Speed dials on 500S buttons?

Having discovered the "dialable intercom" feature, I now have quite a few extra buttons on the 500S sidecars.
Is there a way to assign speed dials to these buttons? I'm trying to think of a way to increase utility and I have about 20 buttons free, so speed dials may be a handy way. This particular office dials a lot of corporate numbers from each of their phones a lot (calling trucking companies and storage companies).

Hello John,
Yes there is by using CCA 3.2. In each of the user's extension, there is a tab labeled Speed Dial. For the SPA 500 phone with the 500S, you will see the buttons to include not only the SPA500, but also the side cart. Below is the screen shot.
Hope this helps.
Bert

Similar Messages

Speed-dials MIA on 7921/UCM6.1

Hi,
Recently migrated a customer to UCM6.1 from 4.3 and experienced an interesting issue. Speed-dials is no longer showing up on 7921-phones (f/w 1.2.1). The speed-dials and phone-button templates are correctly configured, but they refuse to show up when pressing right on the nav-pad.
7921-phones were running the same f/w when CM was 4.3 and there it worked just fine. As a proof-of-concept, we have attempted to configure additional lines as well as reassigning buttons to BLF SD, which both works fine and shows up as expected on the phone. It seems that it's just regular SD's that won't show up...
Using BLF's instead is not really a possible option, since that would remove the users ability to modify the SD's by themselves.
Anyone with any ideas regarding this issue and how it can be fixed? :-)
Thanks in advance.
Best regards,
/M

Is the user account correctly associated with the MAC address of the phone? It's under the "Device Association" link in the user options setup in CallManager if memory serves.

BUG: Speed Dials not functioning correctly when Option button is last used

There is a bug in WebOS where Speed Dials do not work correctly. Holding down your speed dial favorites button will not place the call. This happens when the option key is used in launcher or card view before attempting speed dial.
For instance if your last character of a search you did 4 hours ago on your phone contained a series of numbers and you locked the option key to do so, (or even if you accidently hit the option key last and then did not need it) then an attempt to use speed dial "G" will not work, as your Pre/Pixi thinks you are holding down the "6" key and not the "G" key.
This needs to be remedied (for instance have the option key press clear out or unlocked as soon as the search is performed or cleared off of the phone) because there is no way to tell what state the option key is in before using a speed dial (not that I want to check and fiddle with it anyway).

The Z and B keys are the * and # keys. That is why they are not in the speed dial list. Hmmm... while it might be a "bug" at this time your the only person having this issue as far as I can tell. Since the issue moved to another phone it could be that its related to your Palm Profile. I unfortunately cannot replicate this issue but would like to test something. Can you do a Partial erase on your device and create a new Palm profile? This will see if the issue is still on the device.
If it is not then the issue is within your Palm Profile. If that is the case I can help you from there. Please post back when you tried this step.

Using speed dial button as paging on provisioned 525g's

Hello everyone!
We recently switched to a hosted phone provider with provisoning for our 2 SPA525G2's but still want to maintain an internal paging function between them using a speed dial button. For less confusion, lets call in ex5.
I have successfully created a dial plan and am able to dial *96 + extension number to activate the paging system. My objective is to just hit ex5 and having it automatically activate the paging function.
I feel I'm very close but need help with the last step.
Please help!

Thanks for your response!
Question, wouldn't that use my provisioned phone system still? How could I directly dial the LAN side IP?
I currently have (<5:[email protected]:5060>S0|xx.<:@192.168.0.104:5061>) which allows me to call the other phone but not page it.

Deleting a Speed Dial Button

How do I delete a Speed Dial key? Somehow I accidently assigned a speed dial letter to "lock phone" and need to get this deleted.
Thanks

You can hit your green phone button to go into your call log screen. After that screen comes up, hit the menu button, and choose View Speed Dial List. See if you can delete it from that screen
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
Looks like the simple part is using it - just press and hold the digit to dial the whole number.
So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

Seemed like there should be a speed dial, so I did a search & found the cure is worse than the disease -
Dial from your phone
Make calls directly from your existing touch-tone home phone:
Local calls: Dial the 7- or 10-digit phone number.
Long distance calls: Dial 1 + area code + 7-digit phone number.
International calls: Dial 011 + country code + 7-digit phone number.
Dial online from your myAT&T account
Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
Log in to myAT&T. Don't have a myAT&T login? Register today!
From the I want to menu, select Manage my plans and services and then Manage my phone features.
Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
Enter a number to dial or select a number from your Call History or Address Book.
Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
Select Place Call.
When your home phone rings, pick it up to place your call.
Important Note
To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
Dial from your U-verse TV
With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
Tune to Channel 9900 using your U-verse TV remote.
Select a U-verse Voice phone number on screen.
Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
Scroll using the arrows.
Select a number and press OK to return a call.
Select Call and press OK.
When your home phone rings, pick it up to place your call.
You can have a call list accesed from a browser.
You can call back a historical call from the browser or TV.
https://www.att.com/esupport/article.jsp?sid=KB401002

How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
This is the page that loads:
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
How did Yahoo embed this in the Tab settings?

Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Speed Dial is replaced by another program instead of the program opening in a new tab. How to resolve?

I have been using Speed Dial for a long time and when I click on a button, usually a new page opens, leaving Speed Dial available. Recently, every time I click on a Speed Dial button, the new page opens in place of Speed Dial. If I want Speed Dial again, I have to back up page by page or restart Firefox. This has only happened recently and is very annoying. Any help will be appreciated. thanks.
Also finally remembered that instead of clicking on the speed dial icon, I can right click on it and click on "new tab". That way it will come up in a new window. This is not the way it always worked. Wonder why the change?

If you have a mouse with a scroll wheel then you can usually click that button to get a middle click.<br />
If you still have a mouse with only two buttons then you can consider to buy a new mouse with a scroll wheel as that makes scrolling a lot easier and also make use of Firefox features regarding a middle click.<br />
Most mouse drivers also allow to emulate such a middle click by pressing both mouse buttons at the same time.

I can no longer Dial my speed dial numbers by bluetooth after GB update....HELP

I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help

Adam819 wrote:
I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help
Food for thought: There is actually information released by the NTSB that even using "hands free" devices while driving have been proven to distract drivers.
As for the Bluetooth commands: I've never used "speed dial" I usually say "Call Nicole Mobile" and it will connect still with no problems.
I just tried to use the voice command "call speed dial 1" and it did not recognize it. It appears you must use the name now.

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

How do I open a new tab on speed dial?

I have speed dial as my home page which is fine, but when I click on one of the boxes it loads in the same tab. How do I open them in a new tab?
== This happened ==
Not sure how often

From the [http://speeddial.uworks.net/accessingentries.html Speed Dial homepage Manual]: "If you hold the "Shift" key while clicking, the URL will be opened in a new window. Holding the "Control" key, or using middle button click, will open the URL into a new tab."

Freetalk-1200 Connect.Me speed dial problem

Just received my long awaited Connect.Me and it's been working just as I expected. The only problem I encountered was that I couldn't assing speed dial numbers to 2 of my contacts. Others work perfectly, when I click them, box of information appears to the middle of the screen, but when I click one of the two with the problem, nothing happens.
I have tried everything like resetting from the button and from the web UI, deleting and adding them again to my contacts but nothing helps. Adding new contacts works fine. I would not rather create a new Skype account for my self - nor ask these two friends to make a new account for themselves - just because of this problem. Any kind of advice is welcome
Cheers from Finland!

Skype hasn't supported speed dials in it's software for some time. It's considered a legacy feature. The use of speed dials is configured through the Freetalk Connect Me web interface, not the Skype client. You need to sign into your Connect Me device via your web browser and click on "Contacts and Speed Dials". Once there all your contacts will be listed on the left pane. Select any one of those contacts and click "ADD TO SPEED DIAL". It will assign a speed dial number incrementally on the right pane. You can change that number to a number of your choosing (0-99) at any time. That's all it takes to set up. If you recently add a contact it my not show on that list. If it doesn't sign off the client in which you added the contact or contact changes, then power cycle the Connect Me box and log back in. It should update. If it does not, the only other alternative is to do a factory reset on the unit so that it will purge the list and updated it with the latest copy. Below I attached an image of the screen, though it may take some time until it gets approved and displayed to the general public.

Nokia E61/Speed Dial - Invalid number error

I have synchronized with my outlook to pull my contacts into the phone. I can dial out of the contacts just fine but when I try to assign one to a speed dial button I get an "invalid number" error. If I create a new contact, it works when I assign it but not when I used one pulled in from my Outlook contacts. Any ideas?

I just noticed something similar to this problem on my E65.
If I assign a number to my SpeedDial (eg. +61-3-9999-9999) it will work if I use the hard key button to invoke the speed dial.
But if I start the Speed Dial application and use that interface on the GUI to call the interface the E65 complains "Invalid Phone Number".
It is strange the the hard-key speed-dial will work, yet the application interface doesn't.
Any suggestions?

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the phone or in the manuals on how to set up speed dial.

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the manual or online about speed dial.

BToddP, I completely understand wanting to customize your phone the way you once had it on your old phone. Fear no longer, help has arrived! Please review this link for additional assistance: http://spr.ly/6588AEzw Let us know if you need any further assistance. Thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Changing The Speed Dial Icon [Custom Pic For The Top Sites]

how do i change the pic for the top sites on the speed dial. can i use a custom images like on chrome or opera??

You can use virtually any image or link as an email button, the sky is the limit. To do this just insert your image into iweb and click on the inspector button, from here you go to the very last button called the link inspector, enable as a hyperlink and chose an email message. You can then put the url of the email address you wish to link it too. As far as customizing the look I would start with one of the blank page choices. Again to specifically customize the look of your menu or anything else on the page use the inspector. If you want to create your own menu there is an option not to display navigation on your page, and this allows you to have complete control of how your page looks. Create a simple page, open up the inspector, and have some fun creating your own pages. Hope this helps.

Speed dials on 500S buttons?

Similar Messages

Maybe you are looking for