Speed Dial with CME

Hello guys,
In server based CallManager, users can go to the "servername/ccmuser address and setup their own seepdials. Is there any way that we can offer this service through CME 3.3?
Thanks

Thanks Sankar,
The only issue is that the CUE user page has access to the same features that an admin has and I don't want that.
I have a 7940, how many speedial can I configure for this phone? In the documentation it says up to 24 speedials. My question is where is it going to show all those 24 speedials? Would it be on the screen? or under Directory buton, Local Speed Dial?
And my last question is what is the difference between speed dial and fast dial?
Thank you for taking the time and responding,

Similar Messages

  • Speed dial with separate CSS from primary line

    Hello All,
    I have a question about the possibility of using speed dials on a phone in a somewhat restricted sense. What I would like to do is setup a phone with a primary line that is only capable of making internal calls within our organization, and set a few speed dials that can call outside in the local area code for on-call techs. From what I see speed dials can't be set to a specific CSS, which leads me to believe that phone will just use the CSS of the primary line when making speed dial calls.
    The question is, is this possible without messing around with custom CSS's and route patterns?

    No, as you have seen, they will use the CSS from the configured DN to make the call, they cannot be configured with a separate CSS

  • Speed Dial in CME

    Hello good Morning.
    I wonder how to set up speed dial on Call Manager Express
    Thanks.

    Hi Jaime,
    Check out the following guide:  http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmespeed.html
    HTH,
    Chris

  • Can you speed dial with iPhone?

    Is it possible to speed dial from iPhone 4s?

    There should be a speed dial pad on the lock screen so you can touch one icon and be calling immediately
    It's called a "lock screen" for a reason - functions are locked so they don't get accidentally activated when picking up the phone or touching it in a bag or pocket. Or to prevent a thief from running up a nice big phone bill for you.

  • "Temp Fail" with BLF Speed Dial + Call Pickup

    Good day All,
    I am running CUCM version 8.6.2 and many IP Phones 7962G.
    I have a Manager configured with extension 1001 and his PA with extension 1002. Both extensions are configured in the same Call Pickup Group.
    On the PA IP Phone, the second button is configured as a BLF Speed Dial with Call Pickup for the Manager.
    When someone calls the Manager, she can see that the Manager Line is ringing but when she press the button in order to pick up that calls, she hear a busy tone and the IP Phone display a message that says "Temp Fail". I have checked every thing on both IP Phones and all seems to be correct. Am I missing something may be?
    When I changed the Manager Line from 1001 to 1003, in the same Call Pickup Group, thats works fine. She is able to pick up calls for 1003. But on the CUCM Server, there is no such difference between extension 1001 and 1003.
    Please advise.
    Warm regards,
    J. Kabundi.

    Which PickUp group they belong doesn't matter, don't need to be the same for the BLF PickUp Feature.
    But if they are in the same group as you mentioned: Can the pickup via the normal PickUp Softkey?
    If changing only the Number makes it working i think you may have a problem with the DNs/Partitions. Ever renamed the partition? Try deleting the manager DN, remove the unassigned number from your server, and add it again.
    If it still doesn't work... i would restart the whole server if possible.
    Regards,
    Sven

  • Steps to Configure Speed Dial

    Hello,
    Need steps to configure speed dial.
    Thanks
    Abhishek

    Hello,
    Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone /  UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
    The UDP profiles has to log out and login back for the changes to take effect.
    Hope this helps..
    Please let me know whether this was infromative or not.
    Thanks

  • Everytime I start firefox my speed dials are emtpy, how can I set my speed dial to keep what I put on it

    '''I have set up my speed dial with my favorite websites but everytime I go out of my firefox browser then start it up again my speed dial shows up as empty...why is this?'''

    In case you are using "Clear history when Firefox closes":
    *do not clear Browsing History
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

  • Speed dial programs on SPA-932

    On the SPA-932 (attached to an SPA-962), is there any guide to configuring the keys to perform a speed dial with a delay?
    I am trying to set a key to perform a transfer which requires dialing # and then a number.  It is going to park a call so the extension is pre-known, but when I tried setting the key to fnc=sd;sub=#700@pbx-ip-here it never performed the transfer.  It appears the digits are transmitted to rapidly that the 700 happens before the transfer process initiates so it never transfers.
    Is there a way anyone else has done something like this or has been able to get this to work?  This is an Asterisk PBX for what its worth.
    Thanks!

    Yup, I had posted and then after it didn't show up for a few hours I had posted again thinking maybe I had just done something wrong or mis-clicked.  Then realized it was in moderation queue.

  • Speed Dial Prefixes?

