Speed change isn't blurry in the canvas but it is blurry when exported
I have a video using all HDV footage at 29.97 fps and I've slowed it down to 58% and I've taken off Frame Blending. I'm familiar with how this is supposed to look, and It looks fine when I play it in the timeline, but when I export it out as a Quicktime movie it is very blurry, considerably more than on the canvas playback. Also, there's an extreme color correction effect applied to all the footage as well and it becomes extremely muted when I export the footage.
Did you use CS5 or CS6 in the past? Did you set those apps to use offline help only so that you didn't have to watch Adobe Air update itself every time you tried to open Help? If so, there might be an old Adobe Help (CS5 / CS6) preference lingering on your machine. You wouldn't think CC would respect it, but you would be wrong. I had to install old Adobe Help (for CS5 / CS6) and change the pref.
I downloaded the outmoded Adobe Help app by way of: http://www.adobe.com/support/chc/?helpcfg=http://help.adobe.com/HelpCfg/en_US/Dreamweaver. helpcfg&url=http://helpx.adobe.com/en/dreamweaver/topics.html&product=dreamweaver
Similar Messages
-
I would like to change my back ground color in one frame for a logo that i am using I am able to change it on the canvas but not on the timeline?
Are you using FCPX? It doesn't have a canvas. Do you really mean one frame, like 1/30th of a second? Add a custom generator underneath the logo. Make it whatever color you want. Make it however short you want.
-
It doesn't seem to matter what project I'm working on... the picture in the viewer is gone. All I see is a blank (white) screen. If I put the cursor over the viewer and drag to the timeline, the clip will appear on the time line (and in the canvas) but I don't see it in the viewer. I usually edit my clips in the viewer and not on the canvas. Can anyone explain why this might be happening and how I might fix. I'm suspecting I must have messed up one of the settings but I'll be darned if I can figure out which one or how to fix. Please help!
David. Thank you very much. The problem was not with the canvas but rather the Viewer. But the solution was the same. Somehow, the Viewer window was re-set to Alpha. I changed it back to RGB.... and the picture is back. These issues are often very simple.... but they can drive you bats if you don't know the answer. Very grateful. Tim
-
How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
OS snow leopard and above...Do you have this problem with all websites, or only some? If only some, which ones?
-
I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
I've had to change my yahoo password on the computer, but now my stupid phone won't receive my mail. And it won't accept the NEW password that I know to be correct. Any advice? I hate this phone!
Let's bring the love back for your phone, clovercat.
I had the same problem when I had my Fascinate.
The best way to get the password changed and to receive emails is to delete http://vz.to/ZVexiW the email account and readd http://vz.to/15pw16c it to the phone.
This should get the emails flowing in for you.
Tamara H.
Follow us on Twitter @VZWSupport -
When converting word to PDF and reducing the size, the formatting changes how can i keep the format but reduce the size?
The original file is 32 MB:
15 MB is images
15 MB is Content stream
2 MB is everything else
After the PDF/A-1B save as:
The file is 182 MB
Almost 100% is Images
It is an architecture portfolio with many complex images. Is there a setting when I change to PDF/A that can limit the growth of the image files? -
I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!
Hi Joe,
Thanks for your quick response. I should add....it worked before. When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac. Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed. I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD. SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously. I do not remember changing any settings since then.
When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc. The problem is my DVD is all miscellaneious files/documents. I just want to be able to see them in the finder. I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents. Again, I was able to open them previously and the DVD is not corrupted in any way.
Any additional advice?
Thank you! -
"The process cannot access the file ..." occurs when export crystal report
We are using a web application developed in VS 2005, .NET 2.0 with the bundled Crystal Reports version 10.2.3600.0 running on a Windows 2003 Standard server with 4GB Ram and Dual CPU's. Periodically we are still receiving the following error in our production environment:
InnerException:
The process cannot access the file because it is being used by another process.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
This is occuring at the point on the code where the report is being exported to a PDF. Exporting the report to Excel does not appear to cause the error.
Stream outStream = report.ExportToStream(ExportFormatType.PortableDocFormat);
byte[] charStream = new byte[outStream.Length];
outStream.Read(charStream, 0, (int)outStream.Length);
if ((charStream != null) && (charStream.Length > 0))
HttpContext.Current.Response.ContentType = "application/pdf";
HttpContext.Current.Response.OutputStream.Write(charStream, 0, charStream.Length);
HttpContext.Current.Response.End();
report.Close();
report.Dispose();
ds.Dispose();
GC.Collect();
Closing and disposing of the report and dataset (xsd) are followed by a call for garbage collection. We are unable to produce the error in our development environmennt and have not at this point been unable to pinpoint a problematic report. The development team members do have SP1 installed. The report limit has not been changed from the standard of 75 jobs. Reviewed the following document, Re: "The process cannot access the file ..." occurs when export crystal report However this applies to VS 2008. Any suggestions to resolve the issue would be greatly appreciated.
