Speed Issues Fixed In 9.1.2

Lost all my thumbnails updating to iPhoto 9.1.2 but rebuilding the thumbnail database solved the problem. Best of all, the speed issues are finally gone in iPhoto 9.1.2. Opening the application is way faster again (2 seconds as opposed to 12 seconds or more). Scrolling is way faster again. Can't believe it took this long for Apple to fix this mess. Nevertheless, iPhoto '11 feels like iPhoto '09 once again. Thanks Apple.

Similar Messages

Does Itunes 8 fix playback speed issue when downloading

Does the new Itunes 8 fix the slow playback speed issues whenever you are downloading music or a podcast within Itunes?

For the record, the reported issue seems to have been solved.
http://lists.apple.com/archives/cocoa-dev/2007/Oct/msg01012.html

Speed issues with Leopard or Kernel Panics try this..

I installed Leopard on a PB G4 1.5Ghz and was getting freezing, speed issues running Adobe apps and more recently kernel panics. Running Disk Utility did nothing.
But one thing worked wonders for me, hope it helps you.
Put the CD for Leopard in the machine and boot from it. Run Disk Utility and Repair Permissions of your hard drive.
It took 1 hour 30 mins but it wonders for me, so far....
Hope it helps you.

Funny eh?
I had a similar problem installing Leopard, installation went fine but when I restarted it wouldn't boot past the grey screen. I was disillusioned as I was eagerly waiting for Leopard, but I waited a few days and decided to boot from the install DVD and I repaired permissions, re-installed and it now works fine!
Must be a pre-requisite to use disc utility and fix those permissions!
Go figure?
B

2 problems with EA6300 both speed issue's

I got my EA6300 for a while now, overall for what it is used its doing ok.
Though recently i had to add a tv box to my network.
Connecting it to the router would not work, since it did not get a IP.
So i was forced to put a switch before the router.
So the network cable with the internet signal on it is first connected to the switch to which the tv box is also connected.
Then a cable supplying internet goes to the router, and another cable which is connected to my desktop pc.
Both router and switch are all gigabit ports, so that is one thing to rule out.
The PC is connected to the switch because if i connect it to the router then speed seems to be capped at 100mbit, while it should be capped at 1000mbit with the gigabit ports.
The PC network is gigabit also, and with a 100mbit cap i cap my internet also since it is faster then that.
So that is why i had to connect the PC to the switch.
Could adding a 4 port gigabit switch make the router cap the amount of speed it lets through?
Because this seems to have started when i added the switch, before that everything was fine.
Then problem 2.
To the router i got a external 2TB hard disk connected.
For whatever reason i cannot get any faster transfer rate then 2mb/s when moving files from desktop to the HD.
Most times it is just barely getting 1mb.
This is over the regular windows network, maybe that is the main issue?
Any help would be much appreciated.

Sevy wrote:
I managed to fix the speed issue from the router to the PC.
Though still unsure why wired the transfer rate is so slow.
From the drive to the desktop i get about 18mb/s which isn't to bad.
But from the PC to the drive its now getting just below 10mb/s.
Check if the slow wired transfer speed happens on all wired devices in the network. Upgrade the firmware of the router as well.

WRT54G ver 7 speed issues.

Hi all.
Let me go through the issue I have come across tonight. I have a WRT54G version 7 cable router, and I have Telewest as my ISP, with the 4Mb service. My computer is hard wired into the router, and have no wireless clients connected at the time. I get packet loss, (quite a bit) and my download speeds are abismal. Setting my computer to dhcp or fixed IP makes no difference. I even forced 100 Full duplex on the LAN card just to be sure. I phoned up TW tech support, and they were pretty helpful, and asked me to bypass the router, and plug directly into the modem and turn dhcp on my pc and reboot the modem.
All works fine, no speed issues, download test from here is perfect. They asked me to download something off their server here http://gamefiles.blueyonder.co.uk and I am getting full 480kB/s And here is the test plugged right into the modem http://www.thinkbroadband.com/speedtest/results/id/117018476054017621619.html
Happy days, right? Problem with the router, right?
Well.. It gets interesting.
I then do a firmware update on the router, reset it to factory defaults, and re-run the test going through the router. Here is the pitiful result., which is the same as before. http://www.thinkbroadband.com/speedtest/results/id/117018491367303621734.html
Ok... so problem with the router still... right?
I tried the blueyonder file download, and guess what... 480KB/s again, downloaded a 5 meg file in about 12 seconds.
What I have tried:
Forcing the LAN to 100Meg full duplex
Firmware upgrade on the router
Reset router to factory defaults
Rebooted pc, router and modem at the same time.
Use a static IP with correct settings (same speed)
Use DHCP through the router
Connected directly to the cable modem and use DHCP (works fine)
PC windows xp SP2 fully patched.
No software firewalls. (at any time)
Disabling UPNP on the router
Turned flow control off on the LAN adapter (shouldnt be on in the first place, thats half duplex >.)
I cant see why my computer downloads from blueyonder fine with no speed issues at all, and yet any other website, I get extremely poor performance. This router has been working fine for about a month now, just needed a few reboots once in a while, but which router doesnt. My upload speeds seem pretty constant, and dont seem to vary regardless of router or not. Seems like inbound traffic is getting jammed.
Anyone able to shed some thought? Sorry for the wall of text, just thought I would let you know everything on the first post instead of having to reply a dozen times.

try TCP Optimiser .. This should adjust the MTU settings of the NIC on the PC ...

Broadband Speed issue(s)

So, i've been having issues with my broadband speed for around a year and you've sent out 7 engineers to "definately this time, no doubt about it Mr. Ritchie fix it this time" ... FINALLY just over a week ago, the issue seemed to be resolved and i was getting acceptable STEADY sppeds of around 3MB. Last night, to my dismay the issue returns AND my phone line is out of order (constant hi-lo tone) though i am getting a slow/intermittant broadband. I called and their answer was, can you guess? "send an engineer!" ... SERIOUSLY???? You'd think the other 7 previously that said the issue was at the exchange would have been enough?? (or am i being unreasonable after almost a year, 7 Engineers and countless hours being re-assured by someone from India that "it will be fixed definately this time, Mr Ritchie, I understand it must be frustrating..." AARGH!!!

So, i missed a call and received this reply...
"I tested your line today and it's showing a sync speed of 2880 kbps with an IP profile of 2500 kbps, so it looks like that has improved since the weekend. I also checked your line and couldn't find a problem with it at the moment.
Were you having some bad weather when this fault occurred? If the fault is intermittent, it may be related to some bad weather if a joint gets wet."
Yes, the line speed is GREAT during the day, but come 5pm it drops dramatically, especially Ping responce in online games!
The line is back up and running (about 30 mins after i posted); there was some heavy rain, but "joints getting wet", don't Cod Liver Oil capsules get rid of that? ;p
The speed was fixed for a couple of weeks (something about changing me to a new card/profile or something) but now it appears to have reverted back to it's old ways ...
rgds,
Kev.

