i, 29.97 frames. The results are also jerky. When I render the clip captured it is also very grainy??
Type: MPEG Movie
File Size: 196.4 MB
Image Size: 1440 x 1080
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.3333
Thanks for responding so quickly!

Slow motion and speed changes blurry jittery - SOLUTION!

I Have had a few issues with slo mo and sped up stuff going blurry or jittery on me.
This is from HD from a HC3 down converted (camera does this) to SD anamorphic (pal).
I think i have found the solution - and welcome any exra content from more experienced heads than mine.
Of course there are limitations to how far you can slo mo before you get the jitters - anyway- here is my hot tip!
Change your speed (fit to fill , or modify speed) of the clip in the canvas (leaners - watch your sound timing - it can be thrown off if you have locked off ausio tracks) open up your clip from the canvas by double cliking it, tap the motion tab, cross the motion blur box - adjust the sample setting from 4 to 32 (i dont know exactly what this does but this is the key!, drop motion blur down to 0 %.
RENDER! voila! This has quickly resulted in some speed changed clips that hold their form rather nicely (no blurring or strobing , jitters etc - that have plagued me in the past - i'm doing lots of sport stuff where speed changes are common)
Hope this helps other relative newbs out there! And if anyone would care to comment on why this works i would be all ears!

I know what you mean, I end up with an extra frame if I set an in and out point then insert/overwrite replace or superimpose.
I find the quickest work flow is to
0. mark the in point at start of clip
1. copy the clip, command c
2. go to the end of the sequence, end
3. paste clip
4. change speed, look at duration of clip, change speed %, command j
5. change duration back to original duration,
6. cut clip from end of time line,
7. return to in point and paste clip.
I find this does give me control over the clip, does not affect the timeline and is frame accurate.
I agree you should be able to change the clip speed without affecting the duration.
The alternative is as Andy described, fit to fill, here is an alternitive way of doing/describing this process;
adjust the out point of the clip to the new point you want,
move the clip out of the space on the timeline where you want the clip with the speed change to go,
place the CTI in the space where you want the new clip to go,
double click on the clip you want to adjust, opening it in the viewer,
drag the clip from the viewer to the canvas and the fit to fill option will appear along with all of the other options,
this will also do what you want, I believe there is no one click solution.
Someone please prove me wrong! I would love to be able to "command j" in to the speed dialog box, click on a check box that says keep duration or in/out points and simply change the duration.
Tony

Question on changing the report template to display the images

I am trying to change the report template so that each table cell will display an image and a checkbox for the image. The column templatet for the new report template is like this:
<td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t17data">
<table>
<tr height="90%"><td>
<img src= "&F101_GET_THUMB.#COLUMN_VALUE#" onmouseover="return onmouseover_img('#COLUMN_VALUE#');">
</td></tr>
<tr height="10%"><td align="center" valign="bottom">
<input type="checkbox" name="f01" value="#COLUMN_VALUE#"/>
</td></tr>
</table>
</td>
My questions are:
1. If the #COLUMN_VALUE# is null, the table cell will display a broken image icon and a checkbox. How could I avoid this? I could add condition to this template, such as when #COLUMN_VALUE# is not null, but how to refer to the value of #COLUMN_VALUE# in pl/sql?
2. I want to always put the checkbox at the center bottom, but no matter what I set "align='center' valign='bottom', it is always close to the image. Since the image sizes are different, the appearance of the checkbox are just up and down. How to fix this?
Thanks,
Fengting

hello,
at designtime the elements from the template are physically
imported into the report. the only way of re-applying a template
is to use the wizard, which will re-default the layout.
regards,
the oracle reports team --pw

Change a web template in Web Application Designer 3.X

Hi All,
I have a web template , when i execute it i get a chart format by default. But i want to change it to table format .Can you please let me know how to do it?.
I am not able to change the web template .
Thanks and Regards,
Sharath

Hello Sharath,
First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
hope it is clear,
assign points if useful.

Change all page templates in one go

Hi,
Is it possible to change all page templates in all applications in 1 go, we have 100s of applications and want to change the titile tag from <title>#TITLE#</title> to <title>#TITLE# - #APP_VERSION#</title>
Thanks in advance.
Graham

As i understand you need to change all Your aps by changing the templates ?
The fastest way is to change the actual sources of the templates if You've got permission to do that.
the table i witch the templates are is wwv_flow_templates
There will be need for clob utilities but it's possible
regards
piotr

Changes to multiple Templates

I know how to apply changes to child pages of "a" Template
after updating that Template. However, when I make changes to
multiple Templates of my site, is there a way to apply those
changes to child pages of all those (updated/modified) Templates at
once (using a single command or something) without having to work
on one Template at a time?
Here is a specific situation: We have nearly 50 Templates in
our Web site. We have to update a domain name of a link in all
these Templates. That is -- from "www.OLDname.com" to
"www.NEWname.com". It's easy to do a find and replace to make the
above change in all these Templates. (Note: I am referring to only
the changes in the NON-editable region of these Templates). Once
the above change is done, how do I apply those changes to all the
child pages of these Templates in a few easy steps ;-) Is opening
each Template and doing "Modify > Templates > Update
Pages..." the only way to achieve this?

Alan, thanks for the response.
I have one more question. When I run this command
"dw menu-->Modify-->Templates-->Update Pages", I
get lots of errors like the ones below. I had to press numerous
"OK" buttons to clear them away. Since they were so many, I usually
kill the process to get rid of them.
Error Message - Sample #1
Error accessing file "C:\sth\Templates\general.dwt:" file not
found (error code 2)
Error Message - Sample #2
There is an error at line 7 of
"C:\sth\sth\Templates\some.dwt": Unbalanced body tag.
Error Message - Sample #3
There is an error at line 218, column 8 (absolute position
28866) of "C:\sth\sth\sth.htm": Duplicate editable regions of name
"Document body".
I don't get this problem when I work on the Templates one by
one. Is there a way to suppress these errors, or at least cancel
the operation after this command has been issued ("dw
menu-->Modify-->Templates-->Update Pages").
Thanks again for your help.

Clean up speed changes in a zoom/track

Hi again,
I am just cleaning up some final issues on my edit and there is one tracking shot that has some slight speed change (bit jumpy) in it. I was wondering if I can smooth the speed with a filter or by using keyframe editor in motion?
I am pretty new to Motion, so please forgive me.
Many Thanks

Does it have to do with this?
https://discussions.apple.com/thread/3686148?tstart=0
If all you want to do is smooth out bad camera work, use the Smooth Behavior in Motion. Make sure you have Optical Flow selected.
Have fun
x

Speed changes with REVERSE don't transfer over to Motion on Round Trip

I don't even know if there is a solution to this problem. I have a clip in my FCP timeline that is playing at 80% speed and in REVERSE. When I highlight the clip then "SEND TO MOTION PROJECT," it opens in motion but plays the opposite end of the source footage. It is still playing 80% speed and in reverse, but it's looking at the other end of the footage.
In other words, if I had a 1-minute piece of source footage and 00:01-00:10 of that footage marked in FCP and sent to Motion, Motion is actually looking at 00:50-01:00.
Anybody ever had this happen? How do I fix it?

Even if I try to do the speed change natively in Motion, it still yields the same result in terms of what part of the source footage it's looking at.
In this case, if I wanted to do use the optical flow option, I would do it in Shake because the source footage is an hour long, and Motion has to analyze the ENTIRE source file rather than just the part that's being referenced. (Annoying) Shake does only the part you are using.

Speed change in Travel Template

Similar Messages

Maybe you are looking for