    Hi
    We are using CUCM 10.5 with 7921, 8851 and 9951 phones.
    Is it possible to do speed dials with Prefixes?
    Effectively the client wants to be able to press a line button and have it prefix a number they are about to dial.
    Example...
    Client hits line button
    The phone puts a prefix of 92 on the screen
    Client then dials the rest of the number.
    Thanks

    Hi,
    Such a feature is not available natively in CUCM.
    HTH
    Manish

  • CME 4.0 bulk speed dials

    I need to use the bulk speed dial feature in CME 4.0. I have set up the lists and tested calling.. All this works fine. However, I need to enter pauses in the dial string. The administration doc indicates that a comma should insert a one second pause. This does not work and also seems kind of wierd for a csv file.. Anyone get this to work??
    Thanks!
    -Patrick

    Hello Patrick,
    being that it is a csv(comma seperated variables) you'll probably have problems with this. To get the csv file to accept the commas as part of your string you will have to put quotes around it. Example
    "123,,,456,,,",test,test
    Patrick

  • Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

    OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
    Looks like the simple part is using it  - just press and hold the digit to dial the whole number.
    So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

    Seemed like there should be a speed dial, so I did  a search & found the cure is worse than the disease -
    Dial from your phone
    Make calls directly from your existing touch-tone home phone:
    Local calls: Dial the 7- or 10-digit phone number.
    Long distance calls: Dial 1 + area code + 7-digit phone number.
    International calls: Dial 011 + country code + 7-digit phone number.
    Dial online from your myAT&T account
    Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
    Log in to myAT&T. Don't have a myAT&T login? Register today!
    From the I want to menu, select Manage my plans and services and then Manage my phone features.
    Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
    Enter a number to dial or select a number from your Call History or Address Book.
    Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
    Select Place Call.
    When your home phone rings, pick it up to place your call.
    Important Note
    To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
    Dial from your U-verse TV
    With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
    Tune to Channel 9900 using your U-verse TV remote.
    Select a U-verse Voice phone number on screen.
    Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
    Scroll using the arrows.
    Select a number and press OK to return a call.
    Select Call and press OK.
    When your home phone rings, pick it up to place your call.
    You can have a call list accesed from a browser.
    You can call back a historical call from the browser or TV.
    https://www.att.com/esupport/article.jsp?sid=KB401002

  • Need help with speed dial on Continuum

    I've read the book which isn't very helpful for a new user. Can anyone help me set up speed dial on the Continuum?

    Hi jackiejunque,
    Welcome to the wonderful world of Smartphones! We do offer in-store or online Smartphone Workshops to help customers get acclimated with their devices.  Additionally, here are the steps on how to add or remove speed dials:
    Add Speed dial
    From the main screen tap Phone
    Tap Menu
    Tap Speed dial settings
    Remove Speed dial
    From the main screen tap Phone
    Tap Menu
    Tap Speed dial settings
    Tap Menu
    Tap Remove
    Select the contact to remove from speed dials and press the "Red X" icon to remove
    I hope this information is helpful as you begin to explore your new device.  Please let me know if you have any additional questions.
    Thank you,

  • Problem with speed dial

    Hello,
    Just picked up my iPhone 5 and noticed an existing speed dial from my favorites is not working properly.
    My speed dial contains a 10 digit phone number, a 10 digit access code, and a 5 digit password all separated by commas.  When activated from my favorites the phone number dials perfectly but the 10 digit access code, and a 5 digit password dials very slowly and my system does not recognize the entries.
    I deleted the favorite from my contacts and re entered it with the same result. Even re installed ios 6 but no help.
    This feature worked perfectly on my iphone 4. 
    Any ideas your help would be greatly appreciated.

    All,
    Just went to a Verizon store and conducted a test. I used an iPhone 4S and a iPhone 5 both running ios 6. The 4s dialed a programmed speed dial containing an access phone number, a access number and a password. It worked flawlessly. Ran the same series of numbers on the iPhone 5 (not mine) and it failed miserably. 
    I hope that apple can provide a fix for us speed dialers. It's quite annoying. 
    Thanks

  • Two things came with my Firefox when I downloaded it. Speed Dial and Xmarks. When I start the program it locks up and I have to just shut it down. How can I delete them? I only want the Firefox.

    When I downloaded Firefox I had two things download with it. Speed Dial and Xmarks. I don't know about either and don't want them. I cannot delete them alone it seems. When it all loads it locks my computer up totally. I cannot x out of anything. Just kind of "thunks" with a dead sound. My facebook applications runs better on Firefox but I can't seem to get it downloaded alone. What am I doing wrong? I do not want the speed dial for sure. Don't know about the Xmarks.

    Where did you download Firefox from?
    The official Firefox download doesn't come with either of those addons.
    http://www.mozilla.com/en-US/firefox/
    or
    http://www.mozilla.com/en-US/firefox/all.html

  • 7970 on CME 3.3 personal speed dial not working

    I have a 7970 running term70.7-0-2-0s on a CME running 12.3(14)T7. The personal speed dials work fine on 7960 but they do not show up on the 7970. Does anyone have any ideas?

    you are hitting CSCsc43694 which is duped to CSCsb22990 need to upgrade I suggest 12.4(3c)

Maybe you are looking for