Speed dial feature

I am having g trouble finding how to set up the touch and hold speed dial functions on my bb10. Is this still available on this phone? If so where would I find it? Thanks in advance.
John 

Speed dial is little diffrent on the Z10 than the old BB smart phones. Instead of pressing a number on the dial pad to dial someone.  It puts an icon on your list, up to 9 including your voicemail icon. To do this, click on the phone icon on your home page,  Click on Contacts, Find the person you want to add to speed dial, Click on their name and their phone numbers slid out. Select which number of your contact you want on speed dial and hold it down for 2 seconds. A little Star pops on the right, click on it and it will add to your speed dial .To make it easier, add a picture to your contacts and it will have their picture on the speed dial. 

Similar Messages

  • CUCM 4.3 using BLF and Speed Dials features.

    Hello,
    Does anyone has some informations about if BLF and Speed Dials work with CUCM 4.3
    We have tested it using 6.1 and it works
    We have the needing to use both features Speed Dials ( and not Call Park ) and BLF.
    Thanx in advance
    Marco

    Hi Marco,
    Sadly, support for BLF/Speeddials was not added until CCM 5.x so these features are not supported in CCM 4.3
    Hope this helps!
    Rob

  • 5800 - cannot speed dial and dial from handsfree c...

    I verified the following behaviour of the new 5800 which seems to me to be a bug, because it works on other nokia series 60 phones:
    Because I synchronize my phonebook with MS Outlook, phone numbers have the syntax "+43 (1) 9876543". These phonebook entries can be dialed without problems when I call using the phonebook.
    But if I use the speed dialing feature (press and hold e.g. key "2" ), I get the message "Nicht gestattet" (German, means "not allowed" ), and the number is not dialed. If I delete the spaces and the brackets, dialing is possible without problems.
    The same behaviour can be seen if I try to dial from my built in handsfree set in my car with numbers as described above.
    Before the 5800 I used a E65 and a 6120c, there the syntax described above worked without problems.
    Software: v11.0.008.red.01
    Any clues?
    Best regards,
    Thomas
    Message Edited by tez1 on 04-Feb-2009 11:52 AM

    magpie68 wrote:
    FIX... 
    I got this, I found out it happened when the number has spaces in it.
    Try cleansing the number of all spaces and punctuation (and prefix with +country code)
    This works for me.
    Alan
    Sorry, this is no fix, this is a workaround. It is clear, that this will avoid the problems. But PIMs like MS Outlook create phone numbers in this format; after synchronization with my phone, there are spaces in all of the phone numbers. Therefore I suggest, Nokia implements this like for all other S60v3 phones. This would be the only fix. Regards, Thomas.

  • System-wide Speed Dials

    Is there a way to set up speed dials system-wide in UCM 5.1? We have about 25 remote locations and we want anybody in the company to be able to use speed dials (or something similar) to dial their main number. We don't want to add them to Active Directory because there are other apps pulling from there.

    Depending on configuration, your phone can support several speed-dial features:
    Speed-dial Numbers
    Abbreviated Dialing
    Fast Dials
    http://cisco.com/en/US/products/hw/phones/ps379/products_user_guide_chapter09186a00806453c0.html#wp1009061

  • CME 4.0 bulk speed dials

    I need to use the bulk speed dial feature in CME 4.0. I have set up the lists and tested calling.. All this works fine. However, I need to enter pauses in the dial string. The administration doc indicates that a comma should insert a one second pause. This does not work and also seems kind of wierd for a csv file.. Anyone get this to work??
    Thanks!
    -Patrick

    Hello Patrick,
    being that it is a csv(comma seperated variables) you'll probably have problems with this. To get the csv file to accept the commas as part of your string you will have to put quotes around it. Example
    "123,,,456,,,",test,test
    Patrick

  • PLEASE PLEASE HOW CAN I UNINSTALL SPEED DIAL?

    I desperately want to get rid of the Speed Dial feature which I find extremely irritating.
    Nowhere in Firefox's drop-down menus is there an uninstall facility
    Can anyone help me? If Firefox can't help. I'll simply change to another
    internet service.
    Des Evans

    Type '''about:config''' in the url-bar and press enter. Press "ok", "whatever" or "shut up already" if the browser asks stupid questions. Enter '''browser.newtabpage.url''' in the search bar and set it to "about:blank". Source: http://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  • Speed dialing by letter on Droid 4

    I bought a Droid 4 when my Palm Centro died. One of the features I liked was the ability to assign a letter for speed dialing. A letter is much more easily remembered than a number. Is it possible to assign a letter for speed dialing on the Droid 4?

