Speed change messing up clip when sending to Motion from FCP

Im trying to send a clip to Motion from Final Cut Pro. In final Cut Pro I had part of the clip at regular speed and the other part of the clip I had at 75% speed. When it gets sent to Motion, the clip the is supposed to be the 75% speed one is a different clip. How do I get the clip to get sent to Motion and also have the 75% speed effect on it when it gets sent to Motion? Or, can I slow it down in Motion? Thanks!

You can just send your clip to Motion then make the speed change in Motion, that is the common workflow.
FCS 3 now fixes this issue when sending a speed clip from FCP to Motion, so with FCP 7 / Motion 4, sending your 75% clip to Motion will retain that speed change in Motion.

Similar Messages

  • When sending to Color from FCP, my video is mostly black, with some green highlights.

    I have a sequence of ProRes 422 (LT) and I'm trying to send to Color from FCP, however, when the project opens, the video shows up as mostly black, with most highlights green, blue and red -- but 90% of the frame is completely black.  The weirdest part is, in the Color timeline, I can see the thumbnail for the video and it looks just fine.
    Currently, I have a 2010 Mac Mini with 4gb of RAM and it's hooked up to my monitor through the HDMI port.  Any help would be greatly appreciated.
    Thanks!

    I just got the 2010 Mac Mini -- but my previous Mini was the early 2009 model with only 2gb of RAM and Color ran just fine.  Any help/suggestions?

  • Changing the font size when sending email out from the iPad with MobileMe

    Is there a way from the iPad, or from my MacBook to the iPad, that I can increase the size of the font when typing outgoing mail? I use MobileMe on both my iPad and MacBook. My sister has cataracts and she needs the type size larger than what is already set on the iPad outgoing mail. I can make the type size larger for my incoming mail - I guess I did it through iPad settings -but I can't seem to figure out how to make it larger for my outgoing mail. I would prefer to be able to answer her on my iPad than having to switch back to my Mac each time she writes. Thank you.

    I guess what I am looking for is a toolbar when I am sending email so that I can change the font size, change the typeface, make words bold, underline them
    I don't think you will find any app that does that, it's the kind of feature only Apple can add. You can tell them here:
    http://www.apple.com/feedback/ipad.html

  • Is there a way to add Handles to clips when "send to (and from) color"

    Hi all. Here is the reason i want handles.
    After you finish your (draft) project you grade it in color, then the client comes in and approve it or makes some changes. But then i have no handles to play with if there are any changes.
    thanks
    Andre

    I actually did read the entire color manual 2 months ago and have done 2 projects on it so far. But obviously i didn't remember every little thing.
    The setup room you revered to is actually the room where you browse your files on your MAC etc. But i understand why you said that because you have to be in the setup room to be able to go to the project settings room. Thanks for your help Zebulun. I did go to page 102 and it solved my problem. The reason i couldn't find the "handles" setting is because its (for some weird reason) under the broadcast safe tab. And i didn't bother looking there.
    Thanks again
    Cheers

  • How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_1.png and I would like to put in something more relevant than just shapeimage?

    How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_2.png and I would like to put in something more relevant than just shapeimage_2?

    When you drag images from iPhoto to iWeb, iWeb retains the original filename.
    When you use a mask, iWeb creates a png file with the shapeimage name.
    So do not use a mask and crop your images before dropping them on the iWeb canvas.
    When you use an irregularly shaped mask, then png files are created. They have to be png because of the transparency of the shape.
    You can use a 3rd party application to create the png images yourself, and give them a proper name.
    Or use the published png files, rename them and drop them back onto the iWeb canvas, while first removing the previous images.

  • How do I change my email address when sending a PDF file:

    How do I change my email address (correct it) when sending a PDF file?

    You'll need to add the email address you want to use to Reader... If you're not prompted to do so when clicking the Submit button, you can do it via Edit - Preferences - Email Accounts.

  • Files corrupting when sending email attachments from Mail & Thunderbird

    Hi All
    I'm hoping that someone will be able to help here as this problem is driving me crazy!
    Most if not all of my email attachments are corrupting when sending from Apple Mail and Thunderbird.  I'm also having issues with publishing files via FTP from Rapidweaver 5!  I have spoken to BT about the issue but they have tested the line and say everything is OK.
    The strange thing is, it's happening on my MacBook Pro (Mountain Lion) and my Mac Pro (Lion). The problem's also happen when I'm using a friends high speed internet connection so that only leaves the server. I'm really out of my depth with the server side of things though. I did have a reply from Servage (my hosting company) who said I may have been the subject of a hack and an upload script!! Not sure what this means or how to check if this is the case. One question though, would this corrupt email attachments as well as uploading to the server?
    Many thanks
    Mark

    Further to the above:  I have now found that the same corruption happens when I email attachments and FTP from my PC laptop, so this rules out a computer issue.  I have also swapped wireless routers and exactly the same problem.  As mentioned above, I don't get the corruption when using another internet connection.
    Also, I have an iPhone which I've restored to factory default settings and when I take a photo with the phone and email it (using my home wireless network), the file corrupts, everytime.
    Using services such as YouSendIt and WeTransfer, gives the same problems!
    I'm desperate for help on this one and I'd even pay someone to resolve it!

  • Photoshop Error When Sending for Edit from Bridge or Lighroom

    When I attempt to send an image from Bridge CS5 or Lightroom using the Edit In or Open With commands Photoshop begins to launch but then displays the error message "Adobe Photoshop CS5 has encountered a problem and needs to close." If Photoshop is open and I attempt to open Bridge I get the same error message for Bridge.