Issues fixed in FM 7.1 release

Adobe FrameMaker 7.1 for English, French and German was released on January 10, 2004. The following is a list of issues fixed in this release.
250374
FDK: FA_Note_PreSetAttrValue notification not sent for new elements. If a client subscribes to FA_Note_PreSetAttrValue events, it will get a notification when one changes an attribute by double clicking it in the Structure view. However, on creation of a new element through the element catalog, if an attribute is set, no notification is sent.
This issue has been resolved.
277554
FDK: F_ApiUnStraddleCells() does not work as expected.
When unstraddling cells through the API, all the cells except the leading cell have no paragraph end marks (they are completely empty). Clicking into such cells takes the text cursor to the location of the table anchor. Inserting a character into the paragraph with the table anchor seems to correct the table.
This issue has been resolved.
310049
FDK: F_ApiImport shows a dialog upon import of SGML entities.
When importing an SGML fragment by reference using F_ApiImport, FrameMaker displays a dialog asking whether the text inset should be updated automatic or manually. This setting should be controlled from import-parameters.
Currently there is no way of creating a client that imports a large number of SGML text-insets without having a user sitting by the keyboard and clicking OK for each imported entity.
This issue has been resolved.
314764
FDK: F_ApiDelete does not work properly on elements inside a TextInset. When you try to delete an element that is part of a TextInset, the whole TextInset is removed.
The work around for this is to unlock the text before calling F_ApiDelete and to lock the text after this call. The calls to unlock and lock the text are given below:
To unlock - F_ApiSetInt(docId, insetId, FP_TiLocked, False);
To lock - F_ApiSetInt(docId, insetId, FP_TiLocked, True);
387821
Microsoft Intellimouse Scroll wheel locks up FrameMaker when it's pressed or scrolled.
This issue has been resolved.
408675
Rotated PDF files do not appear on 24-bit or 32-bit displays.
This issue has been resolved.
463533
Non-unique ID tags cause inconsistent hypertext links due to multiple entries in the HTML export. If there are conflicting IDs in different documents of a book, non-unique ID tags are generated which cause this behavior.
This issue has been resolved.
507486
If you edit the MAKER.INI file by adding the line SplashScreen=Off, in the [Preferences] section, then the Help->About command crashes FrameMaker with Internal Error: 7004, 6048898, 7639747, 0
This issue has been resolved.
529757
(don't include) Marker element gets included and merged in PDF bookmarks with previous heading. In FrameMaker 6.0, the document prints to PDF as expected--the bookmarks in Acrobat PDF contain the Section2/Heading as expected, such as:
Spark Plug Threads
and Lamp Base and Electrical Fixture Threads
In FrameMaker 7.0, the document prints to PDF with the Section2/Heading merged with the Run.head marker element, even though Run.head is in the ''Don't include'' list of elements in the PDF Setup dialog box.
This issue has been resolved.
534856
The value of DPDFOpenBookmarkLevel is ignored when read in a MIF file.
This issue has been resolved.
534865
The values Default, All, and None of the ''Bookmarks expanded through level'' field (in Format > Document >PDF setup) are not retained when a FrameMaker document is saved and opened again.
This issue has been resolved.
535630
Windows Metafile (wmf) graphic (created from Microsoft VISIO 2002) causes "an error occurred while printing" but partially prints.
This issue has been resolved.
537955
ISOdraw CGM graphics and tables on the same page cause CGM stroke lines to be printed in White.
This issue has been resolved.
540408
Inconsistent dialog behavior between FrameMaker 6.0 and FrameMaker 7.0 when opening filename.sgm. Unlike FrameMaker 6.0, FrameMaker 7.0 displays the Unknown Filetype dialog.
This issue has been resolved.
540417
Inconsistent dialog behavior between opening filename.sgm and filename.sgml.
This issue has been resolved.
541912
TaggedPDF:fmpdfreflow plug-in - display of PDF file not good for shaded table cells. When table cells have shading in them, the PDF file does not show all the content of the shaded cells. This happens on Windows only.
This issue has been resolved.
565678
PDF generation on UNIX translates CMYK colors to RGB.
This issue has been resolved.
567784
FP_InsetFile has a value of "BadFileName" when SGML importing misses a graphic data file. If you import an SGML file that would read external graphic files and these data files are missing, then skipping or ignoring them results in "BadFileName" pathname for each object property. This makes FDK API Client not get FP_InsetFile property value for the FO_Inset object.
This issue has been resolved.
569092
FrameMaker7 server can't find default printer when launched as a service.
This issue has been resolved. To suppress the errors during initialization e.g.. No Default printer, invoke FrameMaker with the -silent option.
569969
When the Paragraph Designer is open, you can't switch to open documents using the book window.
This issue has been resolved.
581376
FrameMaker works very slowly or returns an internal error. When processing a document that includes many EPS image files, FrameMaker creates many FRMxxxx.tmp files in the C:\Documents and Settings\Account Name\Local Settings\temp\ folder. The xxxx is a hexadecimal number. Even after quitting FrameMaker, the FRMxxxx.tmp files are NOT deleted, and the same document creates different FRMxxxx.tmp files after being opened again. The template files pile up in the hard disk for the Account/user, until the xxxx reaches ffff, the maximum number for the 4 digits of a hexadecimal number. At or near this time, FrameMaker works very slowly or stops with internal error:7004,6643018,6765315,6712018.
This issue has been resolved.
581522
Imported PDF document with transparencies does not print correctly.
This issue has been resolved.
584633
Internal Error: 7004, 6055410, 7657059, 0 when saving/printing to PDF includes Bookmarks that include index elements. The crash occurs only on Windows. The problem occurs when you attempt File > Print to PDF, when you want to Generate PDF Bookmarks based on structure elements, and have the ''Sectlevel1'' element in the ''Include Elements'' pane, and that particular ''Sectlevel1'' element plus the length of the text in the index marker entries exceeds 256 characters.
This issue has been resolved.
589859
Post installation of Distiller 6.0, .tps file gets retained along with PDF and log file.
This issue has been resolved.
592974
Opening a large XML file in FrameMaker generates error 'Internal Error 7004, 6052770, 0....
When an XML file contained more than 65520(FFF0) children elements, FrameMaker crashed.
This issue has been resolved.
595875
Spell check skips elements, loops around elements, or gets completely stuck.
This issue has been resolved.
597276
The Save as PDF command does not create a PDF file (for certain files) when Generate Tagged PDF is ON
This issue has been resolved.
598056
Group4 fax encoded TIFF files imported in FrameMaker 7.0 don't display nor print--does not occur in previous versions.
This issue has been resolved.
600053
Display/Scrolling performance is very slow with documents having TIFF images imported by copy.
This issue has been resolved.
600497
Scrolling a document in FrameMaker using Page Up/Down button goes to previous/next page respectively. Scrolling a document using Page Up and Page Down button goes to the previous and next page respectively. User would expect to scroll to the previous/next screen instead of going to previous/next page using these buttons, as seen in other Windows applications like MS Word, etc.
This issue has been resolved.
601470
Links being dropped in SVG filter. Import an SVG file by reference (and the imported file has a link to another SVG file). Save this and reopen; the referenced SVG file is missing.
This issue has been resolved.
603668
The text in the markers gets included in the PDF Bookmarks. Do not include textual content of marker elements, such as Index markers. This is because if you do, the Acrobat bookmarks can appear created if the element has:
where Indexterm contains the marker text:
<$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDF
... You will end up with an Acrobat Bookmark containing:
How To Create <$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDFGood PDF ... which is not desirable.
This issue has been resolved.
606704
In Server Setup dialog box, user name of the form "domain\username" does not allow names starting with b, r, etc. While trying to get FrameMaker to talk to the WebDAV server, which is using Windows authentication, when we specify a user name of the form "domain\username" in the "Server Setup" dialog box (File | Workgroup | Workgroup Servers ...). For some user names this works; for others it doesn't.
This issue has been resolved.
607610
Framemaker crashes when Print is selected twice from the context menu for a book.
This issue has been resolved.
610099
Drop Caps are not imported as TextFrames (RTFImport).
This issue has been resolved.
610600
