Speed/Duplex are not advertising correctly with configured values

Hi,
I have a gateway which runs on Windows Embedded Standard 7 which has Intel NIC Card.
I have connected this gateway and a switch in a network where switch has configured speed/duplex as 1000Mbps/Full.
When I set the Speed/Duplex on my gateway's NIC to Auto-Negotiate or 1000Mbps/Full, it negotiating/advertising the speed and duplex properly.
But when Speed/Duplex sets to 100Mbps/Full on gateway's NIC, in the Switch it shows that my gateway is advertising the Speed/Duplex as 100Mbps/Half Duplex.
I have checked the registry entries which sets when we configure the Speed/Duplex at adapter properties, registry entries are fine. I am not able to understand how exactly it negotiates Speed/Duplex and why it is advertising with 100Mbps/Half Duplex when
it is configured for 100Mbps/Full.
Thanks,
Challask

Hi Andy,
Thanks for the reply.
I have checked that the configured value on the adapter is 100Mbps/FullDuplex. I am checking these configured values through the registry entry
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\00NN\*SpeedDuplex. It shows the configured value.
The doubt have here is that i have checked the enum values for this *SpeedDuplex entry, it shows in the following way:
0 - Autonegotiation
1- 10Mbps HalfDuplex
2 - 10Mbps FullDuplex
3 - 100Mbps HalfDuplex
4 - 100Mbps FullDuplex
6 - 1000Mbps
Why don't have here the value 5?
I have checked this registry in other Windows Operating systems, it shows correctly. Only in this Windows Embedded Standard 7 OS it shows this way. Will it create any issue? While performing the Speed/Duplex advertisement/Negotiation will it use these enum
values? If so how can I resolve this issue?
Thanks,
Challask

Similar Messages

Playlists on iTunes are not syncing correctly with iPhone on iOS 7-only 48 of 134 songs on one playlist are appearing (all songs are checked and I've tried this both hardwire and wireless)...help!

So, I could use help from people who know mre about this than I do. I did a sync last night between iTunes on my Mac (latest version of iTunes) and my iPhone 5 running iOS 7. For some reason, about 90 songs in one of my playlists have disappeared.
The songs are all checked in the playlist in iTunes
The songs were all on the iPhone playlist prior to the sync
I've tried a sync again both by hardwire and wifi
I added a song to the playlist on iTunes and the song appeared in the iPhone playlist, but none of the other 90+ songs came back
I haven't checked my other playlists to see what is there and what isn't (I have lots of music, so this would take days to verify).
I've thought about managing my music manually, but I would have to rebuild everything from scratch on the phone which would take days and I'd never get everything back to the right place.
In as much as I'm otherwise liking iOS 7, the new iTunes app for iOS 7 has been a real pain. This is what's really put me over the edge on it!
If you all have any suggestions that could help, I'd really appreciate it! The playlist I'm referencing most specifically is my most-used playlist and I'd love to have it right.
Thanks!

Hi oxman78,
That definitely sounds frustrating! Let's give this a go to see if we can isolate the issue futher:
First, connect your device and choose the "Music" tab. Next, uncheck the "Sync Music" checkbox, and apply the changes (so there is ultimately no music syncing to your iPhone).
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
Cheers!,
Matt M.

IPhoto events not syncing correctly with iPhone

Hello,
Basically, my iPhoto events are not syncing correctly with my iPhone. Some events will sync, whereas others won't, though no error messages are ever displayed.
I have all my photos, 961 photos in 34 events, organised in iPhoto, however iTunes doesn't seem to recognise all of these events, only reporting 881 photos. I've got iTunes set up to "Sync photos from iPhoto - All events" and this works for most events, but not all.
On my iPhone, I can tell which events are missing, but no matter how many times I restart my Mac or sync my iPhone, it refuses to sync the few missing albums. There is over 4Gb of available space left on the iPhone, so this shouldn't be an issue.
Many thanks in advance.
Peter.

Any ideas, please? I hope I explained my issue clearly enough.
Thank you,
Peter.