    Thanks theFurryOne for your response.
    I do see my source in the data_source view.
    As for the Caused by:
    I see:
    Caused by:java.lang.NullPointerException
    at oracle.dbtools.raptor.navigator.net.DBURLStreamHandlerFactory.fetchSource(DBURLStreamHandlerFactory.java.213)
    ...............................................DBURLfileSystemHelper...
    at oracle.ide.net.URLFileSystem.createReader(URLFileSystem.java:1630)
    at oracle.ide.model.TextNode.createreader(TextNode.java:1680)
    .....................................loadTextBuffer...
    .....................................openImpl....
    ...48 more (these do not appear in the details window due to the number of exceptions prior to the caused by line)
    SQL Developer version
    .....About tab
    Version 2.1.1.64
    Build Main-64.45
    .....Version tab
    Java Platform 1.6.0_11
    Oracle IDE 2.1.1.64.45
    Versioning Support 2.1.1.64.45
    Edited by: amosgreg on Sep 2, 2010 4:58 AM

  • Why is the send button grayed when sending a message from contacts on my I pad

    Why is the send button grayed out when trying to send a message from contacts using my I pad

    Stick with one post at a time. Otherwise, it gets very confusing.
    https://discussions.apple.com/message/18529200#18529200

  • Mail displays a code when sending a picture from Photobooth. Any ideas ?

    Hello everyone,
    I have a problem since I bought my MacBook pro (Os X Lion 10.7.5) :
    When I am sending a picture from Photobooth by clicking on the "email" icon, the receipient of the mail can't see the picture but just a code.
    (For example : "ª◊} ÿåäa≈”Q®K ! ÜË.0T˛≠")
    Any suggestions ?
    Thank you very much for your answer.
    Antoine.

    Anyone has had this problem yet ?

  • Wrong senders name when sending an email from my ipad mini

    When I send an email from my ipad mini the recipient gets my email but is says it is from someone with a different surname to me.  How can I change

    Go into Settings>Mail, Contacts>Calendar>the email account in question and check all the settings. The name the receiver gets is set up in your account.

  • Color crashes when starting from "send to Color" from FCP.

    Hi. I am a film student and am using Final Cut Studio to edit a short film.
    It's been recorded in PAL Anamorphic. I edited it in FCP, and when I select the sequence and send it to Color, Color opens, and crashes while "Importing Final Cut Pro XML".
    Color seems to load fine if I open it by myself, but when it imports the sequence from FCP it crashes.
    If I try to do it again, it even asks if I want to overwrite the project. I accept and it crashes again.
    I can launch Color and open the project file, but it has no video inside.
    I don't know why this can be happening. I could use Color before (8min projects), and I could even use it today (30sec project), but the video didn't load completely (3 shots, only the one in the middle showing, the others had a cross over them). I sent a larger file, to see if the problem wasn't with the "starting" and "ending" shots, but it crashed.
    I don't have any saved Color project to try. What should I do?
    Thanks,
    Rodrigo

    Have you read the release notes for Color and made sure that there are no 'gotchas' in the sequence you are trying to send to Color?
    There's a chance that there's something in the timeline that Color doesn't like. Take that out or depending on what it is, 'bake' it in and you will increase your chances of getting the Send To to work.
    Good Luck!

  • Mail app is crashing when sending e-mail from Yahoo

    When sending an e-mail from the Mail app, the "Sending..." bar shows up, and then the application shuts down and puts me back at the home screen.
    The email gets through though.
    (Using Yahoo to send)

    I, too, was having the same problem of blacking out and returning to home each time I sent an email with Edge. I put the phone to sleep, did a hard reset and re-added my account several times. Each time I came back to mail the message was waiting to be sent again. I finally checked my sent mail and it showed up as being sent 22 times. Apparently you should check the sent folder to make sure if it went through or not before trying again.

  • Send to 'Shake' from FCP not working

    Well i sort of lie, it does open shake and open a file, but it's never the correct footage. He's is what I do, tell me if I'm doing something wrong.
    1. Select footage that I need to do some shake suff with by highlighting it in the FCP timeline.
    2. Go to 'File' 'Send to' Shake
    3. Shake opens but with a completely differn't part of the video I am editing. The only way I have found for it to work is to actually export the clip and use the 'Filein' into Shake, which works, but is time consuming.
    Can anyone help.
    Thanks.

    If you have a speed change or maybe subclips, you could get what you're describing...
    Patrick

  • Shakey Motion Titles When Authored to DVD From FCP

    Hi all, i'm having a real nightmare getting motion titles in to an FCP project then authoring to iDVD.
    This evening i tried embedding some streak titles in to a piece of a footage in FCP, i use the 'Send to Motion' function. The project looks absolutly fine when played back in FCP but when i author to DVD the section with Motion in is very shakey, it's a very quick shake and it comes more across as very weak distortion. The motion titles look great but it throws out the rest of the footage.
    I've tried setting the field order to none and it only slightly helps. Both of my resolutions are 720 x 576 PAL, FCP Footage is DV PAL 48 KHZ.
    Can anyone help????

    Hey David,
    Thanks for the suggestion. Unfortunately, I don't have Squeeze...
    If I use the crop tool, that leaves a black border around the frame that's visible when I open the exported QT in the QT player. Was there another way of doing it?
    Michael

Maybe you are looking for