Words on which cross references are created are getting dropped while importing doc file (Word2000Import). Create a cross reference on some word in MS Word, and import the doc file into FrameMaker. The word on which the cross reference is created is getting dropped.
This issue has been resolved.
611165
Words on which cross references are created are getting dropped while importing rtf file (RTFImport). Create a cross reference on some word in MS Word, and import the rtf file into FrameMaker. The word on which the cross reference is created is getting dropped.
This issue has been resolved.
611802
Text which is rotated is lost when exporting to RTF.
This issue has been resolved.
611900
FrameMaker locks referenced files until the application closes.
This issue has been resolved.
613546
The filter name in the unknown file type for import is Microsoft RTF whereas for Export it is Microsoft RTF 1.6.
This issue has been resolved.
616153
Contents of anchored frames not visible after save as PDF with Tags. After saving a document with anchored frames as PDF with Tags enabled, the contents of the frame are not visible in the PDF generated.
This issue has been resolved.
624470
footnote element mapping to Frame Footnote is commented in Rules defined for XDocBook. In application definition of XDocBook in $FMHOME/structure/xml/xdocbook/app, footnote element mapping is to FM Footnote element. However, this rule is commented since past few releases. As a result, any (xdocbook) XML document with footnote is shown as invalid in FrameMaker.
This issue has been resolved.
624472
Revision remark (revremark) element is mapped to different element names in EDD and rules. Rules for XDocBook in $FMHOME/structure/xml/xdocbook/app translate revremark to RevRemark. However, EDD (ECM) defines Revremark as mapping for revremark element. Hence a valid xdocbook XML document with revremark is shown as invalid (with unknown RevRemark element) in FrameMaker.
This issue has been resolved.
624517
Unable to open FrameMaker 7.0-created fm file, which is created by importing a Word document.
This issue has been resolved.
625306
Office documents don't open in FrameMaker in absence of write permissions (UNIX).
This issue has been resolved.
626431
For line spacing, values that are beyond range are not mapped correctly (RTFExport). For line spacing in frame document which are beyond the max or min range of RTF, the mapping is not correct and same value of line space I mapped to three different values in RTF.
This issue has been resolved.
626434
For stretch, values that are more than 600 are not mapped correctly in RTF (RTFExport). For stretching in frame doc that are beyond max value in RTF (600), the mapping is not correct. There is no stretching (scaling in RTF) in effect in exported RTF for values greater than 600 specified in frame.
This issue has been resolved.
626450
Current date and time are not getting exported properly and are coming as 0's and XXX (RTFExport).
This issue has been resolved.
627855
After saving as PDF, headings are centered in reflow mode. After a particular file is saved as a PDF file and is viewed in reflow mode in Acrobat, the headings are centered.
This issue has been resolved.
631967
Installer does not recognize existing installation.
This issue has been resolved.
633133
Right indents are not mapped while importing Excel
This issue has been resolved.
633137
Data in the Custom formatted cell is lost while importing excel sheet.
This issue has been resolved.
633462
FrameMaker terminates while exporting to RTF.
This issue has been resolved.
633710
You have to give a filename with extension, while saving a file to RTF.
This issue has been resolved.
638750
A PS file generated from FrameMaker with Tagged PDF on and hypertext marker in the file, cannot be distilled to PDF
This issue has been resolved.
638824
Dialog Box indicating Unsaved changes made to file is not displayed on closing a document after importing an image using drag and drop.
This issue has been resolved.
639220
If you select a Master Page or a Reference Page and select Save as PDF, PDF generation fails without giving appropriate error message.
This issue has been resolved.
641918
When converting a FrameMaker book to PDF: default opening page in PS/PDF may be incorrectly set to be the first page of last chapter in a book.
This issue has been resolved.
642765
On drag and drop of a SVG file into FrameMaker, if you click on the cancel button on the Import SVG dialog, the cancel is ignored and the file is imported.
This issue has been resolved.
643092
If United Kingdom is chosen as the country of purchase, the EULA contains the string "FrameMakerDesktop _USEnglish_1.21.02_17:29".
This issue has been resolved.
644158
Following alerts can not be suppressed via command line option:
. Register now/later/never
. Adobe Online
These can be now suppressed using the -noaol command line option or by using the DisableAdobeOnline=On option in the maker.ini file.
644904
An empty merged cell(256 columns) created in Excel imports as a blank file.
This issue has been resolved.
645230
If you import a Word document having large number of footnotes in FrameMaker, the footnotes are overlapped.
This issue has been resolved.
645538
Cross reference text when exported to RTF has an additional space after the cross reference text.
This issue has been resolved.
645863
When an excel file containing cells applied with custom formatting is imported in FrameMaker, the font and color of these cells is different in FrameMaker.
This issue has been resolved.
646609
When a specific excel file is being imported the data in the first cell is lost.
This issue has been resolved.
646676
When saving a MIF file, then opening it in FrameMaker, the DPDFZoom settings are lost.
This issue has been resolved.
647770
User defined variables with _ in their name when saved to xml and opened again in Frame, round-trip as fmv1, fmv2 ...
This issue has been resolved.
648043
When you try to open/import a file with a name containing more than two % signs and at least 1 non-% character between the second and third % sign then FM gives an error saying the file is non-existent
This issue has been resolved.
648114
Info>Copyright>More crashes FrameMaker
This issue has been resolved.
648434
When you import an RTF file with a cropped image in FrameMaker, it is imported in its original uncropped form.
This issue has been resolved.
649640
When a word document having text with decimal numbering is imported, the sub points (1.1,1.2,...) are imported as (0.1,0.2,..)
This issue has been resolved.
650631
When you import a word document having numbering points with comment on each numbered point, the font size of the numbering point is reduced.
This issue has been resolved.
650962
FrameMaker crashes on scaling any anchored frame on reference pages.
This issue has been resolved.
652229
When you import a word file with ascending raised/lowered baselines then they are not imported correctly.
This issue has been resolved.
652433
When you import an excel file containing date formatting having mm format, FrameMaker inserts an extra zero before the date.
This issue has been resolved.
652752
If you install FrameMaker from network, the short cut to readme file opens it in notepad.
This issue has been resolved.
652794
The alert Inconsistent settings in Book" during F_ApiSilentPrintDoc() can not be suppressed.
This issue has been resolved.
654309
When you import a word document having numbering (1.1,1.2,..) placed after some non-decimal numbering(1,2,3), FrameMaker imports it as (3.1, 3.2,..).
This issue has been resolved.
654348
When you save an inline image as .doc in Acrobat6 and import this word file in FrameMaker, FrameMaker enlarges the graphics on import.
This issue has been resolved.
655072
When you have an user defined variable in the frame document as well as the template, you save this document as XML and open the XML file again in frame, the template definition overrides that of the document.
This issue has been resolved.
655726
Full license number is displayed in the Help>About FrameMaker 7.0 screen.
This issue has been resolved.
656171
Full license number is displayed in the FrameMaker 7.0 Splash screen.
This issue has been resolved.
656820
If you zoom or move frames after importing a graphic in FrameMaker, Framemaker logs out the user from Unix machine.
This issue has been resolved.
657053
If a frame document displays images from the reference page and you simultaneously open multiple such documents, then the images from the document opened first can replace the images in the other documents
This issue has been resolved.
658744
If you open an XML file locked by some other application, FrameMaker shows a Validation Error dialog box. For this to work, the XML locking feature should not be switched off.
This issue has been resolved.
658749
The German version of Online manual xmlcss.pdf has comments in it.
This issue has been resolved.
Known Issues
The printed user guide, on-line help and QRCs will not change between the FrameMaker 7.0 release and FrameMaker 7.1. Certain online manuals will be updated, and a new online supplement will be added to cover user documentation of the new release.
[Original message from Forrest_F accidentally deleted when Forum re-organized]