With IE UIX buttons are not displayed correctly

Hello there,
We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
Thanks,

Hi Andy,
sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
it happens with random buttons...
i haven't seen this problem in mozilla. its quite frequent in IE.
our customer is very annoyed by this problem :(

I just updated my 4S with iOS 8.1.1 and now my screens are not proportioned correctly - just a bit to long and wide. Is there a way to adjust? Or go back to 8.1?

I just updated my 4S with iOS 8.1.1 and now my screens are not proportioned correctly - just a bit to long and wide. Is there a way to adjust? Or go back to 8.1?

lisan1234,
I am sorry to hear about the screen issues. To clarify, do you only notice the screen proportion difference when in a certain application? By to long or wide are you stating that parts of the screen images are cut off? Please provide details
LindseyT_VZW
Follow us on Twitter @VZWSupport

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

Do I understand correctly that I have to buy the new version for $149.00?
You can upgrade for $79.
Products

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

PO screen custom fields are not in correct order

Hi Experts,
After creating Shopping cart and purchase order successfully created.
Added my custom fields for PO structure INCL_EEW_PD_ITEM_CSD_PO fields are visible in PO screen automatically with out adding my custom fields in PO layout /SAPSRM/WDC_DODC_PO_I_BD
when i go to PO screen i can see my custom fields but all fields are not in correct order.How can my fields should be in order.
and i added two custom buttons in my PO layout for WD component /SAPSRM/WDC_DODC_PO_I_BD i am not able to see my buttons?
Could you please help me out in this issues its urgent.
Thanks,
Venkatesh G

I've had this problem. There may be a more elegant solution, but what I do is make a playlist of the album and put the movements in the correct order in the playlist. I've also put numbers (01, 02, etc.) in front of the name of the movements. Either one works.
Hope this helps.
Ben

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Entity Descriptions are not displayed correctly in Combo box dropdown list

In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?

Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha

Files from Windows 7 are not alphabetized correctly on OS X, and can match identically named files in the same folder

I receive MS Word files from students using Macs or Windows-based computers. This year, files prepared by students using Windows 7 are not alphabetized correctly on my Mac (under Snow Leopard or Mountain Lion). The same four students keep having their files put at the END of the alphabetical sort by name, even though the files should appear earlier in the list. I have to copy the file contents and paste the contents into a new document to get the new document to appear in the right order, and if I do so, then BOTH the old and new files appear in the Finder, even though the names appear to be identical! So can have to files with the same name in the same folder, which ought to be impossible. Does anyone have any idea what's going on?

Bingo!
The problem is not the letters themselves, but non-letter characters in the file name; this showed up with the fixed-width fonts. The apparent duplicates and mis-sorting are caused by dashes, which differ because they're done as en-dashes in one file name and em-dashes in the other file name, or by curly or straight apostrophes. I didn't see that in the Finder window.
I never saw this behavior before this year. Last year, when I was using a Mac for the first time, I did not see any such problem, even though my students' files were named using the same conventions. When I was using a Windows-based laptop before that, I never saw the problem.
Windows must do something to style the non-letter characters differently than a Mac. Is there any place in Windows Explorer or the OS X Finder that styles characters this way? I can see this being a big problem for someone who needs to sort very important data by name, when the files are coming from different operating systems!
(I just Googled en-dash, em-dash, and curly quotes with file names, and found a good number of posts on various sites about similar problems based on ASCI character coding, html coding, Windows Explorer, and other applications. Sometimes the files don't appear at all, because the application reading the file name can't deal with a certain ASCI code. What a mess.)

The maximize/minimize and close and buttons are not shown correctly when FF windows is maximized.

I have the same problem on all my computers, one running Windows 7 and two with Vista.
The three buttons in the upper right corner of the FF windows are not shown correctly. They are soft of cut off in the middle when the FF window is maximized.

It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf

Speed/Duplex are not advertising correctly with configured values

Similar Messages

Maybe you are looking for