Thanks,
JoeGood morning Joe
For more details re. loading please see the following resources:
[Crystal Reports 2008 Component Engine Scalability|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412?quicklink=index&overridelayout=true]
[How Can I Optimize Scalability?|http://msdn.microsoft.com/en-us/library/ms225519.aspx]
[Choosing the Right Business Objects SDK for Your Needs|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7]
To answer your questions:
Is it correct to presume that the physical number of CPU's is not factored into the CPL? So that a Server with 2 or more processors does not increase the 3 concurrent requests? Therefore 2 CPU's would not increase the CPL limit to 6 processes?
- Server with 2 or more processors does not increase the 3 concurrent requests.
What would be an alternate solution to this limit be, considering the report requests could increase significantly?
- Only way around this would be to web farm the solution
If only only 3 reports can be processed at the same time. If one or more of the reports currently processing is taking longer due to receiving large amounts of data, how does that affect the queue? And what is stored in the queue, data and/or the report? Is this something that could consume memory?
- The report can take as much time as it needs. The result is that one license will not be released until the report is done. There is no data stored, just a pointer to the report. However queued apps will chew up memory, some times to the point of the server becoming unresponsive
I have read in the documentation on this site, that the dataset sent to the engine is copied in memory during report construction. So if a large amount of data is requested for a report (as an example 10+ MB) Could enough users requesting reports drive the memory up because memory usage doubled due to the dataset?
- Absolutely. See [Crystal Reports Guide to ADO.NET|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20].
Understanding the the CR DLL's are loaded on the first report request, do they get released at some point time due to inactivity or garbage collection? How much memory usage could be consumed when they load and stay resident?
- No they do not. Not as long as the application is running.
Ludek -
Is there a way to control the quality of my pdf file when exporting from a .pse file?
Is there a way to control the quality of my pdf file when exporting from a .pse file?
Hi,
I have 2 pages in all in a .PSE file.
When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
Please advise how I can export the file so that i can have better quality.Rik Ramsay wrote:
To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time. -
In IPhoto 11 I have made an album and rearrange the photosin the order I require them. When export the album to allow me to burn them todisk to be viewed in Windows they do not maintain the same order. What am I doingwrong?
When you sort the Album in iphoto are you sorting manually? Or by date of the photos?
When you sort in the Finder how are are you sorting?
Here's one way to do what you're trying to do:
Create your Album and sort the pics as you want them. Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the Finder and you end up with a folder full of images in the same order as the Album in iPhoto.
Regards
TD -
I am trying to upload my itunes music from my ipod to my itunes on my computer. My itunes music lists all of the music, but cannot find it when I try to load it to my phone.
The songs are on my ipod, but not on my phone and I don't know how to get them from one device to the other.In your case, it would be better to have transferred the library to an external drive from the PC. Then, connect it to the iMac and put the library onto the Music folder.
You used Migration Assistant, and it creates a new user with the transferred data.
Open > Log Out, and log in the new user. Then, open a Finder window, choose Music in the sidebar and you will see the iTunes library. Now, you have to move the iTunes library to /Users/Shared (select Go menu -in the menu bar- > Go to Folder, type that and copy the iTunes library to it). Finally, log in the other user, go to the same folder and move the library to the Music folder.
After doing that, open System Preferences > Users and Groups, choose the user created by Migration Assistant and press the - button to remove it. This is easier if you have an external drive -
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
I want to click to open the message but it is opening when I select it, and I can't get rid of the open Pane below the messages.
Excellent. Thank you very much...
-
Where can I give feedback regarding Aperture?
I'd love to see the ability to removes EXIF data when exporting, especially to social networks.Robert,
For any normal Export, simply cilick the list of option and further click on Edit. There deselect to include Metadata, and there will be no EXIF data exported. But no copyright info either.
The option already exists to do what you want. Once a normal Export has deselected that, I believe even exports via plugin for say FB will not have it either. I tested with an export to SmugMug after deselecting in an earlier ordinary export, and EXIF info was not transmitted.
Ernie
Maybe you are looking for
-
For some reason, when I am importing .mov videos (VERY low quality), the screen is just white and it only plays the audio. Can someone help? Thanks.
-
CProjects 4.0: BAdI: DPR_EVENTS
Hi all, I am using the BAdI DPR_EVENTS with the filter ON_IF_DPR_COMMON_CHANGED. In the ON_EVENT method, I am checking the object type of the sender using METHOD ir_sender->get_object_type and if object type is TTO (task), I am using METHOD ir_sender
-
Pkg-config doesn't find libmfx
Hi, I'm trying to build ffmpeg with h264_qsv (QuickSync) support. In order to do that, I need libmfx. But pkg-config doesn't find the libmfx files, although they are present: PKG_CONFIG_PATH is filled with the correct path: [root@nuc FFmpeg]# echo $P
-
How do I get the 'Toshiba HDTB 11 0EK3BA'
Hello I've just bought a macbook and would like to connect my Toshiba HDTB 11 0EK3BA external, that I used to have with the dell laptop before. The macbook doesn't recognize the Toshiba, any suggestions what I could do? I'm quite new with the apple p
-
Hi All I'm trying to modulate PWM timer (working on 1MHz) with sinusoidal signal at 50 Hz on Blackfin 537. the VI working done, but i'm cannot control the frequency on modulating signal, however it's look like the FOR loop proccesing time is 1.7msec.