Read this SAP Note - Note 1487853 - SAP NetWeaver MDM 7.1 SP07 Release
or refer the link
http://help.sap.com/saphelp_mdm71/helpdata/en/4d/885f32b97d14aee10000000a42189c/content.htm
Similaryly read for SP06 fixes at - http://help.sap.com/saphelp_mdm71/helpdata/en/be/e0048b426b4c20957078b61ec71e46/content.htm
These links gives you an idea of what all changes are going to come into your new system. So unless you upgrade to SP07 i.e. the latest version and test it in DEV/Sandbox environment you should not plan to move ahead in Production. This is always recommended but there is very less chance that the already working solution will not work as expected after the upgrade.
Thanks,
Shambhu.

Speed Issues

Greetings and Salutations,
I'm having speed issues with my Adobe AIR application. From what I've read on the web, AIR is supposed to be fast at drawing graphics. I am writing an application which has multiple screens. On one of the screens I have a tab (SuperNavigator) which has a canvas on it. That canvas has a series of other canvases (built with a repeater) that have graphics in them. I am having speed issues when I have more than 50 of these children canvases. I've tried running it without the graphics (code below is without the graphics) to see how it performs. When I have 954 of these canvases being drawn it takes about 2.5 minutes to draw. This is unacceptable and I'm wondering if this is something I've induced or if AIR was never meant to handle such a large amount of canvases (actually this isn't a large amount, in a real world environment there could be a lot more). I've included relevant clips from the code. There are a couple empty boxes that in the real application will hold graphics.
The class withing the Tab Navigator is a canvas.
In the action Script (the setter line takes 2.5 minutes to get past) (it's binding to the repeater that seems to be my problem).
[Bindable] private
private var _assetList:Array;
[Bindable]
public function get timelineAssetList():Array{
     return this._assetList;
public function set timelineAssetList(ac:Array):void{
     this._assetList = ac;
The MXML code that is being bound to:
<mx:Canvas id="labelCanvas" left="0" right="0" top="0" height="65" verticalScrollPolicy="off" scroll="scrolling(event)">
      <mx:HBox horizontalGap="1" left="10" right="10" top="10">
          <mx:Spacer width="2"/>
            <mx:Canvas width="{getHeaderWidth()}" height="40" borderStyle="solid" borderColor="{StaticVariables.borderColor.getColorUint()}" horizontalCenter="0">
            <PastDataView:ColorBarScale id="scale" bottom="10"/>
     </mx:Canvas>
          <mx:Canvas width="20" height="40">
               <mx:Spacer width="20" />
          </mx:Canvas>
     </mx:HBox>
</mx:Canvas>
<mx:Canvas id="assetCanvas" left="0" right="0" bottom="0" top="65" scroll="scrolling(event)">
     <mx:VBox y="10" right="16" left="10" verticalGap="0">
          <mx:Repeater id="assetRepeater" dataProvider="{timelineAssetList}">
               <mx:HRule width="100%"/>
               <PastDataView:ColorBarBar id="barArray" width="100%" height="170" asset="{assetRepeater.currentItem}"/>
          </mx:Repeater>
     </mx:VBox>
</mx:Canvas>
The ColorBarBar consists of:
<?xml version="1.0" encoding="utf-8"?><mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="400" height="300" xmlns:PastDataView="org.XXXXXX.CenterScreen.PastDataView.*" horizontalScrollPolicy="off" click="clicked()">
     [Bindable]
     public static var _colorBarHeight:int = StaticVariables.colorBarHeight;
     [Bindable]
     private var _asset:Object;
     [Bindable]
     public function set asset(a:Object):void{
          this._asset = a;          getBackgroundColor();
     public function get asset():Object{
          return _asset;     }
      private function getBackgroundColor():void {
          var color:String = asset.color;
          if (color == null) color = "Black";
          if( color.toLowerCase() == "blue" ) {
               lblAssetTag.setStyle("color", 0x1674cc);               lblAsset.setStyle(
"color", 0x1674cc);          }
else if( color.toLowerCase() == "red" ) {
               lblAssetTag.setStyle("color", 0xe35353);               lblAsset.setStyle(
"color", 0xe35353);          }
else if(color.toLowerCase() == "grey" || color.toLowerCase() == "gray") {               lblAssetTag.setStyle(
"color", 0xe55555);               lblAsset.setStyle(
"color", 0xe55555);          }
else { // give it a default color                lblAssetTag.setStyle(
"color", 0x000000);               lblAsset.setStyle(
"color", 0x000000);          }
      private function calculateActivityRepeaterHeight():int{
          return this.height-50-_colorBarHeight;     }
      public function clicked():void{
          dispatchEvent(new SelectAssetEvent(this._asset, false, false, true));     }
     ]]>     </mx:Script>
       <mx:VBox left="0" top="0" right="0">
           <mx:Spacer height="1"/>
           <mx:HBox>
                <mx:Spacer width="2"/>               <mx:Label id="lblAssetTag" text="{asset.type}: " fontWeight="bold" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/> id="lblAssetTag" text="{asset.type}: " fontWeight="bold" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/> id="lblAssetTag" text="{asset.type}: " fontWeight="bold" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/>
               <mx:Label id="lblAsset" text="{asset.name}" fontSize="12" doubleClickEnabled="true" doubleClick="titleClicked()"/>
                <mx:Label id="lblAssetId" text="{'(' + asset.id + ')'}" fontSize="12" visible="{mx.core.Application.application.debugMode}"/>
           </mx:HBox>
          <mx:HBox horizontalGap="1">
                <mx:Spacer width="2"/>
                <mx:Spacer width="10" />
                <mx:VBox width="100%">                    <mx:VBox>
                    </mx:VBox>
                    <mx:VBox id="displays" verticalScrollPolicy="auto" height="{calculateActivityRepeaterHeight()}" horizontalScrollPolicy="off">
                    </mx:VBox>
               </mx:VBox>
          </mx:HBox>
          <mx:Spacer height="2"/>
      </mx:VBox></mx:Canvas>
I would appreciate any thoughts or feedback you could provide.
~martin