    Jennifer,
    I appreciate your prompt reply re: Direct Dialing feature.   I think this feature is a good one for those that chose it.  However, I am extremely unhappy that the "speed dialing" feature (press and hold a number button) has been arbitrarily removed from Jelly Bean.  Opening the folder of Direct Dial icons may be faster in some cases, when dialing only amongst a  group of friends, rather than opening the dialer and dialing for business use or for dialing friends by holding a button, although I cannot see how.  It certainly lacks consistency with prior Android interfaces and without other phone and other user interfaces.  This was a bad decision and I hope Verizon can be an advocate for the return of true speed dialing in the next Android release.
    Regards,

  • Applying speed dial in firefox 8

    how to apply speed dial feature in firefox 8 as this feature is available in opera and it should also be present in firefox

    hello galane, please refer to the following article in order to switch the new tab page off: [[New Tab Page – show, hide and customize top sites]]

  • Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

    OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
    Looks like the simple part is using it  - just press and hold the digit to dial the whole number.
    So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

    Seemed like there should be a speed dial, so I did  a search & found the cure is worse than the disease -
    Dial from your phone
    Make calls directly from your existing touch-tone home phone:
    Local calls: Dial the 7- or 10-digit phone number.
    Long distance calls: Dial 1 + area code + 7-digit phone number.
    International calls: Dial 011 + country code + 7-digit phone number.
    Dial online from your myAT&T account
    Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
    Log in to myAT&T. Don't have a myAT&T login? Register today!
    From the I want to menu, select Manage my plans and services and then Manage my phone features.
    Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
    Enter a number to dial or select a number from your Call History or Address Book.
    Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
    Select Place Call.
    When your home phone rings, pick it up to place your call.
    Important Note
    To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
    Dial from your U-verse TV
    With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
    Tune to Channel 9900 using your U-verse TV remote.
    Select a U-verse Voice phone number on screen.
    Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
    Scroll using the arrows.
    Select a number and press OK to return a call.
    Select Call and press OK.
    When your home phone rings, pick it up to place your call.
    You can have a call list accesed from a browser.
    You can call back a historical call from the browser or TV.
    https://www.att.com/esupport/article.jsp?sid=KB401002

  • How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

    You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
    This is the page that loads:
    http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
    How did Yahoo embed this in the Tab settings?

    Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
    You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Speed Dial is replaced by another program instead of the program opening in a new tab. How to resolve?

    I have been using Speed Dial for a long time and when I click on a button, usually a new page opens, leaving Speed Dial available. Recently, every time I click on a Speed Dial button, the new page opens in place of Speed Dial. If I want Speed Dial again, I have to back up page by page or restart Firefox. This has only happened recently and is very annoying. Any help will be appreciated. thanks.
    Also finally remembered that instead of clicking on the speed dial icon, I can right click on it and click on "new tab". That way it will come up in a new window. This is not the way it always worked. Wonder why the change?

    If you have a mouse with a scroll wheel then you can usually click that button to get a middle click.<br />
    If you still have a mouse with only two buttons then you can consider to buy a new mouse with a scroll wheel as that makes scrolling a lot easier and also make use of Firefox features regarding a middle click.<br />
    Most mouse drivers also allow to emulate such a middle click by pressing both mouse buttons at the same time.

  • Sir, i set the speed dial in home page,but when i open the new tab its show only the blank page,can you say the ways to show the speed dials whenever i open tab

    plz say the way to set the speed dials which i set in home page whenever i open the new tab instead of blank page

    Make sure the new tab feature is enabled:
    * On the address bar, go to '''about:config''' (Just be careful)
    * Set '''browser.newtabpage.enabled''' to '''true'''
    To set the homepage to show the new tab page:
    * Go to Firefox Menu > Preferences > General
    * Set '''When Firefox starts''' to '''Show my Home page'''
    * Set '''Home Page''' to '''about:newtab'''
    So that a new tab opens the new tab page
    * On the address bar, go to '''about:config''' (Just be careful)
    * Set '''browser.newtab.url''' to '''about:newtab'''

  • Unable to Edit Number Locked In Speed Dial Position

    All my Speed Dial listings were ported over to a new 8900 from an 8300.  I also changed carriers.  Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300.  That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900.  I am unable to delete the old number so I can enter my new carrier's voice mail access number.  There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate."  It would be nice to know how to delete that feature, too.  Can anyone help?

    There are three keys preassigned 
    A Lock System
    Q Change to vibrate
    W Voicemail
    You can change this ones, but if for any reason you reset the device, the preassigned keys come back
    To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
    Remember to create a new contact called Voicemail or something like that to change the Voicemail Key. 
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • Speed dial only has one icon, to open up the windows. Another used to be on the other end of the tool bar for entering websites into the windows. Also do not know how to form another group.

    I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
    Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
    My Computer is an HP p6653w and my default browser is Firefox 3.6
    My operating system is windows 7.

    Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
    First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
    To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
    Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
    You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
    If you need, the latest software can be found below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
    Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
    Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
    The ensure you use the correct contact details lease double chekc it below:
    http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Q10 speed-dial and texting issues

    Hi there,
    I am setting up a q10 for my wife, and i also have one.
    I cannot do speed dial on my q10. I have two brand new identical devices and one can do speed dials, and one cant.. I can set up the speed dials, but it doesnt activate when i do a longpress.
    Also when i longpress a number in my call log it doesnt give me the option of sending a text, whereas my other devices does.
    Also when i play a song it deosnt give me the choice to add that song as a ringtone whereas it gives me that choice and other choices on my other device.
    My questions are:
    Is there a way i can restore some defaults to have these features, or change options so i can have these same features that i have on my idetical device.
    or is the second devices faulty> Seems odd that it would be as its brand new.

    Hi Husam,
    Thank you for your questio.  However this community is for Cisco Small Business Products and the PLW400 is a Linksys product.  Here is the area that may help you further with your question. http://support.linksys.com/en-us/support/powerline/PLW400
    Regards,
    Cindy Toy
    Cisco Small Business Community Manager
    for Cisco Small Business Products
    www.cisco.com/go/smallbizsupport
    twitter: CiscoSBsupport

Maybe you are looking for