The Canvas is a very heavy object that has lots of overhead. Even worse is the VBox object that is in there multiple times.
What exactally are you trying to accomplish? Just looking over the code, it seems that the same could be done directly with the Graphics API, at a much faster rate.
For each of the VBoxes and Canvases you have, the entire size of each child and parent need to be re-evalulated each time you add or change something. This is a HUGE overhead, and probably why the app is running so slow. You may need to convert this app to use simpler objects (UIComponent or something lower-level like that) to get any speed.
Are you using Flex Bulder? Take a look at the app while the Profiler is running to see what I'm talking about.

Iteration Speed issue when Indexing 3D array wried to a while-loop

Brief Description of my Program:
I am working on the real-time signal generation by using LabView and DAQmx (PCI-6110 card). My vi reads the big data file (typically 8MB txt file containing about 400,000 samples (complex double precision). Then, the signal is pre-processed and I end up with a huge 3D array to feed while-loop (typically 3D array dimension is N x 7 x M where N & M >> 7). Inside the loop, that 3D array is indexed and processed before the results are written to the DAQmx outputs. I have a speed issue when indexing the large 3D array (i.e, 3D array having a large sub-array size). My while-loop could not run fast enough to top-up the DAQmx AO buffer (at the output rate of 96kHz). It could run faster only if I use smaller 3D array (i.e, smaller-sized sub-arrays). I do not quite understand why the size of 3D sub-array affects the rate of looping although I am indexing same sub-array size at each iteration. I really appreciate your comments, advices and helps.
I include my 3D array format as a picture below.
Question on LabView:
How does indexing an 3D array which wires to the while-loop affect the speed of the loop iteration? I found that large dimension of sub-arrays in the 3D array slows down the iteration speed by comparing to indexing the same size of sub-array from smaller-sized sub-arrays of the 3D array to perform signal processing inside the while-loop. Why? Is there any other way of designing LabView Program to improve speed of iteration?
attachment:

Thank you all for your prompt replies and your interests. I am sorry about my attachment. But, I have now attached a jpg format image file as you suggested.
I had read the few papers on large data handling such as "LabVIEW Performance and Memory Management". Thus, I had already tried to avoid making unnecessary copies of data and growing arrays in my while-loop. I am not an expert on LabView, so I am not sure if the issues I have are just LabView fundamental limitations or there are any other ways to improve the iteration speed without reducing the input file size and DAQ output rate.
As you request, I also attach my top-level vi showing essential sections such as while-loop and its indexing. The attached file is as an image jpg format because the actual vi including Sub-VIs are as big as 3MB in total. I hope my attachment would be useful for anyone who would like to reply my question. If anyone would like to see my whole vi & llb files, I would be interesting to send it to you by an e-mail privately and thus please provide your e-mail address.
The dimension of my 3D array is N x 7 x M (Page x Row x Column), where N represents number of pages in 3D array, and M represents the size of 1D array. The file I am currently using forms 3D array of N = 28, & M = 10,731. Refering to the top-level vi picture I attached, my while-loop indexes each page per iteration and wrap-around. The sub-VI called "channel" inside the while-loop will further index its input (2D array) into seven of 1D arrays for other signal processsing. The output from that "channel" sub-VI is the superposition of those seven arrays. I hope my explaination is clear.
Attachement: 3Darray.jpg and MyVi.jpg
Kind Regards,
Shein
Attachments:
3Darray.jpg ‏30 KB
MyVI.jpg ‏87 KB

Top 15 Issues/Fixes Needed in the next Premiere Pro release/update (CS6.5 or CS7)

I’m excited for what’s coming next in Premiere Pro CS6.5 or CS7 (whichever update is next). As a former FCP7 user myself, Premiere CS6 was a quick and necessary switch (especially after changing the main keyboard shortcuts back to what I was used to). I’ve since gone back to FCP7 on occasion for certain things and I can tell you that I’m so glad I’ve switched. For all the headaches and serious errors that I still get daily/weekly with Premiere Pro CS6, it’s still definitely a big step up. I'm encouraged by staff members like Mitch W. that have expressed confidence that many of these issues will be resolved in the next release. Here is my personal list of “Top 15 issues/fixes” needed in the current Premiere Pro CS6…
(Adobe STAFF...feel free to print this out and hand it to the engineers responsible for making changes )
1) The infamous multicam FLAW. Needing no introduction…when you are editing your video in the multicam window and you hit pause or stop Premiere has decided that’s a great time to make a cut on your timeline and also switch angles back to the original angle whether you like it or not. You cannot stop ever while editing multicam without Premiere making these unwanted cuts and angle changes. Awful. Multicam in PPro is otherwise pretty nice, but this issue is terribly counter-productive especially when you are editing longer complex multicam sequences. Imagine if every time you hit pause or stop in the regular timeline it made a cut there and switched clips. Ugh. You get my point.
2) The audio meters/levels do not work while in the multicam window. A staff member in the forums (I think it was you) said this was a bug. Hope it will get fixed. The audio levels work in every other window and its essential to be able to keep an eye on the levels while editing multicam.
3) Ticktime.cpp-207 error. Ugh. What a nightmare. I have confidence that it will be fixed soon. Mitch W. from the forums is my new hero for taking on this error. How to replicate it?…simply have 6 (or 7) or more clips with the warp stabilizer effect added on the same timeline as a nested multicam clip and you get this error upon reopening your project. The more warp stabilizers you use, the more times you’ll have to hit “continue” to get through the error before you can open your project or export it to AME. I deal with this every single day because all my projects use these two elements. Most of my projects I have to hit “continue” on the error message upwards of 350-450 times to open my projects. Gets old fast.
4) Icon View order control. When you display all your clips in icon view instead of a list view (In the project window), there is no metadata to allow you to put the clips in order somehow (or at least maintain the order that you have in the list). There are roundabout workarounds, but c’mon.
5) Warp Stabilizer fixes…it is an AMAZING tool (far, far, far better than smoothcam in FCP7) BUT…it has it’s issues. Since I use hundreds of times/week (no exaggeration) I know it’s functions/flaws really well. The issues with Warp Stabilizer:
a) #3 above
b) Toggle OFF the effect after it’s applied and then hit Analyze again and PPro crashes. (easy to avoid but annoying bug)
c) If a clip is in the middle of stabilizing (not just analyzing…but the final step labeled “analyzing”) when Auto-save comes up…most of the time PPro freezes and crashes.
d) The DEFAULT “method” (in the settings for Warp Stabilizer) should NOT be “Subspace Warp”…it should be “Position, Scale, Rotation”. Why? It’s FAAAAARRRR better and more efficient. 95 out of 100 times it causes MUCH less “wobble” in the final stabilized clips AND most importantly 95 out of 100 times it scales the video less. Way better method.
6) The ability to open multiple projects simultaneously. As simple as FCP7 had it…or even better…as cool and efficient as FCPX does it would be nice.
7) The ability to mark a clip and not just a point on a timeline (because if you move the clip, the marker doesn’t go with it). I know you can use “Clip Marker” but it's very limiting, can't be moved, can't add notes, can't advance to the next marker (as far as I know). Also a marker list like FCPX has would be nice so you can see your markers all in a list at a glance and adjust them as needed.
8) Ability to select a clip in the Project window and find out where it’s used in the timeline. I LOVE how you can do the reverse and take a clip in the timeline and “Reveal in Project Window” but it would really help to go the other way around. Dealing with several hundred clips for every project I’ve missed this feature from time to time (FCPX handles this really well).
9) Add a through-edit indicator in timeline and “re-join clips” option. If you cut a clip but keep both clips together it’s just one continuous clip. But I really hope Premiere adds the not only an indicator of some sort (like FCP7′s way of having two small red triangles facing each other on that cut) so you know it’s one continuous clip BUT ALSO the ability to right-click and “re-join” the two clips into one.
10) When clip is double-clicked in timeline, CTI position in source viewer should match location in timeline. This one is pretty annoying and a fix would be incredibly helpful. The way it is now is very counter-productive. Definitely hope this gets fixed ASAP.
11) Better border controls for images/videos. Can’t do much with images right now in PPro. At least allow to customize the color and size/strength of it’s borders and shadows.
12) Better support for Mac/Apple's top end computers/GPU's. I'm still surprised that 2011 top of the line iMac cards (AMD 6970M) that have 2gb of ram are not supported. I’m sure/I hope 2012 iMac’s will be supported with their new Nvidia GPU’s…but I’ll hold out hope that the top iMac (up until 3 months ago) is supported at least at it’s full power. All around better Mac support would be great considering the wave of new users coming over from FCP.
13) Opacity/Transparency issues with EXPORTED videos with Cross Dissolves, etc. For some odd reason videos exported from Premiere CS6 have issues with cross dissolves or minor transparency. I’ll try to explain…in the program window of PPro CS6 cross dissolves look fine. Also, if you take a clip and stack it on top of another clip and put the top clip at say 99% opacity instead of 100 it looks like it should in PPro. But, if you export the clips you’ll quickly see that there are issues. It’s almost like the exported videos dissolve from 5 to 95. They skip the subtle beginning (0-5%) and subtle end (95-100%) of any fade. A clip in PPro as described above that is on top of another but set at 99% will look more like 90-95% in the exported file ESPECIALLY if the two clips are contrasting (eg. top layer dark, bottom layer with bright elements). It’s like the opposit of ease-in/ease-out. I have to ease-in/ease-out of every dissolve to avoid this issue…and even then, it’s not THAT much of an “ease” as one would hope. Another user in a forum once posted a video that shows how abruptly exported videos end their transparency changes…see: THIS SAMPLE VIDEO Perhaps this is a GPU/processing issue with AME vs. Premiere Pro but whatever it is, it should be fixed so videos you export look like the videos you edited!
14) Better control in Creative Cloud over which devices are “activated/deactivated” We have 3 computers and it would be nice if one could log in to their Creative Cloud account and see a list of which devices they have and just toggle on/off which one’s are activated/deactivated. This is especially helpful when you are mobile and forget to deactivate one of your two home/office devices so you’re stuck now until you get back to the home/office to deactivate it. This is not a Premiere thing, but just a general wish.
15) Ability to sync multicam clips automatically using the audio. Plural eyes apparently does this well. Would be nice to have it built into Premiere like FCPX does. Select all the shots you want to sync, One button click, wait a few seconds, done.
That’s my top 15. Everything else is awesome in my opinion for what I do 10 hours a day 6-7 days a week. I’ve included bug reports/feature requests for all of these at one point but if you are someone else reading this go to the following link and ask for these issues to be fixed: FEATURE REQUEST/BUG REPORT
I wish Adobe did smaller updates more often. Because even if they were smaller updates, we’d at least know you are working on fixing some of these issues that have plagued this NLE for years. Holding off fixes for one or two big “updates” every year is tough to deal with in a world of the ever updating apps we live and play with daily on our phones. I realize Premiere is a much larger scale and far more professional than a phone app, but hopefully you get my point. Here’s to hoping the next release (NAB 2013?) resolves all my top 15 issues. Here’s to hoping that these issues will be resolved sooner than later so I can stop raising hell in various forums. I’m honestly ready to start praising and defending Premiere Pro instead of griping about it’s bugs and flaws. It’s a fantastic program “on the way” to being the best. I hope.

Nice list, however it does seem a little bit like you may be hoping that Adobe provides the Final Cut 8 package that Apple never delivered on. Having edited primarily with P-Pro for the last decade, I hope Adobe focuses more on getting the next release to run as smooth as CS5x does, strangling and crucifying all the codec and playback bugs that arose in CS6. To me, it appeared that too many of the changes in CS6 were semantic or cosmetic, meant to give a FCP user more familiarity. Why change the name of an edit function from "overlay" to "overwrite" after 15 years? Because it enhances the product, or because that is what Apple called the function in FCP? If Adobe renames the Program Monitor to the "Canvas" with the next release, I think that I might be sick. There were nice additions to the Creative Suite as a whole, but I hope the next Premiere release reverses some missteps made in CS6, and focuses more on stability and enhanced functionality. I also really hope that they have an open ear towards criticism; Apple did not and their users ended up with FCP-X
It saddens me that the fixes I want most in a future release were purposeful changes between CS5x and CS6x.
1) Provide the options for transport controls in the source and program monitors. All of the users at my office hate that the jog and shuttle were removed in CS6. JKL was an option prior to CS6 and if we liked it we would have used it. I keep reading the justification that this change was meant to save space and streamline the UI. I can't express cordially how much this bothers me to look at the empty wasted space in my CS6 UI where the transport controls should be. The experiment has gone on long enough.
2) Restore the 3 Way Color Corrector to its previous functionality. The 3 way color corrector has been effectively neutered in CS6. Where in CS5x and earlier releases one could separately target the input/output levels of Highlights, Midtones, and Shadows, CS6 has only a master input/output level control. Why is less control better? Is it a 3-Way Color Corrector or a 1-Way Color Corrector?
3) Restore Clip and Timeline markers to their previous functionality. I don't even.... I can't. A user shouldn't have to do work arounds to create a modicum of functionality. This again was an attribute that wasn't broken in earlier releases.
4) Simplify the the task of pasting media into a targeted track. As it is now, pasted items will always go to the lowest activated track instead of the targeted track.
Lastly I would like the Adobe Premiere teams to consider what an amazing accomplishment Premiere CS5x was. Upon CS5's release, a good portion of competitor's workflows became obsolete. CS5.5 refined, stabilized, and expanded functionality.
CS6 changed the UI around, moving or deleting buttons, changed keyboard shortcuts, and renamed functions. Oh, and added hoverscrub, you know...like FCPX. In exchanged there was loss of functionality, stability issues and broken codecs.
I really hope the next release is more like CS5x and less like FCPX

Home Hub 3 Speed Issue

Some 6 weeks ago I had an issue with losing my internet connection completly, and eventually after a long session with the help desk I magaged to reconnect using the direct port on the main phone socket. However since then I have had a speed issue and Ive been only getting speeds in the order of 2.3Mb.
However running the BT speed test tells me that the connection to my Home Hub 3 is running at 8.13Mb, but the connection to my computer is running at 2.18Mb.
I have tried every thing I can think of. Followed all the advice to improve the connection but nothing works. Reseting the Home Hub, reseting the factory defaults. I've closed down every program running in the background, disconnected the rest of the hardwired network, fitted a new shorter cat 6 cable. All to no avail. The speed still stays firmly at 2.18 to 2.15. down and 0.37 up.
Could their be a fault with my Home Hub?
Thaks for any advice.
Roy
Solved!
Go to Solution.

23:38:00, 29 Jul.
( 5932.320000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
23:37:29, 29 Jul.
( 5901.890000) CWMP: session closed due to error: No response
23:37:28, 29 Jul.
( 5900.920000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
23:37:28, 29 Jul.
( 5900.910000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
23:37:28, 29 Jul.
( 5900.480000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
23:37:24, 29 Jul.
( 5896.840000) DSL is down after 2 minutes uptime
23:37:24, 29 Jul.
( 5896.840000) ETHoA is down after 2 minutes uptime
23:37:24, 29 Jul.
( 5896.200000) PPPoA is down after 2 minutes uptime [Waiting for Underlying Connection (WAN DSL - Up)]
23:37:20, 29 Jul.
( 5892.820000) PPP LCP Send Termination Request [User request]
23:36:35, 29 Jul.
( 5847.820000) CWMP: session completed successfully
23:36:34, 29 Jul.
( 5846.940000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
23:36:32, 29 Jul.
IN: BLOCK [16] Remote administration (TCP [116.10.191.167]:6000->[81.154.29.9]:22 on ppp0)
23:36:32, 29 Jul.
( 5844.670000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
23:36:32, 29 Jul.
( 5844.660000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
23:36:32, 29 Jul.
( 5844.050000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
23:35:08, 29 Jul.
( 5760.150000) CWMP: session completed successfully
23:35:07, 29 Jul.
( 5759.850000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
23:34:55, 29 Jul.
( 5746.980000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
23:34:55, 29 Jul.
( 5746.970000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
23:34:48, 29 Jul.
( 5740.780000) PPP IPCP Receive Configuration ACK
23:34:48, 29 Jul.
( 5740.580000) PPP IPCP Send Configuration ACK
23:34:48, 29 Jul.
( 5740.580000) PPP IPCP Receive Configuration Request
23:34:48, 29 Jul.
( 5740.290000) PPP IPCP Send Configuration Request
23:34:48, 29 Jul.
( 5740.290000) PPP IPCP Receive Configuration NAK
23:34:47, 29 Jul.
( 5739.870000) PPP IPCP Send Configuration ACK
23:34:47, 29 Jul.
( 5739.870000) PPP IPCP Receive Configuration Request
23:34:47, 29 Jul.
( 5738.990000) PPP IPCP Send Configuration ACK
23:34:47, 29 Jul.
( 5738.990000) PPP IPCP Receive Configuration Request
23:34:45, 29 Jul.
( 5737.420000) PPP IPCP Send Configuration Request
23:34:45, 29 Jul.
( 5737.410000) WAN operating mode is DSL
23:34:45, 29 Jul.
( 5737.410000) Last WAN operating mode was DSL
23:34:43, 29 Jul.
( 5735.310000) PPPoA is up - VPI: 0, VCI:38
23:34:43, 29 Jul.
( 5735.290000) CHAP authentication successful
23:34:43, 29 Jul.
( 5735.260000) CHAP Receive Challenge
23:34:43, 29 Jul.
( 5735.250000) Starting CHAP authentication with peer
23:34:43, 29 Jul.
( 5735.250000) PPP LCP Receive Configuration ACK
23:34:43, 29 Jul.
( 5735.240000) PPP LCP Send Configuration Request
23:34:42, 29 Jul.
( 5734.110000) PPP LCP Send Configuration ACK
23:34:42, 29 Jul.
( 5734.110000) PPP LCP Receive Configuration Request
23:34:40, 29 Jul.
( 5732.210000) PPP LCP Send Configuration ACK
23:34:40, 29 Jul.
( 5732.210000) PPP LCP Receive Configuration Request
23:34:40, 29 Jul.
( 5732.090000) PPP LCP Send Configuration Request
23:34:37, 29 Jul.
( 5729.230000) ETHoA is up - VPI: 0, VCI:35
23:34:37, 29 Jul.
( 5729.230000) DSL is up
23:34:36, 29 Jul.
( 5728.350000) DSL noise margin: 21.00 dB upstream, 10.90 dB downstream
23:34:36, 29 Jul.
( 5728.280000) DSL line rate: 448 Kbps upstream, 8128 Kbps downstream
23:34:12, 29 Jul.
( 5704.670000) CWMP: session closed due to error: No response
23:34:12, 29 Jul.
( 5704.640000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
23:34:12, 29 Jul.
( 5704.630000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
23:33:42, 29 Jul.
( 5674.150000) CWMP: session closed due to error: No response
23:33:41, 29 Jul.
( 5673.000000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
23:33:41, 29 Jul.
( 5672.990000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
23:33:40, 29 Jul.
( 5672.560000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
23:33:36, 29 Jul.
( 5668.110000) DSL is down after 92 minutes uptime
23:33:36, 29 Jul.
( 5668.100000) ETHoA is down after 92 minutes uptime
23:33:35, 29 Jul.
( 5667.670000) PPPoA is down after 92 minutes uptime [Waiting for Underlying Connection (WAN DSL - Up)]
23:33:32, 29 Jul.
( 5664.200000) PPP LCP Send Termination Request [User request]
23:29:51, 29 Jul.
OUT: BLOCK [7] ICMP replay (ICMP type 3 code 1 81.153.31.203->69.171.248.65 on ppp0)
23:28:50, 29 Jul.
( 5382.020000) CWMP: session completed successfully
23:28:48, 29 Jul.
( 5380.950000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
23:28:46, 29 Jul.
( 5378.860000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
23:28:46, 29 Jul.
( 5378.850000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
23:28:46, 29 Jul.
( 5378.230000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
23:26:03, 29 Jul.
( 5215.090000) CWMP: session completed successfully
23:26:02, 29 Jul.
This is some of the event log.

Anyone have list of issues fixed in 8.01? thanx...

Hi all (happy holidays)
Anyone have list of issues fixed in 8.01?
thanx...
ps: I'm on a G5 and was hoping that 8.01 runs noticeably better now....
SvK
Message was edited by: S v K

I'm one of the people that traditionally doesn't experience too many issues with Logic that affect me. However, 8.0.0 and 8.0.1 have many issues that directly affect me, including many MCU handling bugs, screenset handling bugs and quite a few others besides.
Maybe, like with Logic 7, we'll get to a paid update for 8.1 that finally becomes workable... until then, well, hang on to the sides, it may well get bumpy..!

Windows 7 64bit speed issues

Hi,
Our company have been purchasing iMacs for the past 4-5 years and installing Windows XP without any problems. Last year we started installing Windows 7 64 bit onto, the then current, leopard model without any issues.
We have recently purchased a whole batch of i5 iMacs with lion installed. I have installed Windows 7 64 bit without any problems but have started noticing huge slowdown with what seems to be hard drive access o every single machine. Even a single one we purchased when they first came out.
Using Perfmon I cant see any stress on the CPU, GFX card or RAM but there seems to be something odd with the hard drive access. I have stripped Windows 7 down to its bare minimum services removing Aero, themes, and all non essential services but still the speed issues occur.
I have messed around with the pagefile size, indexing, etc, but nothing is having any impact.
For example, when I save a simple spreadsheet the saving window appears in Windows 7 with the spinning circle for around 30 seconds. This is a tiny file, why is it taking so long. Its virtually instant if done on a Windows XP bootcamp machine or even in Windows 7 on an older Leopard iMac.
There really isnt a great deal regarding this problem oin the internet but it has occurred on all the new i5 Lion iMacs we have.
Does anyone have any other suggestions (serious ones ) that I could try?
I am currently installing the 32 bit version to see if it is a driver issue.
Cheers

isn't apple now using propritary drive firmware in 2011 imac?
I suspect 30 sec is drive delay spinup and is frequently happens with green drives, I have some and do this. swap for WD black or something.
www.hardmac.com talks about imac drives

Facing speed issue in my iphone 4, 16gb

Hi Guys
I am facing speed issue in my iphone 4, 16gb. may after updating ios 7, currenly i am using 7.0.4 update.
please help me if anyone have soltion.
Regards
Parveen

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
The iPhone4 runs iOS7 without any issues or performance problems.
Apple does not provide a method to downgrade the iOS on any iDevice. Discussion of such matters in these forums is against the terms of use.

Audio pitch / playback speed issue, MacBook Pro 10.4.10

I experienced a very strange audio pitch and speed issue that affected a recording I was making in Ableton Live 6.0.3.
Setup is MacBook Pro 2.16GHz, Mackie Onyx Satellite FW interface for audio, recording straight to internal HD.
I made two multitrack recordings (3-4 tracks each) which played back fine initially within Live. I then rendered the audio to AIFF in order to burn data and audio CDs.
Testing the playback in iTunes, the audio was strangely pitched lower than what we originally recorded. Checking other tracks from my iTunes library, they were playing back FASTER or higher-pitched than normal, and so did audio streamed from MySpace that I was familiar with.
CDs burnt from these AIFFs exhibited the same "lower pitch" / slower playback.
Reopening the Live Set, they were now also playing back lower pitched than what we had heard just minutes beforehand during the recording / mixing.
After I let the computer sleep for a few hours, I came back and checked -- system and internet audio was now playing back at normal speed, but the Live Set was still lower-pitched - the individual WAV files in the set were all pitched lower.
The Live recording prefs were stock standard - set to record 24 bit WAV at 44.1Khz. Since the issue seemed to affect non-Live audio as well, I'm guessing it was something more at the CoreAudio level?
I managed to salvage the session by taking the exported AIFFs into Tracktion 3 and using the pitch change function in the Clip Properties pane. One track was 1.5x off, the other was 1.125x off.
I'm at a complete loss as to why this would happen. It's a first (and hopefully only) occurrence. Has anyone had this happen to them? Could this be some sort of intermittent hardware (clock) glitch? Something to do with 6.0.3 and OS 10.4.10?
I do need to take this MacBook Pro in for servicing - it experienced the "bulging battery" issue and has a partially dead keyboard (the keys near the upper right) - but even with those issues I've not had audio issues like this.

In any case, if my Mac had problems, I'd send it in for service....!!!
About your problem, I don't think that it depends on hardware.
I'd check Live configuration and the SR of the audio files: you know, Live has so many features to modify speed and a lot of other parameters that bacomes easy to forget something.
Try recording something with Garage Band so you will be sure if there is a real problem.
cheers
rob

Speed Issues Fixed In 9.1.2

Similar Messages

Maybe you are looking for